| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1061540 |
| Application ID | VO1gmkrxH/g0SRuOTjTpHQ== |
| Document Description | Manual 1 4 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 144.49kB (1806122 bits) |
| Date Submitted | 2009-01-26 00:00:00 |
| Date Available | 2009-01-26 00:00:00 |
| Creation Date | 2009-01-20 13:28:01 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2009-01-20 13:28:09 |
| Document Title | F905i.book |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
F905i_E2kou
F905i.book
Page 135
Monday, April 21, 2008
10:53 AM
❖ Sent message details screen
❖ Deleting folders
a Status icon
➝P186 "Outbox/Unsent messages list screen"
b Attachment/SMS icon
➝P186 "Received message details screen"
c Mail No./No. of msgs
d Sent date and time
e Address type icon
: Receiver ( and
only for i-mode mail)
f Subject
• When i-mode mail or SMS is sent while staying overseas
(except GMT+08:00), may appear succeeding the
sending date and time.
◆ Creating/deleting folders
• You can set secret attribute to a created folder. In Privacy
• "Inbox", "Outbox" and "Unsent" folders cannot be deleted.
ae1 or 4-5ePlace the cursor on
the folder and
me2eAuthenticatee"Yes"
◆ Checking number of mail items
ae1 or 4-5ePlace the cursor on
the folder and me5
✔INFORMATION
• When operating from the mail list screen, press m, and select
"Display" ➝ "Check No. of items".
◆ Displaying mail address
ae1 or 5eSelect a foldereSelect a
maileme32
mode (when Mail & Logs is "Hide secrecy fldrs"), folders
with Secret attribute "ON" are not displayed.
• Setting Privacy mode➝P114
❖ Creating folders
• In Inbox, up to 40 folders in addition to "Inbox" folder and
folder for Message i-αppli can be created.
• In Outbox or Unsent messages, up to 20 folders in addition
to "Outbox" "Unsent" folder and the folder for Message iαppli can be created respectively.
ae1 or 4-5
me1
Changing folder setting : Place the cursor on the
folder and me3
Changing the order of the folder : Place the cursor
on the folder and me7 or 8
Set the required itemsep
Mail
135
F905i_E2kou
F905i.book
Page 136
Monday, April 21, 2008
10:53 AM
◆ Moving received/sent/unsent mail to
another folder
• Mails can be copied to microSD memory card.➝P294
◆ Sorting received/sent mail
The sorting order of the mail list in Inbox and Outbox can be
changed temporarily. When the list display is closed, sorting
is restored to "By date".
Moving a mail
ae1 or 4-5eSelect a folder
Place the cursor on the mail and
me411
Moving selected mails :
me412eSelect mailsep
ae1 or 5eSelect a folder
1 -4
geSelect the destination foldere"Yes"
Sorting sent mails : me5
The sorting order of the mail list changes temporarily.
Moving all mails in a folder : me413
me74
◆ Changing read/unread state of received
mail
• Read/unread state of received mails protected cannot be
changed.
Changing a mail from unread to read
ae1eSelect a folder
Place the cursor on the received mail to change
the state and me51
Changing a mail from read to unread : Place the
cursor on the mail and me52
Changing selected mails from unread to read :
me53eSelect mailsepe"Yes"
Changing selected mails from read to unread :
me54eSelect mailsepe"Yes"
Changing all mails in a folder to read :
me55e"Yes"
Changing all mails in a folder to unread :
me56e"Yes"
136
Mail
F905i_E2kou
F905i.book
Page 137
Monday, April 21, 2008
10:53 AM
◆ Protecting received/sent mail
◆ Deleting mail
❖ Deleting received mail
Protecting a mail
ae1 or 4-5eSelect a folder
Place the cursor on the mail and
me31
• The status icon changes to one of the followings :
Inbox :
(Read),
(Unable to reply),
(Replied),
(Forwarded)
Outbox :
Unsent message :
Protecting selected mails :
me32eSelect mailsep
• Each time you press m, you can select/deselect all
mails collectively.
Protecting all mails in a folder : me33
Unprotecting a mail : Place the cursor on the mail
and me34
Unprotecting selected mails :
me35eSelect mailsep
Unprotecting all mails in a folder : me36
ae1
• To delete all mails, press m46, perform
authentication and go to Step 4.
Select a foldereme2
• To delete a received mail, place the cursor on the
received mail to delete and press m2.
1-7
Deleting selected mails : 2eSelect mailsep
Deleting all mails in a folder : 4eAuthenticate
"Yes"
❖ Deleting sent/unsent mail
Deleting a mail
ae4 or 5
Select a folderePlace the cursor on the mail
and me21
Deleting selected mails :
eme22eSelect mailsep
Deleting all mails in a folder : Select a
foldereme23eAuthenticate
Deleting all mails : me42eAuthenticate
"Yes"
Mail
137
F905i_E2kou
F905i.book
Page 138
Monday, April 21, 2008
10:53 AM
Mail logs
Phonebook new entry➝P75, 76
Using message logs
Making calls : n or t
Useful functions of Mail
Displaying redial/received call logs : p
• Up to 30 items can be recorded for each of sent mails and
received mails. When exceeding the limit, record is
overwritten chronologically.
◆ Displaying message logs
MENU [Phonebook & Logs] 81
MENU [Phonebook & Logs] 82
Displaying Sent message logs
rep
• Select the party to display details screen.
cea
dcea
Sent msg log list
Sent msg log details
a Page/Total pages (list screen), Log No./
Number of items (details screen)
b Sent/received date and time (Local date and
time when staying overseas)
c Message log type
: i-mode mail
: SMS
d Sent msg log recorded while staying overseas
(except GMT+08:00)
Only a screen of sent message log appears.
