Contents
Manual Part 1 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1061499 |
| Application ID | s1odnN1/fqt+/ie103rlYw== |
| Document Description | Manual Part 1 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 205.95kB (2574349 bits) |
| Date Submitted | 2009-01-26 00:00:00 |
| Date Available | 2009-01-26 00:00:00 |
| Creation Date | 2009-01-20 13:24:44 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2009-01-20 13:27:29 |
| Document Title | F905i.book |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
F905i_E2kou F905i.book Page 33 Monday, April 21, 2008 10:53 AM ■ Removing aHolding the tab, pull out the tray until it clicks and carefully remove UIM. Attaching/removing battery pack • After turning the power OFF, fold the terminal and hold it Tab with your hand. • When the date and time is set with Auto time adjust set to "OFF" in Date & time, removing the battery pack may delete the date and time. UIM slot ✔INFORMATION • Forcing the UIM into or out of the terminal may damage UIM or ■ Attaching aRemove the back cover by sliding it about 2 mm in the direction of the arrow while pressing it with your thumb. Back Cover the tray. • If the tray is removed, press it straight along the guide rail inside the UIM slot with the UIM left detached. ◆ Security code of UIM Two security codes, "PIN code" and "PIN2 code", are set for the UIM. You can change the security codes by yourself.➝P108 ◆ UIM operation restriction This terminal is provided with the UIM operation restriction for protecting your or copyright data or files. • When files or data are downloaded from websites or data attached to mails are obtained to your terminal with the UIM card equipped, the UIM operation restriction is automatically set to these data or files. • With UIM replaced or no UIM inserted, data or files with the UIM operation restriction set cannot be displayed or played. For i-αppli with the UIM operation restriction set, no functions except deletion are available. • Data or files with the UIM operation restriction set cannot be transferred over infrared communication or copied/moved to microSD memory card. • Restricted data types are as follows : - Videophone call message, Movie memo - i-mode mail attachment files, images inserted to Deco-mail or signature, mail template containing data subject to operation restriction - Screen memo - i-αppli (including i-αppli stand-by display) - Images (including GIF animations and Flash graphics), imotion, data compatible with contents transfer, melodies, Chara-den, Word/Excel/PowerPoint files - Kisekae Tool - Chaku-uta® Full Track Music * "Chaku-uta" is a registered trademark of Sony Music Entertainment (Japan) Inc. Press here with your thumb bWith the label side of the battery pack face up, align the convex part of the battery pack with the concave part of FOMA terminal, insert the battery pack in the direction of a and press it in the direction of b until it fits. Concave part Battery Pack Convex part cBring the 5 tabs of the back cover to meet the cuts in FOMA terminal. Slide in the direction of d to fit in while pressing in the direction of c so that no gap is generated between FOMA terminal and the back cover. Back cover Before Using the Handset 33 F905i_E2kou F905i.book Page 34 Monday, April 21, 2008 10:53 AM ■ Removing aPerform Step a in Attaching battery pack. bHold and raise the battery pack tab in the direction shown by the arrow to remove the battery pack. by creating i-mode mail, activating downloaded i-αppli, using i-αppli stand-by display, performing data communication or multiaccess, using camera, playing movie/i-motion, obtaining or playing music with Music player, or doing other operations. ❖ Battery charge • Use only the dedicated F905i AC adapter. Tab ◆ Charging When using optional AC Adapter,read the related operation manuals beforehand. • The battery pack cannot be charged without an adapter. When charging the battery pack, attach it to the terminal. ■ Charging with AC adapter Charging the terminal The battery pack does not have a full charge at time of purchase. Use AC adapter for the terminal to charge the battery before using the terminal. • To get the maximum performance from F905i, use battery pack F10. • For handling the battery pack F10, see the battery pack manual. a Open terminal cap (a) of the terminal, hold the connector horizontally with the arrow facing upward and insert it to terminal. (b) b Unfold the AC adapter's power plug and insert it into a 110V AC outlet. c After charging has completed, disconnect the AC adapter from the outlet and press the release buttons on both sides of the connector and remove the connector horizontally from the terminal.❖ Charging times (approximate) The times below are the times for charging an empty battery pack with F905i's power switched OFF. Charging with the terminal ON or under low temperature requires longer time. AC adapter Approx. 150 min. ❖ Operation times on full charge (approximate) The times below vary by the charging method and operating environment. Continuous 3G stand-by time GSM Continuous 3G call time GSM Stationary (Auto) : Approx. 505 H Moving (Auto) : Approx. 330 H Moving (3G static) : Approx. 360 H Stationary (Auto) : Approx. 300 H Voice call : Approx. 190 min. Videophone call : Approx. 110 min. Approx. 200 min • Continuous call time indicates the approximate time that the phone can send or receive radio waves normally. • Continuous stand-by time indicates the approximate time that the phone can receive radio waves normally with F905i closed. Call, communication or stand-by times may be about half depending on factors such as the battery pack charging condition, function settings, operating environment such as ambient temperature, and signal condition in the area of use (whether the signal is weak or absent). Call, communication or stand-by times are reduced by performing i-mode communication. And, even with no voice calls or i-mode communications made, the continuous call and continuous stand-by times are reduced 34 Before Using the Handset Power plug 100V AC outlet Lamp Connector Charging jack Jack cap Release button AC adapter ❖ Operations and precautions for charging When charging starts, a charge start alert sounds, light turns ON and the battery icon on the display or sub-display blinks. When charging is over, a charge completion alert sounds, the light turns off and the battery icon stops blinking. • When resuming the battery charging, the light turns on in red. In some environments, the light may not light immediately when charging starts; this is normal and not a malfunction. However, if the light fails to light after a while, disconnect the terminal from the AC adapter, and then connect it again to start charging. Contact the sales