Dell DWRFID1602 RFID 13.56MHz Wireless Module User Manual OEM installation guide
Dell Inc. RFID 13.56MHz Wireless Module OEM installation guide
Dell >
Contents
- 1. UserMan_Host Quick Guide
- 2. UserMan_Module
- 3. UserMan_OEM installation guide
- 4. Safety and Regulatory Information
- 5. User Manual_b_english_us-rev15-10
- 6. User Manual_rfid_us
- 7. User Manual_P73G
- 8. User Manual_b_us-rev15-10
- 9. User Manual (host)
- 10. User manual
- 11. User Manual_fcc_english
- 12. User Manual_states
- 13. Users Manual
UserMan_OEM installation guide
OEM Installation Guidance
For Dell RFID 13.56MHz Wireless Module, FCC ID: E2K‐DWRFID1602
‐ OEM integrators must ensure that its product is electrically identical to Dell’s reference designs. Any
modifications to Dell’s reference designs may invalidate regulatory approvals in relation to the product,
or may necessitate notifications to the relevant regulatory authorities.
‐ OEM integrators are responsible for regression testing to accommodate changes to designs, new
antennas, and host and submit for C2PC filings.
Colocation with other transmitter modules will be addressed through filings for those co‐located
transmitters when necessary or that colocation of other transmitters will be according to applicable
KDB guidelines including those for RF exposure
‐The final system integrator must ensure there is no instruction provided in the user manual or
customer documentation indicating how to install or remove the transmitter
‐ Appropriate labels must be affixed to the product that complies with applicable regulations in all
respects. The regulatory label on the final system must include the statement: “Contains FCC ID:
E2K‐ DWRFID1602 and/or IC: 1514B‐ DWRFID1602”.
‐ A user’s manual or instruction manual must be included with the product that contains the text as
required by applicable law shall be provided to OEM integrators. They may include:
1. USA—Federal Communications Commission (FCC)
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna
‐Increase the distance between the equipment and the receiver.
‐Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
The final host manual shall include the following regulatory statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna
‐Increase the distance between the equipment and the receiver.
‐Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
2. Canada ‐ Industry Canada (IC)
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
French:
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L‘utilisation de
ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de
brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.