• This may not appear, for example, when
sending date and time is not recorded.
e Mail address icon in Phonebook (i-mode mail)/
phone number icon (SMS) (if saved in
Phonebook), mail address (i-mode mail)/phone
number (SMS)
f Name, Image
Displaying received message logs : lep
❖ Using message logs
Creating i-mode mail : Place the cursor on the log to send
mail to and aeEdit the mailep
Creating SMS : Place the cursor on the log and a (1 sec.
or more)eEdit SMSep
Adding to phonebook :
a Place the cursor on the log to add to Phonebook and
me4
• To add data to an existing phonebook entry, press
m5.
b 1 or 2eSave the name or mail address, etc.
138
Mail
F905i_E2kou
F905i.book
Page 139
Monday, April 21, 2008
10:53 AM
◆ Deleting message logs
Deleting a mail
On the sent/received msg log details screen,
place the cursor on the message log to delete
and me61
Deleting selected entries : On the sent/received msg
log details screen, me62eSelect
message logs to deleteep
◆ Copying texts
You can copy characters in mail. Copied characters can be
pasted in entry fields in the mail creation screen or phonebook
data entry screen.
• The last copied item is recorded until the power is turned
OFF and they can be pasted any number of times.
• To copy a selected item, place the cursor on the item
Deleting all entries : On the sent/received msg log
details screen, me63eAuthenticate
"Yes"
ae1 or 5eSelect a foldereSelect a
maileme2
to copy and press m2.
Select a copy option.
Copy text : Copy a specified range of characters.
Copying➝P367 Step 2 and the following steps in
"Copying/cutting characters"
Copy title : Copy the title.
Copy selected item : Copy selected items (mail
address, phone number, etc.).
Pasting characters➝P367
Useful functions of Mail
◆ Making call from mail
For SMS or mail that the address is "phone
number@imode.net.tw", a call can be made without saving.
Making a call
ae1 or 4-5eSelect a
folderePlace the cursor on the mail and
me6
Set a condition for dialingem
Making a call under set conditions➝P51
◆ Adding phone number, mail address and
URL in the phonebook
Adding a phone number
ae1 or 5eSelect a foldereSelect a
mail
Place the cursor on the phone number and
me41e1 or 2
Adding to existing phonebook entry : Place the
cursor on a phone number and
me42e1 or 2eSelect
phonebook data
Save the name or mail address, etc.
Phonebook new entry ➝P75, 76
◆ Adding URL as bookmark
ae1 or 5eSelect a foldereSelect a
mailePlace the cursor on the URL and
me43eSelect a folder to add to
Mail
139
F905i_E2kou
F905i.book
Page 140
Monday, April 21, 2008
10:53 AM
The next procedure➝P153 Step 2 in "Recording in
Bookmark"
Registered sort criteria
(In the order of priority levels)
SMS settings
• Icon definitions :
Setting SMS
MENU [Mail] *7
You usually do not need to change SMSC, Address
and Type of Number settings.
ae*7eSet the required itemsep
Font type : Select message of Chinese or English
language to be sent. The maximum number of
characters that can be sent differs depending on the
font type.
SMS report request : Select if you request SMS report
request when sending SMS.
Keep in SMS center : Select the storage period of sent
SMS in the Short Message Center in cases the
receiver cannot receive the SMS.
SMSC : Select SMSC when using SMS services except
DoCoMo.
Type of Number : Select from "international" or
"unknown".
• If selecting "Others" in SMSC field and setting
numbers for Address, Type of Number needs to be
set to "unknown".
Setting Mail
Mail settings
Setting mail function of the terminal
◆ Sorting mail automatically into designated
folders
MENU [Mail] *3
• Up to 30 sort methods for Inbox and Outbox can be
registered.
• Ordinary mails can also be sorted to the folder for Message
i-αppli, but message i-αppli sorting method takes
precedence.
❖ Enabling/disabling sorting automatically
ae*3e1eSet the required
itemsep
❖ Setting sort methods
• To set and activate sort method, turn Auto—sort ON/OFF
"ON".➝P194
140
Mail
ae*3e2 or 3
: Sent mail address
: Received mail address
: Ph.book number
: Not in phonebook
: Subject
: Ph.book group
: No method
F905i_E2kou
F905i.book
Page 141
Monday, April 21, 2008
10:53 AM
peSet sort rule
Specifying mail address :
• To select from message logs
a 11 or 12eSelect a message
log
• To select from Phonebook
a 13eSelect the phonebook data
• To enter directly
a 14eEnter a mail addressep
Specifying subject :
a 2eEnter the subjectep
Specifying Ph.book number :
a 3eEnter the phonebook
numberepeg
Specifying Ph.book group :
a 4e1 or 2eSelect a group
Specifying Not in phonebook :
a5
Specifying No method :
a6
Mail
141
F905i_E2kou
F905i.book
Page 142
Monday, April 21, 2008
10:53 AM
Select the folder to sort.
• When the folder for Message i-αppli is selected, a
message appears notifying the mails in the selected
folder is used for the i-αppli. Select "Yes" to set the
folder for sorting.
Select a priority level.
A new method is added to the selected row.
❖ Checking, changing or deleting sorting
methods
✔INFORMATION
• If multiple conditions are set, judgement is made from the
Operations for specifying sort method➝P194 Step 24 in "Setting sort methods"
b "Yes"
condition with higher priority and sorted to the folder that
matched for the condition first. A mail that was not matched for
any condition is saved in the "Inbox" or "Outbox" folder.
Changing sort priority : Place the cursor on the sort
method and me5eSelect the position to
move
❖ Setting sort methods from sent/received mails
ae1 or 5eSelect a folderePlace
the cursor on the mail and
eme84e1 or 2eCheck
the saved contentsep
The next procedure ➝P195 Step 3 and the following
steps in "Setting sort methods"
• When Auto-sort ON/OFF is "OFF", a confirmation
screen for setting to "ON" appears.
Select sorting rule.
Changing sort methods :
a Place the cursor on the sort method and
me 2
• To add the first method, select "Add last".
