CeoTronics CTMUPTTBT CT-Multi-PTT User Manual Handmikrofon SM 3 mit integriertem Lautsprecher
CeoTronics AG CT-Multi-PTT Handmikrofon SM 3 mit integriertem Lautsprecher
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2806746 |
| Application ID | ogImuN41v3RwgXRqjzIg7w== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 155.42kB (1942747 bits) |
| Date Submitted | 2015-11-09 00:00:00 |
| Date Available | 2015-11-09 00:00:00 |
| Creation Date | 2017-09-04 02:24:00 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-09-04 02:24:00 |
| Document Title | Handmikrofon SM 3 mit integriertem Lautsprecher |
CT -M ult i-PT T Blue t oot h Operation Instructions English- USA - Canada Revision: 02/1015 DOK 1643-us Contents Warning - and Safety instructions ................................................................... 3 1.1 General safety instructions....................................................................................................... 3 Abbreviations and Terms................................................................................ 5 Scope of delivery ............................................................................................ 5 Labeling of the product ................................................................................... 5 Product description......................................................................................... 6 5.1 Description ............................................................................................................................... 6 5.2 Fixation clamp.......................................................................................................................... 9 5.3 CT-Multi-PTT Bluetooth with CT-ClipCom Digital ................................................................... 10 5.3.1 EarMike .......................................................................................................................... 10 5.3.2 Earphone with BoomMike ............................................................................................... 11 5.3.3 Use with standard ear plug ............................................................................................. 12 Preparing the Product for Use ...................................................................... 12 6.1 Receipt of Goods ................................................................................................................... 12 Operating Instruction .................................................................................... 13 7.1 Change of the battery ............................................................................................................ 13 7.1.1 Change of the battery – CT-Multi PTT Bluetooth............................................................. 13 7.1.2 Change of the battery in the CT-Wireless-PTT................................................................ 14 7.2 Connect the CT-MultiPTT Bluetooth to the radio .................................................................... 15 7.2.1 12-pin connector ............................................................................................................. 15 7.3 Switch-on ............................................................................................................................... 16 7.4 Switch-off ............................................................................................................................... 16 7.5 Pairing ................................................................................................................................... 16 7.6 Change operating modes ....................................................................................................... 17 7.7 Telephone mode (mode 1) ..................................................................................................... 17 7.7.1 Accept the call ................................................................................................................ 17 7.7.2 End the call ..................................................................................................................... 17 7.7.3 Reject the call ................................................................................................................. 17 7.7.4 Redial ............................................................................................................................. 17 7.7.5 Abort redialing................................................................................................................. 17 7.8 Telephone mode with MIC switch (mode 2) ........................................................................... 17 7.8.1 Accept the call ................................................................................................................ 18 7.8.2 End the call ..................................................................................................................... 18 7.8.3 Reject the call ................................................................................................................. 18 7.8.4 Redial ............................................................................................................................. 