BUFFALO 09102034-1 AirStation Wireless-N NFINITI HighPower Keychain USB 2.0 Adapter User Manual Part 2

Download:
Mirror Download [FCC.gov]
Document ID	1315474
Application ID	F/q8LGVVUS2gtZhKK0AueA==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	51.41kB (642607 bits)
Date Submitted	2010-07-21 00:00:00
Date Available	2010-07-21 00:00:00
Creation Date	2010-07-07 11:58:03
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2010-07-07 11:58:16
Document Title	User Manual Part 2
Document Creator	Adobe InDesign CS4_J (6.0.5)

Chapter 4 Client Manager
Profiles
Connect to an access point or edit a profile.
Parameter
Meaning
Connect
Selecting a profile and clicking this button will connect to an access
point using a stored profile.
Add
Click this to add a new profile. It will display the Profiles Information
screen (page 52).
Edit
Click this to edit or delete information in a profile.
WPS AOSS
Click this button to have AOSS/WPS (PBC) automatically set security.
After connection, a profile based on these settings will be created.
802.1x Profiles
This button is displayed when Client Manager is operating in
Business Mode. Click to configure 802.1x authentication.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
51
Chapter 4 Client Manager
Profile Information (Basic)
Configure your profile settings.
Parameter
Meaning
Display Icon
Select an icon to display on the profile from the list.
Select Profile
Connection may be wireless or wired (Ethernet). For use with the
AirStation, select Wireless.
Profile Name
Enter a name for the profile.
Network Type
Select infrastructure mode to connect to an access point
(recommended), or ad-hoc mode to connect directly to another
wireless client.
SSID
Select the SSID of the wireless access point that the profile will
connect to.
Channnel
Choose the wireless channel. In Infrastructure Mode, the channel is
automatically configured.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
52
Chapter 4 Client Manager
Parameter
Meaning
Encryption Method
Select the encryption method used by the wireless access point.
Transmission Key
If WEP is used for the Encryption Method, 4 passphrases may be
entered. Use of the first (at least) is recommended.
Encryption Key
Enter the encryption key (passphrase) for the access point.
AP is set to exclusive connection
Check if the access point’s SSID is not broadcast.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
53
Chapter 4 Client Manager
Profile Information (Network)
The profile’s IP address and subnet mask may be manually assigned.
Parameter
Meaning
Do not change IP Address settings of
this Profile
Check to keep using current TCP/IP network settings.
Automatically acquire the IP Address
Check to automatically acquire the IP address from a DHCP server
when connecting wirelessly.
Automatically acquire the DNS Server Check to automatically aquire the DNS server address from a DHCP
Address
server when connecting wirelessly.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
54
Chapter 4 Client Manager
Profile Information (Browser)
Configure your Internet Explorer settings when connecting wirelessly.
Parameter
Meaning
Do not change the browser settings
of this Profile
Check to use current Internet Explorer settings when connecting
wirelessly. Uncheck to use any of the settings below.
Address to use as Home Page
To use a different home page in Internet Explorer when connecting
wirelessly, enter it here.
Use the Proxy Server
To use a proxy server for Internet Explorer when connecting
wirelessly, enter its IP address and a port number and check the
box.
Do not use the proxy server for a local If checked, the proxy server will not be used for local addresses.
address
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
55
Chapter 4 Client Manager
Profile Information (Printers)
Configure the printer that your computer uses when connected wirelessly.
Parameter
Meaning
Do not change the printer settings of
this Profile
Select this option to use a different printer when connecting
wirelessly.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
56
Chapter 4 Client Manager
System Tray Menu
Right-click on the Client Manager icon in the system tray to display the following choices.
Parameter
Meaning
Status
Displays the Status screen (page 47).
Scan
Displays the Scan screen (page 49).
Profile
Displays the Profiles screen (page 51).
Easy Connection
Runs Automatic Secure Setup, using one of the following
connection methods: AOSS, WPS(PBC), or WPS(PIN).
Help
Displays Client Manager Help.
Option
Displays the Options menu screen (page 58).
