Cheng Uei Precision Industry H500 Bluetooth Headset User Manual

Cheng Uei Precision Industry Co., Ltd. Bluetooth Headset

Contents

Part 2 Preliminary Manual

Download: Cheng Uei Precision Industry H500 Bluetooth Headset User Manual
Mirror Download [FCC.gov]Cheng Uei Precision Industry H500 Bluetooth Headset User Manual
Document ID534806
Application ID5j14n8w/DP3zgITjqNYZpg==
Document DescriptionPart 2 Preliminary Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize200.82kB (2510279 bits)
Date Submitted2005-04-21 00:00:00
Date Available2005-04-21 00:00:00
Creation Date2005-04-11 16:32:12
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2005-04-20 19:43:31
Document Titleuntitled

Quick Use
H500
Bluetooth®
Handsfree Headset
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H500.
CHANGING FOR
LEFT EAR WEAR
TURNING ON AND OFF
To turn your headset on, press the Call
button. The LED indicator light flashes when
the power is on.
To turn you headset off, press the Call
button. The LED indicator light turns off
when the power is off.
CHANGING VOLUME
BUTTON ORIENTATION
WEARING THE
HEADSET
You can wear your H500 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
If you change your headset for left ear wear,
you can also change the orientation of the
volume buttons.
2 Loop the ear piece over your ear.
1 Open the ear hook 90
1 Turn the headset power off.
3 Position the microphone as necessary.
2 Press the Call button and the volume
4 Press the headset to your ear.
040059o
degrees from the
headset.
2 Gently lift and pull the
top of the ear hook up
and off the upper hinge
pin. Then, pull it away to
remove it.
Call
Button
1 Open Ear Hook
1 Open the ear piece.
button you want to assign as the
"volume up" button until the LED
indicator light flashes twice.
The headset power turns on.
2 Pull Ear Hook Up
Flip the headset over.
040059o
Call Button
4 Hook the bottom of the
040067o
ear hook onto the lower
3 then lift and
hinge pin,
pull the top of the ear
hook over
4 the upper
hinge pin.
FOR MORE INFORMATION ON USING
YOUR MOTOROLA H500
Visit us at www.hellomoto.com/bluetooth and
click Support.
SUPPORT
If you need more help, contact us at
1- 877-MOTOBLU.
MAKING CALLS
To make a voice dial call, short press the Call
button and speak the name.
To end a call, short press the Call button.
To put an active call on hold, long press the
Call button.
To resume a call on hold, long press the Call
button.
LED INDICATOR LIGHTS
MUTING A CALL
To mute a call, press both volume buttons.
Volume
Buttons
The LED indicator light provides information
about your headset status.
The audio tones provide information about your
headset status.
With the Charger Plugged In
Headset Indicator
Headset Status
Audio Tone
Single high tone when
pressing volume button
Five rapid high tones
repeated every 20 sec.
No audio indications;
detereriorating audio
quality
Series of 4 tones, low
to high
Off
Charging in progress
On (steady)
Charging complete
To receive a call, short press the Call button.
To reject a call, long press the Call button.
With No Charger Plugged In
Headset Indicator
Headset Status
Off
Power off
To toggle between two active calls, long
press the Call button.
On (steady)
Pairing mode
10 rapid flashes
Pairing successful
To transfer a call from the phone to
headset, short press the Call button.
Pulsing (2 seconds
on, 6 seconds off)
Connected (on a call)
Flashing (.1 second on,
2.9 seconds off)
Standby (not on call)
To answer a second incoming call, long
press the Call button (places first call on hold).
Note: Your H500 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
AUDIO TONES
Ring tone
Single high tone
Single low tone
Dual high/low tone
Single high tone
Headset Status
Volume minimum or
maximum reached
Low battery
Out of range
Audio link open
(headset mode)
Active call
(handsfree mode)
Incoming call
Pairing confirmation
Voice activation
Voice tag not
recognized
End call

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
About                           : uuid:51a8a8e7-d884-4ef6-b57d-678334f2e991
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2005:04:20 19:43:31+08:00
Create Date                     : 2005:04:11 16:32:12+08:00
Metadata Date                   : 2005:04:20 19:43:31+08:00
Document ID                     : uuid:459b82d6-9900-4281-9597-53dc31680a85
Instance ID                     : uuid:f3c3c717-e91f-4868-b978-14c9cd4f67ee
Format                          : application/pdf
Title                           : untitled
Has XFA                         : No
Page Count                      : 1
Creator Version                 : 10
Container Version               : 9
Creator                         : Adobe Illustrator(R) 10.0
For                             : Victoria Romano, Motorola
Bounding Box                    : -55 -649 1129 55
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QVZ-H500

Navigation menu