Asia Pacific Satellite communications SO-2510 Thuraya Satellite Mobile Phone User Manual SO 2510Eng co indd

Asia Pacific Satellite communications Inc. Thuraya Satellite Mobile Phone SO 2510Eng co indd

Contents

User Manual Part3

6003Using the menu6103Using the menu0204Using the menu 01Setting of Select areaTo enter local time using GPS, it is set up to show current time automatically from GMT time from GPS together with time difference of local area. Wrong time could be displayed for areas of different capital cities even if they are located in the same geographical coordinates. To prevent this, the area where SO-2510 is to be used is set up. SIM card Contacts copy to phone memory Copies contacts in the SIM card to phone memory. To change Currency 1. Select Charge by pressing . 2. Enter PIN2 code and press to conrm PIN2. 3. Select a currency instead of units and set the currency rate. (Use English for currency and numbers for currency rate)4. Press to save.7.7.2. Cost Limit Limits the cost of a call, and requires PIN2. ome SIM cards do not support this function.To set up Cost Limit 1. Execute Charge by pressing . 2. Enter PIN2 code and press to conrm PIN2. 3. Enter cost limit in a form of unit. If set as Currency, this will show the status that the currency is applied. (Use numbers only for Coast Limit)4. Press to save.7.7.3. Cost Displayed Displays the cost of a call in call summary when the call is nished. 7.7.3.1. On : Cost is displayed in call summary. 7.7.3.2. Off : Cost is not displayed in call summary.●●The backlight in the SO-2510 can be congured to be always on, off or on for 15 or 30 Seconds. The battery performance will be increased if the backlight is on for shorter time.7.10.1. Always offBacklight switched off always. 7.10.2. 15 SecondsBacklight is switched off 15 seconds after last key entry.7.10.3. 30 SecondsBacklight is switched off 30 seconds after last key entry.7.10.4. Always on Backlight is always on regardless of key entry.●●●●7.10 Backlight Denes action to be taken by user when there is an incoming call. 7.12.1. Auto Answer Answers automatically after set period of time. 7.12.1.1. 10 Seconds : Answers automatically after 10 seconds. 7.12.1.2. 30 Seconds : Answers automatically after 30 Seconds. 7.12.1.3. Off : Does not answer phone automatically. 7.12.2. Any key Answer phone by pressing any key. 7.12.2.1. On : Answer phone by pressing any key. 7.12.2.2. Off : Answer phone only by pressing key. ●●Backlight of LCD can be set up in 12 steps. (If setting Backlight is congured as Always Off, the entered values will not be applied.) 7.11. LCD Contrast (A function to adjust brightness of backlight)7.12. Answer Method
6203Using the menu6303Using the menu0204Using the menu 01When call is not connected (Busy, Low signal, No network), tries to reconnect automatically.7.13.1. On Activates Auto Redial.7.13.2. Off Deactivates Auto Redial.●●7.13. Auto Redial Current time and date can be directly entered or set up automatically using GPS.7.14.1. Set Time/Date To enter time directly. ●7.14. Time/DateEnter month/date/year using keypad. For January, enter 01. Any mistakes during entry can be corrected by moving cursor using to the mistake. On completion of entry, press to save. If Time Format is set as 12H, set the time as Am/Pm. (If Auto Update is set as OFF, you cannot set the value.)7.14.3. World Time World Time can be searched and conrmed. Time of other cities can be conrmed by using .1. If selecting a city with (select), the world time will change based on the selected city. (Default: Dubai.) ●NoteWorld time is calculated based on local time, and incorrect local time will result in incorrect World time. ●7.14.4. Time FormatThis displays the time on your mobile phone either in 24 hour or 12 hour format. 