| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 606638 |
| Application ID | VIzJwfc8/sjBkLB3GBF1Ig== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.06kB (238285 bits) |
| Date Submitted | 2005-11-29 00:00:00 |
| Date Available | 2005-11-28 00:00:00 |
| Creation Date | 2005-11-17 16:01:08 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2005-11-17 16:12:38 |
| Document Title | Source Tagging Tester User Guide.book |
| Document Creator | FrameMaker 7.1 |
| Document Author: | reevesm |
.....
Source Tagging
Tester
...................................
User Guide
Version 1.0
P/N 7413286
Published by:
Checkpoint Systems Inc.
101 Wolf Drive
Thorofare, NJ 08086
This manual refers to the Source Tagging Tester unit, Version 1.0.
Document revision information
Source Tagging Tester
Part Number: 7413286
Rev
Description
Date
Author
1.0
Initial Draft
11/10/2005
M. Reeves
Trademarks Copyright and Warranty Information
Checkpoint Systems, Inc. are registered trademarks of Checkpoint Systems, Inc.
Microsoft, Windows, and Windows XP are either registered trademarks or trademarks of Microsoft
Corporation in the United States
Other product and company names herein may be trademarks of their respective owners.
The information in this manual is subject to change without notice.
Because of the changing nature of this product information presented in the Installation Manual,
Checkpoint Systems, Inc. is not liable for any omissions, misstatements, or other errors of
information.
The information presented in the Installation Manual may not be copied, used or disclosed to others
for the purpose of procurement or manufacturing without the written permission of Checkpoint
Systems, Inc. This manual and the products discussed in this manual are the exclusive property of
Checkpoint Systems Inc. Copyright laws of the United States protect all information and products.
Copyright © 2005 by Checkpoint Systems, Inc. All rights reserved.
ii
Contact Information
USA
Checkpoint Systems, Inc.
101 Wolf Drive
Thorofare, NJ 08086 USA
http://www.checkpt.com
Technical Assistance/Service Requests: 800-253-7580
FAX: 856-384-2328
Europe
Checkpoint Systems International GmbH
Von-Humboldt-Strasse 10
Heppenheim
Hessen
64 646
Germany
+49 6252 798 300
Document Conventions
Warning
This is a Warning icon. When it appears, the corresponding text indicates a cautionary statement
which you must abide by.
Caution
This is a Caution icon. When it appears, the corresponding text indicates a cautionary statement
which you must abide by.
Note
This is a Tip icon. When it appears, the corresponding text indicates a helpful note or tip when using
the feature.
The following usage conventions are used throughout the manual.
Button Name - This describes a button or selection on the screen. For example, the
button is represented in this document as Done.
Key Name - This describes a keystroke on a keyboard. For example Ctrl represents the
control key.
iii S o u r c e T a g g i n g T e s t e r U s e r G u i d e
Regulatory Statement
Important Information to our Users in North America
FCC Regulatory Compliance Statement
Checkpoint Systems, Inc. offers certain Electronic Article Surveillance (EAS) products that have been FCC
certified or verified to 47 CFR Part 15, Subparts B/C and/or 47 CFR Part 18. Appropriately, one of the
following labels will apply to the approval:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
- OR This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
- OR NOTE: This equipment has been tested and found to comply with the limits for a miscellaneous type ISM
device, pursuant to part 18 of the FCC Rules. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio communications
reception, which can be determined by turning the equipment off and on, please contact Checkpoint
Systems, Inc. at (800) 257-5540 for further assistance.
Equipment Safety Compliance Statement
WARNING: Changes or modifications to Checkpoint’s EAS equipment not expressly approved by the
party responsible for assuring compliance could void the user’s authority to operate the equipment in a safe
or otherwise regulatory compliant manner.
iv
Important Information to our Users in Europe
CE Compliance Statement
Where applicable, Checkpoint Systems, Inc. offers certain Electronic Article Surveillance (EAS) products
that have CE Declarations of Conformity to Council Directive(s) EMC 89/336/EEC, LVD 73/23/EEC, and
R&TTE 99/5/EC Radio and Telecommunications Terminal Equipment, as amended by 92/31/EEC and 93/
68/EEC.
