Apple A1954 Tablet Device User Manual iPad User Guide

Download:
Mirror Download [FCC.gov]
Document ID	3766080
Application ID	mez3P/SoZqQQXFY91Adfsg==
Document Description	Users Manual 7
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	402.57kB (5032152 bits)
Date Submitted	2018-03-01 00:00:00
Date Available	2018-05-01 00:00:00
Creation Date	2018-02-26 21:12:44
Producing Software	Mac OS X 10.13.3 Quartz PDFContext
Document Lastmod	2018-02-28 19:32:15
Document Title	iPad User Guide
Document Creator	Safari
Document Author:	fsegal

Take a Live Photo. (on supported models) A Live Photo captures what happens just
before and after you take your photo, along with the audio. Choose Photo, tap
to turn
on Live Photos (yellow is on), then tap the Shutter button. Live photos are marked with
“Live” in the corner. You can edit Live Photos and add filters to them in the Photos app.
Live Photos works with the rear camera and the FaceTime camera.
Take Burst shots. (on supported models) With the camera in Photo or Square mode,
touch and hold the Shutter button to take rapid-fire photos in bursts. Lift your finger to
stop. The counter shows how many shots youʼve taken. To see the suggested shots and
select the photos you want to keep, tap the burst thumbnail, then tap Select. The gray
dots below the thumbnails mark the suggested photos. To copy a photo from the burst as
a separate photo in Photos, tap the circle in the lower-right corner of the photo. To delete
the burst of photos, tap the bursts thumbnail, then tap
. To choose which burst photos
to upload to your Photo Stream, go to Settings > Photos.
Take a selfie with Retina Flash. (on supported models) Use the Retina HD display as a
flash for your selfies. Turn on the flash, switch to the FaceTime camera, then tap the
Shutter button (the display flashes on exposure).
Take a panorama photo. (rear camera) Choose Pano, tap the Shutter button, then pan
slowly in the direction of the arrow. To finish the pan, tap the button again. To pan in the
other direction, first tap the arrow. To pan vertically, rotate iPad to landscape orientation.
You can reverse the direction of a vertical pan, too.
Use the capture timer. Use the capture timer to give yourself time to be in the shot. First
set up iPad where you want, then frame your shot. Tap
Shutter button.
, tap 3s or 10s, then tap the
Preserve camera settings. You can preserve the last camera mode setting you used so
itʼs not reset when you next open Camera. Go to Settings > Camera > Preserve Settings,
then turn on Camera Mode. You can also preserve Live Photos settings on supported
models.
Read a QR code. Camera automatically detects a QR code when itʼs in the picture frame.
Tap the notification that appears to go to the relevant website or app.
Take a screenshot. To capture whatʼs displayed on your screen, simultaneously press
and then release the Home button and the Sleep/Wake button. Tap the screenshot, tap
Done, then choose Save to Photos or Delete Screenshot. If you save the screenshot, you
can view it in the Screenshots album or in the All Photos album if youʼre using iCloud
Photo Library.
Adjust shutter-sound volume. Adjust the volume of the shutter sound using the Ringer
and Alerts settings in Settings > Sounds. Or mute the sound using the volume down
button or the Ring/Silent switch, if your iPad has one. (In some countries muting is
disabled.)
Adjust for the perfect shot
About auto exposure and face detection. When youʼre taking a picture, a rectangle
may briefly appear to indicate where the automatic exposure is set. When you
photograph people, face detection balances the exposure across many faces. A
rectangle appears for each face detected.
Lock the focus and exposure. Exposure is automatic, but you can set the exposure
manually for the next shot by tapping an object or area on the screen. To lock the
exposure and focus, touch and hold until the rectangle pulses. The screen indicates
when exposure and focus are locked. Take as many photos as you want. When you tap
the screen again, exposure and focus unlock, and the automatic settings and face
detection turn back on.
Note: Tapping the screen sets the focus and the exposure, and face detection is
temporarily turned off.
Adjust the exposure. Tap to see
next to the exposure rectangle, then slide up or
down to adjust the exposure.
Turn the flash on or off. Tap
. The flash on the back of your device also provides extra
light when you need it. To use the flash as a flashlight, open Control Center, then tap the
Flashlight button.
Make it better. You can edit photos and trim videos, right on iPad. See Edit photos and
trim videos.
Shoot video
With Camera you can shoot video, including slow-motion and time-lapse videos.
Record a video. Choose Video, then tap the Record button or press either volume button
to start and stop recording.
Change the frame rate and video resolution settings. Go to Settings > Camera >
Record Video. By default, video records at 30 fps (frames per second). Depending on
your model, you can choose other frame rates and video resolution settings. The faster
the frame rate and the higher the resolution, the larger the resulting video file.
Snap a still while recording. Tap the white Shutter button.
Take it slow. (rear camera) Choose Slo-mo to capture slow-motion video (on supported
models). When you edit the video you can set just a portion of it to play back in slow
motion, and the rest plays back at regular speed. To change the Slo-mo settings, go to
Settings > Camera > Record Slo-mo.
