Ericsson LG LSP450 CDMA Fixed Wireless Terminal User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1088712
Application ID	h/1+RC2xA2herRfOzKaAWg==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.65kB (1120612 bits)
Date Submitted	2009-03-31 00:00:00
Date Available	2009-03-31 00:00:00
Creation Date	2009-03-25 10:52:46
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2009-03-25 10:53:00
Document Title	Users Manual 1
Document Creator	Adobe InDesign CS2 (4.0.5)

CDMA Fixed Wireless Phone
LSP-450
User Guide
Please read this manual carefully before operating your set.
Retain it for future reference.
P/NO : MMBB9223301
MAR/2009/ISSUE 1.1
Introduction
1. Introduction
①
②
③ ④
⑪
⑦
Menu
OK
⑨
⑩
⑥
① Menu : Activates Main Menu state.
② Clear : Deletes the last digit, or moves previous Menu.
③ OK : Used to store an entry or to accept a command.
④ Up Key (+) : Moves up in the Menu or Volume Up.
⑤ Down Key (–) : Moves down in the Menu or Volume Down.
⑥ END/PWR : Deactivates states, or Power ON/OFF.
⑦ Redial/Flash : Activates Redial/Flash state, or views
CallHistory.
⑧ ( ) : Activates hands free function.
⑨ ‘*’ : Inputs Symbol ‘*’, or makes a phone input ‘SPACE’
duringtext entry operation.
⑩ ‘#’ : Inputs Symbol ‘#’, or makes a phone lock after longpress.
⑪ Attached Antenna.
Introduction
1.1 Front View of the Phone
⑧⑤
Introduction
1.2 LCD Display
Introduction
The LCD shows icons on the top of the LCD screen.
Different indicators appear based on the phone's operating mode.
Icon
Operating Condition
RSSI Indicator : Indicates the signal strength in the service area.
No Service : The phone is not receiving any system signal.
In Use : Displayed when a call is in progress or the phone is in off-hook
state.
Text Message : Displayed when a text message is received.
Voice Message : Displayed when voice message is received.
Alarm : Displayed when alarm time is set.
Roaming : Indicate the roaming service area.
Battery Charge Level : Indicates charged battery level.
1.3 Installation
You should follow each step carefully as shown below in order to guarantee the proper operation of CDMA Fixed
Wireless Phone.
GSM Fixed Wireless Phone
LSP-450
User Guide
Please read this manual carefully before operating your set.
Retain it for future reference.
Menu
OK
P/NO : MMBB9223301
MAR/2009/ISSUE 1.1
Main Phone
Dipole Antenna
AC/DC Power Adapter
User Guide
Introduction
STEP III. Connect Components
▶The following components are supplied Fixed
Wireless Phone.
1. LSP-450 Main Phone with Handset
(Including inner backup battery) -1EA2. Dipole Antenna-			
-1EA3. AC/DC Power Adapte		
-1EA4. User Guide			
-1EA▶Please make sure that these components are
present before youbegin to install the phone. If any
of the components are missing or damaged,contact
your service provider immediately.
(Please refer to “Installation Steps” in 1.4)
STEP II. Place the Terminal
▶Place the phone on the stable flat surface area
(desk, table, etc).Serious damage may result if the
phone is dropped. Do not placethe phone within
1 meter of heaters or radiators.
▶This phone is designed for desktop usage. Avoid
the directexposure to sunlight and dampness.
▶Read the SAFETY INFORMATION located in the
first part of thisdocument before you lace the phone.
▶Connect the antenna to the TNC antenna connector
located atthe top of the phone.
▶If you have placed the phone on a flat surface,
position theantenna upright.
▶Connect the curl cord of the handset to the RJ-11
port locatedon the left side of the phone.
▶Connect the AC/DC Adapter cable to the DC input
port locatedat the top of the phone.
- If it is correct, a beep tone will be heard.
- If it is not correct (Booting fails or beep tone is not
heard), you willhave to reconnect the adapter or
reset the battery.
▶Please observe the following to get better voice
quality.
1. Keep away from electrical appliances such as TV,
computer, radioetc.
2. Keep the phone in a high and central location
without anyobstructions.
3. Raise the integral antenna of the phone to get
maximum strengthas shown in the figure.
Introduction
STEP I. Check Components
Introduction
STEP IV. Check the LCD Display
Introduction
▶After you follow the installation instruction
step I to step III,please check the LCD for
normal operation.
▶If you do not see the status of service, please
repeat the 4thinstruction of step III.
▶Then confirm the status of phone to get the
proper signalstrength from the service operator
system.