7.14.4.1. 24 Hours : Time is displayed in 24 hour format. 7.14.4.2. 12 Hours : Time is displayed in 12 hour format.●7.14.2. Auto Update To enter a local time by using GPS, the phone sets the current time automatically by entering UTC time and the time difference between UTC and the local time. In this case, the phone may show wrong time if the current location is same as other areas in terms of coordinates while the area has different capital cities. To prevent this kind of problem, it is necessary to set the local area where SO-2510 is used. 7.14.2.1. On : To automatically update the time 1. Select the Time Zone closer to the current location of the user. Alternatively, enter the name of the location to nd the Time Zone. 2. Press to operate update. Make sure you are at a place where SO-2510 can receive information from the GPS satellite. 3. Receive the UTC Time from GPS to update the selected time on the Time Zone. 7.14.2.2. Off : If Auto Update is set as OFF, you can set the value directly.●
6403Using the menu6503Using the menu0204Using the menu 018. Network In order to make calls or send SMS using SO-2510, it should be connected to SAT. This connection can be set up here.Connects the phone to a network. If set as Automatic, the phone will be connected to one of the networks in the Preferred List (SIM Card) according to the set priority.8.1.1. Automatic If set as Automatic, the phone will be connected to one of the networks in the Preferred List (SIM Card) according to the set priority.8.1.2. Manual If set as Manual, the phone will show a list of available networks by searching all the networks available. If the user selects a network, the phone will attempt to be connected to the network. If connected and the user makes calls or sends messages via a network different from the service provider of the SIM card, this will be considered as roaming and the phone fee may be more expensive than the usual fee.●●8.1. Network mode You may nd that you are no longer able to receive SAT calls if your SAT registration is out of date. This is indicated by the SAT icon blinking or if the displayed service area appears to be incorrect. In this case you have to update SAT registration manually to correct this mismatch.8.2. SAT Registration Displays the Preferred list registered in SIM card. It is a list of networks, and the number 1 cannot be changed, but from number 2 onwards, the user can change. When network mode is set on auto, connection is made with an available network in order of this list.8.3. Preference Congures the Entering of a PIN (Personal Identication Number) at start up. The PIN code can help protect the phone from miss use and protect personal data. It is made up of 4~8 digits, and entering wrong PIN code 3 times, bars access to SIM card, and PUK code must be entered to re-access SIM card.9.1.1. On Asks for the PIN code at start up. PIN code is necessary. .9.1.2. OffDoes not ask for the PIN code at start up. PIN code is necessary.●●9. Security This function organizes settings to prevent unwanted disclosure of your personal information and protects basic contents of your phone calls. 9.1. PIN code This code locks the functions of the phone apart from PIN code. When power is switched off and on again, security code is demanded and even if PIN code has been entered, use of phone will be restricted.9.2. Security code NoteFactory setting of Security code is "0000". ●9.2.1. On Activates security code and restricts the use of phone.9.2.2. Off Deactivates security code and the use of phone is not restricted. ●●