18 7.8.5 Abort redialing................................................................................................................. 18 7.9 Limited telephone mode with MIC switch (mode 3) ................................................................ 18 7.10 Increase the volume............................................................................................................... 18 7.11 Lower the volume .................................................................................................................. 18 7.12 Battery status ......................................................................................................................... 18 7.13 Change the PIN for CT-Multi PTT Bluetooth .......................................................................... 19 7.14 CT-Wireless-PTT (optional) ................................................................................................... 20 7.15 Subscribe the CT-Wireless-PTT to the CT-Multi PTT Bluetooth ............................................. 21 7.16 Delete one CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter......................... 22 7.17 Delete all CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter ........................... 23 Revision: 02/1015 DOK 1643-us 2 of 28 7.18 Switch-on and operation ........................................................................................................ 24 7.18.1 Communication via radio................................................................................................. 24 7.18.2 Communication via cellular phone .................................................................................. 24 7.19 End of operation..................................................................................................................... 25 Safekeeping – storage .................................................................................. 25 8.1 Cleaning ................................................................................................................................ 26 9 Disposal ........................................................................................................ 26 10 Technical data .............................................................................................. 26 11 Brief instruction ............................................................................................. 27 1 Warning - and Safety instructions Notice for the use of the device for prevention of personal injury or property damage the national safety and accident prevention regulations and the following warning and safety instructions in this instruction manual. The following information-, warning- and safety symbols can be used: This symbol indicates important information. This symbol indicates a possibly dangerous situation. Non-observance of the safety instruction could cause damage to property. This symbol indicates a possibly dangerous situation. Non-observance of the safety instruction could cause minor or moderate injuries. This symbol indicates a possibly dangerous situation through electric current. Nonobservance of the safety instruction could cause minor or moderate injuries. This symbol indicates a potential situation of danger. Non-observance of the safety instruction could cause death or extremely severe injuries. This symbol indicates a potential situation of danger through electric current. Nonobservance of the safety instruction could cause death or extremely severe injuries. This symbol indicates imminent danger. Non-observance of the safety instruction could cause death or extremely severe injuries. This symbol indicates imminent danger through electric current. Non-observance of the safety instruction could cause death or extremely severe injuries. All warning and safety symbols may include pictograms, calling the attention clearly to the danger involved. 1.1 General safety instructions Before using CeoTronics products read completely the appropriate operating instructions. If in doubt, ask our technical staff. Keep these operating instructions for later use. If repair work of any kind needs to be done to CeoTronics products, arrange for it to be performed only by the company CeoTronics or by a specialized workshop that is Revision: 02/1015 DOK 1643-us 3 of 28 authorized by CeoTronics. In all other cases, our warranty and liability for the product shall lapse. Keep CeoTronics products out of the reach of children and any other persons who are not familiar with the handling and operation thereof. CeoTronics products may only be used for the specific application envisaged. Product damage! Do not immerse a CeoTronics product into water, if it is not expressly specified for this purpose. Risk of injury! When using CeoTronics products that are equipped with connection leads ensure that the latter do not get caught up in operational machinery or wheels! Road traffic hazard! Do not leave CeoTronics products lying around loose in cars, e.g. on the parcel shelf. Stow these products in a suitable, safe place in the car so that they do not present a danger to you or to other occupants of the car, if emergency braking