Checking
ae*3e2 or 3
Deleting :
a Place the cursor on the sort method and
me3 or 4
b "Yes"
◆ Setting mail signatures
MENU [Mail] 03
❖ Setting whether to insert signature
automatically
ae*51e1 or 2
❖ Registering signature
ae*52egeEnter the
Signatureep
◆ Adding address to mail group
MENU [Mail] 05
• Up to 20 mail groups can be added. Up to 5 mail addresses
can be added for 1 mail group.
ae*8
Creating a mail : a
The next procedure➝P170
Editing mail group names : Place the cursor on the
mail group and me2
Copying mail group : Place the cursor on the mail
group and me3
Deleting mail group : Place the cursor on the mail
group and me4e1 or 2e"Yes"
Operating mail address registered in a mail group :
Select a mail groupeGo to Step 5
142
Mail
Enter the mail group nameep
F905i_E2kou
F905i.book
Page 143
Monday, April 21, 2008
Select a mail group for registering a mail
address.
aeSet the required items
10:53 AM
Editing registered mail address : Place the cursor
on the mail address (or name) and
me1eEdit
Deleting a registered mail address : Place the cursor
on the mail address (or name) and
me2e"Yes"eGo to Step 7
Displaying details of registered mail address :
me3eWhen finishing checking geGo
to Step 7
◆ Setting Quick reply
MENU [Mail] *62
◆ Registering quick reply format
MENU [Mail] *63
• Up to 5 formats can be registered.
ae*63
Selecting a formateEnter a textepe"Yes"
Viewing the message text : Place the cursor on the
message text and p.
Deleting format : Place the cursor on the format and
me1e"Yes"
✔INFORMATION
• If no Address Type is set for TO, mail cannot be sent.
◆ Setting whether to quote message when
reply
MENU [Mail] 041
ae*62e1 or 2
ae*61eSet the required
itemsep
Resetting all formats :
me2eAuthenticatee"Yes"
Adding new format : ""eEnter
a textep
◆ Setting display style of mail list
MENU [Mail] *2
ae*2eSet the required itemsep
◆ Setting if you receive attachments
automatically
MENU [Mail] *9
• Files set not to receive automatically are received as
Receive option attachment files.➝P181
ae*9eSelect a file item to
receiveep
• "Tool data" indicates the data of phonebook,
bookmark and schedule.
• "Other" indicates Excel, Word, PowerPoint or other
data.
✔INFORMATION
• Images or melodies attached to message text are automatically
received regardless of this setting.
◆ Setting whether to play melodies
automatically
MENU [Mail] *0
ae*0e1 or 2
Mail
143
F905i_E2kou
F905i.book
Page 144
Monday, April 21, 2008
10:53 AM
◆ Selecting type of mail to display
You can display only the mails of specified type in the received
and sent mail lists temporarily. When the list display is closed,
sorting is restored to "Display all items".
ae1 or5eSelect a
foldereme72e1 or 2
◆ Changing mail font size
Change the font size to display mails from among the 5 types
of "Larger", "Large", "Medium (Standard)", "Small" and
"Smaller".
144
Mail
ae1 or 5eSelect a foldereSelect a
maileme31e1-5
◆ Setting mail reception notification for
terminal in operation
MENU [Mail] *4
You can set if you display a receiving screen, reception result
screen or Auto sending screen by priority when i-mode mail or
SMS is received during the terminal operation.
ae*4e1-3
Continue operation : Display none of the receiving
screen, reception result screen and sending screen.
Show message : Display the receiving screen,
reception result screen and sending screen.
Open:Cont/Close:Show : Continue operation when
the terminal is open and prioritizes reception
notification when the terminal is folded.
F905i_E2kou
F905i.book
Page 145
Monday, April 21, 2008
10:53 AM
SMS saved to UIM
◆ Displaying SMS in UIM
Saving SMS in UIM
◆ Moving/Copying SMS into UIM
MENU [Mail] 812
MENU [Mail] 813
ae81e2 or 3
• Maximum number of saved items➝P447
Moving a SMS
ae1 or 5eSelect a folder
Place the cursor on the SMS and
me421
a Page/Total pages
b Status icon
: Unread (able to reply)
: Unread (unable to
reply)
: Read (able to reply)
: Read (unable to reply)
: SMS report request, Missed call notification or
Notify recorded message
: SMS error
c Sent/received date and time
d Sender/Receiver
e Top of the message
Moving selected SMS :
me422eSelect the SMSep
Copying a SMS : Place the cursor on the SMS and
me431
Copying selected SMS :
me432eSelect the SMSep
"Yes"
Select SMS to display.
a Icon
: Received (able to reply)
: Received (unable
to reply)
: Sent
: SMS report request, Missed call notification or
Notify recorded message
: SMS in UIM
: SMS in SIM card (combined SMS)
: SMS in SIM card (combined SMS in an
incomplete status)
b Mail No./No. of msgs
c Icon
: Date and time
: Receiver
: Sender
: Sender (unable to reply)
: Subject "UIM Inbox" "UIM Outbox" "SMS report
request" "Notify missed call" "Answer videophone"
• When sent SMS is moved or copied to UIM, the sent
date and time are deleted from the sent SMS in the
UIM. Note that for sent SMS with SMS report request
set, the sent date and time are displayed.
• For the SMS which contains error, appears
instead of
and except
does not appear.
• When SMS is received while staying overseas
(except GMT+08:00), may appear at the end of the
receiving date and time.
Mail
145
F905i_E2kou
F905i.book
Page 146
Monday, April 21, 2008
10:53 AM
◆ Moving/Copying SMS in UIM to the terminal
Moving a SMS to the terminal
ae81e6 or 7
Place the cursor on the SMS and
me31
Moving selected SMS : me32eSelect
the SMSep
Copying a SMS : Place the cursor on the SMS and
me33
Copying selected SMS : me34eSelect
the SMSep
geSelect the destination foldere"Yes"
✔INFORMATION
• When the memory is not enough or the maximum number of
saved items is reached, SMS cannot be moved or copied.