Set the slow-motion section of a video. Tap the video thumbnail, then tap Edit. Slide
the vertical bars beneath the frame viewer to define the section you want to play back in
slow motion. Tap Done.
Zoom in or out when shooting video. (rear camera) Pinch the image on the screen open
to zoom in, and pinch closed to zoom out.
Capture an experience with time-lapse. Choose Time-Lapse, set up iPad where you
want, then tap the Record button to start capturing a sunset, traffic flowing, or other
experiences over a period of time. Tap the Record button again to stop. The time-lapse
photos are compiled into a short video.
With iOS 9 and later, time-lapse videos have video stabilization, which minimizes the
effect of camera movement during capture.
HDR
HDR (High Dynamic Range) helps you get great shots in high-contrast situations. iPad
takes three photos in rapid succession at different exposures—then blends them
together. The resulting photo has better detail in the bright and midtone areas.
Use HDR. (On supported models) Tap HDR. For best results, keep iPad steady and avoid
subject motion.
On some models, you can choose HDR Auto so iPad uses HDR when itʼs most effective.
Keep only the HDR version. Go to Settings > Camera, then turn off Keep Normal Photo
(by default, both the normal and HDR versions of the photo appear in Photos). In your
albums, HDR versions of photos are marked with “HDR” in the corner.
Note: By default, both the normal and HDR versions of the photo appear in Photos.
View, share, and print
Photos and videos you take on iPad are saved in Photos. With iCloud Photo Library
turned on, all new photos and videos are automatically uploaded and available in Photos
on all your devices with iOS 8.1 or later that are set up with iCloud Photo Library. When
iCloud Photo Library is turned off, you can still collect up to 1000 of your most recent
photos in the My Photo Stream album from your devices set up with iCloud.
Note: If Location Services is turned on, photos and videos are tagged with location data
that can be used by apps and photo-sharing websites. See Location Services.
View your photos. In Camera, tap the thumbnail image that appears below the Shutter
button, then swipe left or right to see the photos youʼve taken recently. Tap All Photos to
see everything in the Photos app.
Tap the screen to show or hide the controls.
View sharing and printing options. While viewing an image, tap
. See Share from
apps.
Upload photos and videos. Use iCloud Photo Library to upload photos and videos from
your iPad to iCloud. You can access them on your devices with iOS 8.1 or later where
youʼre signed in to iCloud using the same Apple ID. You can also upload and download
your photos and videos from the Photos app on iCloud.com.
Sync photos and videos to iPad from your Mac. Use the Photos settings pane in
iTunes. See Sync iPad.
Contacts
Manage contacts
With Contacts, you can view and edit your contacts lists from personal, business, and
other accounts. You can also create contacts and set up a contact card with your own
information.
Create a new contact. Tap
iPad automatically suggests new contacts from messages you receive in Mail and
invitations in Calendar, and from other apps. To turn this feature off, go to Settings >
Contacts > Siri & Search, then turn off Find Contacts in Other Apps.
Allow incoming texts or calls from a specific contact even if Do Not Disturb is on. Tap the
contact, tap Edit, tap Ringtone or Text Tone, then turn on Emergency Bypass.
Ask Siri. Say something like:
“Whatʼs my brotherʼs work address?”
“Sarah Castelblanco is my sister”
“Send a message to my sister”
Allow calls or texts from a contact to override Do Not Disturb. Tap the contact, tap
Edit, tap Ringtone or Text Tone, then turn on Emergency Bypass.
Find a contact. Tap the search field at the top of the contacts list, then enter your
search. You can also search your contacts using Search (see Search).
Quickly reach a contact. Tap one of the buttons below the contactʼs name to start a
message, call, video call, or email. To change the default contact method (for a call, for
example), touch and hold the call button, then tap a phone number.
If you use a third-party app to make video or audio calls, send messages, or send email,
you may be able to set that app as the default.
Change how your contacts are sorted and displayed. Go to Settings > Contacts.
Share a contact. Tap a contact, then tap Share Contact. See Share from apps. Sharing a
contact shares all the info from the contactʼs card.
Assign a photo to a contact. Tap a contact, tap Edit, then tap “add photo.” You can take
a photo or add one from the Photos app.
Change a label. If a field has the wrong label, such as Home instead of Work, tap Edit.
Then tap the label and choose one from the list, or tap Custom Field to create one of your
own.
Add your friendsʼ social profiles. While viewing a contact, tap Edit, then tap “add social
profile.”
Delete a contact. Go to the contactʼs card, then tap Edit. Scroll down, then tap Delete
Contact.
Add your contact info
iPad uses your Apple ID to create your My Card, but you may need to provide your
contact information to complete it.
Complete your My Card. Open Contacts, tap My Card at the top of your contacts list,
then tap Edit. Contacts suggests addresses and phone numbers to help you set up your
My Card.
If there is no My Card, tap
, then enter your information. To create a My Card with this
information, go to Settings > Contacts, tap My Info, then tap your name in the Contacts
list.