is effected. When driving a car, do not use the radio because it may distract you from the other traffic. Never use a CeoTronics product (communication set, insert earphone, inductive receiver etc.) that will impair your hearing. Risk of explosion! CeoTronics products that are not intrinsically safe (explosion-proof) and therefore have no special explosion-proof designation must never be operated in potentially explosive environments (e.g. when refuelling cars, aircraft etc.). Devices that are not explosion-proof can unintentionally trigger off explosions in such areas! Revision: 02/1015 DOK 1643-us 4 of 28 Legal note for operation in the USA The receiver of the CT-Multi- PTT should be used in the USA only when it is marked as following: 916,5 MHz Important Notes for operation of the Transmitter in the USA Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2 Abbreviations and Terms PTT Push to Talk – Press and hold the button so long as you want to speak. Switch between receiving and transmitting 3 Scope of delivery 1 x CT-MultiPTT Bluetooth 1 x CT-Wireless PTT (Option) 1 x Operating instructions Dok1643 4 Labeling of the product Name of the product CT-MultiPTT Bluetooth Manufacturer CeoTronics AG Adam-Opel-Str. 6 63322 Rödermark Revision: 02/1015 DOK 1643-us 5 of 28 Figure 1 – Example metal clip Serial number FCC labeling 5 Product description 5.1 Description The CT-Multi PTT Bluetooth (PTT-Push to talk) provides the possibility of cable connection to a radio and to a cellular phone via the integrated Bluetooth interface. The necessary CT communication set (not part of the scope of supply) is plugged into the corresponding socket. With the CT-Multi PTT Bluetooth, most of CeoTronics communication systems with 12-pin connector can be used on all cellular phones, supporting the Bluetooth Standard. The CT-Multi PTT Bluetooth can be equipped with a CT-Wireless-PTT. The CT-Multi PTT Bluetooth provides 128 bit coding. Bluetooth devices should have a distance of maximum 40 cm from each other (could be more, depending on the particular cell phone) and “visual contact” to ensure a secure Bluetooth connection. Revision: 02/1015 DOK 1643-us 6 of 28 Figure 2 Example Wearing method max. 40 cm The CT-Multi PTT Bluetooth complies with the Bluetooth specification 2.1. At some places, there exist restrictions regarding the use of Bluetooth devices. Ask your service provider or the competent authorities. An AA battery or AA storage battery provides the electrical power. For radio operation, the Bluetooth module must be in switched-on state, even if no cellular phone is used. Normally, switch-on is controlled via radio or by keystroke. Revision: 02/1015 DOK 1643-us 7 of 28 Figure 3 Plug for connection to a radio Pasted label with name of device Socket for communication set Battery compartment PTT button Bluetooth control button + storage battery / battery pilot lamp Green, continuous - battery fully charged Green, flashing - battery at half charge Red, flashing - battery almost flat, approx. 30 minutes remaining LED off - device does not switch on, battery/storage battery is flat Volume-up key (in active call – telephone louder) Volume-down key (in active call – telephone softer) CT-Wireless PTT Revision: 02/1015 DOK 1643-us 8 of 28 Figure 4 5.2 Figure 5 Fixation clamp The clamp can be rotated 360 °, infinitely variable. Figure 6 For rotating, loosen the knurled screw Revision: 02/1015 DOK 1643-us 9 of 28 5.3 CT-Multi-PTT Bluetooth with CT-ClipCom Digital The CT-Multi-PTT Bluetooth is also available with integrated CT-ClipCom Digital technology and firmly attached communication set. The following two (2) system configurations are available: CT-ClipCom Digital EarMike consisting of an ear microphone and an additional speaker You hear radio messages and the ringing tone of the cellular phone on both sides. If a PTT transmit button is activated or a conversation takes place via cellular phone, the RH ear microphone is switched over from speaker to microphone operation. This deactivates the reception of exterior noise on that ear microphone. CT-ClipCom Digital BoomMike consisting of one earphone with boom microphone and an additional speaker. While activating a transmit button, the reception of exterior noise continues being active on both sides. The earmike is an electroacoustic transducer working as both, microphone (transmitting) and earphone (receiving), and is worn inside the ear with earplugs or personalized ear molds. Regarding personalized ear molds, follow the instruction manual Dok1463. Figure 7 CT-ClipCom Digital BoomMike Earmike Earphone 5.3.1 EarMike The ear microphone is on the right side, marked in red ink. The earphone is on the left side, marked in blue ink. The ear microphone housing contains, in addition to the ear microphone (Figure 8/c) itself, also the ASR microphone (Figure 8/d) Revision: 02/1015 DOK 1643-us 10 of 28 Figure 8 Earphone on the left side Ear microphone on the right side Ear microphone with earphone ASR microphone 5.3.2 Earphone with BoomMike The earphone with boom microphone is available only for the left ear. Attached to the earphone is the boom microphone with protective cover (Figure 9/c) and the ASR microphone (Figure 9/b). Figure 9 Earphone ASR microphone BoomMike with protective cover Revision: 02/1015 DOK 1643-us 11 of 28 5.3.3 Use with standard ear plug Figure 10 Figure 11 Figure 12 The standard earplug is used for adaptation of the ear microphone / earphone to the auditory canal. It is »pushed« with a rotating motion onto the ear microphone / earphone (Fig.10). If no perfect seat inside the ear is achievable, because the standard earplug is too large, the largest lamella ring can be cut off with a sharp knife (figure 10-12). 