ETI Solid State Lighting 5407472018 LED ceiling lamp User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4104703
Application ID	sUhF+Mrbwr8NjLkYkYAtFg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.77kB (784644 bits)
Date Submitted	2018-12-13 00:00:00
Date Available	2018-12-13 00:00:00
Creation Date	2018-12-11 15:32:38
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2018-12-11 15:59:34
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 11 Word 版
Document Author:	zhangweiguo

ELEC-TECH INTERNATIONAL CO., LTD.
Product Instruction Manual
Product Name: LED ceiling lamp
Model No.： 540747##（##＝00-99）
Manufacturer: ETI Solid State Lighting (Zhuhai) Ltd
Address: No.1, Zhongzhu Road South,Science & Technology Innovation Coast,
High Tech District, Zhuhai City, Guangdong Prov., China
Page 1 of 11
Contents
1. Product Introduction.................................................................................................................................... 3
1.1. Product Description ................................................................................................................................. 3
1.2. Product schematic diagram: ...................................................................................................................... 3
2. Product Featuers: ....................................................................................................................................... 3
2.1. Product characteristics ： ........................................................................................................................ 3
2.2 Specification ............................................................................................................................................ 4
2.3 Light distribution （Light distribution pattern） ........................................................................................ 4
（I luminance distribution ） ...................................................................................................................... 4
3．Installation Instructions.............................................................................................................................. 5
4．Maintenance instruction ............................................................................................................................ 9
5．Environment requirement .......................................................................................................................... 9
6．Package Carried Standard ........................................................................................................................ 9
7. Package Instruction.................................................................................................................................. 10
7.1 Packing Specification.......................................................................................................................... 10
7.2 Package list........................................................................................................................................ 10
Page 2 of 11
1. Product Introduction
1.1. Product Description
Dimension: Φ305x91mm
Lamp plate : SPCC Powder spray, lamp cover:PMMA optical diffuser
built-in drive&fire prevention drive box
SUM-LED-2835
1.2. Product schematic diagram
2. Product Featuers
2.1. Product characteristics ：
a. Long lifetime (above 50,000hrs), 7 times of lifetime of fluorescent lamp:
b. High efficiency, energy saving, environmental friendly (A 14W led lamp can replace a 60 w electric
incandescent lamp , saving 60% of energy )
c. Impact resistant, shock resistant, no UV and IR radiation: high conversion rate and adaptable to severe
environment , universal application to office ,hotel ,supermarket ,school and library ,etc
d. Green Initiative, no harmful gas is emitted, low heat is generated while used, safe and reliable .
e. Authentic and pure light color, no flicker, protecting your eyes while providing better visual enjoyment .
Page 3 of 11
2.2 Specification
Item
Electronic ratings
Rated Power/W
Rated Input voltage/V
Frequency/Hz
Rated Power efficiency
Rated Power Factor（PF）
Rated Input current/A
Rated I‐ THD
Whether the dimming
RatedR9
Photometric ratings
LED type/Qty.
Rated Lumen Output
Illuminance(1.5m)/Lux
Parameter
15W
AC120V
60Hz
87%
＞0.7
0.125A
<20%
No
>0
SMD2835 /88PCS
1600lm
KCCT
4000K
Ra CRI
Beam Angle
Physical information
Material
operating temperature
storage temperature
IP rating
(Luminaire dimension(L×W×H)/mm
Net weight/g
Lifetime/hrs
≥80
≥120
SPCC+PMMA
‐ 20～45℃
‐ 40～60℃
IP20
Φ305x91
50000h
2.3 Light distribution （Light distribution pattern）
（I luminance distribution ）
Page 4 of 11
3．Installation Instructions
1. Put the Fixture flat on the desktop, turn the lamp shade counterclockwise , and then take out the lamp
shade 。
2. If necessary, according to the actual needs, choose to set the microwave induction distance(for details on height
and manner of installation, see Radar Sensor Specification), time, trigger the brightness of induction.
2.1 The factory setting is:
Detection range of 75% / waiting time of 5 minutes / light failure (that is, regardless of day and night, it was all
bright, people left after the delay off)
2.2 This sensor is a mo󲐀on switch, turns on the light on detec󲐀on of movement, and turns off a󲐀er a pre-selected
hold-󲐀me when no
movement around. A daylight sensor is also built-in to prevent the light from switching on when there is sufficient
natural light.
2.2.1With sufficient natural light, the light does not switch on when presence detected.
Page 5 of 11
2.2.2 With insufficient natural light, it switches on the light automat when person enters the room.
2.2.3 The sensor switches off the light automatically off. When there is no person detected.
2.3 Detection pattern
Page 6 of 11
2.4 Settings
3. Install the electrical box screws（#8-32UNC） in the junction box.
Page 7 of 11
4. Connect the black color L line(Mark 1) to the L line come out from junction box with the wirecap. Connect the
white color N line(Mark 2) to the N line come out from junction box with the wirecap. Connect green color
ground line(Mark 3) to the ground line come out from junction box with the wirecap.
5. Put the central holes of the fixture plate across the screw of the junction box.
6. Rotate fixture plate per the direction of arrow and lock it tightly with the screw lock
Page 8 of 11
7. Reinstall the lens to fixture and make sure the lens is fastened to the fixture.
8. Turn on power
4．Maintenance instruction
4.1
Do Not use volatile solvent such as alcohol to clean the troffer.
4.2
Use soft cotton cloth with suds to clean the troffer .
4.3
Non-profecssional Do not attempt to take apart and repair the troffer .
4.4 Please use the constant-current driver exclusively adaptive to the troffer, do not change the driver without
permission .
5．Environment requirement
Operating temperature ：-20～45℃；Storage temperature ：-40～60℃。
6．Package Carried Standard
UL-1598/UL8750/ ENERGY STAR
Page 9 of 11
7. Package Instruction
7.1 Packing Specification
7.2 Package list
Package size
Lamp Qty./box
mm
Set/box
Net weight
Gross weight
Item
Qty.
Ceiling lamp
Instruction manual
screw
Wiring cap
Page 10 of 11
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
IC STATEMENT
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
RF Exposure
The device has been evaluated to meet general RF exposure requirement. The device can be used in fixed/mobile
exposure condition without restriction. This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Page 11 of 11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : zhangweiguo
Comments                        : 
Company                         : 
Create Date                     : 2018:12:11 15:32:38+08:00
KSO Product Build Ver           : 2052-10.1.0.7520
Modify Date                     : 2018:12:11 15:59:34+08:00
Source Modified                 : D:20181130105021
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Metadata Date                   : 2018:12:11 15:59:34+08:00
Creator Tool                    : Acrobat PDFMaker 11 Word 版
Document ID                     : uuid:6c6ae031-5194-485c-8345-a9815b6f2a5d
Instance ID                     : uuid:a83e1a6a-b7d6-4ebb-a44e-3ecd510effce
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D203534333032313431B2FAC6B7CBB5C3F7CAE92DB7C0D5F0BCD0B0B2D7B02BB5F5D7B0A3A8D6D0D3A2CEC4A3A932>
Description                     : 
Creator                         : zhangweiguo
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 11

EXIF Metadata provided by EXIF.tools