outlet such as FET Service Center if the light fails to light for a while after charging starts. • If the light is used for mail reception, camera shooting, etc. during charging, the light turns to a different color, but it is lit in red soon. When the light blinks while charging in cases except these reasons➝P431 "Troubleshooting" F905i_E2kou F905i.book Page 35 Monday, April 21, 2008 10:53 AM • When attaching the fully charged battery pack to the Signal level icon terminal and connecting it to the AC adapter, the light may turn on for a moment and turn off. This is normal and not a malfunction. • During a call or a communication, in Silent mode or with Charge alert "OFF", the charge alert does not sound at start or completion of charge. Remaining battery level Checking remaining battery level Stand-by display A battery icon appearing on the top of the display shows an approximate remaining battery level. Icon Battery icon Received signal Strong level (Battery level 3) : Ample charge (Battery level 2) : Low charge. (Battery level 1) : Battery level very low. Charging required ❖ When battery is almost exhausted A message indicating low battery appears on the display. Pressing any one of g, c, f keys deletes the message temporarily. After a period of time, a battery alarm sounds from the speaker and all icons on the top of the display start blinking. The power is turned off after approximately 1 minute. These operations stop when charging starts; press f to immediately stop the battery alarm. • During a call, the message remains displayed and the battery alarm keeps sounding from the earpiece. After approximately 20 seconds, the call is terminated, the battery alarm sounds from the speaker and all icons on the top of the display blink. ◆ Checking remaining battery level by sound and display me8763 Outside the service area and where radio waves are hard to reach ❖ Turning power OFF f (2 sec. or more) ◆ Operations to perform after turning the power ON for the first time When turning the power ON for the first time, operate in the order of "AdvancedMode setting" ➝ "Initial setting". The settings made can be changed later. ❖ Default setting MENU [Settings & NW services] 779 • Always set Password. When p or c, f is pressed before setting terminal security code, a confirmation screen appears asking you to exit. If you exit by selecting "Yes", this confirmation screen reappears when the power is turned ON the next time. The battery level appears and the keypad sound (➝P90) is emitted depending on the battery level. After a while, the screen returns to the menu list. Set the required items on the initial setting screenep Date & time : Set the date and time.➝P40 Password : Change the terminal security code, after performing authentication.➝P107 Fingerprint : After performing authentication, register a fingerprint to be used for authentication.➝P109 Keypad sound : Set a confirmation sound to be generated when a key is pressed.➝P90 Text size : Specify size of characters for Phonebook or mail.➝P103 Power ON/OFF Turning power ON/OFF ❖ Turning power ON Weak f (2 sec. or more) Select language Switching to English me[Settings & NW services]e272e1 or 2 Before Using the Handset 35 F905i_E2kou F905i.book Page 36 Monday, April 21, 2008 10:53 AM ✔INFORMATION • The setting of Select language are saved to UIM. When a UIM • is replaced, the setting switches to that saved in the inserted UIM. Even if this setting is set to "English", the displayed menu may not be switched to English depending on the Kisekae Tool. Note that, when a Kisekae Tool in "Preinstalled" folder is set, a menu dedicated to "English" appears. Date & time Setting date and time me[Settings & NW services]e721eSet the required itemsep Infomation When you are setting the time and date, change the network to GSM to set up the time automatically. The following shows how to change the NW. • me[Settings & NW services]e92eSelect GSM If network is not GSM, change the Automatic Time/TimeDifference Correction to "OFF" and set up manually. ✔INFORMATION After setting the date and time with Auto time adjust set to "OFF", removing the battery pack or leaving it exhausted for a long time may cause the date and time to be deleted. In this case, set the date and time again after charging the battery. User information Checking your own phone number MENU [Phonebook & Logs] 9 You can check your phone number (My phone number), Name, Mail address, etc. 36 me[User information] Check during a call, etc. : s0 Before Using the Handset F905i_E2kou F905i.book Page 37 Monday, April 21, 2008 10:53 AM Voice/Videophone Calls 37 F905i_E2kou F905i.book Page 38 Monday, April 21, 2008 10:53 AM Making voice/videophone calls Videophone The videophone function is available between terminals that support DoCoMo's videophone. Phone conversations can be made between the terminals while looking at the other party's image using videophone. It is also possible to send still images, substitute images, Chara-den, etc. instead of camera image. • Videophone calls are only available at 64 kbps. • DoCoMo videophone specifications are conforming to "3G324M*2, an international standard prepared by 3GPP*1". The connection with the videophones of different specifications cannot be established. *1 3GPP (3rd Generation Partnership Project)…is an area standardization organization established to develop standard technology specifications for third generation mobile communications system (IMT2000). *2 3G-324M…An international standard for 3rd generation mobile videophone i Sending image quality No icon : Normal : Prefer motion speed : Prefer image quality j Sending/receiving status of audio/video : Sending/receiving audio : Sending/receiving video : Sending/receiving audio/video Speakerphone volume/listen volume - : Adjusting speakerphone volume/listen volume k Macro shooting No icon : OFF : ON (out-camera) l Call duration Displayed in the HH:MM:SS format Making voice/videophone calls • Always enter the area code even when calling from the same city when calling to a general subscriber phone. • Up to 80 digits can be entered. c : Delete 1 digit c (1 sec. or more) : Delete all digits ◆ Reading screen during a videophone call a b c Enter a phone number. Select a call type. Making a voice call : n Making videophone calls : t Your own image is displayed while the videophone call is connected. e- l a Main screen Display other party's image b Videophone icon c Speakerphone function : ON No icon : OFF d Sub screen Display your own image e Zooming : Standard- : 2× (in-camera) : Standard- : 16× (out-camera) f Status : Sending camera image : Sending Camera-Off image : Using Chara-den : Sending frame Sending still image : On hold : Respond and Hold : Recording message : Recording movie