6603Using the menu6703Using the menu0204Using the menu 01This function can change all codes used with mobile phone. To change a code, existing code should be known.9.3.1. Change PIN PIN is a code stored in SIM card to protect user information. PIN can be changed only when PIN Code is ON.Change code : 1. Enter existing PIN code and press to conrm. 2. Enter new PIN code and press to conrm. 3. Enter new PIN code again and press to conrm. The PIN code has been updated.●9.3. Change codes 9.3.2. Change PIN2 PIN2 is a code to protect all settings and contents related to the network.Change code : 1. Enter existing PIN2 code and press to conrm. 2. Enter new PIN2 code and press to conrm. 3. Enter new PIN2 code again and press to conrm. The PIN2 code has been updated.9.3.3. Security code Security code is a code to protect user information stored in mobile phone.Change code : 1. Enter existing security code and press to conrm. 2. Enter new security code and press to conrm. 3. Enter new security code again and press to conrm. The security code has been updated.●●9.3.4. Barring code Barring code is a code used in call barring and stored with the network. Check with the network operator for the barring code.Change code : 1. Enter existing barring code and press to conrm. 2. Enter new barring code and press to conrm. 3. Enter new barring code again and press to conrm. The barring code has been updated.●Fixed Dialing is a function where only the registered numbers can be called. When xed dialing is set up, numbers other than those registered in xed dialing list and emergency number cannot be called. To use this function, PIN2 is required.9.4.1. Show List Shows the numbers registered in xed dial. If registered in contacts, name is displayed instead of number. ●9.4. Fixed Dialing
6803Using the menu6903Using the menu0204Using the menu 019.4.2. Add New Adds new registered number in xed dialing.To register in xed dialing 1. Enter PIN2 and conrm by pressing .2. Enter the name or phone number.3. Save by pressing . 9.4.3. On/Off It is used to activate/deactivate Fixed Dialing. 9.4.3.1. On : Activates Fixed Dialing. PIN2 must be entered. 9.4.3.2. Off : Deactivates Fixed Dialing. PIN2 must be entered.9.4.4. Fixed Dialing Status Shows the status of Fixed Dialing whether to be activated/deactivated.●●●Closed user group is a function to form a group and within the group lateral calls are restricted and only vertical calls are allowed. For CUG, a separately produced SIM card is supplied in agreement with service provider.9.5.1. OnActivates CUG. Own Index number should be known to activate CUG.9.5.2. Off Deactivates CUG. 9.5.3. Preset Users can set a default CUG based on the service provider and also select whether to use this default CUG in the phone. ●●●9.5. Closed User Group All mobile phones have a unique IMEI number. IMEI number can be checked here.9.6. IMEI Number Functions supported by Show List are as follows. 1. Shows registered numbers. Option > View2. Registered numbers can be edited. Option > Edit3. Calls registered number. Option > Call 4. Sends SMS to registered number. Option > Send SMS5. Input language (Up to 10 languages can be saved.) You can change Input languages.6. Deletes registered number. Option > Delete
7003Using the menu7103Using the menu0204Using the menu 019.7.5. Incoming Calls When AbroadThis function restricts incoming calls from external networks. 9.7.5.1. Activate : Activates incoming call restrictions from external networks. 9.7.5.2. Status : Checks setting from the network. 9.7.5.3. Deactivate: Deactivates incoming call restrictions from external networks.9.7.6. Clear Barring Clears call restriction functions. 9.7.6.1. All : Clears all restrictions. 9.7.6.2. Outgoing : Clears only restriction on outgoing calls. 