1.4 Installation Steps
Please follow the procedure below to install the phone properly.
Connect basehandset to the
handset connector.
Turn the antenna upright.
Menu
OK
Press
initially.
button to operate
Connect the antenna to the TNC
connector (Turn right).
Connect the AC power
supply.
Basic Operation
2. Basic Operation
2.1 Making a Call
Dial/Flash
END/PWR
2.2 Redialing Last Number
1. Pick up the handset or press
button.
2. Listen for dial tone.
3. Press Redial/Flash button.
4. The call is connected and you may start conversation.
5. To disconnect the call, replace the handset or press
button.
2.3 3-way Call Conferencing
Method 1
1. Enter the phone number of the 2nd party phone while
you are intelephonic conversation with 1st party.
2. Press Redial/Flash button. And press buttonagain.
1. Press Redial/Flash button while you are in telephonic
conversation with 1st party.
2. If you listen to the dialing tone, Press the phone
number of the2nd party phone.
3. Press Redial/Flash button.
And press Redial/Flash button again.
This service should be provided by your service
provider.
Basic Operation
You can make a call as follows:
button.
1. Pick up the handset or press
2. Listen for dial tone and enter the phone number.
3. Wait for the Auto Time-out or Press Redial/Flash button.
4. The call is connected and you may start conversation.
5. To disconnect the call, replace the handset or press
button.
Method 2
2.4 Call Wait
1. Press button, you may start conversation with called
number.
2. Re-press button, you may start conversation with
previous number.
2.5 Volume Control
1. Press Up/Down button of navigation while in a call, to
adjust speaker volume.
2. Press Menu + 1( Mute/Unmute ) to prevent sound
from yourend during the call. To cancel Mute, Press
again Menu +1( Mute/Unmute ).
3. Press Menu + 4( MIC Level ) during a call and select
Low or High by pressing Up/Down button, to adjust
MIC volume.
Basic Operation
2.6 Receiving a Call
Basic Operation
When the bell rings in idle state, you can receive a call
as follows:
button.
1. Pick up the handset or press the
2. Start a conversation. To disconnect the call, replace
the handsetor press the
button.
2.7 Memo
Allow you to store number during the call.
To store number :
1. Press Menu + 2( Memo ).
2. Enter up to 32 numbers using the keypad.
3. Press OK key to save.
To retrieve an In Call Memo :
1. Press Redial/Flash button to see saved number.
2.8 Lock Mode
1. Press ‘#’ button for some time. The phone is now
locked. Tounlock, press Menu and enter lock code
(Default “0000”).
Also you can lock your phone manually. If you need to
modify thelock code, you may modify it using the
New Lock Code within the security menu.
Menu Tree
3.1 PHONE BOOK
Up to 300 entries can be listed here.
1. Enter the area code and phone number (Max. 32 digits)
in on-hook state.
2. Press OK key and enter name.
3. Enter the desired memory location.
4. The phone will display a message asking you whether
to keepyour number as secret or not.
Select NO or Yes using Up/Down button and
press OK key.
3.1.1 Find
1. Press Menu + 1( PHONEBOOK ) + 1( Find ) in
1. Press Menu + 1( PHONEBOOK ) + 3( Erase All ) in
on-hookstate.
3.2 MESSAGES
The phone can store up to 50 messages in each Inbox and
Outbox. If you press OK Key, SMS Menu is activated.In
the list of Inbox, all sorts of the icon have the meaning as
follows :
! : Unread message
V : Read messageIn
Inbox, the meaning of (5/37) beside Inbox is that 5 out of
37messages are unread.
3.2.1 Write
1. Press OK
+ 1( Write ) in on-hook state.
2. Select a desired search Menu.
2. Enter phone number or press Redial/Flash to
search from phonebook.
▶ Address, Name, Number : Enter full or part of name
3. Write messages.
on-hookstate.
(number),select OK .
3. Select desired item.
▶ OK key : can edit item.
▶ Redial/Flash : can delete item.
3.1.2 Add
You can save up to 300 entries in your LSP-450 phonebook.
1. Press Menu + 1( PHONEBOOK ) + 2( Add ) in
on-hookstate.
Menu Tree
To store phone number :
3.1.3 Erase All
4. Press OK key to send message.
3.2.2 Inbox
1. Press OK + 2(
Inbox
) + in onhook state.
2. To delete desired message, select Redial/Flash key.
3. To view desired message, select OK .
4. Press Menu to reply, forward, erase a message or
save thesender’s number in the phone-book.