memo Action mode : Action : Action of Parts g Shooting mode : Standard : Backlight : Monotone : Sepia h Light No icon : OFF : ON (out-camera) 38 Voice/Videophone Calls • The charging begins when "Connected to videophone." appears on the screen. When ending the call, f. F905i_E2kou F905i.book Page 39 Monday, April 21, 2008 10:53 AM ✔INFORMATION • The charges are based on the rate for digital communication not for voice calls even when substitute image is sent instead of the camera image. • Any videophone call from the terminal to emergency call (112) with Auto redial as voice set to "ON" is automatically switched to a voice call. ◆ Putting calls on hold Putting the call on hold during a call lets you talk to someone without the caller hearing your voice. • The caller is charged for time spent on hold. During a call, g. • To clear voice call on hold, press g or n. • To clear videophone call on hold, perform any of the operations below : g : Redisplay the image sent before the call is put on hold t/n : Camera image is sent a : Substitute image is sent ◆ Adjust Listen volume during a call • The Listen volume adjusted during a call is reflected to "Listen volume" of Adjust volume. Enter a phone numberen (1 sec. or more) or t appears at the top of the display. • The procedure is the same when operating from the phonebook, Redial, Received calls, Recorded messages or Voice memos. • Press and hold t for 1 second or more to make a videophone call using speakerphone function with Speakerphone in Operation (Videophone settings) set to "OFF". • While making a call, ringing or talking on the phone, you can switch the speakerphone function ON/OFF by each pressing n. • Volume can be adjusted only by side keys [▲▼] during a videophone call. ◆ Using Voice clear/Voice slowing ❖ Switching Voice clear Measure the noise level during a voice call, and if the noise increases above the specified level, the other party's voice is automatically emphasized to be heard clearly. And, the volume is automatically increased also when your or other party's voice is low. • This item is set to "ON" by default. • This function does not operate while using Speakerphone function or in GSM/GPRS network. • The settings are retained after a call. During a voice call, me7 If you set Voice clear to ON, appears. When this does not operate with ON, it is displayed in gray. ◆ Using speakerphone function To make/receive videophone calls without using Speakerphone, change the setting of Speakerphone in Operation (Videophone settings). j or side keys [▲▼] during a voice call ❖ Switching Voice slowing During a voice call, adjust the other party's voice to be heard slowly by using the silence at intervals, to make it easier to be heard. When the other party speaks without intervals, the voice is heard at the normal speed. • This item is set to "OFF" by default. • If you set Voice slowing to ON, the quality of the other party’s voice, music or time tone may change. In such a case, set Voice slowing to OFF. • This function does not operate in overseas GSM/GPRS network. • The settings are canceled after a call. During a call, a. If you set Voice slowing to ON, appears. When this does not operate with ON, it is displayed in gray. Redial/Received calls Making a call using Redial/Received calls MENU [Phonebook & Logs] 6 MENU [Phonebook & Logs] 5 This function records call log (Redial) and Received calls of voice/videophone calls. • Up to 30 calls are recorded in each of Redial and Received calls. If the maximum number of saved items is exceeded, record is overwritten chronologically. Voice/Videophone Calls 39 F905i_E2kou F905i.book Page 40 Monday, April 21, 2008 10:53 AM • When calls are made to the same phone number, the latest call is recorded in the redial list for each of "Unspecified", "Notify", "Not notify" of Caller ID. r (Redial) or l (Received calls)ePlace the cursor on a party to redial • The details screen appears when placing the cursor on a number to redial. Reading Redial screen abcd abcd fg d Notify/Not notify for a caller ID : When Notify is set in Call option or Caller ID settings for phonebook entry : When Not notify is set in Call option or Caller ID settings for phonebook entry e Phone number*2/icon and name in the phonebook (if saved in the phonebook)*3 f Name (if saved in the phonebook) g Phone number icon in the phonebook (if saved in the phonebook), phone number*2 h Redial number/number of calls*4 i Image (if saved in the phonebook)*5 j Group icon *1 This may not appear, for example, when calling date/ time is not recorded. *2 For an international call, a plus sign "+" appears at the beginning of the phone number. *3 Displayed according to the settings of View preference. Reading Received calls screen abcd Redial list screen abcd Redial details screen a Calling date/time (local date/time when staying overseas) b Calling from overseas (except GMT+08:00)*1 c Types of outgoing call : Voice call : International voice call : Videophone call : International videophone call Received calls list screen Received calls details screen a Receiving date/time (local date/time when staying overseas) b Receiving call in overseas (except GMT+08:00)*1 c Types of incoming call : Voice call : International voice call : Videophone call : International videophone call : 64K data communication : International 64K data communication d Status icon : Missed call (unchecked) : Missed call (checked) : Recorded messages (unchecked)*2 : Recorded messages (checked)*2 e Ring time icon for missed call (details screen only)*3, ring time for missed call (On a list screen, "99”" appears for 100 or more seconds.)*3 f Phone number*4/phone number icon and name in phonebook (if saved in the phonebook)/reason for hiding caller ID g Name (if saved in the phonebook)/Reason for hiding caller ID h Phone number icon in the phonebook (if saved in the phonebook), phone number*4 i Received call number/number of calls*5 40 Voice/Videophone Calls F905i_E2kou F905i.book Page 41 Monday, April 21, 2008 10:53 AM j Image (if saved in the phonebook)*6 *1 This may not appear when, for example, the call reception date/time is not recorded. *2 If a recorded message is deleted, it changes to the icon of missed calls. *3 For an international call, a plus sign "+" appears at the beginning of the phone number. *4 Displayed according to the settings of View preference. n or t • Pressing g on the details screen makes a call in the same way as the call type of the selected redial/ received calls. ❖ Using Redial/Received calls Adding to phonebook : a Place the cursor on a party to add and me2e1 or 2e1 or 2 b Save the name or mail address, etc. Phonebook new entry➝P75, 76 Creating an i-mode mail : Place the cursor on a destination party and a Creating SMS : Place