9.7.6.3. Incoming Clears only restriction on incoming calls. ●●9.7.3. Int. Exc. to Home This function restricts international calls except to home. 9.7.3.1. Activate : Activates international call restriction except to home. 9.7.3.2. Status : Checks setting from the network. 9.7.3.3. Deactivate : Deactivates international call restriction except to home. 9.7.4. Incoming Calls This function restricts all incoming calls. 9.7.4.1. Activate : Activates all incoming call restrictions. 9.7.4.2. Status : Checks setting from the network. 9.7.4.3. Deactivate : Deactivates all incoming call restrictions. ●●It is a setting whether to use waiting when in a call.9.8.1. ActivateActivates call waiting when in a call. 9.8.2. Status Checks setting from Network. 9.8.3. Deactivate Deactivates waiting while on call. ●●●9.8. Call Waiting This function restricts calls, to outgoing and incoming calls. It is saved at the network, and to set up each call restriction, the barring code is required.9.7.1. Outgoing calls This function is used to restrict international outgoing calls. 9.7.1.1. Activate : Activates outgoing call restriction. 9.7.1.2. Status : Checks setting from the network. 9.7.1.3. Deactivate : Deactivates outgoing call restriction. 9.7.2. Int. Calls This function is used to restrict international outgoing calls. 9.7.2.1. Activate : Activates international outgoing call restriction. 9.7.2.2. Status : Checks setting from the network. 9.7.2.3. Deactivate Deactivates international outgoing call restriction. ●●9.7. Call Barring
7203Using the menu7303Using the menu0204Using the menu 01This function diverts incoming voice calls, data calls and fax calls to a specic number.9.9.1. Voice Sets divert of voice calls. 9.9.1.1. All Voice : This function diverts all voice calls to a specic number. 9.9.1.1.1.Activate : Activates diversion of incoming calls. 9.9.1.1.1.1 Voicemail : This function allows the user to set a voicemail number that has not already been set. 9.9.1.1.1.2 Number : This function is to enter the number that Incoming calls are to be diverted to. 9.9.1.1.2. Status : Checks setting from the network. 9.9.1.1.3. Deactivate : Deactivates diversion of incoming calls.●9.9. Call Diverting 9.9.1.2. Busy : It diverts incoming calls while on call. 9.9.1.2.1.Activate : Activates diversion of incoming calls. 9.9.1.2.1.1 Voicemail : This function allows the user to set a voicemail number that has not already been set. 9.9.1.2.1.2 Number : This function is to enter the number that Incoming calls are to be diverted to. 9.9.1.2.2. Status : Checks setting from the network. 9.9.1.2.3. Deactivate : Deactivates diversion of incoming calls. 9.9.1.3. No Reply : It diverts incoming calls when there is no reply. 9.9.1.3.0. 5 second, 15 second, 30 second : It sets time until incoming calls are diverted. 9.9.1.3.1.Activate : Activates diversion of incoming calls. 9.9.1.3.1.1 Voicemail : This function allows the user to set a voicemail number that has not already been set. 9.9.1.3.1.2 Number : This function is to enter the number that Incoming calls are to be diverted to. 9.9.1.3.2. Status : Checks setting from the network. 9.9.1.3.3. Deactivate : Deactivates diversion of incoming calls. 9.9.1.4. Unreachable : It diverts incoming calls when call credit is not enough. 9.9.1.4.1.Activate : Activates diversion of incoming calls. 9.9.1.4.1.1 Voicemail : This function allows the user to set a voicemail number that has not already been set. 9.9.1.4.1.2 Number : This function is to enter the number that Incoming calls are to be diverted to. 9.9.1.4.2. Status : Checks setting from the network. 9.9.1.4.3. Deactivate : Deactivates diversion of incoming calls. 9.9.1.5. Clear Divert : Deactivates all divert functions for incoming calls.
