Coulisse ABC05 Motor for indoor blinds User Manual ABC 18 U indd

Coulisse B.V. Motor for indoor blinds ABC 18 U indd

manual 3

ABC-18-A_R0_Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands1. 2.1.2.1.2.120 mm25 mm35 mm38 mmindoor use only-+User manualTilt-only motor 35-50 ABC-182. Programming and operationGB02.1 First useWARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING:1. General informationThe ABC-18 is a universal tilt-motor for 35 mm and 50 mm venetian blinds.The motor is placed in the middle of the head rail.1.1 DimensionsProgram button12 - 24 V DC -0.6A input2.2 Operation- Manual operationPress and hold the program button for at least 2 sec.  Blind is moving as long as the button remains pressed (max. 15 sec.)In order to make the blind move in the other direction, release the button and press and hold the button once more for at least 2 sec.>2 secSee manual remote control for programming of advanced settings. 2.4  Advanced settings     Advanced settings: AvailableSwitch rotation direction YesFavourite position YesBatteryMode Yes5. Service & Support4. Safety & Cleaning4.1 Safety4.2 CleaningFollow these general rules when cleaning the outside of the device and its components:-  Make sure the device is unplugged.-  Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.-  Don’t use aerosol sprays, solvents, alcohol, or abrasives.Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING: -  Do not let children play with the blind and/or remote control.-  Only use powersupplies or batteries that comply with the specifi cations on the motor.-  In case of malfunction, unplug the device or remove the batteries and contact your dealer.-  Take care that the blind can move freely and is not blocked by objects.-  Take care that the powersupply cable is out of reach for children.-  Do not paint the device.-  Keep the device dry.Online ResourcesFor the latest information and updated manuals go to www.coulisse.nl.Obtaining Warranty ServiceFirst follow the advice in this booklet and then go to your local dealer. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service.3. Tips & TroubleshootingPlease check www.coulisse.nl for the latest tips and troubleshooting guide.Disclaimer:© Copyright CoulisseAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital  or otherwise without the written permission of the publisher.Although this manual has been composed with the most care, Coulisse B.V. does not accept  any responsibility for damage due to mistakes and/or faults in this manual.Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of such revisions or changes.The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your Coulisse contact person.We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl.     ABC-18Power supply 12-24V - 0,3 ARated power 3WTorque (rpm) 0.65NmOperating temperature 5 - 60 °Max. number of channels 32 channels1.2 Specifi cations1.3 Power supply and buttonsStep 5: Programming end positionsNow program the lower positionUse the up and down button to go to the lower position Confi rm the position by pressing the middle and down buttonAction confi rmed: blinds stop stepping for 3 sec.Exit program mode: shortly press program buttonAction confi rmed: blinds stop stepping for 3 sec.Use the up and down button to go to the upper positionFirst program the upper positionStep 4: Switch direction of rotationPress the up and down button at the same time to switch the direction of rotationAction confi rmed: blinds stop stepping for 3 sec.Step 3: Pair blind to channel/remote controlSelect channel with Channelselect buttonPair/unpair by pressing the program button on the back side of the remote control Action confi rmed: blinds stop stepping for 3 sec.Step 2: Set the blind in program mode by pressing the program button (also possible with SingleSelect, See manual remote control)Program mode:blind is stepping…1 secSet in program mode: shortly press program buttonStep 1: Connect the motor to 12 - 24 V DCShortly press program button (<2 sec.)Program mode:blind is stepping…Press and hold the program button for 10 sec. until the blind stops stepping2.3 Reset- Reset to factory defaults1 sec 10 sec- Reset to factory defaults & erase all paired channels/remote controlsShortly press program button (<2 sec.)Program mode:blind is stepping…Press and hold the program button for 15 sec. until the blind stops stepping and steps once again.  1 sec 15 secDo not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING:

Navigation menu