Unprotected i-mode mail and/or SMS, if any, are not
overwritten. Delete unnecessary i-mode mail and/or SMS from
folders of Inbox and Outbox.
◆ Deleting SMS from the UIM
• When deleting a sent SMS, the corresponding SMS report
request in UIM is also deleted at the same time.
Deleting a SMS
ae81e6 or 7
Place the cursor on the SMS and
me21
Deleting selected SMS : me22eSelect
the SMSep
Deleting all SMS : me23eAuthenticate
Deleting all SMS report request :
me24eAuthenticate
146
Mail
"Yes"
F905i_E2kou
F905i.book
Page 147
Monday, April 21, 2008
10:53 AM
i-αppli
147
F905i_E2kou
F905i.book
Page 148
Monday, April 21, 2008
10:53 AM
When Software info disp. is "ON"
A confirmation screen of i-αppli information and
downloading appears.
• The detail information of the i-αppli to be downloaded
can be displayed by pressing p.
i-αppli
Downloading i-αppli from sites makes a terminal more
convenient. For instance, various games can be
downloaded to the i-mode terminal, direct registration to
phonebook and schedule from i-αppli can be made or
Data Box including saving and obtaining image can be
operated with some i-αppli.
Downloading i-αppli that uses the saved data, the
serial number of your mobile phone/UIM card or
microSD memory card
Downloading confirmation screen appears.
• With "Guide" displayed on the guide area, press p
to check details of the data used by the i-αppli.
✔INFORMATION
• Any image or movie saved by i-αppli or i-αppliDX is saved in "i-
•
When the selected i-αppli is already downloaded.
A message indicating that the data is already
downloaded appears. When the new version of the iαppli is released, upgrading confirmation screen
appears.
mode", "Deco-mail picture" or "Deco-mail pict" folder of My
Picture, "i-mode" folder of i-motion or added album respectively,
or in the i-αppli.
When ring tone is saved by i-αppliDX, it is saved in "i-mode"
folder of Melody or in the i-αppli.
Downloading i-αppli
You can download i-αppli from sites and store it in the
terminal.
• Not saved if downloading of i-αppli fails due to poor signal
quality, etc.
• The maximum size of i-αppli that can be saved is 1 Mbyte.
Displaying a siteeSelect an i-αppli
The selected i-αppli is downloaded.
• While downloading, press g and select "Yes" to
stop downloading.
• When download or communication is interrupted,
resuming confirmation screen may appear. Select
"Yes" to restart downloading; when "No" is selected,
partial saving confirmation screen appears if it is
possible. If partial saving is impossible, data already
downloaded is deleted. The rest of partially saved iαppli can be downloaded.➝P213 Step 3 in "Starting
i-αppli"
When the selected i-αppli is already downloaded
with a different UIM
Overwriting confirmation screen appears.
Select a destination to save.
• Some i-αppli shows setting screens for Set stand-by
disp. (i-αppli stand-by) or Use network.
Setting items ➝P215 Step 1 in "Setting operating
condition of i-αppli"
"Yes"
The downloaded i-αppli starts.
• Select "No" to return to the site screen.
• When setting "Set stand-by disp." to "Yes", setting
confirmation screen appears.
✔INFORMATION
• Even when downloading failed, deleted i-αppli or data deleted
at the same time from microSD memory card are not restored.
◆ Viewing i-αppli information when
downloading
You can set if you display i-αppli information when
downloading i-αppli.
148
i-αppli
me[i-αppli]e23e1 or 2
F905i_E2kou
F905i.book
Page 149
Monday, April 21, 2008
10:53 AM
download is disabled, the i-αppli partially saved may
be deleted.
• To quit i-αppli, operate in the procedure specified for
each i-αppli. You can also quit i-αppli by pressing
f and then selecting "Yes".
Starting i-αppli
MENU [i-αppli] 1
d (1 sec. or more)
✔INFORMATION
• Some i-αppli may have different display area, screen mode may
Select a folder.
• Icon definitions :
not be changed by rotating the display.
: Preinstalled folder without i-αppli
: Preinstalled folder with i-αppli
: Created folder without i-αppli
: Created folder with i-αppli
• i-αppli that vertical and horizontal (or vice versa) size is less
•
Select i-αppli to start.
•
•
•
•
than 432×240 dots are displayed with horizontal and vertical
size doubled.
On a full-screen or wide display giving 864 vertical or horizontal
dots, each pressing of side key [S] switches displaying and
hiding the battery icon.
The volume of sound emitted during i-αppli operation can be
adjusted. Note that some i-αppli have no sound.➝P88, 216
Images used on i-αppli (shot using the camera from i-αppli,
obtained using the i-αppli infrared communication function) or
the data you entered may be sent to the server via Internet.
Partially saved i-αppli is allowed displaying software
description, deletion and folder change.
i-αppli that uses microSD memory card can save data in it. Data
saved in microSD memory card may not be available for other
models. i-αppli that uses microSD memory card can be viewed
with "i-αppli data".➝P299
Graphical display
• Icon definitions (Only marks with * are displayed in IC
card content.)
: Message i-αppli
: i-αppliDX
(orange) : i-αppli
: i-αppli setting available for i-αppli stand-by
display
: i-αppli set for i-αppli stand-by display
: i-αppli with Auto start setting
(Upper half in gray, lower half in orange) : i-αppli
partially saved*
: i-αppli unavailable due to UIM operation
restriction*
: i-αppli of stopped condition by IP (Information
Provider)*
: i-αppli downloaded from SSL page
: i-αppli set as one-key shortcut
- : i-αppli set as two-key shortcut
/ /
: Search by i-mode (Displayed in
preinstalled folder and IC card
• Each time you press t, display view switched in
the order of graphical display➝list
display➝thumbnail display.
• When "Confirm every session" is Set NW
transmission of the i-αppli to be started, connection
confirmation screen appears.
