Clarion HGZ0024 Car equipment unit User Manual INSTRUCTION MANUAL OF UGZZ5 X02 FCC IC 2

Download:
Mirror Download [FCC.gov]
Document ID	1071901
Application ID	Kzqf4CwHrH+GkInVQ1g8vQ==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.07kB (238423 bits)
Date Submitted	2009-02-24 00:00:00
Date Available	2009-02-24 00:00:00
Creation Date	2009-02-24 16:15:44
Producing Software	Acrobat Elements 7.0 (Windows)
Document Lastmod	2009-02-24 16:15:44
Document Title	INSTRUCTION MANUAL OF UGZZ5-X02_FCC&IC-2.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	cmp13878

㼄㼍㼚㼍㼢㼕㻌㻵㼚㼒㼛㼞㼙㼍㼠㼕㼏㼟㻌㻯㼛㼞㼜㼛㼞㼍㼠㼕㼛㼚
㻯㻻㻺㻲㻵㻰㻱㻺㼀㻵㻭㻸
INSTRUCTION MANUAL OF UGZZ5-X02
1. BLUETOOTH MODULE SPECIFICATION
1-1. PRODUCT NAME
UGZZ5-X02
1-2. MANUFACTURE
ALPS ELECTRIC
1-3. FEATURES
Bluetooth䉼 Specification V1.2 support
Complete type of Bluetooth module, built-in various profile
Built-in Link controller, Link Manager Protocol
Output Power class2 compliant
Type with a chip antenna
Full custom package with pwb can be fit to only navigation products made by Xanavi
Built-in Flash memory(8Mbit), system clock 26MHz(OSC)
B to B interface
1-4. SPECIFICATION
1-4-1. MECHANICAL SPECIFICATION
1-4-1-1. EXTERNAL DIMENSIONS
Refer to the following page.
Chip Antenna
TAIYO YUDEN
AF216M245001
Coaxial Connectors with Switch
Murata Manufacturing
MM8430-2610
BtoB Connector
Matsushita Electric
AXK620347Y
BLUETOOTH MODULE
ALPS ELECTRIC
UGZZ5-611B
1-4-1-2. MASS
4.4 [g]
1-4-2. ELECTRIC SPECIFICATION
1-4-2-1. POWER-SUPPLY-VOLTAGE
DC +3.1 to +3.5 [V]
1-4-2-2. TEMPERATURE RANGE
-30 to +85 [degree C]
1-4-3. RF SPECIFICATION
1-4-3-1. NORMAL TRANSMIT POWER(AVERAGED POWER)
-6 to +4 [dBm]
1-4-3-2. REFERENCE SENSITIVITY LEVEL(BER=0.001%)
MAX. -70 [dBm]
INSTRUCTION MANUAL OF NAU-P8100EU - 1 / 5 -
㼄㼍㼚㼍㼢㼕㻌㻵㼚㼒㼛㼞㼙㼍㼠㼕㼏㼟㻌㻯㼛㼞㼜㼛㼞㼍㼠㼕㼛㼚
㻯㻻㻺㻲㻵㻰㻱㻺㼀㻵㻭㻸
1-5. LABEL INFORMATION
1-5-1. LABEL LAYOUT
UGZZ5-X02(Back View)
Label
FCC ID: SJ2HGZ0024
IC ID:5527A-HGZ0024
1-5-2. CONTENTS OF LABEL
Model Number
Xanavi Parts Number
Rev. Number
Lot Number
TELEC Mark & ID
FCC/IC ID
FCC ID: SJ2HGZ0024
IC ID:5527A-HGZ0024
Company Name
1-6. CONNECTOR PIN ASSIGNMENT
BtoB Connector terminal NO.
NO.
10
11
12
13
14
15
16
17
18
19
20
PIN NAME
VCC
GND
PTB1
PTE0
PTA5
SIOF_SYNC
SIOF_TXD
GND
SCIF0_RTS
SCIF0_CTS
SCIF0_RXD
SCIF0_TXD
SIOF_SCK
SIOF_RXD
CLK11/12M
PTA6
BOOT_E
PTE5
RESETP/
VCC
NO.
DESCRIPTION
Power Supply 3.3V
Ground
AV Master Clock Select(44.1kHz=Low, 48kHz=High)
PCM_Reset(Active Low)
HF/AV Status signal
Audio Frame signal
AV/HF Output
Ground
UART_RTS
UART_CTS
UART_RX
UART_TX
Audio Clock
AV/HF Input
AV Master clock Input
MODE Select
BOOT Enable
PCM_Mute
Reset(Active Low)
Power Supply 3.3V
INSTRUCTION MANUAL OF NAU-P8100EU - 2 / 5 -
㼄㼍㼚㼍㼢㼕㻌㻵㼚㼒㼛㼞㼙㼍㼠㼕㼏㼟㻌㻯㼛㼞㼜㼛㼞㼍㼠㼕㼛㼚
㻯㻻㻺㻲㻵㻰㻱㻺㼀㻵㻭㻸
1-7. BLOCK DIAGRAM
2. PROCEDURE TO BUILD IN
2-1. PROCEDURE FOR UGZZ5-XO2
(1)Install UGZZ5-X02 to BT-CAP
BT-CAP
UGZZ5-X02
After install UGZZ5-X02 to BT-CAP
(BT-MODULE-AS)
BOARD-GUIDE
SLIDE
Slide to 4 points of Board-guide, and sandwich the module.
(2)Connect BT-MODULE-AS to FRONT PCB by BtoB connection
Tighten up a screw in order of one to two.
FRONT PCB
After Connect BT-MODULE-AS to FRONT PCB
by BtoB connection (FRONT-PCB-AS)
B to B connection
INSTRUCTION MANUAL OF NAU-P8100EU - 3 / 5 -
㼄㼍㼚㼍㼢㼕㻌㻵㼚㼒㼛㼞㼙㼍㼠㼕㼏㼟㻌㻯㼛㼞㼜㼛㼞㼍㼠㼕㼛㼚
㻯㻻㻺㻲㻵㻰㻱㻺㼀㻵㻭㻸
(3)Install FRONT-PCB-AS to Navigation-unit
CONDUCTIVE SHEET
B to B connection
Connect FRONT-PCB-AS to Navi-board
by FCC cable connection.
Tighten up a screw in order of one to four.
(4)Install DVD-AS to Navigation-unit
(5)Install UPPER-COVER to Navigation-unit
(6)Install FRONT-COVER to Navigation-unit
(7)Install REAR-COVER to Navigation-unit
UGZZ5-X02 installation position
Chip Antenna position
INSTRUCTION MANUAL OF NAU-P8100EU - 4 / 5 -
㼄㼍㼚㼍㼢㼕㻌㻵㼚㼒㼛㼞㼙㼍㼠㼕㼏㼟㻌㻯㼛㼞㼜㼛㼞㼍㼠㼕㼛㼚
㻯㻻㻺㻲㻵㻰㻱㻺㼀㻵㻭㻸
3. NOITCE
-Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
-Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
-Please note that this users manual should not be provided to end-users.
-The following sentence has to be displayed on the outside of the device in which the module is installed:
"Contains Transmitter Module FCC ID: SJ2HGZ0024", or "Contains FCC ID: SJ2HGZ0024"
-This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
INSTRUCTION MANUAL OF NAU-P8100EU - 5 / 5 -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Copy, Extract
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Elements 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:02:24 16:15:44+09:00
Create Date                     : 2009:02:24 16:15:44+09:00
Format                          : application/pdf
Title                           : INSTRUCTION MANUAL OF UGZZ5-X02_FCC&IC-2.pdf
Creator                         : cmp13878
Document ID                     : uuid:7ab5b7ba-9b94-447e-96d6-ced91e16270e
Instance ID                     : uuid:61782bff-b71e-4a7b-9c48-d005e65e4c19
Page Count                      : 5
Author                          : cmp13878

EXIF Metadata provided by EXIF.tools