Edit your My Card. In Contacts, tap My Card at the top of your contacts list, then tap
Edit.
Add contact accounts
Besides adding contacts individually, you can:
Use your iCloud contacts: Go to Settings > [your name] > iCloud, then turn on
Contacts.
Use your Google contacts: Go to Settings > Accounts & Passwords. Tap Google, sign
in to your account, then turn on Contacts.
Add contacts from another account: Go to Settings > Accounts & Passwords > Add
Account. Choose an account, sign in to it, then turn on Contacts
Access a Microsoft Exchange Global Address List: Go to Settings > Accounts &
Passwords. Tap Exchange, sign in to your Exchange account, then turn on Contacts.
Set up an LDAP or CardDAV account to access business or school directories: Go to
Settings > Accounts & Passwords > Add Account > Other. Tap Add LDAP Account or
Add CardDAV Account, then enter the account information.
Sync contacts from your computer: In iTunes on your computer, tap Info in the device
info pane, then select Sync Contacts. For information, see iTunes Help.
Import contacts from a vCard: Tap a .vcf attachment in an email or message.
Search a directory. Tap Groups, then tap the GAL, CardDAV, or LDAP directory you want
to search. Tap Done, then enter your search. To save a personʼs info to your contacts, tap
the personʼs name.
Show or hide a group. Tap Groups, then select the groups you want to see. This button
appears only if you have more than one source of contacts.
Hide duplicate contacts
When you have contacts from multiple sources, you might have multiple entries for the
same person. To keep redundant contacts from appearing in your All Contacts list,
contacts from different sources with the same name are linked and displayed as a single
unified contact. When you view a unified contact, the title Unified Info appears.
Link contacts. If two entries for the same person arenʼt linked automatically, you can
unify them manually. Tap one of the contacts, tap Edit, tap Link Contacts, choose the
other contact entry to link to, then tap Link.
When you link contacts with different first or last names, the names on the individual
cards donʼt change, but only one name appears on the unified card. To choose which
name appears on the unified card, tap one of the linked cards, tap the contactʼs name on
that card, then tap Use This Name For Unified Card.
Note: When you link contacts, those contacts arenʼt merged. If you change or add
information in a unified contact, the changes are copied to each source account where
that information already exists.
Clock
See the time in cities around the world
Use the Clock app to view the time in various locations around the world.
Ask Siri. Say something like:
“What time is it?”
“What time is it in London?”
Manage your World Clock list. In the World Clock tab, tap Edit.
Add a city: Tap
Delete a city: Tap
, then choose a city.
Reorder the cities: Touch and hold a clock, then drag it to a new position.
Set an alarm or bedtime schedule
With the Clock app, you can set an alarm that plays a sound at a specific time. You can
also set a bedtime schedule that reminds you when to go to sleep and plays a sound
when itʼs time to wake up.
Ask Siri. Say something like:
“Wake me up tomorrow at 7 a.m.”
“Set an alarm for 9 a.m. every Friday”
“Turn off all my alarms”
Set an alarm. Tap Alarm, then tap
. Set the time and other options. To give the alarm a
name (like “Water the plants”) tap the label option.
Change an alarm. Tap Edit, then tap the alarm.
Delete an alarm. Swipe left on the alarm, then tap Delete.
Set a bedtime schedule. Tap Bedtime, then follow the instructions to set your sleep
reminder and wake-up alarm. After youʼve done the initial setup, you can slide
and
to adjust your sleep and wake times. Tap Options to set the alarm days, wake-up sound,
and volume. To turn Bedtime reminders off, tap the Bedtime switch.
Fall asleep to music or a podcast. Tap Timer and set a duration of time. Then tap
and
choose Stop Playing at the bottom.
Track time with the timer or stopwatch
In the Clock app, you can count down from a specified time with the timer or measure the
duration of an event with the stopwatch.
Ask Siri. Say something like:
“Set the timer for 3 minutes”
“Stop the timer”
Set the timer. Tap Timer, then set the duration of time and a sound to play when the
timer ends.
Tip: To quickly access the timer, open Control Center, then tap
. You can access
Timer from Control Center even when iPad is locked.
Measure the duration of an event and track lap times. Tap Stopwatch, then tap Start.
Tap Lap to record a lap or split. The timing continues even if you return to the Home
screen, open other apps, or press the Sleep/Wake button. Tap Stop to record the final
time. When you finish, tap Reset to clear the stopwatch.
Switch between digital and analog stopwatch faces. Swipe the stopwatch.
Maps
Find places
Use the Maps app to get directions, find and explore new places, and more.
Move around Maps by dragging the screen. To face a different direction, rotate with two
fingers. To return to north, tap the compass
Ask Siri. Say something like:
“Find coffee near me”
“Show me the Golden Gate Bridge”
WARNING: For important information about navigation and avoiding distractions that
could lead to dangerous situations, see Important safety information.