the cursor on the party and a (1 sec. or more). Switching Redial/Received calls : me4 Displaying Sent msg log/Received msg log : p ❖ Switching details screen display On the details screen, me6e1-3 Setting items ➝P79 "Switching details screen display" ❖ When you missed calls (the digit indicates the number of missed calls) appears in the stand-by display. The incoming calls are recorded as missed calls in Received calls. ◆ Deleting redial/received call logs Deleting one entry r (Redial) or l (Received calls)ePlace the cursor on an entry to delete and me31 Deleting selected entries : r (Redial) or l (Received calls)eme32eSelect the entries to deleteep Deleting all entries : r (Redial) or l (Received calls)eme33eAuthenticate "Yes" 186/184 Setting to either Notify/Not notify caller ID for each call • Caller ID is your important information. Carefully consider whether you want to include caller ID information when making a call. Voice/Videophone Calls 41 F905i_E2kou F905i.book Page 42 Monday, April 21, 2008 10:53 AM • The caller ID is displayed only when the phone of the other party is a digital mobile phone, etc. enabled to display the caller ID. • Priority of the method to notify a caller ID➝P41 Notify your caller ID : Enter a phone numberen or Not notify your caller ID : #31#eEnter a phone numberen or t ❖ Sending tone signal (DTMF) during a videophone call • The tone signal can be entered only while sending camera image, while sending Camera-Off image or while Charaden is displayed. The number you pressed is displayed and the tone signal is transmitted. c : Cancel sending • While sending camera image or Camera-Off image, a tone signal can be sent only by pressing the keypad without pressing m0. • A frame set on a camera image or a still image set as a substitute image is canceled. • Because a tone signal is sent using keypads, actions with pressing keypads are disabled while sending Chara-den. Sending tone signal (DTMF) Tone signals (DTMF) can be sent from the terminal to operate the Voice Mail service or use various push-button phone services at your home. By entering pause ("P") or timed pause ("T") when making a voice call, tone signals (DTMF) can be sent with digits in the phone number separated. • Pause and timed pause are enabled only for voice calls. Call option ❖ Entering pause "P" Making a call under set conditions Use for operating the answering system at home, reserving tickets, etc. Tone signals are sent with the phone number separated at the point where pause ("P") is entered. Enter a phone numbere* (1 sec. or more)eEnter digits to senden You can set calling conditions each time you make a voice or videophone call. • Priority of the method to notify a caller ID➝P41 When pressing g after the call is connected, the digits after the pause ("P") are sent. Blinking ❖ Entering timed pause "T" Timed pause ("T") is used to dial outside line number followed by an extension. When timed pause ("T") is entered between the phone and extension numbers, the extension number is dialed with a pause of the predetermined seconds after the phone number is dialed. Enter a phone numbere# (1 sec. or more)eEnter an extension numberen • Timed pauses ("T") can be entered in succession. • Each timed pause ("T") is followed by an interval of approximately 1 second. 42 Voice/Videophone Calls Enter a phone numbereme2eSet the required items Call type : Select any of "Voice call", "V.phone" or "SMS". Caller ID : Set Notify/Not notify for a caller ID. When "Unspecified" is set, the settings in Caller ID notification are used. Prefix : Select Prefix to be added before phone number. During a call, me0eEnter digit to send A call is made in the specified settings. • If "V.phone" is selected for "Call type", Chara-den to display during a call can be set by pressing t. F905i_E2kou F905i.book Page 43 Monday, April 21, 2008 10:53 AM • Voice calls can be answered also by pressing g or Sub address a keypad (Any key answer). Making a call specifying a sub address Receiving videophone calls : n or t Your own image is displayed while the videophone call is connected. You can set if you call a specific phone or communication device by specifying a sub address. • A sub address is a number used to call a specific device out of multiple telephone sets and/or communication devices assigned the same phone number (e.g. when multiple devices with sub addresses are connected to an ISDN line). It is also used to select contents in a movie delivery service "V live". me[Settings & NW services]e563e1 or 2 • Any key answer is unavailable. • A switching confirmation screen to speaker appears ❖ Making a call specifying a sub address during Silent mode. Enter a phone numbere*eEnter a sub addressen or t • You can answer a videophone call using a substitute image set in Image setting (Videophone image) by pressing a instead of n or t. The substitute image is sent to the other party when the videophone call is connected. Noise reduction Suppressing ambient noise to improve call quality By setting the noise canceller function that suppresses the ambient noise, your voice and the other party's voice can be made clearer. • It is recommended that this function be used set to "ON" normally. me[Settings & NW services]e571e1 or 2 Receiving voice/videophone calls When ending the call, f. ◆ Operations from submenu during receiving call When there is an incoming voice or videophone call, the operations listed below can be performed from submenu. When Arrival call act is "Answer", the same operations are enabled also when there is another incoming voice call during a voice session. Submenu item a Call Rejection Receiving voice/videophone calls A call is received. j : Ring alert volume Side key [▲] : Stop the ring tone and the vibrator operation When the other party does not notify caller ID Reason for hiding caller ID is displayed. User unset : When the caller selected not to send caller ID Payphone : When the call was made from a payphone, etc. Unavailable : The call was made under the situation that does not allow sending the caller ID; e.g. a call from overseas or a general subscriber phone via forwarding services (caller ID may be sent by connecting phone companies). Operation Disconnect without receiving a call ◆ When you hear beeps (call waiting ring tone) while talking over a voice call If you are a subscriber to Voice Mail service, Call waiting or Call forwarding service, you hear beeps (the call waiting ring tone) when receiving another incoming voice call while talking over a voice call. You can perform any of the operations below Service Operation Put current voice call on hold and Catch Phone (Call waiting service) answers second voice call * Selection from the submenu is enabled only when Arrival call act is "Answer". Select call reception type. Receiving a voice call : n Voice/Videophone Calls 43 F905i_E2kou F905i.book Page 44 Monday, April 21, 2008 10:53 AM Any key answer Enabling use of keypad to answer call You can set if you answer a call by pressing 0-9, g, * or # in addition to n. • The any key answer function is effective for a voice call. It is unavailable to an incoming call during talking. me[Settings & NW me[Settings & NW services]e1161eSelect the On-hold tone fielde2 • Press 1 and go to Step 3 to restore preinstalled guidance. services]e53e1 or 2 "Record" in the Edit message fieldeRecord the status message after the beep Recording starts after a message appears. Close settings Ending/putting on hold/continuing a call by folding the terminal • This function does not operate during 64K data communication, packet communication. services]e572e1-3 End the call : Terminate the call. On-hold : Put the call on hold. Continue(mute) : Mute the sound without terminating the call. However, when the speakerphone function is active, your voice is not heard by the other party but you hear the other party's voice from the speaker. When you can/could not answer a voice/videophone call Respond and Hold Putting calls on hold when you cannot answer immediately • The caller is charged for the time spent on hold. While receiving a call, f. The call is put on hold, and the other party hears a status message. For a videophone call, Response hold image for videophone is displayed to you and the other party. When you are ready to answer the call, n. • You can also answer a videophone call by pressing t. A substitute image is sent to the other party by pressing a. • If the caller presses f or hangs up while on hold, the call ends. Status message Setting status message You can record a status message in your own voice. • 1 message approximately 10 seconds long can be recorded. • As default On-hold tone, " 對不起現在不能接電話，請稍後 或稍後在撥。" is saved. 44 An approximate guide of the time for recording me[Settings & NW Voice/Videophone Calls • An end tone (beep) sounds approximately 10 seconds after the start of recording. • Press g to stop recording halfway. • When a recorded status message is deleted, the preinstalled message is reset. • Select "Play" to check the recorded status message. F905i_E2kou F905i.book Page 45 Monday, April 21, 2008 10:53 AM Supplementary description of recording message➝P57 Step 2 in "Setting status message" Answer machine Allowing the caller to record message when you cannot answer call By activating Answer machine, a greeting message is played and the caller can record a message when you cannot answer the call. • You can record up to 4 voice and videophone calls in total, approximately 30 seconds for each call. ◆ Activating Answer machine MENU [Phonebook & Logs] 71 Playing/deleting recorded messages MENU [Phonebook & Logs] 72 ◆ Playing recorded messages Side key [▲] (1 sec. or more)e2 You can set if you activate Answer machine. • Operate the terminal in open state. Side key [▲] (1 sec. or more)e1e1 or appears on the stand-by display when Answer machine is activated. a Status icon : Recorded message of voice call (unplayed) : Recorded message of voice call (played) : Recorded message of videophone call (unplayed) : Recorded message of videophone call (played) b Receiving call in overseas (except GMT+08:00)*1 c Receiving international call d Phone number*2/name (if saved in the phonebook)/reason for hiding caller ID e Date/time of recording (local time when in overseas) and phone number of party*2/reason for hiding caller ID at cursor position *1 This may not appear when, for example, the call reception date/time is not recorded. *2 For an international call, a plus sign "+" appears at the beginning of the phone number. ❖ Responding with Quick answer machine When Answer machine is not active, you can activate it once by pressing and holding side key [▲] for 1 second or more while receiving a call. This operation does not set Answer machine to active. ◆ Setting the response time before the greeting starts MENU [Phonebook & Logs] 713 • The default is "13 seconds". Side key [▲] (1 sec. or more)e13eEnter the response time • Set duration from 0 to 120 seconds. ◆ Setting the greeting message Select a recorded message. MENU [Phonebook & Logs] 714 You can record your own voice as greeting message. • 1 message approximately 10 seconds long can be recorded. • As default Greeting message, " 對不起現在不能接電話， 請廳到P聲響後在30秒鍾内留言。" is saved. Side key [▲] (1 sec. or more)e14eSelect the Greeting message fielde2 • Press 1 to restore preinstalled guidance and go to Step 3. "Record" in the Edit message fieldeRecord the greeting message after the beep An approximate guide of the playing time Playing voice call message Playing videophone call message • During playing, the operations below are available : j/Side keys [▲▼] : Adjust volume g : Stop n : Switch the speakerphone function ON/OFF (only when playing voice call message). Recording starts after a message appears. Voice/Videophone Calls 45 F905i_E2kou F905i.book Page 46 Monday, April 21, 2008 10:53 AM • When videophone call message is being played, the speakerphone function is set to ON. Switching the speakerphone function is not available. • When videophone call message is played in Silent mode, a sound playing confirmation screen appears. Select "No" to play the message without sound. Making a call : Place the cursor on the party and n or t • To make a call specifying conditions, press m3.➝P51 Adding to phonebook : a Place the cursor on the party and me4 or 5e1 or 2 • When adding data to existing phonebook entry, select the phonebook entry to add. b Save the name or mail address, etc. Phonebook new entry➝P75, 76 Select if you delete the recorded message. ◆ Deleting recorded messages Side key [▲] (1 sec. or more)e2ePlace the cursor on the recorded messagesme2e1 or 2e"Yes" Videophone call settings Using Chara-den During a videophone call, a character can be sent instead of camera image. • Displaying Chara-den➝P289 During a call, me421eSelect a foldereSelect a Chara-den Switching your image and substitute image : t • When Chara-den is set as the substitute image, the Chara-den may not be displayed and the Default image may be sent. Switching in-camera/out-camera*1 : a • This item is set to "In-camera" by default. • Even when the camera is switched, settings of Frames, Shooting mode, Brightness/Flicker adjustment, etc. are kept. Turn on/off the light*2 : a (1 sec. or more) If the light is turned on, the light turns on in white. • Rotating the display weakens the effect of the light. • Light may be temporarily turned off by setting operations, etc. during a call. Switching display magnifications of camera image *1 j • Each time you press u, the