Menu Tree
3.2.3 SMS 8282
Menu Tree
1. Press OK + 3( SMS 8282 ) in on-hook state.
END/PWR
Dial/Flash
2. You may select from nine items (1. What’s New? / 2.
News / 3. Cricket / 4. Astrology / 5. Win Prizes / 6. Stocks /
7. Fun / 8. LifeStyle / 9. More ).
3.2.4 Outbox
All your successfully sent messages are saved here.
1. Press OK + 4( Outbox ) in on-hook state.
3.2.5 Voice Mail
button to make a call
back yourvoice mailbox if the number of the voice
mailbox is provided bythe telecom service company’s
system.
3.2.6 Erase Messages
You may erase all messages from three options (1: Inbox &
Voice / 2: Outbox / 3: All Messages).
1. Press OK + 6( Erase Messages ) in on-hook state.
3.2.7 MSG Settings
Priority
1. Press OK +7( MSG Settings ) + 1( Priority ) in on-hook
state.
Delivery ACK
1. Press OK + 7( MSG Settings ) + 2( Delivery ACK ) in
on-hook state.
Defer Delivery
1. Press OK + 7( MSG Settings ) + 3( Defer Delivery ) in
on-hook state.
Valid Period
1. Press OK + 7( MSG Settings ) + 4( Valid Period ) in
1. Press OK + 5( Voice Mail ) in on-hook state.
2. Pick up the handset or press
2. You may select from three options (Normal / Urgent
/Emergency).
on-hook state.
Save Sent MSG
1. Press OK + 7( MSG Settings ) + 5( Save Sent MSG )i n
on-hook state.
Auto Del. Inbox
1. Press OK + 7( MSG Settings ) + 6( Auto Del. Inbox ) in
on-hook state.
3.3 CALL HISTORY
The phone can store up to 30 Missed, 30 Received, 30
Dialled calls,and 30 In Call Memo in Call History.
All sorts of the icons have the meaning as follows :
- Received :
- In call Memo :
- Dialled :
- Missed :
- Call Waiting :
!!
C - 3-Way! Call :
!!
CC
Menu Tree
3.3.1 All Call
1. Press Menu
All Dialled
+ 3( CALL HISTORY ) + 1( All Call ) or
4. After you press OK key, press OK key to see more
information and press OK key to save the number in
the phonebook.
3.3.2 Missed
1. Press Menu + 3( CALL HISTORY ) + 2( Missed ) in
on-hookstate.
3.3.3 Received
1. Press Menu + 3( CALL HISTORY ) + 3( Received ) in
on-hookstate.
) in
on-hookstate.
3.3.5 In Call Memo
1. Press Menu + 3( CALL HISTORY ) + 5( In Call Memo ) in
on-hookstate.
3.3.6 Call Duration
Last Dialled
1. Press Menu + 3( CALL HISTORY ) + 6( Call Duration ) in
on-hookstate.
All Calls
1. Press Menu + 3( CALL HISTORY ) + 6( Call Duration )+
3( All Calls ) in on-hookstate.
Reset
1. Press Menu + 3( CALL HISTORY ) + 6( Call Duration )+
4(
Reset
) in on-hookstate.
3.3.7 Erase History
You may erase all history from five options (1: Erase All Call
/ 2:Erase Missed / 3: Erase Received / 4: Erase Dialled / 5:
Erase Memo).
1. Press Menu + 3( CALL HISTORY ) + 7( Erase History ) in
on-hookstate
3.3.4 Dialled
1. Press Menu + 3( CALL HISTORY ) + 4( Dialled
1. Press Menu + 3( CALL HISTORY ) + 6( Call Duration )+
2( All Dialled ) in on-hookstate.
Menu Tree
Redial/Flash button.
2. To view desired item, press OK key.
3. To erase desired number, press Redial/Flash key.
3.4 SOUND
3.4.1 Ring Type
1. Press Menu + 4( SOUND ) + 1( Ring Type ) in
on-hookstate.
2. Select one of the following : (Ring/One-Beep/Light)
3.4.2 Ring Tone
1. Press Menu + 4( SOUND ) + 2(
on-hookstate.
Ring Tone
) in

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0d5e3f88-25f6-4321-baca-58290ecedbd6
Modify Date                     : 2009:03:25 10:53:00+09:00
Create Date                     : 2009:03:25 10:52:46+09:00
Metadata Date                   : 2009:03:25 10:53:00+09:00
Document ID                     : uuid:ac9ff4d8-7992-4603-bef4-6dd99e19a4df
Format                          : application/pdf
Creator                         : Adobe InDesign CS2 (4.0.5)
Producer                        : Adobe PDF Library 7.0

EXIF Metadata provided by EXIF.tools