Zoom in or out. Either pinch open or closed on the map, or double-tap and hold the map,
then drag up to zoom in or down to zoom out. The scale appears at the top of the screen
while youʼre zooming. To change how distance is shown (in miles or kilometers), go to
Settings > Maps.
Find nearby attractions, services, and more. Tap the search field, tap a category such
as Food or Shopping, then tap a result. (For availability, see the iOS Feature Availability
website.)
Search for a location. Tap the search field. You can search for a location in different
ways. For example:
Intersection (“8th and Market”)
Area (“Greenwich Village”)
Landmark (“Guggenheim”)
Zip code
Business (“movies,” “restaurants San Francisco CA,” “Apple Inc New York”)
Maps may also list recent locations, searches, or directions that you can choose from.
Change the search area. Zoom in or out, or drag the screen to another area, then tap
Search Here.
Get info about a location. Tap a location, then swipe up to view all of the information
about it, or tap
to close the info display.
Use indoor maps to find your way around an airport or shopping mall. Go to the
location, then tap Look Inside. Tap a category (like Food, Restrooms, or Clothes) on the
left, then tap a result. Swipe up to see all results, listed alphabetically. To see a map of a
different floor, tap the Floor Level button below
. Zoom in if you donʼt see the Floor
Level button.
Add a favorite location. Tap a location, then tap
Book a table and more. If youʼve installed apps that have map extensions, you may be
able to do things like make a reservation at a restaurant. Visit the App Store to find apps
that work with Maps.
Choose your view. Tap
, then choose Map, Transit, or Satellite.
If transit information is unavailable, tap View Routing Apps to use an app for public or
other modes of transportation.
Mark a location. Touch and hold the map until a marker appears.
Share a location
Tap a marker to display its info, then tap
and choose an option such as Mail or AirDrop.
See Share from apps.
Get traffic and other info
Find out about traffic conditions. From Map or Satellite view, tap
, then turn on
Traffic. Orange shows slowdowns, and red shows stop-and-go traffic. To see an incident
report, tap an incident marker.
Get info about a location. Tap a location to display its information. Info might include
Yelp reviews, a phone number, a webpage link, and more.
Find out about the weather. Zoom in until the weather icon, which shows current
conditions for that area, appears in the lower-right corner.
Help improve Maps. To report an incorrect label, a missing location, or other issue, tap
, then tap Report an Issue.
Get directions
Note: To get directions, iPad must be connected to the Internet. To get directions
involving your current location, Location Services must also be on. (See also Location
Services.)
Ask Siri. Say something like:
“Give me directions home”
“Transit directions to my dadʼs work”
“Whatʼs my ETA?”
“Find a gas station”
Find a route to a location. Tap a location to display its info, then tap Directions.
Directions are from your current location. To get other directions, tap My Location, then
enter a different location.
Choose a different route: If multiple routes appear, tap the one you want to take.
See a driving, walking, or transit route: Tap Drive, Walk, or Transit.
See detailed directions: Tap Go.
In select cities, Maps provides public transportation information and multi-modal routing,
from walking to a bus stop or train station to hopping off at your destination.
If transit route information is unavailable, tap View Routing Apps to use an app for other
modes of transportation.
Mark a transit stop as a favorite. When viewing detailed route directions, tap a transit
stop or station, then tap
on the location card. To add the transit line to the Maps
Transit widget in Today View, where you can quickly check the lineʼs operating status, tap
Add Line when asked.
Choose a transit time or date. Find a transit route, tap Leaving Soon to select a time or
date for departure or arrival. Tap Transit Options to choose which transit vehicles to
consider.
Share a route. Find a route, tap Share, then choose an option like Mail or AirDrop. See
Share from apps.
Hear turn-by-turn driving directions (Wi-Fi + Cellular models). Find a drive route,
then tap Go.
Maps follows your progress and speaks turn-by-turn directions to your destination. If
iPad auto-locks, Maps stays onscreen and continues to announce directions.
See the route overview: Tap the turn directions at the top of the screen. To change
the map orientation so that the destination, instead of north, shows at the top, tap the
map, then tap the compass in the top-right corner of the screen. To return to turn-byturn directions, tap the turn direction in the top-left corner of the screen.
View directions as a list: Tap the route card at the bottom of the screen, then tap
Details.
Even if you open another app, Maps continues to give you turn-by-turn directions. To
return to Maps, tap the banner across the top of the screen.
View turn-by-turn or stop-by-stop directions. Find a walk, transit, or (on Wi-Fi-only
models) drive route, tap Go, then swipe each instruction left.
See the route overview: Tap the route card at the bottom of the screen, then tap
Overview. To zoom in, tap the route card, then tap Turn-by-turn (for drive and walk
directions) or Zoom In (for transit directions).
View directions as a list: Tap the route card at the bottom of the screen, then tap
Details.
Stop turn-by-turn directions. Tap End.
Ask Siri. Say something like: “Stop navigating.”
Make a quick detour. To add a stop along your route, tap the route card, then tap one of
the suggested services, such as gas stations. Tap Go to add one to your route.