zoom scale switches in the order below, and each time you press d, it switches in the opposite order. In-camera : Standard ➝ × 2 Out-camera : Standard ➝ 2× ➝ 4× ➝ 6× ➝ 8× ➝10× ➝ 12× ➝ 16× • Switching in-camera and out-camera cancels the zoom. Applying special effects to image *1 me2e1-4 Standard : Standard image Backlight : Shooting subjects against the light Monotone : Shooting in monochrome mode Sepia : Shoot in sepia mode Adjusting brightness of image*1, *3 : me31eAdjust with hep • This item is set to "Level 3" by default. • You can adjust at 5 levels. Adjusting flicker*1, *3 me32e1-3 The flicker may be reduced by selecting the settings that match the power supply frequency of your area. • This item is set to "Auto" by default. • Reflected to the flicker adjustment settings of Camera and Barcode reader. Chara-den • The operations below are available during a videophone call : 1-9, # : Action a : List actions 0 : Stop the action Setting images to send to the other party during a call 46 Perform necessary operation during a call. Voice/Videophone Calls F905i_E2kou F905i.book Page 47 Monday, April 21, 2008 10:53 AM Adding frame on image*1 me41eSelect frame • Only the frames of 176× 144 or smaller can be selected. • While In-camera is used, a mirror image (flip horizontal) is displayed and a normal image (real orientation) is sent to the other party. While Outcamera is used, the image same as on the display is sent to the other party. • Press g to cancel. • If you set "My side" or "Other side", Sub screen cannot be set. Sub screen : Set one of the images ("My side" or "Other side") to appear in the sub screen during a videophone call. Screen size : Set the main screen view size. Visual preference : Set quality of an image to be received from the other party. Display light : Set lighting of the display during videophone calls. • If you set "Terminal settings", it depends on settings of Display light of Display. Speakerphone: Set whether to use the speakerphone function at the same time as the videophone call is connected. Sending Camera-Off images me43 The substitute image set in Substitute image is sent. • When Chara-den is set as the substitute image, the Default image is sent. Sending still image me44eSelect a foldereSelect a still image • Only still images that are 176× 144 or smaller for Image size and permitted to output from the terminal can be set. Images that inhibited to output from the terminal ➝P304 "File restriction" in "List of display items and changeability" • Press g to cancel. Switching to Macro shooting*2 me6 You can adjust the focus when sending images of very close objects approximately 8-10 cm away. • Press m6 to cancel. Setting the quality of sending/receiving images me8e1 or 2e1—3 Normal : Standard quality Prefer motion spd : Motions become smoother in a little lower-definition image. Prefer img qual : Motions become a little slower in a higher-definition image. • You can also press h to switch the Sending image quality . *1 This item can be set only while sending camera image. *2 This item can be set only when using Out-camera. *3 The settings are retained after a call. Image setting Setting substitute and hold images for videophone calls MENU [Settings & NW services] 234 You can change the substitute image to be sent during videophone calls, Answer machine image, Response hold image, On-hold image or Movie memo image. ◆ Setting substitute image You can set the operation to be performed when videophone calls fail to get through and the screen to appear during videophone calls. me[Settings & NW services]e63eSet the required itemsep Auto redial as voice : Set whether to redial a voice call for unsuccessful videophone attempt. Display setting : Set one of the images ("My side" or "Other side") or both of images ("Both sides") to appear while a videophone call. services]e65e1eSelect the Image field Setting standard image : 2 Setting other Chara-den : 3eSelect the List images fieldeSelect a foldereSelect a Charaden Setting other still image : 4eSelect the List images fieldeSelect a foldereSelect a still image Operation Changing videophone settings Setting standard Chara-den me[Settings & NW ◆ Changing image for recording msg/ response hold/On-hold/recording movie memo me[Settings & NW Select the Image fielde1 or 2ep services]e65e2-5 Voice/Videophone Calls 47 F905i_E2kou F905i.book 48 Page 48 Monday, April 21, 2008 Voice/Videophone Calls 10:53 AM F905i_E2kou F905i.book Page 49 Monday, April 21, 2008 10:53 AM Phonebook 49 F905i_E2kou F905i.book Page 50 Monday, April 21, 2008 10:53 AM Phonebook new entry Phonebooks supported by the terminal F905i supports Terminal phonebook and UIM phonebook. You can make voice/videophone call and send mail or SMS from these phonebooks. • Items to be saved in Terminal phonebook and UIM phonebook are as follows : OK: Allowed ✕ : Not allowed Item Number of entries in the phonebook Entry Content Phone book No. SIM card (USIM) phonebook SIM card (SIM) phonebook entries *1 Maximum 200 entries Maximum 140 entries OK ✕ ✕ Terminal phonebook Maximum 1000 16 two-byte (32 5 two-byte (12 one-byte) one-byte) characters characters Zhuyin 16 Zhuyin (32 one-byte) characters 5 Zhuyin (12 one-byte) characters Image, Movie One per person Group "No group" or 30 groups "No group" or 10 groups Phone number Five numbers per One number per person ✕ 5 two-byte (12 one-byte) characters ✕ ✕ ✕ One number per person of 3005 numbers in the entire phonebook *1 Phone number icon Mail address ✕ OK Five addresses per person, maximum ✕ One address per person of 3005 addresses ✕ in the entire phonebook *1 Mail address icon OK ✕ ✕ OK ✕ ✕ Other settings *2 *1 The entries you can actually add may be less depending on the content of each phonebook entry *2 The items you can set are: birthday, note, postal code/address, location information, company name, job title and URL. • Phonebook data saved in your UIM is available even when it is inserted to another terminal. 