Extreme Networks OAP36C HiPath Wireless Outdoor Access Point User Manual 9034581 AP3660 QuickInstGde print

Download:
Mirror Download [FCC.gov]
Document ID	1514817
Application ID	/nZ/FWMX3DkM0+IMdd3ulA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.37kB (629686 bits)
Date Submitted	2011-08-02 00:00:00
Date Available	2011-12-16 00:00:00
Creation Date	2004-12-17 11:57:16
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2011-08-02 19:41:42
Document Title	9034581_AP3660_QuickInstGde_print.fm
Document Creator	FrameMaker 8.0
Document Author:	mschatzk

17x11 bleed template; DragonNotice; large text
Installing the Enterasys Wireless Outdoor
AP3660
Electrical Hazard: Only qualified personnel should perform installation
procedures.
For complete installation instructions and information
about the Enterasys Wireless Outdoor AP3660, see the
Enterasys Wireless Outdoor AP3660 Installation Guide at http:/
/www.enterasys.com/support/manuals.
Overview of the Enterasys Wireless Outdoor
AP3660
The Enterasys Wireless Outdoor AP enables you to extend
your Wireless LAN beyond the boundaries of indoor
locations. They are resistant to harsh outdoor conditions
and extreme temperatures. Using the advanced wireless
distribution mesh feature of Enterasys Wireless LAN, the
Enterasys Wireless Outdoor AP3660 can extend your
Wireless LAN to outdoor locations without Ethernet
cabling. A mounting bracket is available to enable quick
and easy mounting of the Enterasys Wireless Outdoor APs
to walls and poles.
Figure 1
Enterasys Wireless Outdoor AP3660
Antenna Connectors
• 4 spring washers
• 1 ground screw
• RJ45 waterproof connector assembly
• A printed copy of the Enterasys Wireless Outdoor Access
Point Quick Reference ‐ AP3660
Figure 4
AP3660 - Pole Mount Option 1
You can power up the AP in one of the following ways:
Note: Before you start mounting the Enterasys Wireless Outdoor
AP3660, read the Safety Guidelines below.
Mounting and Connecting the Enterasys
Wireless Outdoor AP3660
Mounting and connecting the Enterasys Wireless Outdoor
AP3660 can be accomplished easily and safely by following
the instructions in the full Enterasys Wireless Outdoor Access
Point AP3660 Installation Guide. The installation of the
Outdoor AP should be performed by a professional
installer to ensure proper operation and compliance with
safety guidelines.
Figure 5
AP3660 - Pole Mount Option 2
Figure 6
AP3660 - Pole Mount Option 3
Mounting the Outdoor AP3660:
1. Attach the mounting bracket to the AP3660 using four
M6 screws and washers. You can attach the bracket to the
AP in either the vertical or horizontal position as shown
in Figures 2 and 3.
Figure 2
Connecting and powering the AP
• Power over Ethernet: Adding PoE injector
You can provide power to the Ethernet cable with a PoE
injector. The PoE injector must be 802.3at compliant. The
PoE injector is not provided with the AP.
A waterproof RJ45 connector is provided to connect the
PoE injector to the AP3660. You must connect the RJ45
connector to the RJ45 cable. For instructions, refer to the
full Enterasys Wireless Outdoor Access Point AP3660
Installation Guide.
• Power by external power supply:
You can purchase an external power supply unit (WS‐
PS3660‐MR) to power the AP. See your Enterasys sales
representative for details.
For power supply installation instructions, refer to the
Enterasys Wireless Outdoor Access Point AP3660 Installation
Guide.
Regulatory and Compliance information
Federal Communications Commission (FCC) Notice:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Mounting Bracket - Vertical Position
Warning: Changes or modifications made to this device which are
not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment
b.Mount the AP3660 and the attached mounting bracket
to a wall using four wood/gyprock screws as shown in
Figure 7.
Figure 3
The Enterasys Wireless Outdoor AP3660 supports the
902.11n, 802.11a, 802.11g, and full backward compatibility
with legacy 802.11b devices. The Enterasys Wireless
Outdoor AP3660 with external antenna connectors
supports a variety of antennas, providing range and
coverage versatility.
