Dell DWRFID1602 RFID 13.56MHz Wireless Module User Manual FCC Class B

Dell Inc. RFID 13.56MHz Wireless Module FCC Class B

User Manual_b_us-rev15-10

Electromagnetic Interference (EMI) is any signal or emission, radiated in free space or
conducted along power or signal leads, that endangers the functioning of radio navigation
or other safety service or seriously degrades, obstructs, or repeatedly interrupts a licensed
radio communications service. Radio communications services include but are not limited
to AM/FM commercial broadcast, television, cellular services, radar, air-traffic control,
pager, and Personal Communication Services (PCS). These licensed radio services, and
unlicensed radio services, such as WLAN or Bluetooth, along with unintentional radiators
such as digital devices, including computer systems, contribute to the electromagnetic
environment.
Electromagnetic Compatibility (EMC) is the ability of items of electronic equipment to
function properly together in the electronic environment. While this computer system has
been designed and determined to be compliant with regulatory agency limits for EMI, there
is no guarantee that interference will not occur in a particular installation.
Dell™ products are designed, tested, and classified for their intended electromagnetic
environment. These electromagnetic environment classifications generally refer to the
following harmonized definitions:
•
Class B products are intended for use in residential/domestic environments but
may also be used in non-residential/non-domestic environments.
Note: The residential/domestic environment is an environment where the use of
broadcast radio and television receivers may be expected within a distance of 10
m from where this product is used.
•
Class A products are intended for use in non-residential/non-domestic
environments. Class A products may also be utilized in residential/domestic
environments but may cause interference and require the user to take adequate
corrective measures.
If this equipment does cause interference with radio communications services, which can
be determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient the receiving antenna.
•
Relocate the computer with respect to the receiver.
•
Move the computer away from the receiver.
•
Plug the computer into a different outlet so that the computer and the receiver are
on different branch circuits.
If necessary, consult a Dell Technical Support representative or an experienced
radio/television or EMC technician for additional suggestions.
Information Technology Equipment (ITE), including peripherals, expansion cards, printers,
input/output (I/O) devices, monitors, and so on, that are integrated into or connected to the
system should match the electromagnetic environment classification of the computer
system.
A Notice about Shielded Signal Cables: Use only shielded cables for connecting
peripherals to any Dell™ device to reduce the possibility of interference with radio
communications services. Using shielded cables ensures that you maintain the appropriate
EMC classification for the intended environment. For parallel printers, a cable is
available from Dell™. If you prefer, you can order a cable from Dell™ on the World Wide
Web at www.dell.com.
FCC, Class B
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer's instruction manual, may cause interference
with radio and television reception. This equipment has been tested and found to
comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may
cause undesired operation.
Notice: The FCC regulations provide that changes or modifications not expressly approved
by Dell Inc. could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference with radio or
television reception, which can be determined by turning the equipment off and on, you are
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the antenna of the radio/television receiver.
•
Increase the separation between this equipment and the radio/television receiver.
•
Plug the equipment into a different outlet so that the equipment and the radio/television
receiver are on different power mains branch circuits.
•
Consult a representative of Dell™ or an experienced radio/television technician for
additional suggestions.
The following information is provided on the device or devices covered in this document
in compliance with FCC regulations:
Product name: Please refer to the product-specific Product Safety, EMC and
Environmental Datasheet for the Regulatory Model and Reference
Number identification of products covered by an FCC Declaration of
Conformity.
This equipment’s unique regulatory compliance identification is
provided by the Regulatory Model and Reference Number. These
regulatory compliance identification markings are on the regulatory
label affixed to your equipment and should not be confused with
marketing name or model of the equipment. To facilitate positive
identification, request for regulatory compliance information for this
equipment should include the Regulatory Model and Reference
Number.
Company name: Dell Inc. is the responsible party or acting as a point-of-contact for
the responsible party of a Dell-branded ODM/OEM product. For
an EMC compliance issue or a regulatory inquiry, please use the
following contact information:
Dell Inc.
Global Product Compliance, Engineering and
Environmental Affairs
One Dell Way PS4-30
Round Rock, Texas 78682 USA
512-338-4400
For a copy of the FCC Declaration of Conformity, please send an
e-mail to Regulatory_Compliance@dell.com providing the
Marketing Name, Regulatory Model and Reference Number for
the applicable product(s) as listed on the Product Safety, EMC and
Environmental Datasheet, and/or as listed on the Regulatory Label
affixed to your product.

Navigation menu