6 Preparing the Product for Use 6.1 Receipt of Goods Check incoming goods immediately upon receipt for completeness and/or transport damage! Inform the transport company and CeoTronics AG immediately of any transport damages! Risk of swallowing and choking! Keep packing material, e.g. filler materials und plastic bags, out of the reach of children; they are no toys! Dispose of packing materials environmentally responsible! Revision: 02/1015 DOK 1643-us 12 of 28 7 Operating Instruction 7.1 7.1.1 Change of the battery Change of the battery – CT-Multi PTT Bluetooth Figure 13 1. Open the battery compartment by loosening the knurled screw. 2. Remove and replace the rechargeable battery / battery from the battery compartment. When inserting observe polarity. 3. Fix the cover of battery compartment again at the PTT-button. Revision: 02/1015 DOK 1643-us 13 of 28 Figure 14 7.1.2 Change of the battery in the CT-Wireless-PTT 1. Open the battery compartment at the back of Figure 15 the CT-Wireless-PTT with help of the special tool by short turn to left. 2. Remove the circuit board careful from the housing. Change the battery and pay attention to the correct position; the lettering must be visible. Use only the 3 V batteries type CR2032. Figure 16 Circuit board Pay attention to the correct polarity. Touch-lamina Do not throw used (defective) storage batteries into the domestic refuse. Figure 17 3. When closing the CT-Wireless-PTT insert, if needed, a new gasket under the cover edge. Put the hooks of the cover in the rail of the housing and close the cover with a twist to the right. Pay attention that the cover fits tight with the housing. Revision: 02/1015 DOK 1643-us 14 of 28 Sealing ring Lid 7.2 Connect the CT-MultiPTT Bluetooth to the radio 7.2.1 12-pin connector Damage to connectors, sockets and/or cables Observe the following instructions when handling plug-in connections. Normally, the 12-pin connector is used in combination with radio adapters. For it, the adapter is attached to the radio and the 12-pin connector itself plugged into the radio adapter. Turn the radio off, if it is turned-on. Plug the 12-pin connector into the radio adapter. To do so, grab the connector behind the grooved sliding collar and put it on the socket. Rotate the connector cautiously on the socket until it starts sliding into it (Figure 18). Now, push the connector into the socket until the sliding collar snaps into place in direction of the arrow, locking the connector. To unlock the plug-in connection, grab the connector at the grooved sliding collar only and pull the connector cautiously out of the socket (Figure 19). Figure 19 - Unlocking Figure 18 - Locking Sliding collar Revision: 02/1015 DOK 1643-us 15 of 28 Figure 20 7.3 Switch-on Press simultaneously Bluetooth key and volumeup key until you hear an ascending three-tone sequence in the CT communication set. Then let the buttons go. The LED in the Bluetooth key indicates the condition of the battery/storage battery. Should the LED not illuminate continuous green since the first second of switch-on, then the battery or storage battery is flat, and has to be replaced. Operation is not possible. 7.4 Bluetooth key Switch-off Volume-up key Press simultaneously Bluetooth key and volumeup key for about three (3) seconds until you hear a descending three-tone sequence. The LED in the Bluetooth key goes out. Let the buttons go. Figure 21 7.5 Pairing Pairing of only one Bluetooth device at a time is possible with a CT-Multi PTT Bluetooth. When repeating the pairing, the existing connection is lost. 1. Switch the CT-Multi PTT Bluetooth off. 2. Activate the Bluetooth function of your Bluetooth device (cellular phone or digital radio). 3. Press simultaneously for about 8 seconds the Bluetooth and volume-up keys on the CTMulti PTT Bluetooth until you hear a descending five-tone sequence (approx. 8 seconds). In between, you hear an ascending three-tone sequence, confirming the switch-on process. 4. Let the keys go. You hear a beep in 2-second intervals. The CT-Multi PTT Bluetooth is in search mode. 5. Bluetoothkey Volume-up key Put the other Bluetooth device (cellular phone or digital radio) into Bluetooth search mode. For it, follow the operating instruction of the device manufacturer. 6. When the Bluetooth device to be paired announces a search result with the name of the CT-Multi PTT Bluetooth, confirm the pairing by entering the following PIN number in the device: 83787432 You find the name of the CT-Multi PTT Bluetooth on the label pasted on the cable (Figure 3). 