Version Information
Displays Client Manager version information.
Exit
Exits Client Manager.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
57
Chapter 4 Client Manager
Option Menu
Configure Client Manager options.
Parameter
Meaning
Mode
Switch between Client Manager’s operating modes. If you select
“Business Mode”, the button to configure 802.1x authentication
appears on the Profiles screen (Page 51). “Home Mode” is
recommended.
Lock
If you click this, you will not be able to add new profiles or edit
existing profiles. To lock or unlock, enter the password (8 - 63
characters).
Export a profile
Click this to save the currently registered profile information. To
save profile information, enter the password ( 8 - 63 characters).
Import a profile
Click this to import a saved profile into Client Manager. You’ll need
to enter the password for the profile to continue.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
58
Chapter 4 Client Manager
Parameter
Meaning
Initialize profile
Click this to initialize profile information. Before initializing profile
information, unlock the unit.
Use the following network adapter
Select a network adaptor to use in Client Manager. “Wireless
Adapter Auto-select” is recommended for most users.
Automatically connect to the profile
with highest priority
If checked, it will attempt to connect to the profile with highest
priority as assigned on the Profile screen (page 51). Checked is
recommended for most users.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
59
Chapter 5 - Trouble Shooting
The Computer does not recognize the WLI-UCG300HP Wireless Adapter.
• Make sure this unit is connected to a USB port on your computer.
• If your computer has multiple USB ports, connect to a different USB port.
• Refer to page 7 "Install Wireless Drivers", and reinstall drivers for this unit.
Cannot connect to the network wirelessly.
• Refer to chapter 3 to connect this unit to an access point wirelessly.
• Configure the same SSID, encryption method, and encryption key for each wireless device.
These settings must match those of your wireless access point.
• move your wireless devices closer to the access point.
• Restart your access point.
You forgot the AP's SSID, Encryption KEY, or
Password.
Try to connect wirelessly with AOSS or WPS (PBC) if your access point supports either of them (chapter
3, page 15).
Ask your network administrator for SSID and encryption settings if the access point does not
support AOSS/WPS (PBC).
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
60
Chapter 5 Trouble Shooting
The link speed is slower than 300 Mbps (Maximum
link speed is only 144Mbps).
The default setting for 300 Mbps mode on the AirStation is “off”. Refer to "300 Mbps Mode settings"
on page 64 to turn on 300 Mbps mode.
Other Tips
Issue:
When using the Windows wireless connection manager, I cannot connect to my wireless router. I
receive a "Cannot configure wireless network" error message when scanning for available wireless
networks.
Answer:
Another wireless client software may be installed on your computer that is taking control of the
wireless client adapter away from the Windows connection manager. Either switch to the other
software or use Add/Remove Programs to remove the conflicting client software. After rebooting,
the Windows connection manager should be able to connect to the available wireless networks.
Issue:
When I attempt to connect to my wireless router, I receive an error message indicating that security
settings on my computer do not match the settings on the router.
Answer:
Manually enter the correct security key and encryption type into the Windows connection manager.
To enter the security key in Windows XP:
Go to the View Available Wireless Networks and select change Advanced Settings. Click on the
Wireless Networks tab. There will be a list of networks to which you have previously connected.
Highlight the network name (SSID) of the wireless router and select Properties. Enter the correct
encryption key and select correct the encryption type as configured on the wireless router.
Go to the Connect to Network, right-click on the name of the network and click Properties. Highlight
the name of your network and go to Properties. Enter the correct encryption key and select correct
the encryption type as configured on the wireless router.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
61
Chapter 5 Trouble Shooting
Issue:
What can I do if my wireless connection drops randomly or seems slow?
Answer:
There are many environmental factors that may affect this behavior. First, ensure the issue is not
range related by locating the wireless router and the client in closer proximity and check whether
the connection drops continue.
In some cases, interference from other wireless networks or sources such as 2.4 GHz wireless phones
may impact performance. To work around this scenario, change the wireless channel used by your
wireless router.
