Coulisse ABC05 Motor for indoor blinds User Manual ABC 05 U indd

Download:
Mirror Download [FCC.gov]
Document ID	1703510
Application ID	zv3hnKocAt3qXM/DaMa/DA==
Document Description	manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.3kB (491267 bits)
Date Submitted	2012-05-22 00:00:00
Date Available	2012-06-01 00:00:00
Creation Date	2017-10-31 14:11:56
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-31 14:11:56
Document Title	ABC-05-U.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Irene

Step 5: Set endpositions (the positions can also be set after first installation)
User Manual
DC Tubular motor
ABC-05
First set the upper endposition
Action confirmed:
blind stops stepping
for 3 seconds
1.
2.
Use the up and down
buttons to go to
the upper endposition
Set the position
by pressing
the center + down button
Then set the lower endposition
WARNING:
Important safety instructions. Follow all instructions,
since incorrect installation can lead to severe injury.
WARNING:
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
Use the up and down
buttons to go to
the lower endposition
Action confirmed:
blind stops stepping
for 3 seconds
2.
1.
Set the position
by pressing
the center + up button
Step 6: Exit the program-mode by pressing the program button again
indoor use only
1. General information
The ABC-05 is a tubular motor to motorize Coulisse Absolute Roller. The tubular motor
is compatible with Coulisse tubes and makes it possible to operate your blind motorised
with minimum noise. The motors are operated with a Coulisse remote control only.
Endpoints and favorite position are set with the remote control. The motor is energy
efficienct and can also be battery operated.
Exit program mode:
Shortly press
program button
2.2 Normal use
- Manual Control
1.1 General dimensions
>2 sec
OR
L1
Hold program button
for more than 2 sec.
Ø d1
Ø D1
L2
Blind moves as
long as button is
pressed
(max. 15 sec.)
For moving in opposite
direction release button
and hold program button
again for more than 2 sec.
L3
1.1A
2.3 Reset
- Reset to factory defaults
Type
L1
ABC-05
L2
250
L3
11
Ø D1
Ø d1
243
40
26.5
Type
Power supply
ABC-05
12-24V DC
10 sec
1 sec
1.2 Performances
Rated power Torq - rpm
0.6A - 7W
Operating
temp.
0.8Nm - 28 rpm
Max. channels to
pair
5°-60°
32 channels
Shortly press program
button ( <2 sec. )
1.3 Compatibility
Type
Roller
ABC-05
Venetian
28, 30, 35mm
Other
Program mode:
Blind is
stepping...
Hold program button for 10 sec.
untill blind stops stepping
- Reset to factory defaults & Erase all paired channels/remotes
1.4 Connectors and buttons
15 sec
1 sec
Program button
Shortly press program
button ( <2 sec. )
12-24V DC -0.6A input
Hold program button for 15
sec. untill blind stops stepping
and steps once
2.4 Additional blind settings
Additional blind settings:
Available
Switch rotation direction
Yes
Favorite position
Yes
BatteryMode
Yes
We refer to the manual of the Coulisse Remote control to set the addtional blind settings.
2. Programming and operating
2.1 First use
Step 1: Connect the motor with the 12V powersupply
Program button
12-24V DC -0.6A input
Step 2: Set the blind in program-mode by pushing the program button
3. Tips & Troubleshooting
Please check www.coulisse.nl for the latest tips and troubleshooting guide
4. Safety & Cleaning
4.1 Safety
(also possible by using ‘SingleSelect’, see manual remote control*)
WARNING:
1 sec
Set to program mode:
Shortly press
program button
Program mode:
Blind is
stepping...
Program mode:
Blind is
stepping...
Do not make repairs yourself. Do not attempt to open the device or
disassemble it. You run the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
Do not let children play with the blind and/or remote control.
Only use powersupplies or batteries that comply with the specifications on the motor.
In case of malfunction, unplug the device or remove the batteries and contact your dealer.
Take care that the blind can move freely and is not blocked by objects.
Take care that the powersupply cable is out of reach for children.
Do not paint the device.
Keep the device dry.
4.2 Cleaning
Follow these general rules when cleaning the outside of the device and its components:
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Don’t use aerosol sprays, solvents, alcohol, or abrasives.
Step 3: Pair the blind to a channel/remote
Action confirmed:
blind stops stepping
for 3 seconds
5. Service & Support
WARNING:
Choose channel
by pressing
the ChannelSelect button
Pair/unpair by pressing
the program button on the
backside of the remote
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
Online Resources
For the latest information and updated manuals go to www.coulisse.nl.
Step 4: Switch the rotating direction
If you press down
and the blind goes up,
the rotation direction
of the blind
has to be switched.
Set the blind in program
mode and follow
this step.
Action confirmed:
blind stops stepping
for 3 seconds
Obtaining Warranty Service
First follow the advice in this booklet and then go to your local dealer.
If the product appears to be damaged or does not function properly, go to your local dealer
for instructions on how to obtain warranty service.
Disclaimer:
© Copyright Coulisse
Press the up + down button to
change the rotation direction
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means,
Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to
mistakes and/or faults in this manual.
Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any
person or entity of such revisions or changes.
The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your
Coulisse contact person .
Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands
We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl.
ABC-05-U_R0_GB1
electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher.
*Manuals are also available on our website www.coulisse.nl

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Irene
Create Date                     : 2011:02:25 13:37:33+01:00
Modify Date                     : 2011:02:25 13:38:31+01:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:02:25 13:38:31+01:00
Format                          : application/pdf
Title                           : ABC-05-U.indd
Creator                         : Irene
Document ID                     : uuid:27498dc3-736d-4c17-a18b-01d42562ecf9
Instance ID                     : uuid:5e93f0b5-24f6-4520-865c-afe58a9b4609
Page Count                      : 1

EXIF Metadata provided by EXIF.tools