Electronic Systems Technology ESTEEM195ES Wireless Ethernet Radio Modem User Manual Apx B Specifications
Electronic Systems Technology Wireless Ethernet Radio Modem Apx B Specifications
Contents
Users Manual Appednix B Revision 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 800985 |
| Application ID | G0Q9gppsR66VzpZSuz401g== |
| Document Description | Users Manual Appednix B Revision 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 28.76kB (359546 bits) |
| Date Submitted | 2007-06-06 00:00:00 |
| Date Available | 2007-06-06 00:00:00 |
| Creation Date | 2007-06-06 08:42:01 |
| Producing Software | Acrobat PDFWriter 5.0 for Windows NT |
| Document Lastmod | 2007-06-06 17:27:50 |
| Document Title | Apx B - Specifications.doc |
| Document Creator | Microsoft Word - Apx B - Specifications.doc |
| Document Author: | Front Office |
APPENDIX B SPECIFICATIONS Model 195Es Case Specifications LED Indicators Power On/Off Carrier Detect On/Off Receiver On/Off Transmitter On/Off Link Status On/Off I/O Connectors Ethernet 10/100Base T (Port 1) Ethernet 10/100Base T (Port 2) RS-232C Port (2,400 to 115.2K baud) RS-232C Programming Port (38.4 K baud) Antenna Input/Output RJ-45 Female RJ-45 Female RJ-45 Female RJ-45 Female TNC Reverse Polarity Female Remote Input Power Power Over Ethernet Cable Direct Input Power Optional, Header Screw Connector Transmiter 902 to 928 MHz Software Selectable Frequency of Operation RF Data Rates 200 Kbps Tx Output Power 1 Watt RF Output Impedance 50 ohms Receiver Rx Sensitivity @ Frame Error Rate <10% -98 dBm @ 200 Kbps Power Power over Ethernet Power Connector on Unit Receive Transmit Case Dimensions Weight Outdoor Pole Mounting Kit IEEE 802.3af Standard Power Supply, 48 VDC @ 13 Watts 10 to 16 VDC 220 ma @ 12 VDC 1000 ma @ 12 VDC 1.9 in. H x 6.7 in. W x 6.2 in. L 1.25 lbs. Optional, EST P/N 195PM Other Warranty Temperature Range Humidity FCC Type Acceptance Industry Canada Type Acceptance 1 Year -30° to +60° C 95% Non-condensing Pending Pending Specifications Subject to Change Without Notice APPENDIX B SPECIFICATIONS Model 195Es Case Specifications APPENDIX B SPECIFICATIONS Antenna Specifications Model No: Antenna Type: Applications: Frequency: Polarization: Impedance: Gain: VSWR: Front to Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Mounting Hardware: Antenna Connector: Antenna Envelope: Weight: AA191s Omni-Directional, Permanent Vehicle Mount Direct mount 896 to 940 MHz Caution Vertical 50 ohms Omni-directional antenna 5 dB should not be located within 23 cm of personnel. < 1.5 to 1 n/a n/a n/a Molded Polymer Included TNC-R Male 32 in. length <1 lbs. Model: AA20DMEs Applications: Model 195Es direct case mount Antenna Type: Omni-Directional, Sleeve dipole Frequency: 902 to 928 MHz Polarization: Vertical Impedance: 50 ohms Gain: 2 dBi (3 dBd) VSWR: < 2:1 Power: 10 W Front To Back Ratio: n/a Horizontal Beamwidth: n/a Vertical Beamwidth: 60 degrees Antenna Material: Polyurethane Plastic Radome Recommended Mounting Hardware: n/a Antenna Connector: TNC-R Male Flexibility: +/- 20 ° Antenna Envelope: 8.8 in. length by .51 in. width Temperature: -20 to +65 C° Weight: 35 grams Model AA191s Caution Omni-directional antenna should not be located within 23 cm of personnel. Model AA20DMEs Revised: 20 Feb 07 APX B-3 EST P/N AA107S APPENDIX B SPECIFICATIONS Antenna Specifications Model No: Antenna Type: Applications: Frequency: Polarization: Impedance: Gain: VSWR: Front to Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Mounting Hardware: Maximum Power Input: Wind Survival: Bending Moment: Antenna Connector: Antenna Envelope: Weight: AA20Es900 Omni Directional, DC Grounded Fixed base 902 to 928 MHz Vertical 50 ohms 7 dBi (5dBd) 1.5:1 Typical n/a n/a 22 degrees @ ½ power Brass radiator, UV inhibited fiberglass enclosed Base to Mast, Supplied. 150 Watts 100 mph 14.2 ft-lbs. @ 100 mph TNC-R Male with 36in. pig-tail. 48 in. L x 1-5/16 in. Dia. 1.75 lbs. Caution To comply with the FCC exposure compliance requirements, a separation distance of at least 23 cm must be maintained between the antenna and all persons. Mounting Bracket Model AA20Eg Revised: 20 Feb 07 APX B-4 EST P/N AA107S APPENDIX B SPECIFICATIONS Antenna Specifications Model No: Antenna Type: Applications: Frequency: Polarization: Impedance: Gain: VSWR: Front to Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Mounting Hardware: Antenna Connector: Maximum Power Input: Antenna Envelope: Windload (RWV): Wind Surface Area: Weight: AA203Es900 Directional, DC grounded Fixed base. 902 to 928 MHz Vertical or Horizontal 50 ohms 7 dBi (5 dBd) < 1.5:1 Nominal > 16 dB 130 degrees @ ½ power 70 degrees @ ½ power Aluminum Heavy duty U bolts for mounting up to 2.0 in. pipe (included). TNC-R Male with 2 ft. pigtail with ESTeem weatherproof boot. 50 Watts 1.1 ft. length by 6 in. width 150 mph .11 ft² 1 lbs. Caution To comply with the FCC exposure compliance requirements, a separation distance of at least 23 cm must be maintained between the antenna and all persons. Model AA203Eg Revised: 20 Feb 07 APX B-5 EST P/N AA107S
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2007:06:06 08:42:01Z Creator Tool : Microsoft Word - Apx B - Specifications.doc Modify Date : 2007:06:06 17:27:50-04:00 Metadata Date : 2007:06:06 17:27:50-04:00 Format : application/pdf Creator : Front Office Title : Apx B - Specifications.doc Producer : Acrobat PDFWriter 5.0 for Windows NT Document ID : uuid:67e3eefb-0e8b-4b72-a364-314c34ba2b24 Instance ID : uuid:d276e304-6938-472c-89f1-89a55c959943 Page Count : 5 Author : Front OfficeEXIF Metadata provided by EXIF.tools