7. After successful pairing, you hear an ascending five-tone sequence in the CT communication set. Once paired, both devices re-establish the Bluetooth connection, even after interruptions, within the possible Bluetooth range. Revision: 02/1015 DOK 1643-us 16 of 28 Figure 22 7.6 Change operating modes You may switch between telephone mode (mode 1), telephone mode with MIC-switch (mode 2), and limited telephone mode with MIC-switch (mode 3). For it, proceed as follows The modes are signalized by the following beeps: Mode 1- 1 beep cellular phone mode Mode 2- 2 beeps cellular phone mode with MIC-switch Mode 3- 3 beeps limited cellular phone mode with MIC-switch 1. Press on the CT-Multi PTT Bluetooth simultaneously, for at least 2 seconds, the volume-down and volume-up keys until you hear the actual audio signal. 2. Then, quickly press both keys briefly once again for changing the mode. The change itself is acknowledged by the audio signals indicated above. 7.7 Volume-up key Volume -down key Telephone mode (mode 1) The telephone mode provides the traditional telephone functionality. Simultaneous hearing and speaking is possible without pressing an extra button. In telephone mode, the Bluetooth key serves for the functions: Accept the call End the call Reject the call Redial Abort redialing. The CT-Wireless-PTT can be used in lieu of the Bluetooth key; it has equal function. 7.7.1 Accept the call You hear the ringing tone of incoming calls in the CT communication set. To accept the call, press briefly the Bluetooth key. 7.7.2 End the call To end a communication, press briefly the Bluetooth key. 7.7.3 Reject the call You hear the ringing tone of incoming calls in the CT communication set. To reject the call, press the Bluetooth key until you hear a double beep (approx. 2 seconds). The call is rejected. 7.7.4 Redial Press the Bluetooth key briefly two (2) times in order to redial the phone number dialed last from your cellular phone. 7.7.5 Abort redialing When you hear the ringing tone in the CT communication set, press the Bluetooth key to abort redialing. 7.8 Telephone mode with MIC switch (mode 2) The telephone mode with MIC switch provides limited telephone functionality. You can hear without pressing an extra button. For speaking, you must press the Bluetooth key in order to switch on the Revision: 02/1015 DOK 1643-us 17 of 28 microphone. The microphone remains switched-on as long as the key is pressed. In the event the existing phone call has been interrupted intentionally or unintentionally, you hear in the CT communication set two times a descending sequence of tones. In the telephone mode with MIC switch, the Bluetooth key serves the following functions: Accept the call End the call Reject the call Redial Abort redialing You can use the CT-Wireless-PTT in lieu of the Bluetooth key; it has equal function. 7.8.1 Accept the call You hear the ringing tone of incoming calls in the CT communication set. To accept the call, press briefly the Bluetooth key 7.8.2 End the call In an existing telephone conversation, press briefly the Bluetooth key immediately and consecutively 4 times to end the conversation. You will hear two (2) times a descending sequence of tones. 7.8.3 Reject the call You hear the ringing tone of incoming calls in the CT communication set. To reject the call, press the Bluetooth key until you hear a double beep (approx. 2 seconds). The call is rejected. 7.8.4 Redial Press the Bluetooth key briefly two (2) times in order to redial the phone number, dialed last from your cellular phone. 7.8.5 Abort redialing When you hear the ringing tone in the CT communication set, press the Bluetooth key to abort redialing. 7.9 Limited telephone mode with MIC switch (mode 3) The limited telephone mode with MIC switch provides limited telephone functionality. You can hear without the need of pressing an extra button. For speaking, you must press the Bluetooth key in order to switch the microphone on. The microphone remains switched on as long as the key is held down. All other functions, available in mode 2, have to be performed on the cellular phone or you must switch to another telephone mode. 7.10 Increase the volume Press briefly the volume-up key to increase gradually the volume in the CT communication set. One high beep acknowledges each step up. When reaching maximum volume, you hear a double beep. 7.11 Lower the volume Press briefly the volume-down key to reduce gradually the volume in the CT communication set. One low beep acknowledges each step down. When reaching minimum volume, you hear a double beep. 7.12 Battery status The LED in the Bluetooth key indicates the status of the battery. The display lights up only for the first 15 seconds after switching the CT-Multi PTT Bluetooth on. Afterwards, you can display the battery status for 15 seconds by briefly pressing the volume-up or volume-down keys. LED glows green: fully charged Revision: 02/1015 DOK 1643-us 18 of 28 LED flashes green: LED flashes red: at half charge very low – replace You hear in the CT communication set three (3) low beeps in 30-second intervals Undser heavy load and high volume and depending on the battery/storage battery status the communication may result in a distortion-like audio impression. This is normal and prevents system crashes / malfunctions if a battery / storage battery does not provide enough power anymore. An acoustic warning signal advises if the battery / storage battery is almost flat. Remedy: Reduce slightly the volume or change the battery / storage battery. The button does not disconnect if the battery/storage battery is dead, in order to enable the user to communicate even in critical situations where a battery change is not possible. 