Use Maps on your Mac to get directions. Open Maps on your Mac (OS X 10.9 or later),
get directions for your trip, then choose File > Share > Send to [your device]. Your Mac
and iPad must both be set up with iCloud to use the same Apple ID.
You can also use Handoff to send directions from iPad to Mac. See Handoff.
Remove markers and routes
Remove a marker. Tap the marker, tap Edit Location, then tap Remove Marker.
Delete a route. Past routes are listed below the Search field. To remove one, swipe it to
the left.
3D and Flyover
With 3D and Flyover, you can see three-dimensional views of, and even fly over, many of
the worldʼs major cities.
View a 3D map. Drag two fingers up. (Zoom in for a closer look if the 3D map doesnʼt
appear.) For best effect, use the satellite view. Tap
Adjust the angle. Drag two fingers up or down.
, then tap Satellite.
See cities and landmarks from above with Flyover. Flyover is available for select cities
and landmarks. Tap the name of a city (in Map or Satellite view) or tap the name of a
landmark, then tap Flyover in the banner (Flyover Tour on iPad mini). To return to the
map, tap
On supported models, view a city or landmark from above:
Change viewing direction: Point or tilt iPad in the direction you want to view.
Move around: Drag a finger in any direction. To rotate perspective, touch and hold the
screen with one finger, then continue holding it in place while you drag another finger
around it.
Watch an aerial 3D tour: Tap Start Tour or Start City Tour in the card at the bottom of
the screen. (If you donʼt see the card, tap anywhere on the screen.)
Flyover cities are indicated by
next to their names in Map view. If you donʼt see
markers, zoom out, or if youʼre using Transit or Satellite view, tap
, then choose Map.
Flyover locations are identified by the Flyover button in their banners.
Home
Home overview
Home provides a secure way to control and automate HomeKit-enabled accessories,
such as lights, locks, thermostats, window shades, smart plugs, cameras, and more. With
Home, you can control any “Works with Apple HomeKit” accessory using iPad.
After you set up your home and its rooms, you can control accessories individually, or use
scenes to control multiple accessories with one command. For example, you might create
a scene called “going to bed” that turns off the lights around the house, dims the lights in
the room “master bedroom” to 30 percent, then locks the front door and lowers the
thermostat.
If you have an Apple TV (4th generation or later), HomePod, or iPad (with iOS 10.3 or
later) that you leave at home, you can schedule scenes to run automatically at certain
times, or when you activate a particular accessory (for example, when you unlock the
front door). This also allows you, and others you invite, to securely control your home
while youʼre away.
Add and control accessories
The first time you open the Home app, the setup assistant helps you create a home,
where you can add accessories and define rooms. If you already created a home using
another HomeKit-enabled app, youʼll skip this step.
Add an accessory to your home. To add an accessory to Home, make sure the
accessory is turned on, tap
, tap Add Accessory, then follow the onscreen instructions.
You may need to scan or enter an 8-digit HomeKit setup code found on the accessory
itself (or its box or documentation). You can assign the accessory to a room, as well as
give it a name. The name defines how itʼs shown in the Home app, and also how you
control it using Siri.
Control an accessory. Tap an accessoryʼs button to quickly turn it on or off, or touch and
hold the button until controls appear. The available controls depend on the type of
accessory it is. For example, with some lightbulbs, you can change colors. You can also
control accessories using Control Center.
Change HomePod settings with the Home app.
Touch and hold the HomePod button, then tap Alarms to see the alarms youʼve
created.
Touch and hold the HomePod button, tap Details, then configure the HomePod
settings—for example, assign HomePod to a different room, rename HomePod, or
turn on accessibility features.
Assign an accessory to a room. Tap Rooms, tap
, then choose the room the
accessory is currently assigned to. (If itʼs not already assigned, look in Default Room.)
Touch and hold the accessoryʼs button until its controls appear, then tap Details. Tap
Location to assign it to a room.
Rename or edit an accessory. Touch and hold the accessoryʼs button until its controls
appear, then tap Details.
Edit a room. Tap
, tap Room Settings, then choose the room to edit. You can change
the roomʼs name, wallpaper, or delete the room.
Make an accessory a favorite. Touch and hold an accessoryʼs button until its controls
appear, then tap Details. Then turn on “Included in Favorites.” You can access your
favorite accessories from the Home tab.
Change an accessoryʼs icon. Touch and hold an accessoryʼs button until its controls
appear, then tap Details. Tap the icon (next to its name) to select a new icon. Not all icons
can be changed, but you can change them for lighting accessories, for example.
Rearrange your favorites. Tap Edit, then drag the buttons into the arrangement you
want.
Add more homes. Tap
, then tap Add Home. After you add another home, tap
choose the one you want to view or control.
to
Create and use scenes
Scenes allow you to control multiple accessories at once. For example, you might define
a “Reading” scene that adjusts the lights, closes the drapes, and adjusts the thermostat.
Home has some typical scenes already defined for you, but youʼll need to edit them
before theyʼll work.