• When partially saved i-αppli is selected, downloading
confirmation screen of the rest appears. The i-αppli
can be started after the rest is downloaded; when
i-αppli
149
F905i_E2kou
F905i.book
Page 150
Monday, April 21, 2008
10:53 AM
• i-αppli may be interrupted when any of the conditions below
•
•
•
occur. Upon completion of the current operation, i-αppli
restarts; selecting "i-αppli" after pressing s allows to restart
i-αppli while continuing the current operation (except for the
ones marked with *). Some i-αppli may not return to the state of
interruption.
- When a voice call comes in
- When a videophone call comes in*
- When Lock on close is activated*
- When the function is switched over to another function
When you are out of service area or the saved data cannot be
used, i-αppli may not start or not operate correctly.
For certain i-αppli, the IP (Information Provider) may access iαppli saved in the mobile phone and directly set operation
disabled state. In such a case, i-αppli startup, stand-by display
settings, upgrading, etc. are disabled, enabling only deletion
and software description display. To resume using i-αppli,
notification of i-αppli enabled must be received; contact the IP
(Information Provider).
For certain i-αppli, the IP (Information Provider) may send data
to i-αppli saved in the mobile phone.
◆ Displaying history when operation finishes
without using saved data
When i-αppli ended with an error because i-αppli cannot use
the saved data, the name of the i-αppli, date and time, and
cause of security error are recorded.
• Up to 20 items can be recorded. When exceeding the limit,
record is overwritten chronologically.
me[i-αppli]e33
• To delete histories, press p and select "Yes".
◆ Displaying i-αppli Description
d(1 sec. or more)eSelect a folderePlace
the cursor on the i-αppli and p
• Displayed items differ depending on i-αppli.
• To check the site certificate of the i-αppli downloaded
from SSL page, press p on the Software
description screen.
◆ Setting operating condition of i-αppli
d(1 sec. or more)eSelect a folderePlace
the cursor on the i-αppli and
me6eSet the required itemsep
✔INFORMATION
• If you set "No" for Set NW transmission, the i-αppli may not be
•
started and timely information such as stock prices or weather
forecast may not be provided by i-αppli.
If you set "Yes" for Use icons, since icons for unread messages,
remaining battery level, Silent mode, and antenna icon may be
sent to IPs (Information Providers) through the Internet, it may
give the information to a third party. Some i-αppli requiring icons
may not operate when "No" is set.
◆ Setting operations while i-αppli is active
❖ Setting Display light
me[i-αppli]e24e1 or 2
Terminal Setting : The light is turned ON according to
Display light of Display.
Software : The light is turned ON according to the iαppli.
150
i-αppli
F905i_E2kou
F905i.book
Page 151
Monday, April 21, 2008
10:53 AM
❖ Setting vibrator
◆ Using preinstalled i-αppli
Set if you allow the vibrator operation by i-αppli.
(TBD)
me[i-αppli]e25e1 or 2
❖ Setting power saving
Set brightness of the display, key lighting and volume.
Presetting
Starting i-αppli quickly
i-αppli can be started by a simple operation from the
stand-by display.
me[i-αppli]e27
◆ Setting i-αppli to one-key/two-key shortcut
1e1 or 2
• You can register one item of one-key shortcut.
• You can register one item of two-key shortcut for each key
• "Power saved mode" sets the brightness to
"Brightness 1", Key lighting to "OFF" and Effect sound
volume to "Level 1" (not changed if set to "Silent").
For "Default mode", this function resets each setting
to default state.
Changing brightness : 2e1-6
Changing Key lighting : 3e1 or 2
of keypad, up to 10 items in total.
Changing volume : 4eSide key [ST] or
keg
◆ Starting another i-αppli from i-αppli
Some i-αppli can start specified i-αppli and allow to enjoy iαppli without returning to the Software list.
This terminal is compatible with feeling games, and
operations can by performed by tilting or shaking the terminal.
• While playing the game, do not cover In-camera with your
hand, etc. Tilt, etc., may not be detected.
d (1 sec. or more)eSelect a folder
Place the cursor on the i-αppli and
me82
Setting i-αppli shortcut : Place the cursor on the iαppli to set and me81
• Same operations are required also for canceling.
Select a destination to save.
• Icon numbers (
- ) correspond to keypads
(0-9) used to activate two-key shortcut.
• When a destination already set is selected,
overwriting confirmation screen appears.
Start another i-αppli from i-αppli
◆ Motion tracking
Setting two-key shortcut
◆ Starting i-αppli using one-key/two-key
shortcut
Starting i-αppli using two-key shortcut
0-9ed (1 sec. or more)
Starting i-αppli using one-key shortcut : g (1 sec.
or more)
Automatically starting i-αppli
◆ Specifying whether to start automatically
Set all i-αppli, which are set to "ON" for User in Set auto start
info., at once to start automatically.
me[i-αppli]e22e1 or 2
◆ Setting date and time of Auto start
d(1 sec. or more)eSelect a folderePlace
the cursor on the i-αppli to set and
me5eSet the required itemsep
i-αppli
151
F905i_E2kou
F905i.book
Page 152
Monday, April 21, 2008
10:53 AM
User : Select if you perform Auto start with the
conditions below.
Time : Enter the time to automatically start the i-αppli.
Repeat : Set the condition for repetitive Auto start of the
i-αppli.
Weekly : Set the day of the week for Auto start when
"Weekly" is set for Repeat.
Date : Set the date for Auto start when "Onetime" is set
for Repeat.
Software : Specify if you automatically start at the
intervals preset for the i-αppli.
i-αppli 1-4 : Depending on i-αppliDX, up to 4 conditions
of Auto start can be set while it is running. Specify if
you enable those settings.
✔INFORMATION
• Even with Auto start set, automatic activation does not occur in
•
the cases below, causing
to appear on the stand-by display
and to be recorded in Start failure hist.