Log in to the wireless router with your browser. Click on the [Wireless Configuration]. If an AutoChannel option is available, attempt to use this option to remedy the problem. If Auto-Channel is
unavailable, manually select an alternate channel.
Issue:
Though I am able to successfully make a connection with my wireless router, I am unable to access
the Internet with my web browser.
Answer:
First, power off the Cable or DSL modem, the wireless router, and then your computer. Pressing
the power button or simply unplugging the devices can power off the modem and wireless router
devices. Then after verifying that the modem is connected to the wireless router with a cable to the
WAN port, power on the modem and wait two minutes. Turn on the wireless router and then the
computer. Verify whether an Internet connection is available.
If, after these steps, an Internet connection is still unavailable, power off the Cable or DSL modem
and computer again and directly connect your computer to the Cable or DSL modem with a cable
between the computer and the port on the modem. Power on the modem and wait two minutes.
Power on the computer and again check for an Internet connection.
If an Internet connection is not available with a direct connection to the computer, please call the
Internet Service Provider who installed the modem.
If an Internet connection is available with a direct connection to the computer, please call our
customer support line.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
62
Chapter 5 Trouble Shooting
Issue:
Where can I download the latest drivers, firmware and instructions for my Buffalo wireless products?
Answer:
The latest drivers and firmware with installation instructions are available online at
www.buffalotech.com
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
63
Appendix
300 Mbps Mode settings
By default, the AirStation’s 300 Mbps mode is disabled. Use the following proceedure to enable it if
desired.
1. Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [AirStation 300Mbps Mode
Setting] and launch the utility software.
		 If you are using Windows 7 or Vista and see the message "A program needs your permission
to continue", click [Continue].
2. When the message "Now start the step wizard of 300Mbps Mode" is displayed, click [Next].
3. Click [Next].
4. When the message "Select of wireless adapter" appears, select this unit and click [Next].
5. Select "Use 300Mbps Mode (40MHz)", and click [Next].
6. When the message "Setting of wireless adapter is complete" is displayed, click [Finish the
setup].
If you still cannot establish a 300 Mbps connection, check the settings for your access point.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
64
Appendix
Specifications
Wireless LAN Interface
Standard Compliance
IEEE802.11b / IEEE802.11g / IEEE802.11n
Transmission Method
Direct Sequence Spread Spectrum (DSSS), OFDM, MIMO
Frequency Range
2,412 - 2,462 MHz (Channels 1 - 11)
Transmission Rate
802.11b/g:
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, 1 Mbps
802.11n:
20 MHz BW
(Long GI) 130, 117, 104, 78, 52, 39, 26, 13 Mbps (2 stream)
65, 58.5, 52, 39, 26, 19.5, 13, 6.5 Mbps (1 stream)
(Short GI) 144.4, 130, 115.5, 86.7, 57.8, 43.3, 28.9, 14.4 Mbps (2 stream)
65, 72.2, 57.8, 43.3, 28.9, 21.7, 14.4, 6.5 Mbps (1 stream)
40 MHz BW
(Long GI) 270, 243, 216, 162, 108, 81, 54, 27 Mbps (2 stream)
135, 121.5, 108, 81, 54, 40.5, 27, 13.5 Mbps (1 stream)
(Short GI) 300, 270, 240, 180, 120, 90, 60, 30 Mbps (2 stream)
150, 135, 120, 90, 60, 45, 30, 15 Mbps (1 stream)
Access Mode
Infrastructure Mode
Security
WPA2 (TKIP/AES), WPA-PSK (TKIP/AES), 128/64bit WEP
Other
Power Supply
5.0 V Bus powered
Power Consumption
2500 mW (Max)
Dimensions
26 mm x 15 mm x 100 mm (1.0 x 0.6 x 9.91 cm.)
Weight
30 g (31.18 g.)
Operating Environment
0-40 C (32-104°F) , 20-80 % (non-condensing)
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
65
Appendix
Removing the device from the computer
Windows Vista/XP
If you use Windows 7 / Vista / XP, just unplug it.
Windows 2000
If you use Windows 2000, follow the procedure described below.
1. Click the icon (
) displayed in the system tray.
