Atoms Labs AWF53 HD Outdoor PT Network Camera User Manual JSW QSG WAPP JS V1 0
Atoms Labs LLC HD Outdoor PT Network Camera JSW QSG WAPP JS V1 0
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3469554 |
| Application ID | nDNkfy66Cmmwlp/pwuZ/Cg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 57.78kB (722195 bits) |
| Date Submitted | 2017-07-18 00:00:00 |
| Date Available | 2017-07-18 00:00:00 |
| Creation Date | 2017-07-18 09:25:16 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2017-07-18 09:25:16 |
| Document Title | JSW_QSG_WAPP-JS_V1.0 |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
x1 x1 Hex Key Camera Antenna x1 x1 x1 x1 Rj45 Connect Jack Microphone Antenna Reset Button Micro SD Card Slot Power Cable Ethernet Cable Note: Press and hold the “Reset” button for 5 seconds, the system will be restored into factory default. Light Sensor Lens Mount Bracket. PRODUCT OVERVIEW - For video recording, BE SURE TO use CLASS 10 memory card or above (not included). Other kinds of memory card may cause unexpected results and should be avoided. - Anytime when you find the camera pan/tile function does not perform properly, calibrate the camera to get correct principle position (refer to step 8 of setup the camera section). - For better performance, please enable the video hardware acceleration function. This function only for Andriod (refer to the app introduction section). x1 Quick Start Guide Power Adapter FRIENDLY REMINDER Screw Pack Pan/Tilt Wireless Camera KIT CONTENT : AWF53 HD Outdoor PT Network Camera QUICK START GUIDE For Android to add the camera. (6) Later, APP will request user to modify the default password to private password . (5) Tap “Save” when you done. (4) Enter the default password 123456. information. Or tap "Search" to locate the camera. (3) Tap (QR code icon) and scan the QR code label on the back of the camera to bring up the DID (2) Launch the APP, tap (xxxxxx=Camera ID numbers). Then enter the default password 12345678. (1) In the Wi-Fi setting of your smart device. Choose the Wi-Fi router with prefix of HD-xxxxxx 3a.Wireless Connection steady on. This process would be finished within 1 min and make sure the LED is flashing in RED. Connect the power wires to the adapter supplied, and wait until the RED LED indicator becomes 2. Power up The Camera For iOS Download and install the "OMGuard HD" APP to your device. 1. APP Download SETUP THE CAMERA Power Adapter Rj45 Connect Router then the advanced setting icon will appear on the screen. Enter Admin Password (default 123456) Choose the appropriate Wi-Fi router on your local network Note: If you fail to add the camera for several times, press and hold the “Reset” button for 5 seconds to reset it. Advanced (4) The Camera will offline for around 40 seconds to reboot for Wifi connection. When camera connects to Wi-Fi router correctly, the RED LED will stay ON. (5) In the Wi-Fi setting on your smart device again, make sure the Wi-Fi router you are connecting to is the same as the camera. If not, manually assign to it. (2) Enter the default password :12345678 (3) Select your Wi-Fi router, and enter its password. (1) Tap 4. Wi-Fi Setting Note: In soft AP mode, the RED LED long flashes once followed by 2 short flashes. In normal mode, the LED is flashing in RED. (1) Make sure your smartphone is connected your Wi-Fi router. (2) Connect the camera’s Ethernet cable to the Rj45 connect, and power on the camera with adapter. (3) Launch the APP, tap the “Search” to locate the camera. (4) Enter the default password 12345678 and save the settings. (5) Later, APP will request user to modify default password to private password . 3b.Wired Connection Live-View Return Setup Camera Position Snapshot Mute Video Record Arm/Disarm (1) (1)-1 (2) (3) (4) (1) Tap the icon to access the event list section. (2) Select the time interval for the event list. (3) Select the file you want to playback. (4) If you want to store the files to the mobile device, tap to download the files (Best while under Wi-Fi enviornment due to larger high defination data size). Follow the steps below for Event Playback Refresh Camera Setting Add Camera Information Live View Camera List APP INTRODUCTION (2) Note: Before mounting the camera, install the memeory card if you prefer recording to local storage. (1) Drill the mounting holes by using the aligmaent paper. (2) Insert 4 screw anchors into the wall. (3) Insert 2 screws into the screw anchors, reserved space 8 to 10 mm. Then Hang the camera on 2 screws. (4) Fasten 4 screws by using hex key. CAMERA INSTALLATION (1) In the camera list, tap the (2) Click the click box to enable video hardware acceleration. (1) Enable video hardware acceleration (For Andriod) If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory regulations. Disposal of spent batteries/accumulators: You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent batteries/accumulators with common household waste is prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols on the side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be charged to the designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following these instructions will allow you to fulfill the legal requirements and contribute to the protection of our environment! Products with CE Marking comply with EMC Directive (2014/30/EU); Low Voltage Directive (2014/35/EU); RED (2014/53/EU); ROHS Directive (2011/65/EU) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: EMC: EN 301 489 LVD: EN 60950 Radio: EN 300 328 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation -- Consult the dealer or an experienced radio/TV technician for help -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Startup Profile : Print Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2017:07:18 09:25:16+08:00 Modify Date : 2017:07:18 09:25:16+08:00 Metadata Date : 2017:07:18 09:25:03+08:00 Creator Tool : PScript5.dll Version 5.2 Thumbnail Width : 256 Thumbnail Height : 160 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8407 bytes, use -b option to extract) Document ID : uuid:09E8C0EC576BE711B840CD251E3159E2 Instance ID : uuid:f25946fe-e140-4c33-a469-ae9d61f9b89e Derived From Instance ID : uuid:ff6ddc76-fd98-44c5-bb06-37966ede9933 Derived From Document ID : xmp.did:7E7BA5A16440E711A27F902A5AB7F6DA Derived From Rendition Class : proof:pdf Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 29.699996 Max Page Size H : 21.000217 Max Page Size Unit : Centimeters Font Name : MyriadPro-SemiboldSemiCnIt, MyriadPro-Regular, MyriadPro-It, MyriadPro-SemiboldSemiCn Font Family : Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Semibold SemiCondensed Italic, Regular, Italic, Semibold SemiCondensed Font Type : Open Type, Open Type, Open Type, Open Type Font Version : Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671 Font Composite : False, False, False, False Font File Name : MyriadPro-SemiboldSemiCnIt.otf, MyriadPro-Regular.otf, MyriadPro-It.otf, MyriadPro-SemiboldSemiCn.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Format : application/postscript Title : JSW_QSG_WAPP-JS_V1.0 Creator : Administrator Page Count : 3 Author : AdministratorEXIF Metadata provided by EXIF.tools