Cadco Systems PAP2400 Power Access Point User Manual Installation Front

Download:
Mirror Download [FCC.gov]
Document ID	474193
Application ID	UCkcA2tnemlcbjyAnXZdyw==
Document Description	Installation Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	293.67kB (3670888 bits)
Date Submitted	2004-09-29 00:00:00
Date Available	2004-09-29 00:00:00
Creation Date	2004-06-22 20:35:27
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-07-08 17:29:41
Document Title	Installation-Front.cdr
Document Creator	PScript5.dll Version 5.2
Document Author:	Angee

DUAL RADIO HOT SPOT
& SERVER
QUICKSTART GUIDE
CADCO SYSTEMS
1.
Inventory
- Access Point
- 5 ft. Mast Pipe
- 4 Clamps
- Bag of Bolts
- Ethernet
- RS232
- Power
- AC Adapter
- Server
Note: Verify that all equipment has been recieved and is of the correct type.
2.
Installation
Step 1. Make sure you have all of
the appropriate tools, wrench &
socket and screwdriver.
Step 2. Position one set of clamps
around the center satellite pole.
Partially screw in eight of the bolts.
Leave space to slide in the adjacent
pole.
Step 3. Slide the adjacent pole between
the clamps. Fasten the bolts. Position the
second set of clamps around both
poles and fasten the remaining bolts.
Step 4. Align the Access Point so that
the top of the box is even with the top
of the satellite. Fasten the box to the
top of the pole with the small clamp and
remaining bolts.
3.
Server Setup
RS232
To Linkstar RCST
Ethernet
Molex Connector
4.
Hot Spot & Server Positioning
Line of Site
to the Parking Area
Line of Site
to the Roadway
Truck
Stop
This product intentionally uses RF enerergy and has been evaluated for RF exposure at a distance of 20 cm (8 inches). The antenna used
with this product must be mounted to maintain a separation distance of 20cm to all persons. Operation at a separation distance less than
20 cm (8 inches) from the radiating element to nearby persons will expose nearby persons to RF levels that exceed the FCC rules for RF
exposure and will violate FCC rules and regulations.
WARNING
THIS EQUIPMENT COMPLIES WITH PART 15 OF THE FCC RULES.
ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED
BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
CADCO
SYSTEMS
2363 Merritt Dr.
Garland, TX 75041
Phone: (972) 271-3651
Toll Free: (800) 877-2288
Fax: (972) 271-3654

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:06:22 20:35:27Z
Modify Date                     : 2004:07:08 17:29:41-05:00
Page Count                      : 6
Creation Date                   : 2004:06:22 20:35:27Z
Mod Date                        : 2004:07:08 17:29:41-05:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Angee
Metadata Date                   : 2004:07:08 17:29:41-05:00
Creator                         : Angee
Title                           : Installation-Front.cdr
Has XFA                         : No

EXIF Metadata provided by EXIF.tools