7403Using the menu SO-2510 I 04 Additional040302019.9.2. All Fax It diverts all incoming fax calls. 9.9.2.1. Activate : Activates diversion of incoming fax calls. 9.9.2.2. Status : Checks setting of the network. 9.9.2.3. Deactivate : Deactivates diversion of incoming fax calls.9.9.3. All Data Diverts all incoming data. 9.9.3.1. Activate : Activates diversion of incoming data. 9.9.3.2. Status : Checks setting of the network. 9.9.3.3. Deactivate : Deactivates diversion of incoming data.9.9.4. Clear All Divert Clears all divert functions. ●●●Resets phone to factory settings.9.10.1. Yes Executes resetting. 9.10.2. No Cancels resetting. ●●9.10. Reset Factory Settings Troubleshooting Troubleshooting 76Quick access codes Quick access codes 77Access codes Quick access codes 86Security code Security code 86PIN & PUK PIN & PUK 86PIN2 & PUK2 PIN2 & PUK2 86Barring code Barring code 86
7604Additional7704Additional0203Additional 01Troubleshooting 1. When phone cannot be switched on Check whether battery is discharged.Check whether battery is properly attached.If power cannot be switched on even with travel charger connected, contact A/S center. 2. When message Insert SIM appears Insert SIM card.Insert SIM card correctly.Is the SIM card valid? SIM card itself can be annulled when wrong PUK code is entered.Check whether SIM card contact part is clean and free of any foreign matter.3. When security code is lostThe initial security code is on page 65. When security code already set up is lost, go to A/S center with warranty card.4. To send GPS data to PC Is data cable properly connected?Which was chosen for data port setting? For detail instructions, refer to page 59.Is data baud setting compatible with PC?5. When keypad is different from the language usedSO-2510 supports 10 languages. Ask service provider to supply appropriate language keypad.6. When mobile phone has been dropped in waterSeparate battery and after drying take it to A/S center. ●●●●●●●●●●●●●●Quick access codes1. Messaging 1.7.1. Service Center 1.7.2. Format 1.7.3. Delivery Report1.7.2.1. Text 1.7.2.2. Fax 1.7.2.3. E-mail 1.7.2.4. ERMES1.7.3.1. On 1.7.3.2. Off 1.7. Settings1.7.4. Validity 1.7.5. Request Reply1.7.5.1. On 1.7.5.2. Off1.7.4.1. Maximum 1.7.4.2. 1 Hour 1.7.4.3. 6 Hours 1.7.4.4. 1 Day 1.7.4.5. 3 Days 1.7.4.6. 1 Week1.8.1. Status 1.8.2. Inbox 1.8.3. Language 1.8. Info Message1.1. New Meesage1.2. Inbox1.3. Draft1.4. Sent Messages1.5. Outbox1.6. Templates 1.7. Settings1.8. Info Message1.9. Memory Status1.10. Delete All 1.8.1.1. On 1.8.1.2. Off 1.8.4. Topics 1.10.1. Inbox 1.10.2. Draft 1.10.3. Sent Messages 1.10. Delete All 1.10.4. Outbox 1.10.5. Templates 1.10.6. Phone1.10.7. SIM 1.10.8. All
7804Additional7904Additional0203Additional 012. Contacts 2.6.1. SIM to Phone 2.6.2 Phone to SIM2.6. Copy2.1. Search 2.2. Add Name 2.3. Caller Group 2.4. Speed Dials 2.5. Short Dialing 2.6. Copy2.7. Delete 2.8. Memory Status 2.7.1. One by one 2.7.2. All2.7. Delete 3. Call Logs 3.4.1. Missed Calls 3.4.2. Received Calls 3.4.3. Dialed Calls 3.4. Delete All 3.4.4. All 3.1. Missed Calls 3.2. Received Calls 3.3. Dialed Calls 3.4. Delete All3.5. Call Duration3.5.1. Last call 3.5.2. Received Calls 3.5.3. Dialed Calls 3.5. Call Duration 3.5.4. All Calls 3.5.5. Reset 3.5.5.1. Voice 4. Organizer 4.1.1. Once Alarm 4.1.2. Morning call 4.1. Alarm 4.1. Alarm 4.2. Schedule 4.3. Calculator 4.4. Stopwatch 5. Navigation 5.5.1. Format 5.5.2. Tracking Time 5.5. Setting5.1. Current position 5.2. Cont. position5.3. Way points 5.4. Location tracking5.5. Setting5.6. Qiblah & Prayer4.1.3. Daily Alarm 5.5.1.1. DD.ddd 5.5.1.2. DD/MM/SS.ss 5.5.1.3. DD/MM/SS 5.5.1.4. DD/MM.mm 5.5.1.5. MGRS 5.5.1.6. UTM5.5.2.1. 1 Second 5.5.2.2. 3 Second 5.5.2.3. 10 Second 5.5.2.4. 30 Second 5.5.2.5. 1 Minute 5.5.2.6. 3 Minute 5.5.2.7. 5 Minute 5.5.2.8. 10 Minute 5.5.2.9. 15 Minute 5.5.2.10. 30 Minute 5.5.2.11. 1 Hour2.6.1.1. One by one 2.6.1.2. All2.6.2.1. One by one 2.6.2.2. All2.6.1.1. One by one 2.6.1.2. All2.7.2.1. Phone 2.7.2.2. SIM 2.7.2.3. Phone & SIM