50 Phonebook You can add phone numbers and mail addresses to the Terminal phonebook. • Priority of the incoming/outgoing operation➝P96 • Maximum number of recorded items➝P74 me[Phonebook & Logs]e2 Enter a name. • Up to 16 two-byte (32 one-byte) characters can be entered. Name person, maximum Adding entries into Terminal phonebook Set the required itemsep F905i_E2kou F905i.book Page 51 Monday, April 21, 2008 10:53 AM Alert by contact Group setting Setting receiving actions for each phonebook entry Making group settings • Priority of incoming operation➝P88, 89, 102 peSearch the phonebookePlace the cursor on a phonebook entry to set and me32eSet the required itemsep Adding groups me[Phonebook & Logs]e12 me2 Deleting a group : Place the cursor on the group and me3eAuthenticatee"Yes" • Even in Privacy mode (when Phonebook & Logs is "Hide set contact"), the phonebook entries with secrecy are deleted. • For No group, only the phonebook entry in the group is deleted. h : Switching Call and Mail screens. Changing a group name : Place the cursor on the group and me4 • For UIM phonebook, press p, place the cursor on the group and pressm2. Changing the order of the groups : Place the cursor on the group and me6 or 7 Phone alert settings screen Phonebook(UIM) new entry Enter the group nameep Adding to SIM card phonebook • Maximum number of recorded items➝P74 me[Phonebook & Logs]e3 Enter a name. • Up to 5 two-byte (12 one-byte) characters can be entered. Set the required itemsep Phonebook 51 F905i_E2kou F905i.book Page 52 Monday, April 21, 2008 10:53 AM ❖ Using phonebook entries Phonebook search Making calls using phonebook • In Privacy mode (when Phonebook & Logs is "Hide set contact"), the phonebook entries or groups with secrecy cannot be searched. The same applies to Quick dial, Quick mail, Headset quick-dial and Search message. peSearch the phonebook Creating SMS : Place the cursor on the party and a(1 sec. or more) • When only the phone number is saved in the phonebook entry of selected person, pressing a can also create SMS. • When operating from the details screen, display a phone number and press a. Creating and sending SMS ➝P205 Displaying sites : Place the cursor on the party and me15e"Yes" • Press t on the site connection confirmation screen to display using Full Browser. Phonebook list (Show all names) a Icon set for first entry b Number of phone numbers and mail addresses saved in entry at the cursor position c The first phone number of the party at the cursor position For example, if... Name) Fujitsu Zhuyin)ㄈㄨㄕㄊㄨㄥ Then it will be allocated to the "ㄅ" tab. Creating an i-mode mail : Place the cursor on the party to send a mail to and a • When operating from the details screen, display a mail address and press a or g. Creating and sending i-mode mail➝P170 Place the cursor on the party and n or t Attaching phonebook data to mail : Place the cursor on the party and me13 Creating and sending i-mode mail➝P170 Searching a received mail : Place the cursor on the party and me16e1 or 2 • For UIM phonebook, place the cursor on the party and press m15, and press 1 or 2. ◆ Searching by specifying the search method • In search method available for UIM phonebook, pressing p on a phonebook list switches the Terminal phonebook list and UIM phonebook list. • is displayed on the left of each entry name in the UIM phonebook list. • When a phonebook list extends to multiple pages, you can switch pages using side keys [▲▼]. In a search method except Show all names, h may also be used to switch pages. me[Phonebook & Logs]e1 Specify the search method. Showing all names (Chinese syllabary) : 1eSelect the line to display by h • It will be displayed in the order of Zhuyin (ㄅ ➝ ㄉ ➝ ... ➝ ㄧ) Others (alphabets, numbers, Zhuyin beginning with a blank, symbols and no Zhuyin). • Each time you enter one Zhuyin character, an address that has the closest Zhuyin will be searched for in the address book. 52 Phonebook F905i_E2kou L06.fm Page 53 Monday, April 21, 2008 11:16 AM Searching by group : 2eSelect a group • The entries in the specified group are displayed in the order of the reading below : Japanese syllabary order➝Alphabetical order➝Number ➝Entries starting with blanks➝Symbol➝No reading • If one of the keypads of 0-9, #, * is pressed, the line to which the keypad is assigned is displayed. ◆ Checking phonebook details peSearch the phonebookeSelect a phonebook entry de Searching by group : 2eSelect a group • The address book data within the same group will be displayed in the following Zhuyin order. • The Zhuyin order ➝ Alphabetical order➝ Number➝Beginning with a blank➝Symbols➝ No Zhuyin Searching by frequency* : 3e1or2 Displayed in the order of number of calls or number of mails. • The total numbers of calls and mails are counted up to 9,999. • PushTalk communications are not counted. • When resetting total number of calls/mails, place the cursor on the party, press m93 and select "Yes". Searching by phonebook number* : 4eEnter phonebook numberep • Zeroes before single- or double-digit phonebook numbers can be omitted. • You can display the phonebook list in phonebook No. order by pressing p with no input. Searching by phone number : 5eEnter part of a phone numberep Search the phone numbers containing the entered numbers, and phonebook data list of the Terminal phonebook is displayed in the order of he phonebook number, and the phonebook data list of the UIM phonebook is displayed in the order of reading. • You can display the phonebook data list in the order of phonebook No. or reading by pressing p with no input. FOMA terminal phonebook details screen (Phone number) a Phonebook No. b Name and reading c Group icon, Group name d Icons set in Ph.book 2in1 setting (with 2in1 ON in Dual mode) : : Phonebook entries in A mode : Phonebook entries in B mode : Phonebook entries in both A and B modes e Set any of Accept/Reject call, Caller ID settings or secret code f Icons indicating settings such as ring alert (call/ mail)*1 / : Ring alert / : Vibrate alert / : Ring alert and Vibrate alert / : Light alert / : Light color / : Light alert and Light color : Substitute image (call only) g Image*2 h Saved icon, Icon type Searching by secret attribute* : 6 The phonebook entries with secrecy appears in the order of phonebook No. * This search method is unavailable for UIM phonebook. ◆ Setting preferred search method Set the search method displayed when pressing p on the stand-by display. me[Phonebook & Logs]e1ePlace the cursor on the search method and m • Check mark appears after the specified search method. Phonebook 53 F905i_E2kou F905i.book Page 54 Monday, April 21, 2008 10:53 AM i Saved items *1 Settings from Alert by contact are indicated with colored icons. *2 The display follows the settings of View preference. j : Display details screen of the previous/next phonebook entry. h : Display the other items set. • Even when multiple phone numbers and/or mail addresses are saved, the items can be displayed by pressing h. Viewing history information : On the phone number or mail address detail screen, p. The cumulative number and the date and time of last call appear. • If you press p on the history information screen, cumulation of calls and mails can be reset collectively. Viewing User information : me81 The image, phonebook No. (Terminal phonebook only), name, readings, group name, first phone number (with icon type) and first mail address (with icon type) registered in the phonebook appear. The name and readings fully appear without cutting down. Edit phonebook Editing phonebook entries ◆ Editing saved data peSearch the phonebookePlace the cursor on a phonebook entry and me31 Edit the phonebook entry. ◆ Copying saved data Copied item can be pasted into screen input areas such as in the mail creation screen or the phonebook data entry screen. • Copied items are recorded until the power is turned OFF, and they can be pasted any number of times. peSearch the phonebookePlace the cursor on a phonebook entry to copy and me6e1-8 The data of appropriate items is recorded temporarily. • When operating from the UIM phonebook, press m6 and 1-3. • The first saved phone number and mail address are copied. 