Ericsson LG LSP450 CDMA Fixed Wireless Terminal User Manual 1

Ericsson-LG Co., Ltd. CDMA Fixed Wireless Terminal Users Manual 1

Contents

Users Manual 1

CDMA Fixed Wireless PhoneL S P - 4 5 0 U s e r G u i d ePlease read this manual carefully before operating your set.Retain it for future reference.P/NO : MMBB9223301MAR/2009/ISSUE 1.1
1IntroductionIntroduction1. Introduction1.1 Front View of the Phone① Menu : Activates Main Menu state.② Clear : Deletes the last digit, or moves previous Menu.③ OK : Used to store an entry or to accept a command.④ Up Key (+) : Moves up in the Menu or Volume Up.⑤ Down Key (–) : Moves down in the Menu or Volume Down.⑥ END/PWR : Deactivates states, or Power ON/OFF.⑦ Redial/Flash : Activates Redial/Flash state, or views CallHistory.⑧ ( ) : Activates hands free function.⑨ ‘*’ : Inputs Symbol ‘*’, or makes a phone input ‘SPACE’ duringtext entry operation. ⑩ ‘#’ : Inputs Symbol ‘#’, or makes a phone lock after long- press.⑪ Attached Antenna.+-MenuCOK① ② ③ ④⑤⑥⑧⑦⑨ ⑩⑪
2IntroductionIntroduction1.2 LCD DisplayThe LCD shows icons on the top of the LCD screen.Different indicators appear based on the phone's operating mode.Icon Operating ConditionRSSI Indicator : Indicates the signal strength in the service area.No Service : The phone is not receiving any system signal.In Use : Displayed when a call is in progress or the phone is in off-hook state.Text Message : Displayed when a text message is received.Voice Message : Displayed when voice message is received.Alarm : Displayed when alarm time is set.Roaming : Indicate the roaming service area.Battery Charge Level : Indicates charged battery level.1.3 InstallationYou should follow each step carefully as shown below in order to guarantee the proper operation of CDMA Fixed Wireless Phone.+-MenuCOKGSM Fixed Wireless PhoneL S P - 4 5 0 U s e r G u i d ePlease read this manual carefully before operating your set.Retain it for future reference.P/NO : MMBB9223301MAR/2009/ISSUE 1.1Main Phone Dipole Antenna AC/DC Power Adapter User Guide
3STEP I. Check ComponentsIntroductionIntroduction▶The following components are supplied Fixed Wireless Phone.1. LSP-450 Main Phone with Handset (Including inner backup battery) -1EA-2. Dipole Antenna- -1EA-3. AC/DC Power Adapte -1EA-4. User Guide -1EA-▶Please make sure that these components are present before youbegin to install the phone. If any of the components are missing or damaged,contact your service provider immediately.STEP II. Place the Terminal▶Place the phone on the stable flat surface area (desk, table, etc).Serious damage may result if the phone is dropped. Do not placethe phone within 1 meter of heaters or radiators.▶This phone is designed for desktop usage. Avoid the directexposure to sunlight and dampness.▶Read the SAFETY INFORMATION located in the first part of thisdocument before you lace the phone.STEP III. Connect Components(Please refer to “Installation Steps” in 1.4)▶Connect the antenna to the TNC antenna connector located atthe top of the phone.▶If you have placed the phone on a flat surface, position theantenna upright.▶Connect the curl cord of the handset to the RJ-11 port locatedon the left side of the phone.▶Connect the AC/DC Adapter cable to the DC input port locatedat the top of the phone.- If it is correct, a beep tone will be heard.- If it is not correct (Booting fails or beep tone is not heard), you willhave to reconnect the adapter or reset the battery.▶Please observe the following to get better voice quality.1. Keep away from electrical appliances such as TV, computer, radioetc.2. Keep the phone in a high and central location without anyobstructions.3. Raise the integral antenna of the phone to get maximum strengthas shown in the figure.