- When the screen except the stand-by display appears
- UIM operation restriction is set (except for preinstalled i-αppli)
- When UIM cannot be detected
- When the interval of Auto start is too short
- When All lock, Personal data lock or Privacy mode is ON (when iαppli is "Authorized access")
- When the i-αppli usage is stopped by IP (Information Provider)
Even if you change "Repeat" of multiple i-αppli to set them start
automatically at the same time, only one of them can be
activated at one time. The information of the i-αppli that failed to
be activated is recorded in Auto start failure log, however,
does not appear on the stand-by display.
◆ Displaying history when Auto start of iαppli fails
When Auto start of the i-αppli fails,
appears on the standby display and the name of the i-αppli, date and time, and
causes are recorded.
• Up to 20 items can be recorded. When exceeding the limit,
record is overwritten chronologically.
• When displaying Start failure hist. or when the next Auto
start is successful,
on the stand-by display disappears.
me[i-αppli]e31
• To delete histories, press p and select "Yes".
i-αppli To
Starting i-αppli from site or mail
Select a link item enabling to start i-αppli of
the site or i-mode mail e"Yes"
✔INFORMATION
• i-αppli not saved in the terminal cannot be started with i-αppli
•
•
•
•
To. Some i-αppli can be started immediately after being
downloaded from a site, without saving.
Partially saved i-αppli cannot be started from mail with i-αppli
To.
For i-αppli starting just after downloading from sites,
communication confirmation screen while they are activated
may appear.
Some i-αppli program may not be saved in the terminal.
If the i-αppli is set not to start with i-αppli To, the i-αppli cannot
be started.ŮP215
i-αppli stand-by display
Operating i-αppli stand-by display
When the i-αppli is set for the stand-by display, you can
start the i-αppli from the stand-by display to operate.
152
i-αppli
F905i_E2kou
F905i.book
Page 153
Monday, April 21, 2008
• While displaying i-αppli stand-by display,
or
10:53 AM
appears
on the top of the display in gray.
• Setting i-αppli stand-by display➝P94, 215
✔INFORMATION
• When upgrading i-αppli, data such as game scores stored in i-
◆ Starting i-αppli of i-αppli stand-by display
• Some i-αppli may inquire the server about the availability
On the i-αppli stand-by display,
ceOperate the i-αppli
αppli may be erased.
•
depending on the length of time of use and number of times of
use. If the server gives a notice of the i-αppli having been
updated, it can be upgraded after confirming if you upgrade it.
Some i-αppli is automatically upgraded.
✔INFORMATION
• When the terminal is turned ON while setting the i-αppli stand-
•
•
by display, activating confirmation screen of the i-αppli stand-by
display appears. The display starts when "Yes" is selected or no
operations are performed for approximately 5 seconds.
Selecting "No" cancels i-αppli stand-by display.
Note that when the power is turned ON by Auto power ON, the
i-αppli stand-by display automatically appears, without
displaying the confirmation screen.
When setting i-αppli that performs communication, to i-αppli
stand-by display, it may not operate correctly depending on
conditions such as signal quality.
When an error that cancels the i-αppli stand-by display occurs,
canceling confirmation screen for the i-αppli stand-by display
appears. If you select "Yes", it is canceled and recorded in
Abnormal exit hist.
◆ Quitting i-αppli and returning to the i-αppli
stand-by display
While running i-αppli, fe"End"
◆ Displaying exit history of i-αppli stand-by
display
When an error that cancels i-αppli stand-by display occurs,
the name of the i-αppli, date and time can be recorded.
• Up to 20 items can be recorded. When exceeding the limit,
record is overwritten chronologically.
me[i-αppli]e32
• To delete histories, press p and select "Yes".
Managing i-αppli
Various functions such as i-αppli upgrade, creating folder
and deleting unnecessary i-αppli for easier use of i-αppli
are available.
◆ Upgrading i-αppli
When the i-αppli is updated, upgrade is available.
d(1 sec. or more)eSelect a folderePlace
the cursor on the i-αppli and
me4e"Yes"
i-αppli
153
F905i_E2kou
F905i.book
Page 154
Monday, April 21, 2008
10:53 AM
◆ Creating/deleting folders
❖ Creating folders
• Up to 20 items can be registered.
me4
Changing the order of the folder : Place the cursor
on the folder and me5 or 6
Enter a folder nameep
❖ Deleting folders
• Preinstalled folders cannot be deleted.
d (1 sec. or more)ePlace the cursor on the
folder and me21
• When i-αppli is contained in the folder, perform
authentication.
"Yes"
◆ Moving i-αppli to another folder
Moving 1 item
d (1 sec. or more)eSelect a folder
Place the cursor on the i-αppli and
me31
Moving selected i-αppli : me32eSelect
an i-αppliep
Moving all i-αppli in the folder : me33
Select a folder to move toe"Yes"
◆ Deleting i-αppli
Deleting 1 item
d (1 sec. or more)eSelect a folder
Place the cursor on the i-αppli and
me21
Moving selected i-αppli : me22eSelect
an i-αppliep
Deleting all i-αppli in the folder :
me23eAuthenticate
"Yes"
◆ Sorting i-αppli
154
d (1 sec. or more)
Changing folder setting : Place the cursor on the
folder and me1
◆ Checking number of i-αppli in folder
me[i-αppli]e21e1-5
i-αppli
d(1 sec. or more)ePlace the cursor on the
folder and p
Icon definitions➝P213 Step 3 in "Starting i-αppli"
◆ Checking current settings of i-αppli
The settings such as saved number of i-αppli or i-αppli standby display can be checked.
d (1 sec. or more)ea
Software count : Total number of i-αppli saved is
displayed.
i-αppli display : Name and destination folder to save of
i-αppli set as i-αppli stand-by display are displayed.
One-key shortcut : Name and destination folder to
save of i-αppli registered for one-key shortcut are
displayed.
Auto start : Name of i-αppli, name of destination folder
to save i-αppli and start time of i-αppli set for the next
Auto start are displayed.