System Electromagnetic Compatibility (EMC), has been tested and notified through Spectrum Management
Authorities using accredited laboratories and, in a few cases, EC type examination certified through a
Notified Body using Competent Body laboratories in Europe, whereby, conformity is declared to voluntary
accepted European Telecommunications Standards Institute (ETSI) standards EN 301 489 and EN 300 330.
In other cases, conformity is declared to the generic emission and immunity standards EN 50081-1 / EN
55022 / EN 50082-1 and EN 55024.
NOTE: Certain Checkpoint EAS equipment has been tested and found to conform with the CE emission and
immunity requirements in Europe. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Under unusual circumstances, interference from external sources may temporarily
degrade the system performance. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment experiences frequent interference from external sources or does
cause harmful interference to radio communications reception, which can be determined by turning the
equipment off and on, please contact a Checkpoint representative for further assistance.
Equipment Safety Compliance Statement
Checkpoint’s Electronic Article Surveillance (EAS) products have been designed for safeness during
normal use and, where applicable, certain components of the system or accessory sub-assemblies have been
declared safe according to the European Low Voltage Directive (LVD) by being certified, listed, or
recognized in accordance with one or more of the following European safety standards; EN 60950-1
(Amendments 1 & 2), EN60742, and EN50364. Additional approvals may be pending.
WARNING: Changes or modifications to Checkpoint’s EAS equipment not expressly approved by the
party responsible for assuring compliance could void the user’s authority to operate the equipment in a safe
or otherwise regulatory compliant manner.
v Source Tagging Tester User Guide
Table of Contents
Contact Information............................................................................................................................................ i-iii
Document Conventions...................................................................................................................................... i-iii
Regulatory Statement......................................................................................................................................... i-iv
Introduction..............................................................................................................................................1-1
Sample Layout Diagram....................................................................................................................... 1-2
Using Source Tagging Tester.................................................................................................................2-3
Initial Configuration of STT Software.................................................................................................... 2-3
Tag Testing Line Preparation................................................................................................................ 2-6
Fixed Tag Testing Amount................................................................................................................................. 2-6
Unlimited Tag Testing Amount........................................................................................................................... 2-7
Reports......................................................................................................................................................3-9
Report Procedure ................................................................................................................................. 3-9
Create a Report ................................................................................................................................................ 3-9
Email the Report ............................................................................................................................................................... 3-10
Print the Report..................................................................................................................................................................3-11
Sample Report ................................................................................................................................... 3-12
vi
CHAPTER
INTRODUCTION
CHAPTER0
The Checkpoint Source Tagging Tester is designed to help Source Tagging Customers test
and verify Checkpoint labels in real time. The Source Tagging Tester tests every series of
Checkpoint labels and comes equipped with a counter mechanism that records the number
of good, bad, and total Checkpoint labels run on the production line.
The customer records the number of good, bad, and total number of Checkpoint labels
before resetting the counters. Each individual counter comes equipped with a manual hard
reset button, enabling the customer to reset the counters.
This user guide contains the following information:
• Introduction
• Configuring and Using the Source Tagging Tester
• Report Generation
Introduction:
1-1
Sample Layout Diagram
The following diagram illustrates a sample installation of the Source Tagging Tester. Your
installation is entirely custom and dependent upon your individual requirements.
Source Tagging Tester
Antenna
Photo Eye
Figure 1.1 Sample Layout
1-2
Source Tagging Tester User Guide
CHAPTER
USING SOURCE TAGGING TESTER
CHAPTER0
This chapter instructs how to use the Source Tagging Tester software.
Initial Configuration of STT Software
Before testing starts, the software must be configured for use.
1 Launch the Source Tagging Tester by double-clicking the Tag Tester icon on the
desktop.
2 Click File > User Preferences to access the User Preferences.
Figure 2.1 User Preferences
U s i n g S o u r c e T a g g i n g T e s t e r : I n i t i a l C o n f i g u r a t i o n o f S T T S o f t w a r e 2-3
3 If not using email, the SMTP and Email fields can be ignored. Type in the following
information to customize the software for the production line:
Table 2.1
User Preferences
Field
Description
Time Format
Date Format
No. of Units
SMTP Host
Select either Standard or Military time.