7.13 Change the PIN for CT-Multi PTT Bluetooth Store the newly set PIN in a safe place. In case the new PIN is lost, reprogramming is possible by CeoTronics, only. Figure 23 The PIN of the CT-Multi PTT Bluetooth is 83787432 in the state as delivered from factory. To change the PIN start the program “CT-BluetoothUtillity” on your personal computer. Follow the instruction manual Dok1345 “CT-BluetoothUtillity”. Put the CT-Multi PTT Bluetooth in programming mode. For it, press simultaneously the Bluetooth and volumedown keys and keep both pressed for at least 8 seconds, until you hear a four (4) tone sequence in your CT communication set, and the LED in the Bluetooth key glows red. After a few seconds your can hear a readiness beep – now you can establish a connection to the personal computer. Follow the instructions of the PC program. To abort programming on the CT-Multi PTT Bluetooth or to end the process after successful change, press briefly the volume-up key. The LED in the Bluetooth key goes out and you hear a descending three-tone sequence. Revision: 02/1015 DOK 1643-us 19 of 28 Bluetoothkey Volume-down key 7.14 CT-Wireless-PTT (optional) For interference-free operation of the CT-Wireless-PTT receiver in the CT-Multi PTT Bluetooth, take care that the CT-Multi PTT Bluetooth is not located in close proximity to the transmitting antenna of a radio or cellular phone. Heterodyning the CT-Wireless-PTT radio signal by the comparatively strong transmit signal of a radio or cellular phone can compromise the sensitivity of the CT-Wireless-PTT receiver in the near field of the transmit antenna. This could interrupt the radio transmission from the sending to the receiving PTT. The CT-Wireless-PTT and the Bluetooth key of the CT-Multi PTT Bluetooth have equal function. The CT-Wireless-PTT necessarily requires subscription to the CT-Multi PTT Bluetooth. A battery supplies electric power to the CT-Wireless-PTT. For safety reasons, continuous keying of the CT-Wireless-PTT is limited to 30 seconds. Figure 24 a LED glows when PTT button is pressed b PTT button (of CT-Wireless-PTT MIL Revision: 02/1015 DOK 1643-us - C1 Bluetooth - C2 PTT radio Observe the instruction manual Dok1652) 20 of 28 7.15 Subscribe the CT-Wireless-PTT to the CT-Multi PTT Bluetooth Figure 25 1. Switch the CT-Multi PTT Bluetooth off, if it is on. 2. Press all three (3) lateral keys of the CT-Multi PTT Bluetooth simultaneously until the LED of the Bluetooth button starts flashing three (3) times red-green. The LED keeps flashing redgreen until you let the keys go, however minimum three times. 3. Press the Bluetooth key three (3) times until the LED flashes as follows: ….red-red-red…..red-red-red….red-red-red…. 4. Press briefly the CT-Wireless-PTT (the red LED glows); simultaneously and as confirmation the LED in the Bluetooth key lights up red for about four seconds; now, the CT Wireless-PTT is subscribed. 5. Press now one time the Bluetooth key of the CT-Multi PTT Bluetooth. The LED does not glow anymore. Now you can change to operating mode (6.) or apply (3. and ff.) of 7.15 / 7.16 / 7.17. 6. Change to the operating mode of the CT-Multi PTT Bluetooth by pressing for at least one (1) second both, the Volume-up” and “Volumedown” keys – like changing operating modes. Bluetoothkey Volume-up key Volume-down key In case the CT-Multi PTT Bluetooth is in programming mode, all other functions are disconnected. In order to exit programming mode and enter operating mode, press for at least one (1) second both keys, “Volume-up” and “Volume-down”. We recommend, after the loss of a CT-Wireless-PTT, to delete it from the receiver. For it, it is necessary to delete all CT-Wireless-PTT from the CT-Multi PTT Bluetooth (see 7.17), and to re-subscribe the existing ones. The CT-Multi PTT Bluetooth accepts the subscription of maximum 32 CTWireless-PTT devices. Revision: 02/1015 DOK 1643-us 21 of 28 7.16 Delete one CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter Figure 26 1. Switch the CT-Multi PTT Bluetooth off, if it is on. 2. Press all three (3) lateral buttons of the CT-Multi PTT Bluetooth simultaneously until the LED in the Bluetooth button starts flashing three (3) times redgreen. The LED keeps flashing red-green until you let the buttons go, however minimum three times. 3. Press the Bluetooth key of the CT-Multi PTT Bluetooth and hold it down for at least two (2) seconds. Now the deletion mode is active. - in deletion mode the LED flashes very quickly To abort deletion mode, press the Bluetooth key briefly once again. 4. Now, press the PTT button of the CT-Wireless-PTT you want to delete and hold it down until the LED starts glowing for four (4) seconds. This deletes the transmitter code. 5. Then, press the Bluetooth key of the CT-Multi PTT Bluetooth one time. The LED is not glowing anymore. Now you can change to operating mode (6.) or apply (3. and ff.) of 7.15 / 7.16 / 7.17. 