Coulisse ABC05 Motor for indoor blinds User Manual ABC 17 U indd

Coulisse B.V. Motor for indoor blinds ABC 17 U indd

manual 2

Download: Coulisse ABC05 Motor for indoor blinds User Manual ABC 17 U indd
Mirror Download [FCC.gov]Coulisse ABC05 Motor for indoor blinds User Manual ABC 17 U indd
Document ID1703511
Application IDzv3hnKocAt3qXM/DaMa/DA==
Document Descriptionmanual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize187.95kB (2349415 bits)
Date Submitted2012-05-22 00:00:00
Date Available2012-06-01 00:00:00
Creation Date2011-03-11 10:12:05
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2011-03-11 10:12:05
Document TitleABC-17-U.indd
Document CreatorPScript5.dll Version 5.2.2
Document Author: Irene

Step 5: Set endpositions (the positions can also be set after first installation)
User manual
Middle motor
ABC-17
First set the upper endposition
Action confirmed:
blind stops stepping
for 3 seconds
1.
2.
Use the up and down
buttons to go to
the upper endposition
Set the position
by pressing
the center + down button
Then set the lower endposition
WARNING:
Important safety instructions. Follow all instructions,
since incorrect installation can lead to severe injury.
WARNING:
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
Use the up and down
buttons to go to
the lower endposition
Action confirmed:
blind stops stepping
for 3 seconds
2.
1.
Set the position
by pressing
the center + up button
Step 6: Exit the program-mode by pressing the program button again
indoor use only
1. General information
The ABC-17 is a middle motor for the motorisation of the Absolute roman blind system of
Coulisse 25 mm venetian blinds and 20-25 mm pleated blinds. The motor can be operated
with the Coulisse remote control only. End positions and favourite positions can be programmed
with the remote control. The motor is silent, energy efficient and equipped for the use of
batteries as well for the use of solar energy.
1.1 General dimensions
Exit program mode:
Shortly press
program button
2.2 Normal use
- Manual Control
L2
D2
>2 sec
OR
D1
L1
L3
D4
Hold program button
for more than 2 sec.
D3
1.1A
Type
L1
L2
ABC-17
182
Ø D1
L3
192
126
Ø D2
24
Ø D3
Ø D4
24
Blind moves as
long as button
is pressed
(max. 15 sec.)
For moving in opposite
direction release button
and hold program button again
for more than 2 sec.
2.3 Resetten
- Reset to factory defaults
1 sec
10 sec
1.2 Performances
Type
Power
supply
Rated
Power
ABC-17 12-24VDC
Max. lifting Max.
weight
Torq - rpm
0.6A-7W
4,5 kg
Operating
temp.
Max. channels
to pair
5°-60°
32 channels
0.8Nm-28 rpm
Shortly press
program button
( <2 sec. )
1.3 Compatibility
Type
ABC-17
Roman blinds
Venetian blind
Pleated blind
35 mm
25 mm
20-25 mm
Program mode:
Blind is
stepping...
Hold program button
for 10 sec. untill blind
stops stepping
- Reset to factory defaults & Erase all paired channels/remotes
1 sec
15 sec
1.4 Connectors and buttons
Shortly press
program button
( <2 sec. )
Program mode:
Blind is
stepping...
Hold program button
for 15 sec. untill blind
stops stepping
and steps once
2.4 Additional blind settings
12-24VDC -0.6A input
Program button
Additional blind settings:
Available
Switch rotation direction
Favorite position
BatteryMode/Solar
Yes
Yes
Yes
2. Programming and operating
2.1 First use
Step 1: Connect the motor to 12 - 24 VDC
We refer to the manual of the Coulisse Remote control to set the addtional blind settings.
3. Tips & Troubleshooting
Please check www.coulisse.nl for the latest tips and troubleshooting guide.
4. Safety & Cleaning
12-24VDC -0.6A input
Program button
Step 2: Set the blind in program-mode by pushing the program button
4.1 Safety
WARNING:
(also possible by using ‘SingleSelect’, see manual remote control*)
1 sec
Set to program mode:
Shortly press
program button
Program mode:
Blind is
stepping...
Do not let children play with the blind and/or remote control.
Only use powersupplies or batteries that comply with the specifications on the motor.
In case of malfunction, unplug the device or remove the batteries and contact your dealer.
Take care that the blind can move freely and is not blocked by objects.
Take care that the powersupply cable is out of reach for children.
Do not paint the device.
Keep the device dry.
4.2 Cleaning
Follow these general rules when cleaning the outside of the device and its components:
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Don’t use aerosol sprays, solvents, alcohol, or abrasives.
Step 3: Pair the blind to a channel/remote
Action confirmed:
blind stops stepping
for 3 seconds
5. Service & Support
WARNING:
Choose channel
by pressing
the ChannelSelect button
Pair/unpair by pressing
the program button on
the backside of the remote
Do not make repairs yourself. Do not attempt to open the device or
disassemble it. You run the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
Online Resources
For the latest information and updated manuals go to www.coulisse.nl.
Obtaining Warranty Service
First follow the advice in this booklet and then go to your local dealer.
If the product appears to be damaged or does not function properly, go to your local dealer
for instructions on how to obtain warranty service.
Step 4: Draairichting veranderen
If you press down
and the blind goes up,
the rotation direction
of the blind
has to be switched.
Set the blind in program
mode and follow
this step.
Do not make repairs yourself. Do not attempt to open the device or
disassemble it. You run the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
Action confirmed:
blind stops stepping
for 3 seconds
Disclaimer:
© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic,
mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher.
Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or
faults in this manual.
*Manuals are also available on our website www.coulisse.nl
Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person
or entity of such revisions or changes.
The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your Coulisse contact person.
We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl.
ABC-17-U_R0_GB0
Press the up + down button to change
the rotation direction

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2011:03:11 10:12:05+01:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:03:11 10:12:05+01:00
Trapped                         : False
Producer                        : Acrobat Distiller 9.0.0 (Windows)
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Title                           : ABC-17-U.indd
Creator                         : Irene
Author                          : Irene
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ZY4ABC05

Navigation menu