The Enterasys Wireless Outdoor AP3660 interoperates fully
with Enterasys Wireless LAN, including support for
VoWLAN, branch office mode, guest services, RTLS,
availability and mobility features.
Unpacking the Enterasys Wireless Outdoor AP3660
Unpack the AP from its carton. The following components
are supplied with the Enterasys Wireless Outdoor AP3660
package
• 1 mounting bracket
• 2 stainless steel tie back straps that support pole
diameters up to 4 inches
• 4 M6 screws
• 4 washers
Mounting Bracket - Horizontal Position
Figure 7
AP3660 - Wall Mount
Industry Canada Notice:
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations for the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits
radioĂŠlectriques dĂŠpassant les limites applicables aux
appareils numĂŠriques de la class B prescrites dans le
Règlement sur le brouillage radioÊlectrique ÊdictÊ par le
ministère des Communications du Canada.
Refer to the HiPath Wireless Controller, Access Points, and
Convergence Software User Guide Installation Guide,
Appendix B, ĘşRegulatory information,Ęş for complete
regulatory information.
2. You can mount the AP3660 to either a pole or a wall:
a. To mount the AP3660 with the attached mounting
bracket to a pole, use the supplied stainless steel tie
back straps.
You can mount the AP3660 to a pole in one of three
possible configurations, as shown in Figures 4, 5, and 6.
3. Install the external antenna intended for area coverage.
For information about antenna selection and installation,
refer to the External Antenna Site Preparation and
Installation Guide.
4. Attach the external antenna cables to the RP‐N
connectors on the AP.
17x11 bleed template; DragonNotice; large text
Hazardous Substances
Safety Guidelines
This section contains notices that you have to adhere to
ensure your personal safety and to prevent any damage to
the equipment.
Qualified Personnel:
Electrical Hazard: Only qualified personnel should perform
installation procedures. Within the context of the safety notes in
this documentation qualified persons are defined as persons who
are authorized to commission, ground and label devices, systems
and circuits in accordance with established safety practices and
standards. A qualified person understands the requirements risks
involved with installing outdoor electrical equipment in accordance
with national codes.
Grounding Warning:
Warning: To operate the Enterasys Wireless Outdoor AP3660
safely, the chassis ground connector must have a suitable cable
connected. Do not use the Enterasys Wireless Outdoor AP3660
without a ground cable connected.
Lightning Protection Warning:
Warning: Antennas installed outdoors must be within the area
covered by a lightning protection system. Make sure that all
conducting systems entering from outdoors can be protected by a
lightning protection potential equalization system.When
implementing your lightning protection concept, make sure you
adhere to the VDE 0182 or IEC 62305 standard.
The AP3660 has a built-in lightning protector; no external lightning
protector is required. You must however note that the lightning
protector is not an adequate protection against a lightning strike.
The lightening protector only works within the framework of a
comprehensive lightning protection concept. If you have
questions, ask a qualified specialist company.
This product complies with the requirements of European
Directive, 2002/95/EC, Restriction of Hazardous Substances
(RoHS) in Electrical and Electronic Equipment.
European Waste Electrical and Electronic
Equipment (WEEE) Notice
ENTERASYS and ENTERASYS NETWORKS and any logos
associated therewith, are trademarks or registered trademarks of
Enterasys Networks, Inc., in the United States and/or other
countries. For a complete list of Enterasys trademarks, see http://
www.enterasys.com/company/trademarks.aspx.
All other product names mentioned in this document may be
trademarks or registered trademarks of their respective
companies.
Enterasys Wireless
Outdoor Access Point
In accordance with Directive 2002/96/EC of the European
Parliament on waste electrical and electronic equipment (WEEE):
Quick Reference
1. The symbol above indicates that separate collection of electrical
and electronic equipment is required and that this product was
placed on the European market after August 13, 2005, the date
of enforcement for Directive 2002/96/EC.
2. When this product has reached the end of its serviceable life, it
cannot be disposed of as unsorted municipal waste. It must be
collected and treated separately.
3. It has been determined by the European Parliament that there
are potential negative effects on the environment and human
health as a result of the presence of hazardous substances in
electrical and electronic equipment.
4. It is the users’ responsibility to utilize the available collection
system to ensure WEEE is properly treated.
For information about the available collection system, please go
to www.enterasys.com/services/support/ or contact Enterasys
Customer Support at 353 61 705586 (Ireland).
AP3660
Declaration of Conformity
A “Declaration of Conformity” in accordance with the preceding
directives and standards has been made and is on file at Dell Inc.
Products Europe BV, Limerick, Ireland.
ѻક䇈ᯢк䰘ӊ
Supplement to Product Instructions
䚼ӊৡ⿄
(Parts)
䞥ሲ䚼ӊ
(Metal Parts)
⬉䏃῵ഫ
(Circuit Modules)
⬉㓚ঞ⬉㓚㒘ӊ
(Cables & Cable Assemblies)
ล᭭੠㘮ড়⠽䚼ӊ
(Plastic and Polymeric parts)
⬉䏃ᓔ݇
(Circuit Breakers)
ƻ˖
䪙
3E
᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴(Hazardous Substance)
∲
䬝
݁Ӌ䫀
໮⒈㘨㣃
+J
&G
&U
3%%
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
໮⒈Ѡ㣃䝮
3%'(
㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ SJ/T 11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is
below the relevant threshold of the SJ/T 11363-2006 standard.
h˖
㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎSJ/T 11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖DŽ
Indicates that the concentration of the hazardous substance of at least one of all homogeneous
materials in the parts is above the relevant threshold of the SJ/T 11363-2006 standard.
ᇍ䫔ଂП᮹ⱘ᠔ଂѻકᴀ㸼ᰒ⼎
߃߯կᑨ䫒ⱘ⬉ᄤֵᙃѻકৃ㛑ࣙ৿䖭ѯ⠽䋼DŽ⊼ᛣ೼᠔ଂѻકЁৃ㛑Ӯгৃ㛑ϡӮ৿᳝᠔᳝᠔߫ⱘ䚼ӊDŽ
This table shows where these substances may be found in the supply chain of Enterasys’ electronic
information products, as of the date of sale of the enclosed product. Note that some of the component types
listed above may or may not be a part of the enclosed product.
䰸䴲঺໪⡍߿ⱘᷛ⊼ℸᷛᖫЎ䩜ᇍ᠔⍝ঞѻકⱘ⦃ֱՓ⫼ᳳᷛᖫᶤѯ䳊䚼ӊӮ
᳝ϔϾϡৠⱘ⦃ֱՓ⫼ᳳ ՟བ⬉∴ऩ‫ܗ‬῵ഫ 䌈೼݊ѻકϞ
ℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻકᰃ೼ѻક᠟‫ݠ‬Ё᠔㾘ᅮⱘᴵӊϟᎹ԰
The Environmentally Friendly Use Period (EFUP) for all enclosed products and their parts
are per the symbol shown here, unless otherwise marked. Certain parts may have a
different EFUP (for example, battery modules) and so are marked to reflect such. The
Environmentally Friendly Use Period is valid only when the product is operated under the
conditions defined in the product manual.
50
Notice
Enterasys Networks reserves the right to make changes in
specifications and other information contained in this document
and its Web site without prior notice. The reader should in all
cases consult Enterasys Networks to determine whether any such
changes have been made.
The hardware, firmware, or software described in this document
is subject to change without notice.
IN NO EVENT SHALL Enterasys Networks BE LIABLE FOR
ANY INCIDENTAL, INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING
BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR
RELATED TO THIS DOCUMENT, WEB SITE, OR THE
INFORMATION CONTAINED IN THEM, EVEN IF Enterasys
Networks HAS BEEN ADVISED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF, THE POSSIBILITY OF SUCH DAMAGES.
Enterasys Networks, Inc.
50 Minuteman Road
Andover, MA 01810
Š 2010 Enterasys Networks, Inc. All rights reserved.
Part Number: 9034581 September 2010
P/N 9034581
17x11 bleed template; AP3660PwrSupply; large text
Installing the Enterasys Wireless Outdoor
AP3660 Power Supply
Electrical Hazard: Only qualified personnel should perform installation
procedures.
For complete installation instructions and information
about the Enterasys Wireless Outdoor AP3660 power
supply, see the Enterasys Wireless Outdoor AP3660
Installation Guide at http://www.enterasys.com/support/
manuals.
Overview of the Outdoor AP3660 Power
Supply
The Enterasys Wireless Outdoor AP3660 power supply
provides power to the Enterasys Wireless Outdoor AP3660
which enables you to extend your Wireless LAN beyond
the boundaries of indoor locations. The power supply is
resistant to harsh outdoor conditions and extreme
temperatures. A mounting bracket is provided to enable
quick and easy mounting of the HiPath Wireless Outdoor
AP3660 power supply to walls and poles.
Figure 1
Mounting and Connecting the Outdoor
AP3660 Power Supply
Mounting and connecting the Enterasys Wireless Outdoor
AP3660 power supply can be accomplished easily and
safely by following the instructions in the full Enterasys
Wireless Outdoor Access Point AP3660 Installation Guide. The
installation of the Outdoor AP power supply should be
performed by a professional installer to ensure proper
operation and compliance with safety guidelines.
b.To mount the AP3660 power supply with the attached
mounting bracket to a pole, use the supplied stainless
steel mounting straps, as shown in Figures 5, 6, and 7.
Figure 5
AP3660 Power Supply - Pole Mount Option 1
3. Insert one end of the DC to DC cable into the DC
connector on the bottom of the AP3660 power supply.
Screw on and hand tighten the knurled knob securely
Figure 9
DC Connector on the Power Supply
Mounting the Outdoor AP3660 Power Supply:
1. Attach the mounting bracket to the AP3660 power supply
using four screws per power supply. You can attach the
bracket to the power supply in either the vertical or
horizontal position, as shown in Figures 2 and 3.
Figure 2
Mounting Bracket - Vertical Position
DC Connector
Figure 6
Power Receptacle
AP3660 Power Supply - Pole Mount Option 2
4. Insert the AC adapter into the power receptacle on the
power supply. Screw on and hand tighten the knurled
knob securely.
Note: Using the supplied AC adapter, you must create your own
power cord. For instructions, refer to the full Enterasys Wireless
Outdoor Access Point AP3660 Installation Guide.
Enterasys Wireless Outdoor AP3660 Power Supply
5. Insert the plug into the power source.
In the horizontal position, you can attach two power
supplies to one bracket, as shown in Figure 3.
Figure 3
Mounting Bracket - Horizontal Position
Regulatory and Compliance information
Figure 7
AP3660 Power Supply - Pole Mount Option 3
Federal Communications Commission (FCC) Notice:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications made to this device which are
not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment
Specifications:
• AC Input Frequency Range: 50‐60Hz, 1A Max
• AC Input Voltage Range: 100‐240 VAC
• Output Voltage: +12Vdc
• Output Current: 3.33 A max
Unpacking the Enterasys Wireless Outdoor AP3660
Power Supply
The following components are supplied with the Enterasys
Wireless Outdoor AP3660 power supply package:
• 1 mounting bracket
• 2 stainless steel tie back straps that support pole
diameters up to 4 inches
• 4 M5 screws
• 4 washers
• 4 spring washers
• 1 ground screw
• 1 DC to DC cable
• 1 AC adapter
• A printed copy of the Enterasys Outdoor Access Point Quick
Reference ‐ Power Supply
Note: Before you start mounting the Enterasys Wireless Outdoor
AP3660 power supply, read the Safety Guidelines below.
2. You can mount the AP3660 power supply to either a pole
or a wall:
a. To mount the AP3660 power supply and the attached
mounting bracket to a wall, use four wood/gyprock
screws, as shown in Figure 4.
Figure 4
Power Supply - Wall Mount
Industry Canada Notice:
Cabling the Power Supply
To connect the power supply to the AP3660:
1. Locate the DC to DC cable.
2. Insert one end of the DC to DC cable into the DC
connector on the bottom of the AP3660. Screw on and
hand tighten the knurled knob securely.
Figure 8
DC Connector on AP3660 Back Panel
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations for the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits
radioĂŠlectriques dĂŠpassant les limites applicables aux
appareils numĂŠriques de la class B prescrites dans le
Règlement sur le brouillage radioÊlectrique ÊdictÊ par le
ministère des Communications du Canada.
Refer to the HiPath Wireless Controller, Access Points, and
Convergence Software User Guide Installation Guide,
Appendix B, ĘşRegulatory information,Ęş for complete
regulatory information.
Safety Guidelines
DC Connector
This section contains notices that you have to adhere to
ensure your personal safety and to prevent any damage to
the equipment.
17x11 bleed template; AP3660PwrSupply; large text
Hazardous Substances
Qualified Personnel:
Electrical Hazard: Only qualified personnel should perform
installation procedures. Within the context of the safety notes in
this documentation qualified persons are defined as persons who
are authorized to commission, ground and label devices, systems
and circuits in accordance with established safety practices and
standards. A qualified person understands the requirements risks
involved with installing outdoor electrical equipment in accordance
with national codes.
This product complies with the requirements of European
Directive, 2002/95/EC, Restriction of Hazardous Substances
(RoHS) in Electrical and Electronic Equipment.
European Waste Electrical and Electronic
Equipment (WEEE) Notice
Warning: To operate the Enterasys Wireless Outdoor AP3660
safely, the chassis ground connector must have a suitable cable
connected. Do not use the Enterasys Wireless Outdoor AP3660
without a ground cable connected.
Line Voltage Warning:
Warning: If the housing is not perfectly sealed, there is a danger
to life due to the line voltage if the Enterasys Wireless AP3660
Power Supply is subjected to spray water or dampness. Make sure
that you keep to the following safety rules:
• Before connecting, turn off the power supply
• The sealing of the cable feedthroughs of the Enterasys Wireless
Outdoor Power Supply is only assured when the cable has a
suitable diameter and adequate tensile strength. Only use
cables that meet the specifications as mentioned in the
Enterasys Wireless Outdoor Power Supply Installation Guide.
• Never wrap insulating tape or other materials around thinner
cables to achieve the required diameter. In the case, neither the
housing seal nor the strain relief clamps can fulfil their function.
Close all unused openings in the housing seal with the sealing
plugs supplied with the Enterasys Wireless Outdoor AP Power
Supply package. Do not use fillers or any other material under any
circumstances.
In accordance with Directive 2002/96/EC of the European
Parliament on waste electrical and electronic equipment (WEEE):
1. The symbol above indicates that separate collection of electrical
and electronic equipment is required and that this product was
placed on the European market after August 13, 2005, the date
of enforcement for Directive 2002/96/EC.
2. When this product has reached the end of its serviceable life, it
cannot be disposed of as unsorted municipal waste. It must be
collected and treated separately.
3. It has been determined by the European Parliament that there
are potential negative effects on the environment and human
health as a result of the presence of hazardous substances in
electrical and electronic equipment.
4. It is the users’ responsibility to utilize the available collection
system to ensure WEEE is properly treated.
For information about the available collection system, please go
to www.enterasys.com/services/support/ or contact Enterasys
Customer Support at 353 61 705586 (Ireland).
ѻક䇈ᯢк䰘ӊ
䞥ሲ䚼ӊ
⬉䏃῵ഫ
(Circuit Modules)
⬉㓚ঞ⬉㓚㒘ӊ
(Cables & Cable Assemblies)
ล᭭੠㘮ড়⠽䚼ӊ
(Plastic and Polymeric parts)
⬉䏃ᓔ݇
(Circuit Breakers)
ƻ˖
Quick Reference
Power Supply
Declaration of Conformity
Notice
䪙
3E
᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴(Hazardous Substance)
∲
䬝
݁Ӌ䫀
໮⒈㘨㣃
+J
&G
&U
3%%
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
໮⒈Ѡ㣃䝮
3%'(
㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ SJ/T 11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is
below the relevant threshold of the SJ/T 11363-2006 standard.
h˖
Enterasys Wireless
A “Declaration of Conformity” in accordance with the preceding
directives and standards has been made and is on file at Dell Inc.