6. Change to operating mode of the CT-Multi PTT Bluetooth by pressing for at least one (1) second both, the Volume-up” and “Volume-down” keys - like changing operating modes. Revision: 02/1015 DOK 1643-us 22 of 28 Bluetoothkey Volume-up key Volume-down key 7.17 Delete all CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter Figure 27 1. Switch the CT-Multi PTT Bluetooth off, if it is on. 2. Press all three (3) lateral keys of the CT-Multi PTT Bluetooth simultaneously until the LED in the Bluetooth button starts flashing three (3) times redgreen. The LED keeps flashing red-green until you let the buttons go, however minimum three times. 3. Press the Bluetooth key of the CT-Multi PTT Bluetooth and hold it down for at least two (2) seconds. Now the deletion mode is active. - in deletion mode the LED flashes very quickly To abort the deletion mode, press the Bluetooth key briefly once again. 4. Now, press the Bluetooth key again for more than two (2) seconds. If the LED glows four (4) seconds, all transmitter codes are deleted. 5. Then, press the Bluetooth key of the CT-Multi PTT Bluetooth one time. The LED is not glowing anymore. Now you can change to operating mode (6.) or apply (3. and ff.) of 7.15 / 7.16 / 7.17. 6. Change to operating mode of the CT-Multi PTT Bluetooth by pressing for at least one (1) second both, the Volume-up” and “Volume-down” keys – like changing operating modes. Revision: 02/1015 DOK 1643-us 23 of 28 Bluetooth key Volume-up key Volume-down key 7.18 Switch-on and operation Risk of hearing impairment For safety reasons reception volumes in excess of 85 dB(A) are possible with a whole series of CeoTronics products. However, the user can regulate the volumes. After switching on the communication system, set the reception volume to approx. 1/2 the available loudness volume and then test the audible volume, e.g. by opening the squelch on the radio set. Do not set the volume any higher than is necessary. A very high volume setting can lead to damaged hearing, particularly if it is continuous. For higher volumes or noise levels wear additional earplugs. If in doubt, ask your safety officer or company doctor. Turn the radio on, observing the manufacturer’s instruction manual. When turning the CT-MultiPTT Bluetooth on, the LED in the Bluetooth button lights up green for about four (4) seconds (battery test). After that, the battery / storage battery status is displayed. Should the LED not glow continuous green during the first seconds, then the battery or storage battery is flat and requires replacement. Operation is not possible. At turn-on, the volume of the CT-MultiPTT is always set to medium. Now you can hear the incoming radio messages in your communication set. 7.18.1 Communication via radio The PTT serves the purpose of switching the radio between transmitting and receiving. For transmitting, you must press the PTT button while speaking. If the communication set is equipped with a PTT button, then this one and the PTT of the CT-MultiPTT Bluetooth have equal function. If there exists an active telephone communication, voice to telephone is deactivated while transmitting. Hearing the telephone is possible. When you let the button go, you return to standby/receiving mode. Adjust the volume Adjust the desired reception volume using the “Volume-up” and Volume-down” keys. It is not possible, to completely down-regulate the volume. A minimum level persists. In a telephone conversation via Bluetooth (cellular phone), adjustment of the reception volume takes effect on the Bluetooth connection. 7.18.2 Communication via cellular phone Switch on the cellular phone and set it to mute. (Observe the instruction manual of your cellular phone) Now, you are ready for communication via radio or cellular phone. Switch on the Bluetooth module You are able to communicate via cellular phone, even if on the CT-Multi PTT Bluetooth the radio is neither active nor connected. Press simultaneously both, the Bluetooth and “Volume-up” keys, until you hear an ascending three-tone sequence in the CT communication set. When switching on the CTMultiPTT Bluetooth the LED in the Bluetooth button lights up green for about four (4) seconds (battery test). Should the LED not glow continuous green during the first seconds, then the battery or storage battery is flat and needs replacement. Operation is not possible. Afterwards, the LED indicates the battery / storage battery status for the first 15 seconds. Green, continuous - battery fully charged Green, flashing - battery at half charge Red, flashing - battery almost flat, approx. 