8004Additional8104Additional0203Additional 016. Sound Setting 6.1.1. Concerto for violin 6.1.2. Nutcracker Suite 6.1.3. Funiculi funicula 6.1. Ringing tone6.1. Ringing tone 6.2. Sound Volume 6.3. Incoming Call Alert 6.4. Keypad Tone 6.5. Keypad Tone Volume6.1.4. Gavote 6.1.5. Konigin der Nacht 6.1.6. La donna e' mobile 6.1.7. Libiamo 6.1.8. Minuet bizet 6.1.9. Minuet G major 6.1.10. Mozart symphony 401 6.1.11. Catch 6.1.12. Enmity 6.1.13. Finkl 6.1.14. Free 6.1.15. Fusion samba 6.1.16. Happiness 6.1.17. Iliana 6.1.18. Resolution 6.1.19. Techno 6.1.20. Wilderness 6.1.21. Bell 01 6.1.22. Bell 02 6.1.23. Bell 03 6.1.24. Bell 04 6.1.25. Bell 05 6.1.26. Bell 06 6.1.27. Bell 07 6.1.28. Bell 08 6.1.29. Bell 09 6.1.30. Bell 10 6.3.1. Ringing 6.3.2. Ascending 6.3.3. Ring Once 6.3. Incoming Call Alert 6.3.4. Beep Once6.4.1. DTMF Tone 6.4.2. Drum Tone 6.4.3. Tree Tone 6.4. Keypad Tone6.4.4. Off 7. Settings 7.4.1. Voice 7.4.2. Fax 7.4.3. Data7.4. Owner number 7.1. Language 7.2. Wallpaper 7.3. Greeting Message 7.4. Owner number 7.5. Send Owner Number 7.6. DTMF Tone 7.7. Cost 7.8. Data Connection 7.9. Setup Wizard 7.5.1. Preset 7.5.2. On 7.5.3. Off7.5. Send Owner Number 7.6.1. On 7.6.2. Off7.6. DTMF Tone 7.7.1. Charge Rate 7.7.2. Cost Limit 7.7.3. Cost Displayed7.7. Cost 7.7.3.1. On 7.7.3.2. Off 7.8.1. Data Port 7.8.2. Data Link Rate 7.8. Data Connection 7.8.1.1. UART 7.8.1.2. USB7.8.2.1. Automatic7.8.2.2. 300 Baud7.8.2.3. 1200 Baud7.8.2.4. 2400 Baud7.8.2.5. 4800 Baud7.8.2.6. 9600 Baud7.8.2.7. 19200 Baud7.10 Backlight 7.11. LCD Contrast 7.12. Answer Method 7.13. Auto Redial 7.14. Time/Date6.3.5. Silent
8204Additional8304Additional0203Additional 017. Settings 7.12.1. Auto Answer 7.12.2. Any key 7.12. Answer Method 7.1. Language 7.2. Wallpaper 7.3. Greeting Message 7.4. Owner number 7.5. Send Owner Number7.6. DTMF Tone 7.7. Cost 7.8. Data Connection 7.9. Setup Wizard 7.12.1.1. 10 Second 7.12.1.2. 30 Second 7.12.1.3. Off7.12.2.1. On 7.12.2.2. Off7.14.1. Set Time/Date 7.14.2. Auto Update 7.14. Time/Date 7.14.3. World Time 7.14.4. Time Format7.10 Backlight 7.11. LCD Contrast 7.12. Answer Method 7.13. Auto Redial 7.14. Time/Date7.13.1. On 7.13.2. Off7.13. Auto Redial 7.14.2.1. On 7.14.2.2. Off 7.14.4.1. 24 Hours 7.14.4.2. 12 Hours8. Network 8.1.1. Automatic 8.1.2. Manual8.1. Network mode8.1. Network mode8.2. SAT Registration 8.3. Preference 9. Security 9.1.1. On 9.1.2. Off9.1. PIN code 9.1. PIN code 9.2. Security code 9.3. Change codes 9.4. Fixed Dialing9.2.1. On 9.2.2. Off9.2. Security code 9.3.1. Change PIN 9.3.2. Change PIN2 9.3. Change codes 9.3.3. Security code 9.3.4. Barring code9.4.1. Show List 9.4.2. Add New 9.4. Fixed Dialing9.4.3. On/Off9.4.3.1. On 9.4.3.2. Off 9.4.4. Fixed Dialing Status9.5. Closed User Group9.6. IMEI Number 9.7. Call Barring 9.8. Call Waiting 9.9. Call Divering 9.10. Reset factory settings7.10.1. Always off 7.10.2. 15 Second 7.10 Backlight 7.10.3. 30 Second 7.10.4. Always on