2. Click [Safely remove BUFFALO WLI-UC-G300HP Wireless LAN Adapter].
3. Click [OK].
4. Unplug this unit.
Uninstalling the Software
To uninstall the software, follow the procedure described below.
1. Insert AirNavigator CD.
		 When you insert CD, AirNavigator Setup Wizard will launch automatically.
		 If AirNavigator Setup Wizard is not displayed, double click [My Computer] icon > CD-ROM
drive icon > [AirNavi.exe].
2. Click [Options].
3. Click [Uninstall software].
4. Follow the insturctions on the screen to delete the Utility software.
Uninstalling the Drivers
To remove the AirStation wireless client drivers, follow the procedure described below.
1. Insert AirNavigator CD.
		 When you insert CD, AirNavigator Setup Wizard will launch automatically.
		 If AirNavigator Setup Wizard is not displayed, double click [My Computer] icon > CD-ROM
drive icon > [AirNavi.exe].
2. Click [Options].
3. Click [Remove Drivers].
4. Follow the insturctions on the screen to remove drivers.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
66
Appendix
TCP/IP Settings in Windows
Windows 7
To configure TCP/IP in Windows 7, follow the procedure below.
Click [Start] > [Control Panel] > [Network and Internet].
Double click [Network and Sharing Center].
Click [Change Adapter Settings] on the left side menu.
Right click on [Local Area Connection], then click [Properties].
If the message “Windows needs your permission to continue” appears, click [Continue].
Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each settings. Example:
If the router’s IP address is 192.168.11.1,
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
192.168.11.1
Preferred DNS server
192.168.11.1
Alternate DNS server
blank
Click [OK].
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
67
Appendix
Windows Vista
To configure TCP/IP in Windows Vista, follow the procedure below.
Click [Start] > [Settings] > [Control Panel].
Double click [Network and Sharing Center].
Click [Manage network connections] on the left side menu.
Right click on [Local Area Connection], then click [Properties].
When the message [Windows needs your permission to continue], click [Continue].
Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties].
To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each settings. Example:
If the router’s IP address is 192.168.11.1,
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
192.168.11.1
Preferred DNS server
192.168.11.1
Alternate DNS server
blank
Click [Close].
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
68
Appendix
Windows XP
To configure TCP/IP in Windows XP, follow the procedure below.
Click [Start] > [Settings] > [Control Panel].
Double click [Network].
Right click on [Local Area Connection], then click [Properties].
Select [Internet Protocol (TCP/IP)], then click [Properties].
To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each settings. Example:.
If the router’s IP address is 192.168.11.1,
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
192.168.11.1
Preferred DNS server
192.168.11.1
Alternate DNS server
blank
Click [Close].
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
69
Appendix
Antenna Information
The WLI-UC-G300HP has a flexible antenna that may be used in different positions. Adjust the angle
for the best signal as needed. Turning the unit so that the wireless AP is directly to one side of the
WLI-UC-G300HP will probably give the strongest signal.
Range
0°-180°
HighPower
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
HighPowe
P er
70
Appendix
FCC / CE / R&TTE Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Important Note - FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow
operation instruction as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
SAR compliance has been established in typical laptop computer(s) with USB slot, and product
could be used in typical laptop computer with USB slot. Other application like handheld PC or
similar device has not been verified and may not compliance with related RF exposure rule and such
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
71
Appendix
use shall be prohibited.
The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destination. The
firmware setting is not accessible by the end user.
Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Important Note - Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with Canada RF exposure compliance requirements, please
follow operation instruction as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Taiwan:
SAR compliance has been established in typical laptop computer(s) with a CardBus slot, and product
could be used in typical laptop computer with a CardBus slot. Other application like handheld PC or
similar device has not been verified, may not comply with related RF exposure rules, and such use
shall be prohibited.