Create a scene. Tap
, enter a name for the scene (such as “Dinner Party” or
“Watching TV”), then tap Add Accessories. Select the accessories you want this scene to
control, then tap Done. Next, set each accessory to change it to the state you want it to
be when the scene is run. For example, you can set up a scene that turns on lights in the
bedroom, and turns off the kitchen lights, when youʼre going to bed.
Run a scene. Tap a scene to run it. If you donʼt see the scene you want to run, look in a
different room.
Change a scene. Touch and hold a scene, then tap Details.
Make a scene a favorite. Touch and hold a scene, tap Details, then tap Show in
Favorites. Favorite scenes appear on the Home tab and are handy for scenes that arenʼt
automated.
Control your home using Siri
You can use Siri to control your accessories and scenes. Here are some of the things you
might be able to say to Siri, depending on your accessories, how youʼve named them, and
the scenes youʼve created:
“Turn off the lights” or “Turn on the lights”
“Dim the lights” or “Set brightness to 55%”
“Is the hallway light on?”
“Set the temperature to 68 degrees”
“Did I lock the front door?”
“Close the garage door”
“Show me the entryway camera”
“What is the air quality indoors?”
If you set up rooms, scenes, or more than one home, you can say things like:
“Iʼm home” or “Iʼm leaving”
“Turn down the kitchen lights”
“Turn on the fan in the office”
“Set my reading scene”
“Turn off the lights in the Chicago house”
Automations and remote access
If you have an Apple TV (4th generation or later) or HomePod, or if you set up an iPad
(with iOS 10.3 or later) that you leave at home, you can use automations and remote
access. Automations can run scenes automatically based on the time of day, your
location, a sensor being activated, or the action of an accessory. The Apple TV,
HomePod, or iPad acts as a home hub, which also allows remote access to your
accessories. Apple TV 3rd generation can also provide remote access, but doesʼt support
creating or editing automations using the Home app.
Use iPad for automations and remote access. Go to Settings > Home, then turn on
“Use this iPad as a Home Hub.” When iPad is in your home, it will run your Home
automations even when your iPhone or iPod touch is not present.
If you have an Apple TV and youʼre signed in using the same Apple ID as your iPad, it will
be paired automatically and enabled for automation.
Create an automation. Tap the Automation tab, tap Create New Automation, then
choose one of the automation triggers described below.
When arriving or leaving a location. Tap People Arrive or People Leave, then set a
geofence and specify if you want the trigger to occur when you arrive or leave the
location. You can also set this automation to only occur after sunset, which is useful for
turning on lights only when theyʼre needed.
At a time of day. Tap A Time of Day Occurs, then choose when you want this automation
to run. If you choose Sunset or Sunrise, the time will vary as the season changes.
When an accessory changes. Tap An Accessory is Controlled, select an accessory, then
tap Next and follow the onscreen instructions. You might use this, for example, to run a
scene when you unlock the front door.
A sensor detects something. Tap A Sensor Detects Something, select an accessory,
then tap Next and follow the onscreen instructions. You might use this, for example, to
turn on lights in a stairway when motion is detected nearby.
Disable an automation. In the Automations tab, tap the automation, then turn off Enable
This Automation.
Share control with others
You can invite others to control the accessories in your home. The people you invite need
to have iCloud set up. If you have an Apple TV (4th generation or later) or HomePod, or if
you configured an iPad (with iOS 10.3 or later) to be used as a home hub, additional
controls are available that let you set what guests are able to do.
Give others control. Tap
, tap Home Settings, tap a home, tap Invite, then choose
people from your contacts list or enter their email addresses.
TV
Discover movies, shows, sports, and news
Use the Apple TV App to discover and watch movies, TV shows, live sports, and news
from your supported apps in one place. You can continue watching content you
purchased or rented from the iTunes Store, or you can go to the next episode in a TV
series, even if you started playing on another iOS device or on Apple TV. (The Apple TV
App isnʼt available in all regions.)
WARNING: For important information about avoiding hearing loss, see Important safety
information.
Use single sign-on to authenticate your cable or satellite subscription credentials.
Sign in when you first open the Apple TV App, or go to Settings > TV Provider. Single
sign-on provides immediate access to all the supported video apps in your subscription
package. (If you donʼt see your TV provider, sign in directly from the app you want to
use.)
Discover content. Tap Watch Now, then browse through the available content.
Explore movies and TV shows: Browse What to Watch. Tap a title to see the details
screen, which may include trailers, reviews, cast information, and more.
Watch live news: (not available in all regions) Scroll down to the News section, then
choose a news channel.
Browse by category: Scroll down, then tap a category such as Kids.
Explore sports. (not available in all regions) Tap Watch Now, scroll down to the Sports
section, then browse the live and upcoming games. To explore more sports, tap the
Sports tab:
Browse by sport: Browse games for many sports, such as football, baseball, and
basketball. To narrow your browsing, scroll down, then choose a sport.
Choose your favorite teams: Scroll to the bottom, then tap Pick Your Favorite Teams.