Select the type of date format.
Select the number of production lines to be monitored.
If necessary, enter the SMTP Host information. Contact IT for the
information.
If necessary, enter the SMTP Port information. Contact IT for the
information.
If necessary, type the email address to which the program sends
results.
Select the time for each shift. You cannot leave more than a 10
minute interval between each shift.
Type the number of tags that are to be tested for each run. Once the
count has reached the limit specified here, the program stops
counting.
SMTP Port
Email Address
Shifts
Target Tag Count
4 Once complete, click Save and Exit to save the information. Otherwise, click Exit to
exit without saving your changes.
5 Next, click File > Yield Settings to access Yield Settings.
Figure 2.2 Yield Settings
2-4
Source Tagging Tester User Guide
The yield is the amount of good tags you wish to achieve for each line and each roll.
For example, in Unit 1 above, the program is set for 95% yield, which only allows for
5% of tags to fail.
6 Type the yield you wish to maintain for each unit you are programming. If not using all
units (as programmed in step 3), leave the default value in the field.
7 In the Overall field, type the final successful yield for all of the units.
8 Once complete, click Save and Exit to save the information. Otherwise, click Exit to
exit without saving your changes.
9 Next, click File > Yield COM Setup to access COM Port Setup.
Figure 2.3 COM Port Setup
Note:
Multiple COM Ports refers to the usage of an RS232/COM port expansion unit.
10 Select only the COM ports you will use for tag testing. Otherwise, leave the
checkboxes blank. The COM ports must be selected sequentially and COM1 must
always be selected, as that is the computer itself. COM2-COM8 refers to the COM port
hub.
11 Once complete, click Save and Exit to save the information. Otherwise, click Exit to
exit without saving your changes.
U s i n g S o u r c e T a g g i n g T e s t e r : I n i t i a l C o n f i g u r a t i o n o f S T T S o f t w a r e 2-5
Tag Testing Line Preparation
This procedure assumes that all the initial configuration of the software has been
completed. If not, see “Initial Configuration of STT Software” on page 2-3 for details.
Before configuring the software, the tags must be ready to be run on the production line.
Follow your company’s procedures for the correct installation method.
Fixed Tag Testing Amount
This procedure explains how to configure the STT program for a finite amount of tags.
Choose this option when testing a set number of tags for a particular product code, for
example 1,000 tags for a line of shirts. If you are testing an unlimited amount of tags, see
“Unlimited Tag Testing Amount” on page 2-7.
1 Launch the Source Tagging Tester by double-clicking the Tag Tester icon on the
desktop.
2 If you need to customize the Yield, see page 2-4 for details on how to adjust the
settings.
3 Click Shift. The Shift window displays.
Figure 2.4 Shift Window
The Shift window allows you to customize each production line to match the name of
the operator and the Product Code of the labels. The Shift # is automatically
determined based on the User Preference and the computer’s clock.
4 Type the Production Date to be run.
5 For each Unit you are testing, type the name of the operator of the line and the
applicable Product Code.
2-6
Source Tagging Tester User Guide
6 If necessary, type the name of the Shift Manager for the Overall Shift.
7 Click Prod. The Production window displays.
Figure 2.5 Production Window
The Production window allows you to enter a preset amount of labels to test. The
numbers that appear here can appear in the Final Report.
8 Type the Start and Finish dates.
9 Type the total amount of labels for all units to be tested in the Target No. of Labels
field.
10 For each line to be tested, type the Product Code for each Unit.
11 Click Start to begin testing.
12 Start the tag testing line. The STT program counts the tags for each Unit selected.
13 When the counting is complete, click Stop. See “Create a Report” on page 3-9 for
details on how to save the information.
Unlimited Tag Testing Amount
This procedure explains how to configure the STT program for an unlimited amount of
tags. Choose this option testing many rolls of tags. If you are testing a limited amount of
tags, see “Fixed Tag Testing Amount” on page 2-6.