Europe - EU Declaration of Conformity:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
EN60950-1: (2006)
Safety of Information Technology Equipment
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
72
Appendix
EN62311 : (2008)
Assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields (0 Hz – 300 GHz)
EN 300 328 V1.7.1: (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum
modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the
R&TTE Directive
EN 301 489-1 V1.8.1: (2008-04)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements
EN 301 489-17 V2.1.1 (2009-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission
Systems
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU
member states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain
authorization to use the device for setting up outdoor radio links and/or for supplying public access
to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the
RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For
detailed information the end-user should contact the national spectrum authority in France.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
73
Appendix
Česky [Czech]
Buffalo Technology Inc. tímto prohlašuje, že tento WLI-UC-G300HP / WLI-UC-G300HP-V1 je ve shodě
se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk [Danish]
Undertegnede Buffalo Technology Inc. erklærer herved, at følgende udstyr WLI-UC-G300HP / WLIUC-G300HP-V1 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch [German]
Hiermit erklärt Buffalo Technology Inc., dass sich das Gerät WLI-UC-G300HP / WLI-UC-G300HP-V1
in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti [Estonian]
Käesolevaga kinnitab Buffalo Technology Inc. seadme WLI-UC-G300HP / WLI-UC-G300HP-V1
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele
asjakohastele sätetele.
English
Hereby, Buffalo Technology Inc., declares that this WLI-UC-G300HP / WLI-UC-G300HP-V1 is in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Español [Spanish]
Por medio de la presente Buffalo Technology Inc. declara que el WLI-UC-G300HP / WLI-UCG300HP-V1 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o
exigibles de la Directiva 1999/5/CE.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Buffalo Technology Inc. ΔΗΛΩΝΕΙ ΟΤΙ WLI-UC-G300HP / WLI-UC-G300HP-V1
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ
ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français [French]
Par la présente WLI-UC-G300HP / WLI-UC-G300HP-V1 déclare que l’appareil [type d’appareil] est
conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/
CE.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
74
Appendix
Italiano [Italian]
Con la presente Buffalo Technology Inc. dichiara che questo WLI-UC-G300HP / WLI-UC-G300HP-V1 è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
Ar šo Buffalo Technology Inc. deklarē, ka WLI-UC-G300HP / WLI-UC-G300HP-V1 atbilst Direktīvas
1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių [Lithuanian]
Šiuo Buffalo Technology Inc. deklaruoja, kad šis WLI-UC-G300HP / WLI-UC-G300HP-V1 atitinka
esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart Buffalo Technology Inc. dat het toestel WLI-UC-G300HP / WLI-UC-G300HP-V1 in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/
EG.
Malti [Maltese]
Hawnhekk, Buffalo Technology Inc., jiddikjara li dan WLI-UC-G300HP / WLI-UC-G300HP-V1
jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva
1999/5/EC.
Magyar [Hungarian]
Alulírott, Buffalo Technology Inc. nyilatkozom, hogy a WLI-UC-G300HP / WLI-UC-G300HP-V1 megfelel
a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish]
Niniejszym Buffalo Technology Inc. oświadcza, że WLI-UC-G300HP / WLI-UC-G300HP-V1 jest zgodny
z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese]
Buffalo Technology Inc. declara que este WLI-UC-G300HP / WLI-UC-G300HP-V1 está conforme com
os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko [Slovenian]
Buffalo Technology Inc. izjavlja, da je ta WLI-UC-G300HP / WLI-UC-G300HP-V1 v skladu z bistvenimi
zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak]
Buffalo Technology Inc. týmto vyhlasuje, že WLI-UC-G300HP / WLI-UC-G300HP-V1 spĺňa základné
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
75
Appendix
Suomi [Finnish]
Buffalo Technology Inc. vakuuttaa täten että WLI-UC-G300HP / WLI-UC-G300HP-V1 tyyppinen
laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Svenska [Swedish]
Härmed intygar Buffalo Technology Inc. att denna WLI-UC-G300HP / WLI-UC-G300HP-V1 står I
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
根據 NCC 低功率電波輻射性電機管制辦法：
第十二條：
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能。
第十四條：
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，
並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率
射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
이 기기는 가정용으로 전자파적합등록을 한 기기로서 주거지역에서는 물론 모든 지역에서 사
용할 수 있습니다 .