F905i_E2kou
F905i.book
Page 155
Monday, April 21, 2008
10:53 AM
i-αppli
155
F905i_E2kou
F905i.book
156
i-αppli
Page 156
Monday, April 21, 2008
10:53 AM
F905i_E2kou
F905i.book
Page 157
Monday, April 21, 2008
10:53 AM
i-αppli
157
F905i_E2kou
F905i.book
158
i-αppli
Page 158
Monday, April 21, 2008
10:53 AM
F905i_E2kou
F905i.book
Page 159
Monday, April 21, 2008
10:53 AM
Full Browser
159
F905i_E2kou
F905i.book
Page 160
Monday, April 21, 2008
10:53 AM
Displaying from bookmark : 2eSelect a
foldereSelect a bookmark to display
Full Browser
Viewing websites for PCs
Connecting from Entry URL log :
32eSelect a URLeg
MENU [i-mode] 7
You can connect to Internet to view websites created for
PCs.
Framed, CSS and SSL/TLS supporting websites can also
be viewed.
• Communications of large-size data such as viewing
websites containing many images and downloading require
high charges.
When you connect to the full browser for the first time, a
warning message will be displayed.
If you select "YES" the message will not be displayed for
subsequentc connections.
• Full Browser supports the functions and technologies
below :
Frame : A frame for dividing a web page or a website
configured with frames. A website with some frame
configurations may not be fully displayed.
Cookie : A function that saves website-specified
information such as the date and time the website
appears and the number of the times it is visited in the
terminal. Based on such information, various functions
on the website can be easily used.
CSS : A standard that defines the layout of web pages.
JavaScript : A language for creating websites.
Referer : URL information of a website from which a link is
selected to move to a website specified in it.
SSL/TLS : A technology for securing safe data
communications with authentication/encryption. A
website that supports SSL/TLS has URL beginning with
https://. In some cases, it is used in a part of a website.
Connecting to website at specified address
(URL)
de7
31eEnter a URLep
• In alphabet input mode, repeatedly press 1 to
enter ".", "/", "-", etc. and * to enter
"@imode.net.tw", ".com", ".com.tw", ".net.tw",
".edu.tw", ".org.tw", ".gov.tw", "http://www.", "https://
www.", "www.", ".asp", ".html", ".htm" or ".php".
• When "No" is set in Access setting such as by default,
the Access setting screen appears.➝P275
• From the second time, the URL previously connected
appears.
• Press c or m9 to stop connecting or
m8 to stop connecting with multiple windows.
Connecting to Home : 1
Setting URL for Home connection➝P274
160
Full Browser
Connecting to Browser history : 4eSelect a
URLeg
After reading a website, fe"Yes"
✔INFORMATION
• The functions below are not supported :
•
•
- Displaying Flash graphics
- Playing sound
- Plug-in
- Saving screen memos
- Phone To (AV Phone To), SMS To, Media To
Some websites may take extra time to be displayed or not be
displayed correctly.
When displaying a site including an image, the icons below may
appear instead of the image :
: When Image is set to "Not display" in Image display
: When the image data is invalid or the image cannot be
found, or when the image cannot be received because the
terminal goes out of service area during reception
: When the image cannot be displayed for an incorrect URL,
etc.
F905i_E2kou
F905i.book
Page 161
Monday, April 21, 2008
10:53 AM
◆ Viewing screen of Full Browser
* : In the horizontal display, switching displays with/
without the guide area
• When "Full screen view" is selected in Screen view
setting, pressing * on the vertical display to switch
the guide area.➝P275
Switching display modes : pe4
Display mode setting➝P274
Displaying key operation list : pe8
Adding the displayed website as bookmark :
me21eSelect a folder to add to
Recording bookmark➝P153
Full Browser screen (Vertical display)
Connecting to Home : me1
Displaying from bookmark : me22eSelect a
folder
Displaying from bookmark➝P153
Connecting by specifying URL : me31eEnter
the URLep
Full Browser screen (Horizontal display)
a Status display/Title or URL
(Light blue) : Acquiring
: In thumbnail display of framed website➝P272
: In frame enlarged display➝P272
(Dark blue) : Acquiring another frame during enlarged
display of current frame
: Downloading Word, Excel or PowerPoint files
b / : Display mode (PC mode (full scale)/Mobile
mode)➝P274
: In Window Open Guard➝P274
c Pointer➝P272
d Section map
The current position relative to the whole display appears
temporarily at connection or scrolling screen (except in
thumbnail display). The size of section map of PC mode
may change during downloading the page or vary by
websites.
❖ Key operations on Full Browser screen
k, 1-4, 6-9 : Scrolling
• Depending on the display mode, keys available for
scrolling differ.➝P274
t, a : Displaying previous/next pages
• The operation is enabled only in PC mode with the
pointer hidden.
0 : Searching➝P273
5 : Switching zooming factor
• Settings of zooming in/out remain after exiting Full Browser.
# : Switching pointer display/hide➝P272
Connecting from Entry URL log :
me32eSelect a URLeg
Connecting to Browser history :
me33eSelect a URLeg
Reloading information : me4
Creating message with the URL of the displayed website
pasted in the message text : me6
Viewing information : me8e1-3
Certificate➝P163
Setting image display : me84
Image display➝P275
Switching character encode : me851
• Each pressing of m851 causes to change
character encode as SJIS➝EUC➝JIS➝UTF8. Press
m852 to switch to "Auto switch".
Playing animation from the beginning : me86
Making Window open guard valid/invalid :
me87e"Yes"
Script setting➝P274
Checking section map : me88
Setting color or display of section map :
me89e1-4
✔INFORMATION
• When you change the zooming factor while displaying multiple
•
websites with Multi window, the change applies only to the
currently active window.
Operations for selecting link destinations and items are the
same as those for i-mode.➝P150
Full Browser
161
F905i_E2kou
F905i.book
Page 162
Monday, April 21, 2008
10:53 AM
◆ Switching display of pointer
While displaying the pointer, you can move on a screen by
operating the pointer with k. Hold down to move quickly.