Their games automatically appear in Up Next, and youʼll receive notifications.
Hide the scores of live games: Go to Settings > TV, then turn off Show Sports Scores.
Search for specific content. Tap Search, then enter a title, sport, team, cast, or crew
member in the search field.
Play content. Tap a title to see the details screen, where you can:
Watch with the suggested video app: Tap
Buy or rent from the iTunes Store: (not available for all titles) Tap Buy or Rent. Or tap
, then tap Open in iTunes. For more information, see Purchase, rent, or redeem.
Choose a different video app: If the content is available from multiple providers, tap
to choose a provider.
See whatʼs up next. Tap Watch Now, then browse the Up Next section to find:
The next episode in a TV series youʼve been watching
Live sports events, displayed with up-to-the-minute scores
Content you havenʼt finished, even if you started watching on another device where
youʼre signed in to the iTunes Store with the same Apple ID
Content youʼve recently purchased or rented from the iTunes Store
Queue content to play next. Tap the item, tap
, then tap Add to Up Next.
Remove content from Up Next. Touch and hold the item, then tap Remove from Up
Next.
Watch Homeland on Showtime®. Homeland © Twentieth Century Fox Film Corporation. All rights reserved.
SHOWTIME and related marks are registered trademarks of Showtime Networks Inc., a CBS company.
SHOWTIME is accessible for viewing solely in the United States and its territories and possessions. Minimum
high-speed broadband connection is required for viewing. Watch Big Little Lies on HBO NOW with
subscription. HBO NOW® is accessible in the U.S. and certain U.S. territories. Certain restrictions apply. ©
2017 Home Box Office, Inc. All rights reserved. HBO NOW® and related channels and service marks are the
property of Home Box Office, Inc.
Manage your library
Your library includes movies and shows you purchased or rented from the iTunes Store.
Add new movies and shows to your library. Tap Store, where you can find the latest
releases on the iTunes Store.
Browse content in your library. Tap Library. To narrow your browsing, tap Library at the
top left, tap a category—such as TV Shows or Movies, then tap Sort by Genre.
Play a movie or show. Tap a title to see the details screen, where you can:
Stream the content if iPad is connected to the Internet: Tap
Download the content so you can watch it later when iPad isnʼt connected to the
Internet: Tap
Remove a download. In the Library tab, tap Library at the top left, then tap Downloaded,
then navigate to the title you want to remove. Tap DOWNLOADED, then tap Remove
Download.
Control playback
This information describes playback for content purchased or rented from the
iTunes Store. Playback using third-party apps may vary.
Wonder Woman is available on iTunes.
Play a movie or show. Tap
Pause. Tap
Skip forward or go back. Touch and hold
or
, or drag the playhead forward or
back. To control the scrubbing speed, move your finger vertically as you drag the
playhead.
Skip to the next or previous chapter. Tap
or
. You can also press the center
button or equivalent on a compatible headset two times (skip to next) or three times (skip
to previous).
Scale the video to fill the screen or fit to the screen. Tap
or
, or double-tap the
video. If you donʼt see the scaling controls, your video already fits the screen perfectly.
Multitask with Picture in Picture. (on supported models) When watching a video, press
the Home button or tap
. Your video screen scales down to a corner of your display so
you can see the Home screen and open other apps. To return to the video, tap
in the
small video window. For more information, see Picture in Picture.
Choose a different audio language. (not available for all videos) Tap
, then choose a
language from the Audio list.
Show subtitles or closed captions. (not available for all videos) Tap
See subtitles and closed captions for the deaf and hard of hearing. Go to Settings >
General > Accessibility > Subtitles & Captioning, then turn on Closed Captions + SDH. To
customize the appearance of subtitles and closed captions, tap Style.
Choose playback quality. Go to Settings > TV > iTunes Videos.
On Wi-Fi models: Tap Playback Quality, then choose Best Available or Good.
On Wi-Fi + Cellular models: Below Playback Quality, tap Wi-Fi or Cellular, then choose
Best Available or Good.
Note: High-quality playback requires a faster Internet connection and uses more data.
Stop playing a video automatically. If you often fall asleep while watching a video, you
can have the video stop playing after a set amount of time. Open the Clock app and tap
Timer, then set the number of hours and minutes. Tap the alert tone, choose Stop
Playing, tap Set, then tap Start.
Watch on your Apple TV.
Open the Apple TV App on Apple TV: The Watch Now section includes the shows and
movies youʼve been watching. You must be signed in with the same Apple ID on iPad
and Apple TV.
AirPlay to Apple TV: Start playing the video on iPad, then tap
. For more
information, see Stream audio and video to other devices.
Wonder Woman TM and © DC Comics and © 2017 WBEI and RatPac-Dune Entertainment LLC. All rights
reserved.
Videos
Watch videos
Use Videos to watch movies and TV shows on iPad. In Videos, you can also purchase
movies and TV shows from the iTunes Store that can be played on your other devices
where youʼre signed in to iCloud with the same Apple ID.
