Dr ger Safety and KGaA FPSCOM7000 Firefighting Communication System User Manual 1902717463

Download:
Mirror Download [FCC.gov]
Document ID	2889645
Application ID	/1J+ESjVfebOsawM6rqZAQ==
Document Description	user manual annex
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.5kB (131251 bits)
Date Submitted	2016-01-29 00:00:00
Date Available	2016-01-29 00:00:00
Creation Date	2016-01-12 15:01:21
Producing Software	Acrobat Distiller 10.1.16 (Windows)
Document Lastmod	2016-01-12 15:29:09
Document Title	Microsoft Word - 1902717463.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	cadim21

Extract from Instruction for Use for FPS-COM 7000
(technical segment: “radio”, “EMC”)
Europe (EU):
EU Declaration of Conformity (accompanied by a copy of the EU declaration of conformity)
HINWEIS
Die abgebildeten Geräteaufkleber sind nur Beispiele. Die
jeweilige Klassifizierung ist auf dem Geräteaufkleber an der
Kommunikationseinheit aufgeführt
Schutzvermerk ISO 16016 beachten.
Use of this document / contents is forbidden
without expressed written authority. All rights reserved.
Dräger Safety
NOTICE
The device labels shown are intended as an example only.
The respective classification is indicated on the device label
on the communication unit.
Funkfrequenzen /
Radio frequencies
abgestarhlte Sendeleistung
(ERP) /
Effective radiated power
(ERP)
zugelassen in /
Approved in
863 MHz ... 865 MHz
(Teamfunk) / (Team radio)
915 MHz ... 928 MHz
(Teamfunk) / (Team radio)
2402 MHz ... 2480 MHz
(Bluetooth)
127 kHz
(LFC)
≤ 10 dBm
EU, TR, CY
≤ 10 dBm
AU, NZ
≤ 7 dBm
EU, US, CA, AU,
NZ
US, CA, AU, NZ
≤ -50 dBm
on the label:
“FPS COM 7000”
“863-865MHz”
Example:
USA/Canada:
“This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation.
Material / Werkstoff
Modification Text / Änderungstext
Amends / Kommt vor
0X
Scale / Maßstab
General Tolerance / Allgemeintoleranzen
=EX= =QS= =QF= Registration/
Ser.Type / Ser.art
------No/Nein
Created by/
Date / Datum
Bearbeitung
(dd.mm.yyyy)
Skrabs S
Description / Benennung
17.12.2015
Docum. / Erf.beleg
Doc.Type / Dok.art
No/Nein
Checked by /
Verantwortlich
Date / Datum
(dd.mm.yyyy)
Rüffert L
17.12.2015
FPS-COM 7000 Extract IFU
FPS-COM 7000 Extract IFU
Document Type / Dokumententyp
TEXT_DRAWING A4
Page / Seite
of / von
Total SL(tA) / Ges.halt.
Min.u.time(tG) / Min.n.d
Department /
Abteilung
st5430
DCC Number / Nummer
Status / Reifegrad
/ /
Prep
Part No. / Sachnummer – Rev / ÄZ
Appr./Zul.
SE23682 - 00
Repl. for / Ersatz für
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.”
“EMC” related :
“Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.”
Schutzvermerk ISO 16016 beachten.
Use of this document / contents is forbidden
without expressed written authority. All rights reserved.
Dräger Safety
on the label, USA requirement:
“FCC ID: X6O-FPSCOM7000”
“902-928MHz”
on the label, Canadian requirement:
“IC: 5895F-FPSCOM7000”
“902-928MHz”
“EMC” related :
“CAN ICES-3 (B) / NMB-3 (B)”
Australia:
on the label:
“FPS COM 7000”
“915-928MHz”
Example:
Description / Benennung
Status / Reifegrad
Prep
FPS-COM 7000 Extract IFU
FPS-COM 7000 Extract IFU
Document Type / Dokumententyp
Part No. / Sachnummer – Rev / ÄZ
SE23682 TEXT_DRAWING A4
Page / Seite
of / von
Repl. for / Ersatz für
00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : cadim21
Create Date                     : 2016:01:12 15:01:21+01:00
Modify Date                     : 2016:01:12 15:29:09+01:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : cadim21
Title                           : Microsoft Word - 1902717463.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:01:12 15:29:09+01:00
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Document ID                     : uuid:195ab9ed-fddd-405d-9dcc-3a8de300c535
Instance ID                     : uuid:3d5e1741-1426-4c3b-af7c-e30e8c2c63d2
Page Count                      : 2

EXIF Metadata provided by EXIF.tools