1 Launch the Source Tagging Tester by double-clicking the Tag Tester icon on the
desktop.
2 If you need to customize the Yield, see page 2-4 for details on how to adjust the
settings.
U s i n g S o u r c e T a g g i n g T e s t e r : T a g T e s t i n g L i n e P r e p a r a t i o n 2-7
3 Click Shift. The Shift window displays.
Figure 2.6 Shift Window
The Shift window allows you to customize each production line to match the name of
the operator and the Product Code of the labels. Only those COM ports you selected in
“Initial Configuration of STT Software” on page 2-3 will appear here. The Shift # is
automatically determined based on the User Preference and the computer’s clock.
4 Type the Production Date to be run.
5 For each Unit you are testing, type the name of the operator of the line and the
applicable Product Code.
6 If necessary, type the name of the Shift Manager for the Overall Shift.
7 Click Start to begin testing.
8 Start the tag production line. The STT program counts the tags for each Unit selected.
9 When the counting is complete, click Stop. See “Create a Report” on page 3-9 for
details on how to save the information.
2-8
Source Tagging Tester User Guide
CHAPTER
REPORTS
CHAPTER0
This chapter provides a sample Report which can be used to record tag counts.
Report Procedure
Prior to running each roll of tags, record the number of bad tags per roll, which can be
found on the inside of the tag core. Then at the end of each roll of tags record the number
of good, bad, and total tags run.
Create a Report
You can archive your testing data in either print or electronic format.
1 From the Production screen, select only those Units (by selecting Final Report) whose
numbers you want to appear in the Report.
Figure 3.1 Final Report Selected
This can be changed as needed as well. For example, if you ran all 8 units with two
different types of tags, you can produce one report for units 1, 2, 3, and 4 and another
for report for units 5, 6, 7, and 8. When you produce the Report, you can select either
group as needed.
R e p o r t s : R e p o r t P r o c e d u r e 3-9
2 After testing is complete, click Report.
Figure 3.2 Report Window
3 Type in the information necessary for your report. The last four fields are
automatically filled with the results from the Production page.
4 Click either Print or Email, depending upon how you want to save the information.
See “Email the Report” on page 3-10 or “Print the Report” on page 3-11 for details.
Email the Report
This option requires that the email settings in User Preferences (configured on page 2-3)
are correctly configured before you can use this option.
1 If you clicked Email, the Email Recipients dialog box appears.
Figure 3.3 Email Dialog Box
2 Type in the necessary email address and click Email. The report is delivered to the
email address specified.
3-10
Source Tagging Tester User Guide
Print the Report
1 If you clicked Print, a sample of the Report displays.
Figure 3.4 Report Sample
2 At the top left, click either the Print
or Export
button.
3 If you clicked Print, the Report is sent to the printer.
4 If you clicked Export, the Export dialog box appears.
Figure 3.5 Export Dialog Box
5 Select a destination for the file, type a file name, and select the file type (HTML or
TXT) for the Report and click Save.
R e p o r t s : R e p o r t P r o c e d u r e 3-11
Sample Report
You can use this sample report to record your results if desired.
Table 3.1
Roll #
3-12
Checkpoint Source Tagging Tester Report
Factory Bad Labels
Bad Production
Labels
Source Tagging Tester User Guide
Good Production
Labels
Total # of Production
Labels
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : No
Page Count : 18
Page Mode : UseOutlines
XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6
About : uuid:4dd8a205-8297-4f9c-bb8c-e87a8af8abab
Producer : Acrobat Distiller 7.0.5 (Windows)
Creator Tool : FrameMaker 7.1
Modify Date : 2005:11:17 16:12:38-05:00
Create Date : 2005:11:17 16:01:08Z
Metadata Date : 2005:11:17 16:12:38-05:00
Document ID : uuid:64398cb9-b79c-4d4f-bef5-2a8756354287
Instance ID : uuid:76b53933-aa9a-4071-903f-943acc06a581
Format : application/pdf
Title : Source Tagging Tester User Guide.book
Creator : reevesm
Author : reevesm
EXIF Metadata provided by EXIF.tools