Videos has been replaced by the Apple TV App in some regions.
WARNING: For important information about avoiding hearing loss, see Important safety
information.
Watch a movie or TV show. Tap the video in the list of videos.
Stream or download? If
appears on a video thumbnail, you can stream the video
over your Internet connection. Or, to download the video to iPad and watch it when youʼre
offline, tap
in the video details.
To show only the videos that are downloaded to iPad, go to Settings > Videos, then turn
off Show iTunes Purchases.
Watch other types of videos.
Music videos: Open the Music app.
Podcasts: Open the Podcasts app.
Videos you recorded with your iPad camera: Open the Photos app.
Add videos to your library
Buy or rent videos from the iTunes Store. Tap Store in the Videos app. Or open the
iTunes Store on iPad, then tap Movies or TV Shows. The iTunes Store isnʼt available in all
regions. See Find music, movies, TV shows, and more.
Transfer videos from your computer. Connect iPad, then sync videos from iTunes on
your computer. See the Apple Support article Sync your iPhone, iPad, or iPod touch with
iTunes using USB.
Stream videos from your computer. To configure video streaming from your computer
to iPad, turn on Home Sharing in iTunes on your computer. On iPad, go to Settings >
Videos, then enter the Apple ID and password you use for Home Sharing on your
computer. Open Videos on iPad, then tap Shared.
Convert a video for iPad. If you try to sync a video from iTunes on your computer to iPad
and a message says the video canʼt play on iPad, you can convert the video. Select the
video in iTunes on your computer, then choose File > Convert > Create iPad or Apple TV
Version. Then sync the converted video to iPad.
Delete a video. Tap Edit in the upper right of your collection, then tap
thumbnail. If you donʼt see the Edit button, look for
on the video
on your video thumbnails—those
videos havenʼt been downloaded to iPad, so you canʼt delete them. To delete an
individual episode of a series, tap the series, then swipe left on the episode in the
Episodes list.
Deleting a video from iPad doesnʼt delete it from the iTunes library on your computer or
from your purchased videos in iCloud. You can sync the video or download it to iPad
again later. If you donʼt want to sync a deleted video back to iPad, set iTunes to not sync
the video.
Control playback
Wonder Woman is available on iTunes.
Play a video. Tap
Pause. Tap
Skip forward or go back. Touch and hold
or
, or drag the playhead forward or
back. To control the scrubbing speed, move your finger vertically as you drag the
playhead.
Skip to the next or previous chapter. Tap
or
. You can also press the center
button or equivalent on a compatible headset two times (skip to next) or three times (skip
to previous).
Scale the video to fill the screen or fit to the screen. Tap
or
, or double-tap the
video. If you donʼt see the scaling controls, your video already fits the screen perfectly.
Multitask with Picture in Picture. (on supported models) When watching a video, press
the Home button or tap
. Your video screen scales down to a corner of your display so
you can see the Home screen and open other apps. To return to the video, tap
in the
small video window. For more information, see Picture in Picture.
Choose a different audio language. (not available for all videos) Tap
, then choose a
language from the Audio list.
Show subtitles or closed captions. (not available for all videos) Tap
See subtitles and closed captions for the deaf and hard of hearing. Go to Settings >
General > Accessibility > Subtitles & Captioning, then turn on Closed Captions + SDH. To
customize the appearance of subtitles and closed captions, tap Style and choose an
option.
Choose playback quality. Go to Settings > Videos.
On Wi-Fi models: Tap Playback Quality, then choose Best Available or Good.
On Wi-Fi + Cellular models: Below Playback Quality, tap Wi-Fi or Cellular, then choose
Best Available or Good.
Note: High-quality playback requires a faster Internet connection and uses more data.
Choose where to resume playback. Go to Settings > Videos, tap Start Playing, then
choose From Beginning or Where Left Off.
Stop playing a video automatically. If you often fall asleep while watching a video, you
can have the video stop playing after a set amount of time. Open the Clock app and tap
Timer, then set the number of hours and minutes. Tap When Timer Ends and choose Stop
Playing, tap Set, then tap Start.
Stream to Apple TV with AirPlay. Start playing the video on iPad, then tap
. For more
information, see Stream audio and video to other devices.
Wonder Woman TM and © DC Comics and © 2017 WBEI and RatPac-Dune Entertainment LLC. All rights
reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Apple Keywords                  : 
Author                          : fsegal
Create Date                     : 2018:02:26 21:12:44Z
Modify Date                     : 2018:02:28 19:32:15-08:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : fsegal
Description                     : 
Title                           : iPad User Guide
Creator Tool                    : Safari
Metadata Date                   : 2018:02:28 19:32:15-08:00
Keywords                        : 
Producer                        : Mac OS X 10.13.3 Quartz PDFContext
Document ID                     : uuid:34facb54-d924-8546-b867-c200ead2ef6a
Instance ID                     : uuid:a00fc19f-923b-d54f-a651-8be2ac99d30d
Page Count                      : 30

EXIF Metadata provided by EXIF.tools