Cheng Uei Precision Industry H500 Bluetooth Headset User Manual

Cheng Uei Precision Industry Co., Ltd. Bluetooth Headset

Contents

Part 2 Preliminary Manual

34DRAFTTURNING ON AND OFF CHANGING FOR LEFT EAR WEAROpen the ear hook 90degrees from theheadset.Gently lift and pull thetop of the ear hook upand off the upper hingepin. Then, pull it away to remove it.Flip the headset over.Hook the bottom of the ear hook onto the lower hinge pin, then lift and pull the top of the ear hook over the upper hinge pin.1234You can wear your H500 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:WEARING THE HEADSETMAKING CALLS MUTING A CALLTo turn your headset on, press the Call button. The LED indicator light flashes when the power is on.To turn you headset off, press the Call button. The LED indicator light turns off when the power is off.LED INDICATOR LIGHTSIMPORTANT: Be sure to first follow theQuick Start Guideon the reverse side of this guideto complete initial setup of your H500.Open the ear piece.Loop the ear piece over your ear. Position the microphone as necessary.Press the headset to your ear.12CHANGING VOLUME BUTTON ORIENTATION34040067o040059oIf you change your headset for left ear wear, you can also change the orientation of the volume buttons. Turn the headset power off.Press the Call button and the volume button you want to assign as the "volume up" button until the LED indicator light flashes twice.The headset power turns on.12To mute a call, press both volume buttons.FOR MORE INFORMATION ON USING YOUR MOTOROLA H500Visit us at www.hellomoto.com/bluetooth and click Support.SUPPORTIf you need more help, contact us at1- 877-MOTOBLU.AUDIO TONESThe audio tones provide information about your headset status.Audio Tone  Headset StatusSingle high tone when Volume minimum orpressing volume button maximum reachedFive rapid high tones Low batteryrepeated every 20 sec.No audio indications; Out of rangedetereriorating audioqualitySeries of 4 tones, low Audio link opento high   (headset mode)   Active call    (handsfree mode)Ring tone  Incoming callSingle high tone  Pairing confirmationSingle low tone  Voice activationDual high/low tone Voice tag not   recognizedSingle high tone  End call The LED indicator light provides information about your headset status.With the Charger Plugged InHeadset Indicator Headset StatusOff   Charging in progressOn (steady)  Charging completeWith No Charger Plugged InHeadset Indicator Headset StatusOff   Power offOn (steady)  Pairing mode10 rapid flashes  Pairing successfulPulsing (2 secondson, 6 seconds off) Connected (on a call)Flashing (.1 second on,2.9 seconds off)  Standby (not on call)CallButtonVolumeButtonsCall ButtonTo make a voice dial call, short press the Call button and speak the name.To end a call, short press the Call button.To put an active call on hold, long press the Call button.To resume a call on hold, long press the Call button.To receive a call, short press the Call button.To reject a call, long press the Call button.To answer a second incoming call, long press the Call button (places first call on hold).To toggle between two active calls, long press the Call button.To transfer a call from the phone to headset, short press the Call button.Note: Your H500 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.Quick UseH500Bluetooth®Handsfree Headset040059o1 Open Ear Hook2 Pull Ear Hook Up

Navigation menu