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음
법에 의해 전방향 전파발사 및 동일한 정보를 동시에 여러 곳으로 송신하는 점 - 대 - 다지 점
서비스에의 사용은 금지되어 있습니다 .
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
76
Appendix
Environmental Information
• The equipment that you have purchased has required the extraction and use of natural resources
for its production.
• The equipment may contain hazardous substances that could impact health and the environment.
• In order to avoid the dissemination of those substances in our environment and to diminish the
pressure on the natural resources, we encourage you to use the appropriate take-back systems.
• The take-back systems will reuse or recycle most of the materials of your end life equipment in a
sound way.
• The crossed-out wheeled bin symbol invites you to use those systems.
• If you need more information on the collection, reuse and recycling systems, please contact your
local or regional waste administration.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
77
Appendix
Warranty Information
Buffalo Technology (Buffalo Inc.) products come with a two-year limited warranty from the date of
purchase. Buffalo Technology (Buffalo Inc.) warrants to the original purchaser the product; good
operating condition for the warranty period. This warranty does not include non-Buffalo Technology
(Buffalo Inc.) installed components. If the Buffalo product malfunctions during the warranty period,
Buffalo Technology/(Buffalo Inc.) will, replace the unit, provided the unit has not been subjected
to misuse, abuse, or non-Buffalo Technology/(Buffalo Inc.) authorized alteration, modifications or
repair.
All expressed and implied warranties for the Buffalo Technology (Buffalo Inc) product line including,
but not limited to, the warranties of merchantability and fitness of a particular purpose are limited in
duration to the above period.
Under no circumstances shall Buffalo Technology/(Buffalo Inc.) be liable in any way to the user
for damages, including any lost profits, lost savings or other incidental or consequential damages
arising out of the use of, or inability to use the Buffalo products.
In no event shall Buffalo Technology/(Buffalo Inc.) liability exceed the price paid for the product from
direct, indirect, special, incidental, or consequential damages resulting from the use of the product,
its accompanying software, or its documentation. Buffalo Technology (Buffalo Inc.) does not offer
refunds for any product.
@ 2003-2010 Buffalo Technology (Buffalo, Inc.)
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
78
Appendix
Contact Information (USA / Canada)
Buffalo Technology USA Inc.
11100 Metric Blvd, Suite 750
Austin, TX 78758-4018
GENERAL INQUIRIES
Monday through Friday
8:30am-5:30pm CST
Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 |
Email: sales@buffalotech.com
TECHNICAL SUPPORT
North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and
Canada).
Toll-free: (866) 752-6210 | Email: info@buffalotech.com
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
79
Appendix
Contact Information (Europe)
Buffalo Technology UK LTD
176 Backingham Avenue,
Slough, Berkshire, SL1 4RD
United Kingdom
GENERAL INQUIRIES
Email: sales@buffalo-technology.com
TECHNICAL SUPPORT
Phone (UK only): 08712 50 12 60*
Phone: +353 61 70 80 50
Email: sales@buffalo-technology.com
*Calls cost 8.5p per minute
Technical Support Operating Hours
Monday - Friday (GMT)
9:00 AM - 6:00 PM Monday-Thursday
9:00 AM - 4:30 PM Friday
At Buffalo Technology, we constantly update our software and firmware. For the most recent
software, firmware, driver, and technical whitepaper releases available, please visit the Buffalo
Technology website: www.buffalotech.com.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
80

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2010:07:07 11:58:16+08:00
Create Date                     : 2010:07:07 11:58:03+08:00
Metadata Date                   : 2010:07:07 11:58:16+08:00
Creator Tool                    : Adobe InDesign CS4_J (6.0.5)
Format                          : application/pdf
Document ID                     : uuid:46c72163-0439-4ea0-8266-afe83f647d2c
Instance ID                     : uuid:32b19a2f-c127-496a-b9b2-b71bec8d387d
Producer                        : Adobe PDF Library 9.0
Page Count                      : 30
Creator                         : Adobe InDesign CS4_J (6.0.5)

EXIF Metadata provided by EXIF.tools