Electronic Systems Technology ESTEEM195ES Wireless Ethernet Radio Modem User Manual Apx B Specifications

Electronic Systems Technology Wireless Ethernet Radio Modem Apx B Specifications

Users Manual Appednix B Revision 2

APPENDIX BSPECIFICATIONSModel 195Es Case SpecificationsLED IndicatorsPower On/Off Receiver On/OffCarrier Detect On/Off Transmitter On/OffLink Status On/OffI/O ConnectorsEthernet 10/100Base T (Port 1) RJ-45 FemaleEthernet 10/100Base T (Port 2) RJ-45 FemaleRS-232C Port(2,400 to 115.2K baud) RJ-45 FemaleRS-232C Programming Port (38.4 Kbaud) RJ-45 FemaleAntenna Input/Output TNC Reverse Polarity FemaleRemote Input Power Power Over Ethernet CableDirect Input Power Optional, Header Screw ConnectorTransmiterFrequency of Operation 902 to 928 MHzSoftware SelectableRF Data Rates 200 KbpsTx Output Power 1 WattRF Output Impedance 50 ohmsReceiverRx Sensitivity @ Frame Error Rate <10% -98 dBm @ 200 KbpsPowerPower over Ethernet IEEE 802.3af Standard Power Supply,48 VDC @ 13 WattsPower Connector on Unit 10 to 16 VDCReceive 220 ma @ 12 VDCTransmit 1000 ma @ 12 VDCCaseDimensions 1.9 in. H x 6.7 in. W x 6.2 in. LWeight 1.25 lbs.Outdoor Pole Mounting Kit Optional, EST P/N 195PMOtherWarranty 1 YearTemperature Range -30° to +60° CHumidity 95% Non-condensingFCC Type Acceptance PendingIndustry Canada Type Acceptance PendingSpecifications Subject to Change Without Notice
APPENDIX BSPECIFICATIONSModel 195Es Case Specifications
APPENDIX BSPECIFICATIONSAntenna SpecificationsRevised: 20 Feb 07 APX B-3EST P/N AA107SModel No: AA191sAntenna Type: Omni-Directional, Permanent Vehicle MountApplications:Direct mountFrequency: 896 to 940 MHzPolarization: VerticalImpedance: 50 ohmsGain: 5 dBVSWR: < 1.5 to 1Front to Back Ratio: n/aHorizontal Beamwidth: n/aVertical Beamwidth: n/aAntenna Material: Molded PolymerMounting Hardware: IncludedAntenna Connector:TNC-R MaleAntenna Envelope: 32 in. lengthWeight: <1 lbs.Model: AA20DMEsApplications: Model 195Es direct case mountAntenna Type: Omni-Directional, Sleeve dipoleFrequency: 902 to 928 MHzPolarization: VerticalImpedance: 50 ohmsGain: 2 dBi (3 dBd)VSWR: < 2:1Power: 10 WFront To Back Ratio: n/aHorizontal Beamwidth: n/aVertical Beamwidth: 60 degreesAntenna Material: Polyurethane Plastic RadomeRecommended Mounting Hardware: n/aAntenna Connector: TNC-R MaleFlexibility: +/- 20 °Antenna Envelope: 8.8 in. length by .51 in. widthTemperature: -20 to +65 C°Weight: 35 gramsModel AA191sModel AA20DMEsCautionOmni-directional antennashould not be located within23 cm of personnel.CautionOmni-directional antennashould not be located within23 cm of personnel.
APPENDIX BSPECIFICATIONSAntenna SpecificationsRevised: 20 Feb 07 APX B-4EST P/N AA107SModel No: AA20Es900Antenna Type: Omni Directional, DC GroundedApplications:Fixed baseFrequency: 902 to 928 MHzPolarization: VerticalImpedance: 50 ohmsGain: 7 dBi (5dBd)VSWR: 1.5:1 TypicalFront to Back Ratio: n/aHorizontal Beamwidth: n/aVertical Beamwidth: 22 degrees @ ½ powerAntenna Material: Brass radiator, UV inhibitedfiberglass enclosedMounting Hardware: Base to Mast, Supplied.Maximum Power Input: 150 WattsWind Survival: 100 mphBending Moment: 14.2 ft-lbs. @ 100 mphAntenna Connector:TNC-R Male with 36in. pig-tail.Antenna Envelope: 48 in. L x 1-5/16 in. Dia.Weight: 1.75 lbs.Mounting BracketModel AA20EgCautionTo comply with the FCCexposure compliancerequirements, a separationdistance of at least 23 cmmust be maintained betweenthe antenna and all persons.
APPENDIX BSPECIFICATIONSAntenna SpecificationsRevised: 20 Feb 07 APX B-5EST P/N AA107SModel No: AA203Es900Antenna Type: Directional, DC groundedApplications:Fixed base.Frequency: 902 to 928 MHzPolarization: Vertical or HorizontalImpedance: 50 ohmsGain: 7 dBi (5 dBd)VSWR: < 1.5:1 NominalFront to Back Ratio: > 16 dBHorizontal Beamwidth: 130 degrees @ ½ powerVertical Beamwidth: 70 degrees @ ½ powerAntenna Material: AluminumMounting Hardware: Heavy duty U bolts for mounting up to 2.0 in. pipe(included).Antenna Connector:TNC-R Male with 2 ft. pigtail with ESTeem weatherproofboot.Maximum Power Input: 50 WattsAntenna Envelope: 1.1 ft. length by 6 in. widthWindload (RWV): 150 mphWind Surface Area: .11 ft²Weight: 1 lbs.Model AA203EgCautionTo comply with the FCCexposure compliancerequirements, a separationdistance of at least 23 cmmust be maintainedbetween the antenna and allpersons.

Navigation menu