Diversey R37615-00 Soap Dispenser with 900 MHz ISM User Manual
Diversey Inc Soap Dispenser with 900 MHz ISM Installation Guides
a href="https://usermanual.wiki/Diversey" itemprop="url">
Diversey >
Installation Guides
| Download: | |
| Mirror Download [FCC.gov] | |
| Document ID | 3663531 |
| Application ID | xHTOvLKvsG0vjOyW4B3llQ== |
| Document Description | Installation Guides |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 173.24kB (2165522 bits) |
| Date Submitted | 2017-12-05 00:00:00 |
| Date Available | 2018-06-03 00:00:00 |
| Creation Date | 2016-06-16 14:59:49 |
| Producing Software | Adobe Acrobat 10.1.13 Paper Capture Plug-in |
| Document Lastmod | 2017-12-05 12:23:14 |
| Document Title | Installation Guides |
| Document Creator | Adobe Acrobat 10.1.13 |
![1.1 DISPENSER INSTALLATION NOTES NOTE: SEE KEY DISPENSER DIMENSIONS BELOW (1.2). IF INSTALLING WITH DRIP CATCH OR ELBOW BAR, SEE CRmCAL DIMENSIONS BELOW (1.5 Drip·Catch and 2.2 Elbow Bar) 1. Remove key from back of housing. (Reference 'Key Location' in section 1.2, below) 2. The dispenser should be mounted 12 inches (30.5 em) above the counter-top, sink or other surface. 3. If replacing soap dispenser on wall, determine if any of the holes match up on the Sealed Air unit. Unit is designed to at least partially match numerous soap dispensers. 4. Mount the dispenser to wall using proper mounting hardware for your particular wall composition. Go to section 3.0 for specific dispenser mounting instructions. NOTE : TAPE & SCREWS/ANCHORS ARE PROVIDED FOR INSTALLATION. DISCLAIMER: If refills (Soap) used other than certified SA soap, SA is not responsible for any dispenser issues. 1.2 DIMENSIONS, KEY LOCATION, OPENING & CLOSING DISPENSER 1.3 REFILL PLACEMENT & REMOVAL **KEY OUTER DIMENSIONS OF DISPENSER : 1Hl10.24" 12fD'v1Ml x 1Wl6" I152.4MMJ x IDI4'' [101.6mml 10.24" {260mm) 6" {152.4mm) KEY LOCATION Remove cover key {a) from back of housing. 1.0 ML DOSE SETIING OPENING COVER Insert key into holes on top of cover then pull cover forward. 'click' • CLOSING COVER To close the cover, simply PUSH the top of cover closed to 'Click' shut {b). TO INSERT REFILL TO REMOVE REFILL Push refill into place to ensure the FLANGE of the Pull the Container {e) and the Pump Soap Nozzle {c) is seated into the correct location {d). Housing (f). Please recycle accordingly. If not, the dispenser will not pump correctly. 1.4 DOSE SIZE CONTROL GUIDE **To change dose setting, open dispenser cover and slide the red Dose Control Switch {a) to your desired dose size, Ensure you slide the Control Switch {a) ALL the way to the left or right. 0.4 ML DOSE SETIING SLIDE DOSE CONTROL SWITCH {a )TO THE LEFTFOR 1.0ML DOSE SETIING. SLIDE DOSE CONTROL SWITCH {a )TO THE RIGHT FOR 0.4ML DOSE SETIING. 1.5 OPTIONAL DRIP-CATCH INSTALLATION Insert drip catch hooks (a) through rectangular slots located at the backside of the dispenser. The Drip-Catch with SNAP into place. NOTE: The Drip Catch is not designed to be removed. However, if going to remove for cleaning please be careful not to damage the dispenser. The drip catch might be damaged after removing. DISCLAIMER: If other drip catch used, Sealed Air not responsible for damage. [ 409.22] 16.111](https://usermanual.wiki/Diversey/R37615-00/User-Guide-3663531-Page-2.png)