CommScope Technologies RP-A2114 Multi-Band Radio User Manual ORP install

Download:
Mirror Download [FCC.gov]
Document ID	3303806
Application ID	xEhpbc7lrkoWpdNasmembg==
Document Description	Installation
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.24kB (178005 bits)
Date Submitted	2017-03-03 00:00:00
Date Available	2017-04-17 00:00:00
Creation Date	2016-02-09 08:03:54
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-02-09 08:15:57
Document Title	ORP_install.book
Document Creator	FrameMaker 12.0.4
Document Author:	vadams

OneCell®
Outdoor Radio Point Installation
Document Number: 913032
Document Revision: 1.04
Date: February 2016
What’s in the box
The outdoor Radio Point (RP) ships with the following hardware:
•
Radio Point with mounting plate and brackets attached
•
Four mounting screws (M5 x 10mm)
•
RJ45, IP67 connector
•
Two N-type antenna couplers
Mounting the Radio Point (RP) on a pole requires the following hardware provided by
the system integrator:
•
Two adjustable clamps
Mounting the Radio Point (RP) on a wall requires the following hardware provided by
the system integrator:
•
Four molly screws capable – 50 lb (23 kg) minimum rating
Before installing the RP on the pole, terminate the RP end of the Ethernet cable with
the RJ45, IP67 connector provided in the box.
NOTE
For more information on installing Radio Points, see OneCell Installation and
Commissioning (913025).
Pole mount installation
NOTE
The minimum pole diameter requirement is 4'' (102mm).
Slide the adjustable clamp through the slots on each RP mounting bracket on the
RP plate.
Slide adjustable
clamp end
through slots
2
Wrap each clamp around the pole and tighten the clamp screw to secure the RP to
the pole.
Insert two screws into the upper holes on opposite sides of the RP as shown in the
drawing below.
Insert screws
into the holes
called out – one
on each side.
4
Hang the RP to the mounting bracket using the installed screws. Align holes at
bottom location of bracket and install two additional screws. Tighten all four
screws.
5
Insert and tighten the bottom screws through the plate hole into both sides of the
RP.
Connect the antenna couplers on the top of the RP.
Connect the Ethernet cable RJ45 end to the bottom of the RP.
Antenna couplers
Bottom screw
Ethernet connector RJ45
Installation complete. To configure the RP, see the commissioning procedures in
OneCell Installation and Commissioning (913025).
Wall mount installation
Remove the brackets from the back of the mounting plate.
2
Drill four holes in the wall using the mounting plate to determine the hole
locations. Mount the backplate on the wall with four molly screws.
3
Insert two screws into the upper holes on opposite sides of the RP as shown in the
drawing below.
Insert screws
into the holes
called out – one
on each side.
Attach the RP to the mounting plate. Tighten the screws on the RP.
5
Insert and tighten the bottom screws through the plate hole into both sides of the
RP.
Connect the antenna couplers on the top of the RP.
Connect the Ethernet cable RJ45 end to the bottom of the RP.
Antenna couplers
Bottom screw
Ethernet connector RJ45
Installation complete. To configure the RP, see the commissioning procedures in
OneCell Installation and Commissioning (913025).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : vadams
Create Date                     : 2016:02:09 08:03:54Z
Modify Date                     : 2016:02:09 08:15:57-05:00
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.150055, 2012/11/19-18:45:32
Format                          : application/pdf
Creator                         : vadams
Title                           : ORP_install.book
Creator Tool                    : FrameMaker 12.0.4
Metadata Date                   : 2016:02:09 08:15:57-05:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:42dc6f3e-38a1-4d19-9076-879cfba483f2
Instance ID                     : uuid:72c6513e-c655-4530-96b6-d03a3bbccc16
Page Mode                       : UseNone
Page Count                      : 10

EXIF Metadata provided by EXIF.tools