4IntroductionIntroduction1.4 Installation StepsPlease follow the procedure below to install the phone properly.STEP IV. Check the LCD Display▶After you follow the installation instruction step I to step III,please check the LCD for normal operation.▶If you do not see the status of service, please repeat the 4thinstruction of step III.▶Then confirm the status of phone to get the proper signalstrength from the service operator system.1234+-MenuCOK5Connect basehandset to the handset connector.Connect the antenna to the TNC connector (Turn right).Turn the antenna upright. Connect the AC power supply.Press button to operate initially.
52. Basic Operation2.1 Making a CallYou can make a call as follows:1. Pick up the handset or press button.2. Listen for dial tone and enter the phone number.3. Wait for the Auto Time-out or Press button.4. The call is connected and you may start conversation.5. To disconnect the call, replace the handset or press button.2.2 Redialing Last Number1. Pick up the handset or press button.2. Listen for dial tone.3. Press button.4. The call is connected and you may start conversation.5. To disconnect the call, replace the handset or press button.2.3 3-way Call ConferencingMethod 11. Enter the phone number of the 2nd party phone while you are intelephonic conversation with 1st party.2. Press button. And press buttonagain. Method 21. Press button while you are in telephonic conversation with 1st party.2. If you listen to the dialing tone, Press the phone number of the2nd party phone.3. Press button. And press button again.This service should be provided by your service provider.END/PWRDial/FlashRedial/FlashRedial/FlashRedial/FlashRedial/FlashRedial/FlashRedial/Flash2.4 Call Wait1. Press button, you may start conversation with called number.2. Re-press button, you may start conversation with previous number.2.5 Volume Control1. Press button of navigation while in a call, to adjust speaker volume.2. Press + 1( ) to prevent sound from yourend during the call. To cancel Mute, Press again +1( ).3. Press + 4( ) during a call and select Low or High by pressing button, to adjust MIC volume.Up/DownMenu Mute/UnmuteMenu Mute/UnmuteMenu MIC LevelUp/DownBasic OperationBasic Operation
6Basic OperationBasic Operation2.6 Receiving a CallWhen the bell rings in idle state, you can receive a call as follows:1. Pick up the handset or press the button.2. Start a conversation. To disconnect the call, replace the handsetor press the button.2.7 MemoAllow you to store number during the call.To store number :1. Press + 2( ).2. Enter up to 32 numbers using the keypad.3. Press key to save.To retrieve an In Call Memo :1. Press button to see saved number.Redial/FlashMenu MemoOK2.8 Lock Mode1. Press ‘#’ button for some time. The phone is now locked. Tounlock, press and enter lock code (Default “0000”).Also you can lock your phone manually. If you need to modify thelock code, you may modify it using the within the security menu.MenuNew Lock Code
7Menu TreeMenu Tree3.1 PHONE BOOKUp to 300 entries can be listed here.To store phone number :1. Enter the area code and phone number (Max. 32 digits) in on-hook state.2. Press key and enter name.3. Enter the desired memory location.4. The phone will display a message asking you whether to keepyour number as secret or not. Select or using button and press key.OKNO Yes Up/DownOK3.1.1 Find1. Press + 1( ) + 1( ) in on-hookstate.2. Select a desired search Menu.▶ Address, Name, Number : Enter full or part of name (number),select .3. Select desired item.▶ key : can edit item.