User Manual
Multishare 1.0 User Manual 1. About the Multishare 1.0 Enables contents in your phone, to be available to any external devices with USB connector, wirelessly without going through the cloud infrastructure. Existing device to device sharing solutions are still cumbersome,confusing, expensive and tied to specific brands/manufacturers. MultiShare USB is a WiFi Stick programmed in such way that it will be recognized as a memory stick when inserted to a USB port. Premium audio quality(AirPlay Dongle) Up to 20 smart phones may be connected. While being played, a playlist may be switched to the ones on different smart phones in less than 2 seconds. No need for charging or external power 2. Accessories – Car Audio Adaptor : To circumvent power management feature of some car audio models – User Manual • Before you use the Multishare 1.0, perform the following actions: Install App to use Multishare 1.0 - Android: Download “MultishareUSB App” from Play Store. - iPhone: Download “MultishareUSB App” from App Store. • Jak to connect with your smartphone Run the App Tap [CONNECT] Select Wi-Fi to connect Multishare 1.0 Tap[Connect] Enter Password. Activated Wi-Fi Default: 12345678 When reconnected, Multishare 1.0 connects automatically. • Add playlist Before using the App, you Tap [Add playlist] to create Select file format (Music, must create playlists. new playlist. Photo, Video, and Document) Tap [playlists]. Write a file name in below box. Select file format (Music, You can sort by Photo, Video, and Document) “Song”,”Artist”,”Albums” Write a file name in below box. Refer tofor further more information. • Using Multishare 1.0 (1) Using Multishare 1.0 from TV Plug MultiShare 1.0 into TV USB port. The LED light blinks at a regular interval when MultiShare 1.0 are successfully connected Run the App Tap[CONNECT] to connect Activated Wi-Fi Wi-Fi. Select Playlist. If you listen Tap [OK] to music, check music box. You can control all process through remote controller. ※ Refer to TV user manual for further information. ※ Control steps for music, video, picture and documents are same. (2) Multishare 1.0 to use from Audio Turn audio on. Plug Multishare 1.0 into audio USB port. Ensure that the LED light blinks. Run the app Tap[CONNECT] to connect Wi-Fi. Activate Wi-Fi Tap [Playlists] for listening to music. Select music playlist. Tap [OK] Check music box. Refer to the below table for icons Music plays automatically though Audio. You can control all process (volume control and select music) through Audio. (1) Using Multishare 1.0 from laptop ① MultiShare USB is a WiFi Stick programmed in such way that it will be recognized as a memory stick when inserted to a USB port. Ex : When connected with Galaxy Nexus, you can find “Galaxy Nexus”USB drive on your computer. ② Computer -> Galaxy Nexus”USB drives. Open folder and play documents. 3. Using the app (1) Edit playlists ▶ Delete photos Tap photo playlist Tap [Edit] Tap bin icon to delete selected picture. ▶ Zoom picture Tap photo playlist Tap [Edit] ※ Tap the arrows to watch the next picture. ※ a picture can rotate by tapping buttons on the top ▶ Add pictures Tap photo playlist. Tap [Edit] Tap [Add photos] Tap [+] button to pictures and tap [Done] add Check photos number in this playlist at the below on a screen. ▶ 사진 Playlist 비우기 ▶ Empty playlist Tap photo playlist Tap [Empty] Tap [OK] 10 You can check empty playlist ▶ Delete playlist Tap photo playlist Tap [Delete] Tap [OK] 11 Deleted photo playlist ▶ Delete music Tap music playlist Tap [Edit] Tap [-] and tap [Delete] 12 ※ you can move selected song by dragging the arrow. Control steps for music, video, picture and documents are same. ▶ Add music Tap music playlist Tap [Edit] Tap [Add songs] to add music. 13 Tap [+] to add songs. You can check current songs Selected songs color will number in this playlist. change black. ▶ Empty music playlist Tap music playlist Tap [Empty] Tap [OK] 14 You can check empty playlist ▶ Delete playlist Tap music playlist to delete Tap [Delete] Tap [OK] a playlist. 15 You can check deleted list. ▶ Delete video Tap video playlist Tap [Edit] Tap [-] and tap [Delete] to delete selected video file. 16 You can check current video number in this playlist. ▶ Add videos Tap video playlist Tap [Edit] Tap [Add Videos] to add videos. 17 Tap [+] to add video files. Tap [Done] Selected videos color will change black. ▶ Empty video Tap video playlist Tap [Empty] Tap [OK] to empty playlist. 18 You can check empty playlist ▶ 동영상 Playlist 삭제하기 ▶ Delete Playlist Tap video playlist Tap [Delete] Tap [OK] 19 ▶ Delete documents Tap document playlist Tap [Delete] Tap [-] and tap [Delete] to delete selected document file. You can check current document number in this playlist. 20 ▶ Add document Tap document playlist Tap [Edit] Tap [Add Files] to add documents. Select You can browse all files from You can browse all files Whether use Dropbox folder Drop box. from your Smartphone. or Smartphone folder 21 ▶ Empty playlist Tap music playlist Tap [Empty] Tap [OK] ▶ Delete document Tap document playlist Tap [Delete] Tap [OK] 22 4. Smartphone Status Up to 20 smart phones may be connected. While being played, a playlist may be switched to the ones on different smart phones in less than 2 seconds. When your phone connects to Wi-Fi, Antenna icon turns blue. If the Wi-Fi connection is fails, the device will default to the hotspot connection. disconnected Smartphone with USB device. Connected Smartphone Internet with USB device. Hotspot connection via 23 5. Setting Multishare 1.0 Tap [Change] and change Jak`s name and password. Check the box, when you use internet while connected with Jak And Check below options. Check the box, internet connection via Wi-Fi (AP) Tap this button to add Wi-Fi. Enter Wi-Fi name and password and Tap [Save] You can check saved Wi-Fi list. Press Wi-Fi for 2sencond you can modify name, password. If Wi-Fi connection is not available, check this box to activate hotspot. You can change hotspot`s name and password. 24 6. Update You can check current version at Basic Info menu. Tap [최신버전업데이트하기] when you need to update. 25 7. Hardware Specification. Features Hardware Specification Protocol IEEE 802.11b/g/n Frequency 2.4Ghz 20/40Mhz Interface : bandwidth Usb 2.0 clients LED wifi status Wireless MAC filtering Security 64/128/152 bit WEP encryption WPA-PSK/WPA2-PSK, WPA/WPA2 encryption Power input 5V usb port Operating temperature 0 ~ 40 C Storate temperature -20 ~ 60 C Humidity 10% to 90% RH non-condensing Storatge Humidity 5% to 90% non-condnesing Humidity 1T1R built-in pattern antenna Wireless Software Specification Behaves like a USB memory stick(FAT32 support) WiFi support(WPA-PSK/TIKIP support) protocol(version 1.0) support Multiple connection support 26 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. “This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.” Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 27
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Author :EXIF Metadata provided by EXIF.toolsCreate Date : 2012:10:25 17:33:25+09:00 Modify Date : 2012:10:25 17:41:10+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.5.2 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2012:10:25 17:41:10+09:00 Format : application/pdf Title : Microsoft Word - MANUAL Creator : Document ID : uuid:57bbf0ac-90eb-45e4-b622-4b54d555f9b4 Instance ID : uuid:14ca7aeb-3917-43e6-8a3d-cae6c23616a1 Page Count : 27