Dialog Semiconductor SC14A DECT Cordless Voice Module User Manual safety requirements
Dialog Semiconductor BV DECT Cordless Voice Module safety requirements
Contents
- 1. user manual
- 2. user manual safety requirements
user manual safety requirements
1. Safety requirements This section provides of an overview of the safety requirements you must adhere to when working with the Cordless Voice Module SC14CVMDECT. 1) The specific external power supply for the Cordless Voice Module SC14CVMDECT has to fulfil the requirements according to clause 2.5 (Limited power source) of this standard EN 60950-1:2006. 2) Interconnection circuits shall be selected to provide continued conformance to the requirements of clause 2.2 for SELV (Safety Extra Low Voltage) circuits according to EN 60950-1:2006 after making connections. 3) Interface type not subjected to over voltages (i.e. does not leave the building). 4) Requirements additional to those specified in this standard may be necessary for: Equipment intended for operation in special environments (for example, extremes of temperature, excessive dust, moisture or vibration, flammable gases and corrosive or explosive atmospheres). Equipment intended to be used in vehicles, on board ships or aircraft, in tropical countries or at altitudes grater than 2000 m. Equipment intended for use where ingress of water is possible. 5) Installation by qualified personnel only! 6) The product is a component intended for installation and use in complete equipment. The final acceptance of the component is dependent upon its installation and use in complete equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 Language : da-DK Tagged PDF : Yes Author : hrasmussen Creator : Microsoft® Office Word 2007 Create Date : 2011:04:11 12:21:01 Modify Date : 2011:04:11 12:21:01 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools