FUJITSU TEN 74E30081000011 RFID Reader Writer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1297165
Application ID	f9KfpHnx+OJiQRgvxqod9g==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.9kB (548692 bits)
Date Submitted	2010-06-16 00:00:00
Date Available	2010-06-17 00:00:00
Creation Date	2010-03-30 14:37:08
Producing Software	Acrobat Distiller 9.3.0 (Windows)
Document Lastmod	2010-03-30 14:46:57
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	msrd197

USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
USER MANUAL
RFID Reader/Writer
74Eｰ300810-0001-1D
(Built-in Type)
Version 1.05
FUJITSU TEN LIMITED
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
Contents
1. Safety Precautions
1.1 Warning
1.2 Caution
2. Outline
2.1 Outline
2.2 Feature
2.3 In use
3. Architecture
3.1 System Architecture
4. Specification
4.1 Specification
4.2 Dimension
5. Names and Functions
5.1 Names and Functions of each part
6. Installation
6.1 Installation Enviroment
6.2 Connecting Cable
7. Communications Specifications
7.1 Communications Specifications
FUJITSU TEN LIMITED
[1 / 8]
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
１． Safety Concerns
1.1
Warning
WARNING
1) In case installing this product, Turn off the power supply or remove the
connection
of power cable.
2) This product is permitted by Radio regulation law in Japan. So it is not necessary
to get the permission of high frequency equipment to set.
And this product doesn't use except for the following country.
＜Built-in module＞
R/W module model
PC-180001-M
Number
AC-10008
＜Electric wave acquisition country＞
ID
Country
China
Maxico
Spain
Philippin
Tｈailand
If you use the module other than PC-180001 or remodels it,
you are punished by ordinance.
Changes or modifications not expressly approved by the manufacturer
for compliance could void the user's authority to operate the equipment.
It is punished similarly when using it in a country other than the above.
3) Don't use other AC adaptor excluding our company specified.
It might cause the electric shock, a fire, and the breakdown.
4) This product uses electric wave.
According to the place and method for use, it is danger that influences
medical equipment.
Observe the following strictly when operating it to reduce this influence.
① Do not use this product in the hospital or the airport.
② Do not use it for medical equipment.
③ Those who install the planting type medical equipment must not bring
the installation part close from the antenna of the RFID equipment
within 22cm.
FUJITSU TEN LIMITED
[2 / 8]
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
1.2
Caution
1) Please avoid the installation in the following places.
CAUTION
① Enviroment that deviated from the specifications range of this product.
② Use in the following place
a．Locations exposed to direct sunlight.
b．Locations high temperature and high humidity.
c．Locations directly subjected to vibration and shock.
d．Locations where a strong magnetic field or electric field occurs.
e．Locations with corrosive gas or inflammable gas.
f．Locations where condensation occurs due to sudden temperature changes.
g．Locations covered metal.
2) Content with danger of not operating normally
① When there is equipment which generates the electric wave in the vicinity
of 13.56MHz to be near.
② When there are a speaker or an echo thing to be near.
③ When in surroundings, there is a noise source.
3) Do not set up this product in an unstable place.
It causes the breakdown when falling .
4) If you don't use equipment for a long time, stop to supply power,
except for pull out the AC adaptor.
5) This product is a communication device that uses the electric wave of 13.56MHz.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
① This device may not cause harmful interference, and
② This device must accept any interference received,
including interference that may cause undesired operation.
6) This product and the internal antenna must not be co-located or operating
in conjunction with any other antenna or transmitter.
End user cannot modify this transmitter device.
Any unauthorized modification made on the device could avoid the user's
authority to operate this device.
7) The distance of Reader/Writer (R/W) and IC tag changes by the following.
① Holding of IC tag
② Material (set up)
③ Size and shape
④ Presence of electric conducting material
FUJITSU TEN LIMITED
[3 / 8]
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
2. Outline
2.1 Outline
This product is RFID Reader/Writer to be able to read and write IC tag data by non-contact by using the frequency of 13.56MHz.
It is possible to use it for various usages of management of entrance and exit and the distribution management, etc.
A basic control of this product becomes operation of returning the response for the command from a upper system.
2.2 Feature
Even when two or more IC tag exists in the area which can be read, this product can be read.
It corresponds to a standard command and two or more option commands in accordance with international standard ISO/IEC15693.
Because the data of IC tag can be freely overwrited, it can repeat, and be low-cost.
It is a Reader/Writer of the small size and low power consumption.
As for the connection with a upper system, the connection with RS-232C or USB becomes possible.
Connector No.
CN1
CN2
CN3
Connector
RS-232C
RS-232C
USB
Communication
Transmission／Reception
Transmission
Transmission／Reception
Connecting Cable Ｓpecification
Ｄ-ｓｕｂ ９pin⇔RJ45
Ｄ-ｓｕｂ ９pi⇔RJ45
Series A Plug⇔Series B Plug
2.3 In use
Because this product corresponds to "Inducement type reading and writing communication equipment" of "High frequency use equipment"
of the Radio Law of Japan; This is applied to the Ministry of General Affairs, and the formal licensing is acquired.
Therefore, the user can use it without following a procedure for the permission application of the high frequency use equipment.
FUJITSU TEN LIMITED
[4 / 8]
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
3. Architecture
3.1 System Architecture
This product communicates with the lower system (IC tag) and the upper system (computer and PLC, etc.).
This product can change operation by sending the command from the upper system.
Power is supplied by Reader/Writer's electric wave when IC tag enters in the antenna area, and the Reader/Writer is communicated.
The communication with the upper system passes serial I/F or USB I/F.
Connection with Computer
IC tag
Ｃommunication with
the ｌower system
Reader/Writer
Computer
Ｃommunication with the upper system
RS-232C
USB
Exclusive AC adaptor
DC5V supply
Connection with PLC
IC tag
Ｃommunication with
the ｌower system
PLC
Reader/Writer
Ｃommunication with the upper system
RS-232C
RS-232C Module
FUJITSU TEN LIMITED
Exclusive AC adaptor
DC5V supply
[5 / 8]
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
4.Specification
4.1 Specification
This product is RFID Reader/Writer to be able to read and write IC tag data by non-contact by using the frequency of 13.56MHz.
It is possible to use it for various usages of management of entrance and exit and the distribution management, etc.
A basic control of this product is operation of returning the response to the command from the upper system.
Item
Reader/Writer Module
frequency
Applied tag (*1)
Communication Range (*2)
Communication Command
Ｉ／Ｆ
Working Temperature
Working Humidity
Rated Power
Dimensions
Specifications
PC-1080001-M (Japan Formal Licensing No.: AC-10008)
13.56 MHz ± 7kHz
ISO15693 (Tag-it Plus/Pro, I･CODE SLI)
ISO14443 (MIFARE Classic, MIFARE Ultralight)
Felica (ID read only)
Tag-it : 80mm (Max.)
MIFARE : 40mm (Max.)
Felica : 35mm (Max.)
Multi Protocol Reader Writer Module (PC-1080001)
(Refer to Software Specification)
Serial Communication
Baud Rate: 19200bps (+ 0.32%)
Transmission Method: Asynchronous Communication Method
Data Structure: Data Length: 8bit, Stop Bit: 1bit, Non Parity
Error Detecting: BCC Method
Response Method: Response
0℃ - 60℃
30% - 85%R.H. （Non condensing）
DC 5V 10VA
60 mm X 95 mm X 25 mm (Exclude the installation flange)
*1) "Tag-it HF-I" is a registered trademark of the TEXAS INSTRUMENTS Inc.
"I.CODE SLI" and "MIFARE" are registered trademarks of the NXP Semiconductors Ltd.
"Felica" is a registered trademark of the Sony Corporation.
"Felica" is a technological method of the contactless IC card which the Sony Corporation developed.
*2) It is a value for opposing the card tag and the antenna correctly.
The value is different depending on the system requirements and the tag type.
Please see "Multi protocol R/W module software specifications" about the specification of software.
4.2 Dimension
FUJITSU TEN LIMITED
[6 / 8]
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
5. Names and Functions
5.1 Names and Functions of each part
①ＲＳ－２３２Ｃ Connector
ＲＳ－２３２Ｃ Connector
（ＲＪ４５）
＜Transmission／Reception＞
（ＲＪ４５）
＜Transmission＞
②ＵＳＢ Connector
（Standard Ｂ）
＜Transmission／Reception＞
③Communication SW
Center Position of Antenna
④Power Adapter Jack
（ＥＩＡＪ－＃２）
①RS-232C Connector
It is a connector of a Reader/Writer and the PC. The communication protocol is RS-232C. (flow control is not done)
In case connect to the PC, use the crossing cable of D-sub 9P (female) connector and RJ45 connector.
Turn on the left of ③Communication SW
Cable (Recommended) ： CBL-RJ45F9-150 （ＭＯＸＡ）
Show the signal name the table below.
ＲＳ－２３２Ｃ（Ｄ sub connector ９Ｐ）
Pin No.
１
２
３
４
５
６
７
８
９
Abbreviation
ＤＣＤ
ＴｘＤ
ＲｘＤ
ＤＳＲ
ＧＮＤ
ＤＴＲ
ＣＴＳ
ＲＴＳ
---
ＲＳ－２３２Ｃ（ＲＪ４５ connector）
Name
Data Carrier Detect
Transmitted Data
Received Data
Data Set Ready
ＧＮＤ
Data Terminal Ready
Clear to Send
Request to Send
Pin No.
１
２
３
４
５
６
７
８
Abbreviation
ＤＳＲ
ＲＴＳ
ＧＮＤ
ＴｘＤ
ＲｘＤ
ＤＣＤ
ＣＴＳ
ＤＴＲ
Name
Data Set Ready
Request to Send
ＧＮＤ
Transmitted Data
Received Data
Data Carrier Detect
Clear to Send
Data Terminal Ready
②USB Connector
It is a connector of a Reader/Writer and the PC.