▶ : can delete item.Menu PHONEBOOK FindOKOKRedial/Flash3.1.2 AddYou can save up to 300 entries in your LSP-450 phonebook.1. Press + 1( ) + 2( ) in on-hookstate.Menu PHONEBOOK Add3.1.3 Erase All1. Press + 1( ) + 3( ) in on-hookstate.Menu PHONEBOOK Erase All3.2 MESSAGESThe phone can store up to 50 messages in each Inbox and Outbox. If you press Key, SMS Menu is activated.In the list of Inbox, all sorts of the icon have the meaning as follows :! : Unread message V : Read messageIn Inbox, the meaning of (5/37) beside Inbox is that 5 out of 37messages are unread.OK3.2.1 Write1. Press + 1( ) in on-hook state.2. Enter phone number or press to search from phonebook.3. Write messages. 4. Press key to send message.OK WriteRedial/FlashOK3.2.2 Inbox1. Press + 2( ) + in onhook state.2. To delete desired message, select key.3. To view desired message, select .4. Press to reply, forward, erase a message or save thesender’s number in the phone-book.OK InboxRedial/FlashOKMenu
8Menu TreeMenu Tree3.2.3 SMS 82821. Press + 3( ) in on-hook state.2. You may select from nine items (1. What’s New? / 2. News / 3. Cricket / 4. Astrology / 5. Win Prizes / 6. Stocks / 7. Fun / 8. LifeStyle / 9. More ).OK SMS 82823.2.4 OutboxAll your successfully sent messages are saved here.1. Press + 4( ) in on-hook state.OK Outbox3.2.5 Voice Mail1. Press + 5( ) in on-hook state.2. Pick up the handset or press button to make a call back yourvoice mailbox if the number of the voice mailbox is provided bythe telecom service company’s system.OK Voice MailEND/PWRDial/Flash3.2.6 Erase MessagesYou may erase all messages from three options (1: Inbox & Voice / 2: Outbox / 3: All Messages).1. Press + 6( ) in on-hook state.OK Erase Messages3.2.7 MSG SettingsPriority1. Press +7( ) + 1( ) in on-hook state.OK MSG Settings Priority2. You may select from three options (Normal / Urgent /Emergency).Delivery ACK1. Press + 7( ) + 2( ) in on-hook state.Defer Delivery1. Press + 7( ) + 3( ) in on-hook state.Valid Period1. Press + 7( ) + 4( ) in on-hook state.Save Sent MSG1. Press + 7( ) + 5( )i n on-hook state.Auto Del. Inbox1. Press + 7( ) + 6( ) in on-hook state.OK MSG Settings Delivery ACKOK MSG Settings Defer DeliveryOK MSG Settings Valid PeriodOK MSG Settings Save Sent MSGOK MSG Settings Auto Del. Inbox3.3 CALL HISTORYThe phone can store up to 30 Missed, 30 Received, 30 Dialled calls,and 30 In Call Memo in Call History.All sorts of the icons have the meaning as follows :- Received : - In call Memo : - Dialled : - Call Waiting : - Missed : - 3-Way Call :!C!C!C!C!C!C
9Menu TreeMenu Tree3.3.1 All Call1. Press + 3( ) + 1( ) or button.2. To view desired item, press key.3. To erase desired number, press key.4. After you press key, press key to see more information and press key to save the number in the phonebook.Menu CALL HISTORY All CallRedial/FlashOKRedial/FlashOK OKOK3.3.2 Missed1. Press + 3( ) + 2( ) in on-hookstate.Menu CALL HISTORY Missed3.3.3 Received1. Press + 3( ) + 3( ) in on-hookstate.Menu CALL HISTORY Received3.3.4 Dialled1. Press + 3( ) + 4( ) in on-hookstate.Menu CALL HISTORY Dialled3.3.5 In Call Memo1. Press + 3( ) + 5( ) in on-hookstate.Menu CALL HISTORY In Call Memo3.3.6 Call DurationLast Dialled1. Press + 3( ) + 6( ) in on-hookstate.Menu CALL HISTORY Call DurationAll Dialled1. Press + 3( ) + 6( )+ 2( ) in on-hookstate.All Calls1. Press + 3( ) + 6( )+ 3( ) in on-hookstate.Reset1. Press + 3( ) + 6( )+ 4( ) in on-hookstate.Menu CALL HISTORY Call DurationAll DialledMenu CALL HISTORY Call DurationAll CallsMenu CALL HISTORY Call DurationReset3.3.7 Erase HistoryYou may erase all history from five options (1: Erase All Call / 2:Erase Missed / 3: Erase Received / 4: Erase Dialled / 5: Erase Memo).1. Press + 3( ) + 7( ) in on-hookstateMenu CALL HISTORY Erase History3.4 SOUND3.4.1 Ring Type1. Press + 4( ) + 1( ) in on-hookstate.2. Select one of the following : (Ring/One-Beep/Light)Menu Ring TypeSOUND3.4.2 Ring Tone1. Press + 4( ) + 2( ) in on-hookstate.Menu SOUND Ring Tone

Navigation menu