8404Additional8504Additional0203Additional 019. Security 9.5.1. On 9.5.2. Off 9.5. Closed User Group 9.1. PIN code 9.2. Security code 9.3. Change codes 9.4. Fixed Dialing9.7. Call Barring 9.8.1. Activate 9.8.2. Status 9.8. Call Waiting 9.8.3. Deactivate 9.5.3. Preset9.7.1. Outgoing calls 9.7.2. Int. Calls 9.7.3. Int. Exc. to Home 9.7.4. Incoming Calls 9.7.5. Incoming Calls When Abroad 9.7.6. Clear Barring9.7.1.1. Activate 9.7.1.2. Status 9.7.1.3. Deactivate9.7.2.1. Activate 9.7.2.2. Status 9.7.2.3. Deactivate9.7.3.1. Activate 9.7.3.2. Status 9.7.3.3. Deactivate9.7.4.1. Activate9.7.4.2. Status 9.7.4.3. Deactivate9.7.5.1. Activate 9.7.5.2. Status 9.7.5.3. Deactivate9.7.6.1. All 9.7.6.2. Outgoing 9.7.6.3. Incoming 9.5. Closed User Group 9.6. IMEI Number 9.7. Call Barring 9.8. Call Waiting 9. Security 9.1. PIN code 9.2. Security code 9.3. Change codes 9.4. Fixed Dialing9.9. Call Diverting 9.10. Reset Factory Settings9.5. Closed User Group9.6. IMEI Number 9.7. Call Barring 9.8. Call Waiting 9.9.1.2. Busy9.9.1.2.1.Activate 9.9.1.2.1.1 Voicemail 9.9.1.2.1.2 Number 9.9.1.2.2. Status 9.9.1.2.3. Deactivate9.9.1.3. No Reply9.9.1.3.0. 5 second, 15 second, 30 second 9.9.1.3.1.Activate 9.9.1.3.1.1 Voicemail 9.9.1.3.1.2 Number 9.9.1.3.2. Status 9.9.1.3.3. Deactivate9.9.1.4. Unreachable 9.9.1.4.1.Activate 9.9.1.4.1.1 Voicemail 9.9.1.4.1.2 Number 9.9.1.4.2. Status 9.9.1.4.3. Deactivate9.9.1.5. Clear Divert 9.9.4. Clear All Divert 9.9.2.1. Activate 9.9.2.2. Status 9.9.2.3. Deactivate 9.9.1. Voice 9.9.2. All Fax9.9. Call Diverting 9.9.3. All Data 9.9.1.1. All Voice 9.9.2.1. Activate 9.9.2.2. Status 9.9.2.3. Deactivate 9.9.3.1. Activate 9.9.3.2. Status 9.9.3.3. Deactivate9.9.1.1. All Voice9.9.1.1.1.Activate 9.9.1.1.1.1 Voicemail 9.9.1.1.1.2 Number9.9.1.1.2. Status 9.9.1.1.3. Deactivate9.9. Call Diverting 9.10. Reset Factory Settings9.10. Reset Factory Settings9.10.1. Yes 9.10.2. No
8604AdditionalAccess codes There are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorised use.When requested for any of the codes explained below, enter the appropriate code (displayed as asterisks) and press . If you make a mistake, press (Clear) one or more times until the incorrect digit is cleared and then continue entering the correct code.The access codes, except for the PUK1 and PUK2 codes, can be changed using the Security menu (9.).Notice! Avoid using access codes resembling emergency numbers, such as 112, so that you do not accidentally dial an emergency number.Security codeThe Phone lock feature uses the security code to protect your phone against unauthorised use. The phone password is supplied with the phone and is preset to "0000" at the factory.PIN & PUKThe PIN (Personal Identication Number) is 4 to 8 digits. It protects your SIM card against unauthorised use. It is usually supplied with the SIM card. Entering wrong PIN code 3 times will lock the SIM card and to unlock, PUK code must be entered. PUK code is normally supplied with SIM card.PIN2 & PUK2It is required with settings related to PIN2 Network. PIN2 must be entered for Fixed Dialing. As with PIN code, entering wrong PIN2 code 3 times will lock the SIM card and to unlock, PUK2 code must be entered. PUK2 code is normally supplied with SIM card.Barring codeIt is a code controlled in the network for call restriction function. Barring code varies with different service providers and should be supplied by your service provider when you start using the phone. When barring code is lost, it can be renewed by asking your service provider.LIMITED WARRANTYSO-2510 SATELLITE/GSM HANDHELD PHONEThis Limited Warranty is provided to the original end-user purchaser (the ’Buyer’) of any new SO-2510 Satellite/GSM Handheld Phone. This Limited Warranty is non-transferrable.Warranty Coverage and ServiceThuraya warrants all new SO-2510 Satellite/GSM Handheld Phones (the ’Product’) under normal use and wear to be free from defects in material and workmanship for a period of one (1) year from the date of purchase by the original Buyer (the ’Warranty Period’). If, under normal use and wear, the Product becomes defective in materials or workmanship and is returned at Buyer's expense to a Thuraya Authorized Service Center