30 minutes remaining LED off - device does not switch on; battery/storage battery is flat. After 15 seconds, the LED goes out. Revision: 02/1015 DOK 1643-us 24 of 28 Should the radio be turned off (battery change) while the Bluetooth module is on, you hear in the communication set for 30 seconds an acoustic warning signal in two (2) second intervals. During these 30 seconds press a key or turn the radio on, to ensure the Bluetooth module continues in switched-on condition. This way it is possible to keep up telephone standby. Switch off the Bluetooth module Turning the radio off, switches the Bluetooth module off as well, with a delay of 30 seconds. However, you are also able to disconnect the entire system, independently from the radio. Press simultaneously both, the Bluetooth and Volume-up keys, for about 3 seconds until you hear a descending three-tone sequence in the communication set which confirms the switch-off. The LED in the Bluetooth key does not glow anymore. Let the keys go. 7.19 End of operation To end the operation, turn the radio off. In some radios, the accessory interface continues energized, even after turning the radio off. In such a case switch the key off manually, or disconnect the CTMultiPTT Bluetooth plug from the radio adapter. Otherwise, it is possible that the CTMultiPTT Bluetooth storage battery is discharging. 8 Safekeeping – storage Store the cleaned devices in a clean, dry place at normal room temperature and in normal relative air humidity. Product damage! Do not store CeoTronics products outside or in damp ambient conditions. At all times keep them clean, dry and at normal air humidity. CeoTronics products must not be stored in areas with a temperature of over +80° C (+176° F), e.g. in the summertime on the parcel shelf of a car. If not stated otherwise, the following temperature ranges are admissible for CeoTronics products: -10 to +55°C for operation, storage -40 to +80°C. Revision: 02/1015 DOK 1643-us 25 of 28 8.1 Cleaning Product damage! Pay attention that no humidity could penetrate into the device during cleaning. Do not use solvents (e.g. benzene, alcohol, etc.) for cleaning! Safe operation requires clean devices. Ensure that the devices (microphones, connectors etc.) are clean and in good condition at all times. Remove loose dust with a soft brush. Clean the outside of components, if necessary, with an appropriate clean cloth, only lightly moistened with clear water, and then rub it down thoroughly. If heavily soiled, a few drops of rinsing agent may be added. Clean the connector pins with a commercial cleaning agent. 9 Disposal Should equipment, supplied by CeoTronics, be definitely put out of service you may return it to CeoTronics. We ensure recycling and/or disposal of outdated equipment in compliance with the applicable environment protection law. 10 Technical data Electrical values min typical max unit Supply voltage 1.1 1.25 1.6 Accessory speaker 16 Ohm Induction coil Type „B“ Mechanical values Specifications without plugs and cable sleeves LxWxH [mm] Housing 54 x 88 x 84 Housing with cable 54 x 88 x 700 Revision: 02/1015 DOK 1643-us 26 of 28 Weight [g] 270g Revision: 02/1015 DOK 1643-us Brief keying Lautstärke verringern Hold 2 seconds Display operating mode Brief keying Hold 2 seconds Activate wireless configuration Lautstärke erhöhen Hold 3 seconds Abort pairing mode Hold 2 seconds, brief keying Hold 8 seconds Activate pairing mode Change operating mode Hold 3 seconds Switch off Keying duration Hold 3 seconds Key combination Switch on Function Sound signal Descending 3-tone sequence On Off Executable in condition 27 of 28 LED active, Color acc. to battery status LED active, Color acc. to battery status None None LED glows red / green LED poes out Off Pairing mode Low beep Double beep at minimum volume On 1 beep = Cellular phone On 2 beeps = Cellular phone with MIC switch 3 beeps = limited mode cellular phone with MIC switch 1 beep = Cellular phone Operating mode 2 beeps = Cellular phone with MIC switch display 3 beeps = limited mode cellular phone with MIC switch High beep On Double tone at maximum volume None Descending 3-tone sequence LED displays the battery status Ascending 3-tone sequence after 3 sec., Off descending 5-tone sequence after 8 sec., for 15 seconds brief search beep every 2 seconds None LED displays the battery status Ascending 3-tone sequence for 15 seconds Visual signaling 11 Brief instruction Deutschland und Internationaler Vertrieb CeoTronics AG Adam-Opel-Str. 6 63322 Rödermark Tel. +49 6074 8751-0 Fax +49 6074 8751-676 E-Mail verkauf@ceotronics.com USA/Kanada/Mexico CeoTronics, Inc. 512 South Lynnhaven Road, Suite 104 Virginia Beach, Virginia 23452 Tel. +1 757 549-6220 Fax +1 757 549-6240 E-Mail sales@ceotronicsusa.com Spanien CeoTronics S.L. C/Ciudad de Frias 7 y 9 Nave 19 28021 Madrid Tel. +34 91 4608250 51 Fax +34 91 4603193 E-Mail ventas@ceotronics.es Deutschland und Internationaler Vertrieb CT-Video GmbH Gewerbegebiet Rothenschirmbach 9 06295 Lutherstadt Eisleben Tel. +49 34776 6149-0 Fax +49 34776 6149-11 E-Mail ctv.info@ceotronics.com Revision: 02/1015 DOK 1643-us Subject to change Copyright © 01/2014 CeoTronics AG, 63322 Rödermark, Germany, Internet www.ceotronics.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Author : Jürgen Heilmann Create Date : 2015:10:14 09:46:07+02:00 Modify Date : 2015:10:14 09:46:26+02:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:10:14 09:46:26+02:00 Creator Tool : Acrobat PDFMaker 10.1 für Word Document ID : uuid:93ccbc91-6480-4e17-b014-f575358618e9 Instance ID : uuid:d3efc113-2f0f-43df-bfc4-b1ddc194f775 Subject : 11 Format : application/pdf Title : Handmikrofon SM 3 mit integriertem Lautsprecher Creator : Jürgen Heilmann Producer : Adobe PDF Library 10.0 Source Modified : D:20151014074519 Company : Ceotronics AG Page Layout : OneColumn Page Count : 28EXIF Metadata provided by EXIF.tools