Broadcom BRCM1017 Broadcom 802.11ag WLAN Mini PCI Card User Manual 578 100 097C
Broadcom Corporation Broadcom 802.11ag WLAN Mini PCI Card 578 100 097C
Broadcom >
Contents
- 1. Users Guide
- 2. user guide
- 3. Updated portable user guide
- 4. user guide PP07L
- 5. user guide PPT
- 6. PP02X user guide part 1
- 7. PP02X user guide part 2
- 8. PP05L user guide part 1
- 9. PP05L user guide part 2
- 10. Updated User guide partable platform
- 11. User guide PP02X part 1
- 12. User guide PP02X part 2
- 13. User guide PP05L part 1
- 14. User guide PP05L part 2
- 15. User guide PP07L
- 16. User guide PPT
- 17. users manual
- 18. Host Manual 1
- 19. Host Manual 2
Host Manual 2
Compliance Statement Insert Device Name: Data Collection Computer The responsible party for the compliance of this device is: Model Number: CV60 Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 USA This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. FCC Digital Emissions Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the radio of television receiving antenna. Increase the separation between the computer equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. Consult the dealer or an experienced radio television technician for help. Canadian Digital Apparatus Compliance This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This device contains radio frequency transmitters approved by the Federal Communications Commission under FCC ID: EHABTM210 and FCC ID: QDS-BRCM1017 . WARNING: Per the FCC radio frequency (RF) exposure requirements, (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements. The integral antennas approved for use are not to be serviced by the user. (2) When installing and using Intermec CV60, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or nearby persons and the antennas at the top of the unit. The antenna area must not be touched during transmitter operation. (3) RF safety requirements mandate this device cannot be co-located with other transmitters. 578-100-097 Revision C *578-100-097C* *578-100-097C* Page 1 of 2 DECLARATION OF CONFORMITY (According to ISO/IEC Guide 22 and EN 45014) THE PRODUCT HEREWITH COMPLIES WITH THE REQUIREMENTS OF : THE LOW-VOLTAGE DIRECTIVE 73/23/EEC. THE EMC DIRECTIVE 89/336/EEC. THE R&TTE DIRECTIVE 1999/05/EC. Manufacturer’s Name: Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 European Representative: Intermec International Incorporated Reading Int’l Business Park Basingstoke Road Reading, Berkshire RG2 6DD United Kingdom Declares that the product listed below: Product Type: ITE/Residential, Commercial, and Light Industrial Product Name: Data Collection Computer Model Number: CV60 Product Options: ALL Beginning Serial Number: All Date Issued: July 06, 2006 Conforms to the following product specifications: Safety: IEC 60950-1 / EN 60950-1 EMC: EN 55022 : 1998 / CISPR Publication 22 : 1997, Class B Limits and Methods EN 55024 : 1998 (CISPR 24) Information Technology Equipment – Immunity Characteristics – Limits and Methods of Measurement EN61000-3-2 : 2000 – Harmonic Current Emissions EN61000-3-3 : 1995 – Voltage Fluctuation and Flicker Radio: ETSI EN 300 328-2 ETSI EN 301 489-17 I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s). Company Official: Michael Abel Signature: Signed Copy on File Position: Vice President Date: _06-July-2006_______ European Contact: Intermec International Incorporated, Reading Int’l Business Park, Basingstoke Road, Reading, Berkshire, RG2 6DD United Kingdom; Phone: +44 118 923 0800; Fax +44 118 923 0801 578-100-097 Revision C *578-100-097C* *578-100-097C* Page 2 of 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Create Date : 2007:05:01 14:30:59Z Creator Tool : PrimoPDF http://www.primopdf.com Modify Date : 2007:05:01 17:38:54-07:00 Metadata Date : 2007:05:01 17:38:54-07:00 Format : application/pdf Creator : frydave Title : Microsoft Word - 578-100-097C.doc Producer : AFPL Ghostscript 8.53 Document ID : uuid:7d3da2ff-ae3d-4184-9405-eafcb8f1480f Instance ID : uuid:b0b610bd-2808-495c-ab0e-8bdd056540cd Page Count : 2 Author : frydaveEXIF Metadata provided by EXIF.tools