Products Europe BV, Limerick, Ireland.
Supplement to Product Instructions
(Metal Parts)
All other product names mentioned in this document may be
trademarks or registered trademarks of their respective
companies.
Outdoor Access Point
Grounding Warning:
䚼ӊৡ⿄
(Parts)
ENTERASYS and ENTERASYS NETWORKS and any logos
associated therewith, are trademarks or registered trademarks of
Enterasys Networks, Inc., in the United States and/or other
countries. For a complete list of Enterasys trademarks, see http://
www.enterasys.com/company/trademarks.aspx.
㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎSJ/T 11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖DŽ
Indicates that the concentration of the hazardous substance of at least one of all homogeneous
materials in the parts is above the relevant threshold of the SJ/T 11363-2006 standard.
ᇍ䫔ଂП᮹ⱘ᠔ଂѻકᴀ㸼ᰒ⼎
߃߯կᑨ䫒ⱘ⬉ᄤֵᙃѻકৃ㛑ࣙ৿䖭ѯ⠽䋼DŽ⊼ᛣ೼᠔ଂѻકЁৃ㛑Ӯгৃ㛑ϡӮ৿᳝᠔᳝᠔߫ⱘ䚼ӊDŽ
This table shows where these substances may be found in the supply chain of Enterasys’ electronic
information products, as of the date of sale of the enclosed product. Note that some of the component types
listed above may or may not be a part of the enclosed product.
䰸䴲঺໪⡍߿ⱘᷛ⊼ℸᷛᖫЎ䩜ᇍ᠔⍝ঞѻકⱘ⦃ֱՓ⫼ᳳᷛᖫᶤѯ䳊䚼ӊӮ
᳝ϔϾϡৠⱘ⦃ֱՓ⫼ᳳ ՟བ⬉∴ऩ‫ܗ‬῵ഫ 䌈೼݊ѻકϞ
ℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻકᰃ೼ѻક᠟‫ݠ‬Ё᠔㾘ᅮⱘᴵӊϟᎹ԰
The Environmentally Friendly Use Period (EFUP) for all enclosed products and their parts
are per the symbol shown here, unless otherwise marked. Certain parts may have a
different EFUP (for example, battery modules) and so are marked to reflect such. The
Environmentally Friendly Use Period is valid only when the product is operated under the
conditions defined in the product manual.
50
Enterasys Networks reserves the right to make changes in
specifications and other information contained in this document
and its Web site without prior notice. The reader should in all
cases consult Enterasys Networks to determine whether any such
changes have been made.
The hardware, firmware, or software described in this document
is subject to change without notice.
IN NO EVENT SHALL ENTERASYS NETWORKS BE LIABLE
FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING
BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR
RELATED TO THIS DOCUMENT, WEB SITE, OR THE
INFORMATION CONTAINED IN THEM, EVEN IF ENTERASYS
NETWORKS HAS BEEN ADVISED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF, THE POSSIBILITY OF SUCH DAMAGES.
Enterasys Networks, Inc.
50 Minuteman Road
Andover, MA 01810
Š 2010 Enterasys Networks, Inc. All rights reserved.
Part Number: 9034582 September 2010
P/N 9034582
FCC Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
●
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This devic e complies with Part 15 of the FCC Rule
s. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept an y
interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
This dev ice and it s antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 100cm between the radiator &
your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : mschatzk
Create Date                     : 2004:12:17 11:57:16Z
Modify Date                     : 2011:08:02 19:41:42+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 8.0
Metadata Date                   : 2011:08:02 19:41:42+08:00
Format                          : application/pdf
Title                           : 9034581_AP3660_QuickInstGde_print.fm
Creator                         : mschatzk
Document ID                     : uuid:c876eb79-358c-4d11-a228-429a27cfb0d5
Instance ID                     : uuid:6e039e00-a55e-457d-b125-6e26573a0266
Page Mode                       : UseNone
Page Count                      : 5

EXIF Metadata provided by EXIF.tools