Coulisse ABC05 Motor for indoor blinds User Manual ABC 17 U indd

Coulisse B.V. Motor for indoor blinds ABC 17 U indd

manual 2

1.2.1. 2.indoor use onlyABC-17-U_R0_1.1AD1L1L2 D2D4L3D3-+-+User manual Middle motor ABC-171. General information1.1 General dimensionsThe ABC-17 is a  middle motor for the motorisation of the Absolute roman blind system of Coulisse 25 mm venetian blinds and 20-25 mm pleated blinds. The motor can be operated with the Coulisse remote control only. End  positions and favourite positions can be programmed with the remote control. The motor is silent, energy effi cient and equipped for the use of batteries as well for the use of solar energy. WARNING:  Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING: 1.2 Performances1.3 Compatibility1.4 Connectors and buttonsProgram button12-24VDC -0.6A input2. Programming and operating2.1 First useStep 1: Connect the motor to 12 - 24 VDC(also possible by using ‘SingleSelect’, see manual remote control*)*Manuals are also available on our website www.coulisse.nlStep 2: Set the blind in program-mode by pushing the program buttonStep 3: Pair the blind to a channel/remoteChoose channel by pressing the ChannelSelect buttonPair/unpair by pressing the program button on the backside of the remotePress the up + down button to change the rotation directionStep 4: Draairichting veranderenSet to program mode:Shortly press program button Program mode:Blind is stepping...1 secAction confi rmed: blind stops stepping for 3 secondsAction confi rmed: blind stops stepping for 3 secondsIf you press down and the blind goes up, the rotation direction of the blind has to be switched. Set the blind in program mode and follow this step.We refer to the manual of the Coulisse Remote control to set the addtional blind settings.2.4  Additional blind settings5. Service & Support4.2 CleaningFollow these general rules when cleaning the outside of the device and its components:-  Make sure the device is unplugged.-  Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.-  Don’t use aerosol sprays, solvents, alcohol, or abrasives.Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING: Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING: -  Do not let children play with the blind and/or remote control.-  Only use powersupplies or batteries that comply with the specifi cations on the motor.-  In case of malfunction, unplug the device or remove the batteries and contact your dealer.-  Take care that the blind can move freely and is not blocked by objects.-  Take care that the powersupply cable is out of reach for children.-  Do not paint the device.-  Keep the device dry.Online ResourcesFor the latest information and updated manuals go to www.coulisse.nl.Obtaining Warranty ServiceFirst follow the advice in this booklet and then go to your local dealer. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service.3. Tips & TroubleshootingPlease check www.coulisse.nl for the latest tips and troubleshooting guide.Disclaimer:© Copyright CoulisseAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital  or otherwise without the written permission of the publisher.Although this manual has been composed with the most care, Coulisse B.V. does not accept  any responsibility for damage due to mistakes and/or faults in this manual.Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of such revisions or changes.The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your Coulisse contact person.We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl.Shortly press program button ( <2 sec. )Program mode:Blind is stepping...- Reset to factory defaults & Erase all paired channels/remotesHold program button for 10 sec. untill blind stops stepping2.2 Normal use- Manual ControlHold program button for more than 2 sec. Blind moves as long as button is pressed (max. 15 sec.)For moving in opposite direction release button and hold program button again for more than 2 sec.2.3 ResettenShortly press program button ( <2 sec. )Program mode:Blind is stepping...- Reset to factory defaultsHold program button for 15 sec. untill blind stops stepping and steps once1 sec 15 secStep 6: Exit the program-mode by pressing the program button againThen set the lower endpositionStep 5: Set endpositions (the positions can also be set after fi rst installation)Use the up and down buttons to go to the lower endpositionSet the position by pressing the center + up buttonAction confi rmed: blind stops stepping for 3 secondsAction confi rmed: blind stops stepping for 3 secondsExit program mode: Shortly press program button1 sec 10 sec>2 sec     Type Power supplyRated PowerMax. lifting weight Max. Torq - rpmOperating temp.Max. channels to pairABC-17 12-24VDC  0.6A-7W 4,5 kg 0.8Nm-28 rpm 5°-60° 32 channels     Type Roman blinds Venetian blind Pleated blindABC-17 35 mm 25 mm 20-25 mmOR     Additional blind settings: Available Switch rotation direction YesFavorite position YesBatteryMode/Solar Yes4. Safety & CleaningUse the up and down buttons to go to the upper endpositionSet the position by pressing the center + down buttonFirst set the upper endposition     Type L1 L2 L3 Ø D1 Ø D2 Ø D3 Ø D4ABC-17 182 192 126 24 5 24 94.1 Safety GB0Program button12-24VDC -0.6A input

Navigation menu