during the Warranty Period, the Product will be repaired or replaced, at Thuraya' sole and exclusive option, and at no charge to Buyer. Buyer will be required to provide reasonable proof of date of purchase. Reconditioned replacement components, parts, units or materials may be used if the Product is repaired or replaced. Costs incurred in the removal, de-installation or reinstallation of the Product are not covered.THIS LIMITED WARRANTY DOES NOT COVER AND THURAYA WILL NOT BE RESPONSIBLE FOR THE FOLLOWING:This Limited Warranty will be void in its entirety if the Product is serviced by anyone other than Thuraya or a Thuraya Authorized Service Centre. Buyer's sole and exclusive remedy shall be the repair or replacement of the defective Product, as specifically described above. Thuraya neither assumes nor authorizes any Authorized Service Centre or any other person or entity to assume any other obligation or liability beyond that which is provided for in this Limited Warranty.This Limited Warranty does not cover the following: products or accessory equipment not manufactured or provided by Thuraya; failures or defects caused by misuse, abuse, accident, alteration or neglect; unauthorized installation, removal or repair; failure to follow instructions; fire, flood or other acts of God; spills of food or liquids; normal wear and tear; improper installation, maintenance,operation or repair; performance of the Product when used in combination with other products or equipment not manufactured or provided by Thuraya; payments for labor or service to representatives or service centers not authorized by Thuraya.This limited Warranty of the Product does not cover the operation, availability, coverage, range or grade of service provided by the satellite and GSM systems.
Limitation of LiabilityTHIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THURAYA SHALL NOT BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, LESS REASONABLE AMOUNT FOR USE AND WEAR, OR FOR ANY INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, OR FOR ANY DELAYS, LOSS OF USE, TIME, PROFITS, REVENUE OR SAVINGS, ANY COMMERCIAL LOSS, INCONVENIENCE, MILEAGE, DAMAGE TO BUYER'S OR TO OTHER PERSON'S VEHICLE OR ANY OTHER PROPERTY, ARISING FROM THE USE OR INABILITY TO USE THE PRODUCT, OR OTHERWISE FOR ANY FAILURE TO PERFORM.All liability and obligations of Thuraya under this Limited Warranty shall terminate upon the expiration of the applicable Warranty Period provided herein. This Limited Warranty sets forth the entire responsibility of Thuraya with respect to the Product. There are no other liabilities of Thuraya arising from the sale of the Product whether based on warranty, contract, negligence or other theories of liability. In no event shall Thuraya' liability exceed the cost of correcting defects as provided herein.This Limited Warranty gives specific legal rights to Buyer, and Buyer also may have other rights which may vary from jurisdiction to jurisdiction.Warranty Card for SO-2510This Warranty Card is only valid with all gaps filled in properly by the dealer.Place the detachable IMEI-label from the gift box here:Dealer’s stamp and signature:Date of purchase:Customer’s name, address, country and telephone number:Asia Pacific Satellite Industries Co., Ltd., hereby declares that this mobile phone is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.© Asia Pacific Satellite Industries Co., Ltd., 2006. All rights reserved.This manual is published by Asia Pacific Satellite Industries Co., Ltd., without any warranty.We reserve the right to make changes and improvements to any of the products described in this manual without prior notice.Printed in the Republic of Korea0682

Navigation menu