In case connect to the PC, use the USB cable.
Turn on the right of ③Communication SW
Show the signal name the table below.
USB connector (Standard B)
Pin No.
１
２
３
４
Name
Ｖｂｕｓ
-Ｄａｔａ（Ｄ－）
＋Ｄａｔａ（Ｄ＋）
ＧＮＤ
Function
+5V
Data Line
Data Line
ＧＮＤ
④Power Adapter Jack
It is an input terminal; DC5V.
Exclusive ＡＣ Adapter ： ＵＳ３０－０５２０  [UNIFIVE CO.,LTD.]
Rated Power ：AC100V-AC240V(50/60Ｈz) 12W、0～50℃
Voltage(OUT)：+5V、Current(OUT)：2A、Plug specification ：EIAJ Voltage division2
WARNING
Do not use exclusive AC adapter.
FUJITSU TEN LIMITED
[7 / 8]
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
６． Installation
6.1 Installation Enviroment
6.1.1 General
Please avoid the installation in the following places.
CAUTION
・Enviroment that deviated from the specifications range of this product.
・Direct sunlight
・High temperature and high humidity
・Vibration
・Strong magnetic force and shock voltage
w・Firedamp
・Condensation or temperature excursion
・An electrically charged thing
・Do not use in the hospital or the airport.
・Do not use it for medical equipment.
・Those who install the planting type medical equipment must not bring the installation part close
from the antenna of the RFID equipment within 23cm.
WARNING
6.1.2 Environment in facilities
・Set up at the good ventilation.
・Don't set up near high temperature equipment (Heater,Transfer,Resistance(large capacity))
・In case temperature is over 60℃, set up the fan or air conditioner to down the temperature.
・Don't wire near the power code.
CAUTION
This product use the frequency of 13.56MHz, please attend to the following.
・Metal
Metal has the characteristic, reflect the electric wave.
Reception of the equipment becomes worse or there is a possibility of detecting it in the aria
where the IC tag is not detected either.
・Noise
Transceiver, motor, monitor and power source, generate the noise that influences the communication
with IC tag.
So in case using near the these equipment check the influence before use.
6.1.3 Installation method
Tighten an M4 screw with spring washer and flat washer in three places.
Do not use the hexagon head screw, so as not to tighten too much.
（The tighten torque is 075±0.05 N・m is recommended. ）
Ｍ４ Cross Pan head Screws
Ｍ４ Spring Washer
Ｍ４ Plain Washer
Equipment Side
FUJITSU TEN LIMITED
[8 / 8]
USER MANUAL
RFID Reader/Writer [74Eｰ300810-0001-1D]
６． Installation
6.2 Connecting Cable
・Set up the cable away from the equipment putting out noise.
・After it wires, check the connector is firmly set or not.
・Attend to cause the large power to the connector
・Install the ferrite core in each cable for the noise control.
CAUTION
6.2.1 Location of Installing Ferrite Core
Power Cable: Set up the ferrite core in two places within 100mm from the main body of the power adaptor, and within 100mm from the Reader/Writer's main body.
100mm Max.
Two Turns
SFT-59SN/TKK
100mm Max.
⇒RFID
Reader/Writer
SFT-36SN/TKK
Communication Cable (RS-232C, USB): Set up the ferrite core within 100mm from the the Reader/Writer's main body.
Two Turns
100mm Max.
RS-232C
⇒RFID
Reader/Writer
SFT-72SN/TKK
Two Turns
100mm Max.
USB
SFT-72SN/TKK
6.2.2 Method of Installing Ferrite Core
The cable around the ferrite core once so that the ferrite core should not move.
Close the ferrite core until you hear it click into place.
Two Turns
7. Communications Specifications
7.1 Communications Specifications
This Reader/Writer has the serial interface (RS-232C)(USB)
RS-232C interface （CN1）
PC can control a Reader/Writer by using serial interface
Serial Communication Format
Bit Rates
19200 bps
Data Transmission
8 bit
Stop Bit
1 bit
Parity
USB interface （CN3）
PC can control a Reader/Writer by using serial interface
Serial Communication Format
Bit Rates
19200 bps
Data Transmission
8 bit
Stop Bit
1 bit
Parity
FUJITSU TEN LIMITED
⇒RFID
Reader/Writer

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : msrd197
Create Date                     : 2010:03:30 14:37:08+09:00
Modify Date                     : 2010:03:30 14:46:57+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2010:03:30 14:46:57+09:00
Format                          : application/pdf
Title                           : <8EE688B590E096BE8F915F56312E30352E584C53>
Creator                         : msrd197
Producer                        : Acrobat Distiller 9.3.0 (Windows)
Document ID                     : uuid:bb7907c0-6f2e-4c47-983a-a22fb84ad978
Instance ID                     : uuid:575fcf19-0379-4131-9b46-627a92c445c3
Page Mode                       : UseThumbs
Page Count                      : 10

EXIF Metadata provided by EXIF.tools