• Settings of displaying/hiding the pointer remain after exiting
Full Browser.
On the Full Browser screen containing
frames, select a frame to be enlarged.
• Use j to move to the frame. In PC mode, h also
can be used to move to the frame.
• While displaying the pointer, you can select the frame
to enlarge by operating the pointer with k.
On the Full Browser screen, #.
In thumbnail display
In frame enlarged display
• Press c to return to the thumbnail screen.
a Moving range
The pointer can be moved in this range. On some
frames, the range the pointer can move may be
limited.
b Pointer
When moving near the end of the window, the screen
scrolls.
c Displayed when the item can be selected by the
pointer.
• You can switch displaying/hiding the pointer each
time you press #.
◆ Displaying multiple websites
You can view a website selected from a maximum of 5
websites displayed.
Displaying a website link on a new window
On the Full Browser screen, place the cursor
on the link and pe35
On stand-by
Displaying
❖ Switching to drag mode for operation
You can switch to drag mode during pointer display to operate
contents available in drag mode.
• Operations available in drag mode vary by contents.
Move pointer onto contentseg (1 sec. or
more)
Pointer changes from
to , and you can operate
contents with k.
• Press and hold g (1 sec. or more) again to return to
pointer display.
◆ Displaying a framed website
When a framed website appears, a thumbnail screen appears
allowing to view the entire configuration. Individual frames can
be enlarged for viewing.
• During thumbnail display, the operations and settings
below are disabled :
- Scrolling screen
- Search
- Save image, Word, Excel or PowerPoint files
- Link display
- Section map check/setting
162
Full Browser
• Press side keys [ST] to switch a window. A window
to switch to can be selected from a window list by
pressing and holding side keys [ST] for 1 second or
more or pressing p1.
• To close the current window, press p2 and
select "Yes".
F905i_E2kou
F905i.book
Page 163
Monday, April 21, 2008
10:53 AM
◆ Searching for a character string displayed
on website
On the Full Browser screen, 0eEnter
characters in the search fieldeg
The set character string is searched for and character
strings matching the entered string are highlighted.
• Press t to move to the previous option and a to
move to the next option (matched string).
• Press p to end searching.
◆ Downloading images
You can save images in GIF, JPEG, PNG or BMP format
displayed on websites.
• The maximum size of an image file that can be saved is 500
Kbytes.
• PNG and BMP format images can be saved in "Other"
folder of microSD memory card, but cannot be displayed.
The next procedure➝P157 Step 2 and the following
steps in "Downloading images"
• When placing the cursor on the image to save, the
image is surrounded by frames and the title and the
file size are displayed.
Setting search method : On the Full Browser screen,
0emeSet the required itemsep
Search method : Select "Partial match" or "Exact
match" for Search method.
Case-sensitive : Select if you make case-sensitive
search.
◆ Uploading images
You can upload images in GIF or JPEG format saved in the
terminal to a website.
• The maximum allowable size of an image file uploaded is
80 Kbytes and the total size of images and character
strings, if contained, is limited to 100 Kbytes.
On the Full Browser screen, "Browse".
✔INFORMATION
• Background images cannot be downloaded.
• Images with horizontal and vertical (or vice versa) sizes larger
•
•
than 864× 480 in GIF format or 1,728× 2,304 in JPEG format
cannot be saved in the terminal. Some images cannot be saved
depending on the JPEG type.
Even a file of an allowable file type and size may not be saved
from some websites.
When exceeding maximum number of saved items/maximum
area➝P306
• "Browse" button appears when the terminal can
upload images. It appears as a different mark when
the same website appears on a PC, etc.
On the Full Browser screen
me5eSelect an image to be saved
Select a foldereSelect an image to upload
• When microSD memory card has been inserted,
select "Phone memory" or "microSD".
• When editing or canceling the selected image, select
"Browse" button again and select "Change" or
"Cancel".
✔INFORMATION
• Procedures for uploading vary by websites.
• You cannot upload images inhibited to output from the terminal
or data except images or character strings.
◆ Downloading Word, Excel or PowerPoint
files
You can save Word, Excel and PowerPoint files displayed on
websites.
• The maximum size of data file that can be saved is 500
Kbytes.
• Word, Excel or PowerPoint files can be downloaded only
when microSD memory card is inserted.
• File of Word 2007, Excel 2007 or PowerPoint 2007 cannot
be downloaded.
On the Full Browser screen, select data to
download.
• You can stop downloading by pressing c or
m9 and selecting "Yes". You can stop
downloading all data with multiple windows by
pressing m8.
"Save"
Displaying : "Preview"
Canceling saving : "Back"e"No"
Full Browser
163
F905i_E2kou
F905i.book
Page 164
Monday, April 21, 2008
10:53 AM
Enter a display nameep
• When "
" appears in the lower-left corner of the
guide area, the save destination can be switched by
pressing t.
• Word, Excel or PowerPoint files are saved in a folder
of Other in the terminal or "Other" folder in microSD
memory card. If Other in the terminal has multiple
folders, a screen appears asking to select a saving
folder. The files are saved to a selected folder.
✔INFORMATION
• Downloading stops when the downloaded data size exceeds
500 Kbytes during downloading.
• When exceeding maximum number of saved items/maximum
area➝P306
Select the Cookie fielde1-3
• When "Valid(notify)" is selected, select the Notify field
and then select the timing to notify of information
sending/receiving from "Sending", "Receiving" or
"Sending/receiving".
Deleting all Cookie data :
meAuthenticatee"Yes"
✔INFORMATION
• When UIM is replaced with another one, Cookie is set to
"Invalid". If "Valid" or "Valid(notify)" is set at this time, a
confirmation screen appears asking if you delete Cookie if
Cookie data saved in the terminal after authentication.
◆ Making Script settings