54 Phonebook • To copy the second or subsequent phone number or mail address, display the phone number or mail address to be copied on the details screen, press m6 and press 2 or 3. Display the character entry screen to pasteePaste the characters Pasting characters➝P367 F905i_E2kou F905i.book Page 55 Monday, April 21, 2008 10:53 AM Copying phonebook entries Entries in Terminal phonebook are copied to UIM phonebook and from UIM phonebook to Terminal phonebook. • The Terminal phonebook also can be copied into microSD memory card.➝P294 • If the entries of the phonebook contain the same group name as that in a copy destination phonebook, the data is copied to that group. • The phonebook data item to be copied and the contents are as follows : Terminal phonebook➝SIM card phonebook Item Deleting a phonebook entry in the Terminal phonebook peSearch the phonebook Place the cursor on a phonebook entry and me4e1 or 2e"Yes" • When "All contacts" is selected, perform authentication. Deleting from UIM phonebook : Place the cursor on a party and me4e"Yes" Setting functions for phonebook entries SIM card phonebook➝Terminal phonebook ◆ Setting Show/Hide caller ID to each phone number Name 5 two-byte (12 one-byte) The entry content is characters or less. copied as it is Zhuyin 5 Zhuyin (12 one-byte) characters or less. Phone number The first phonebook entry The icon is set as All (26 digits or less). If the timer ("T") is registered only the timer ("T") is deleted. The icon will be replaced with All Mail The first mail address (38 The icon is set as All address one-byte characters or less). The icon will be replaced with All The entry content is copied as it is • This item is set to "No setting" by default. • Priority of the method to notify a caller ID➝P41 peSearch the phonebookePlace the cursor on a phonebook entry and me342eAuthenticateeSelect a phone numbere1-3 • If the number of characters exceeds the limit that can be saved in UIM phonebook, the exceeding part is deleted. ◆ Copying data between Terminal phonebook and UIM phonebook Copying from Terminal phonebook to UIM phonebook peSearch the phonebookeme71eSelect a phonebook entryep • When copying from the UIM phonebook to Terminal phonebook, press m7 to select a phonebook entry, and press p. Delete phonebook Deleting phonebook entries • When deleting all, all of the created groups are deleted. • The identical phonebook entries in PushTalk phonebook are also deleted. • All entries in the UIM phonebook cannot be deleted at a time. Phonebook 55 F905i_E2kou F905i.book Page 56 Monday, April 21, 2008 10:53 AM ◆ Setting secret code to mail address ◆ Setting secret attribute for phonebook entries When the other party saves a secret code for its mail address (mobile phone number@imode.net.tw) and you set that secret code for the mail address in your phonebook, the secret code is automatically added to i-mode mail created by searching the phonebook for that phone number. peSearch the phonebookePlace the cursor on a phonebook entry and me341 Blinking peSearch the phonebookePlace the cursor on a phonebook entryme344eAuthenticateeSe lect the mail address • Enter the secret code of 4 digits. flashes when the secret attribute is set for the entry at the cursor position. Canceling : peSearch the phonebookePlace the cursor on a phonebook entry and me341 Canceling : Delete the secret codeeg Secret attribute Making phonebook entries secret You can set secrecy to phonebook entries or groups. In Privacy mode (when Phonebook & Logs is "Hide set contact"), the phonebook entries or groups with secrecy are not displayed. • These functions cannot be set for phonebook entries or groups in UIM phonebook. • If you change secrecy, a confirmation screen appears for performing Apply secret attribute when you end the phonebook and return to the stand-by display. • Setting Privacy mode➝P114 ✔INFORMATION • When operating from the Terminal phonebook details screen, press m and select "Edit/Settings"➝"Advanced settings"➝"Secrecy ON". ◆ Setting secret attribute for group • Secret attribute is not set for phonebook entries in a group with secret attribute. However, they function similarly to those with secret attribute. • Secret attribute cannot be set for (No group). me[Phonebook & Logs]e12ePlace the cursor on the group and me8 • When secret attribute is set for the group at the cursor position, blinks. Canceling : me[Phonebook & Logs]e12ePlace the cursor on the group and me8 Quick dial Using simple dial to make calls You can make calls by a simple operation to parties with phonebook numbers 0-99 in the terminal's Phonebook. • When there are multiple phone numbers saved in a phonebook entry, a call is made to the first phone number. 56 Phonebook Making a voice call to the phone number registered in phonebook number 2 Enter a phonebook number (2)en or F905i_E2kou F905i.book Page 57 Monday, April 21, 2008 10:53 AM Phonebook 57 F905i_E2kou F905i.book 58 Phonebook Page 58 Monday, April 21, 2008 10:53 AM F905i_E2kou F905i.book Page 59 Monday, April 21, 2008 10:53 AM Phonebook 59 F905i_E2kou F905i.book Page 60 Monday, April 21, 2008 10:53 AM F905i_E2kou F905i.book Page 61 Monday, April 21, 2008 10:53 AM Sound/Screen/Light Settings 61 F905i_E2kou F905i.book Page 62 Monday, April 21, 2008 10:53 AM • When music in microSD memory card is selected, a Setting operations for incoming calls and mail/messages • This setting is reflected to Call ring alert, Mail/Msg ring alert, Incoming call/Videophone receiving of Call image, Vibrate alert/effect or Light alert. ◆ Changing operations for incoming call Setting operations for incoming calls me[Settings & NW services]e512eSet the required itemsep Changing operations for incoming videophone calls : me[Settings & NW services]e612eSet the required itemsep ◆ Changing operations for incoming mail MENU [Mail] 011 ae*1eSet the required itemsep Sounds settings Call ring alert/Mail ring alert Changing ring alert for calls and mails, etc. • When a movie/i-motion is set as a ring tone, a movie and/ or sound is played for incoming phone call or mail (Movie ringtone). • This setting is reflected to ring alert in Call alert, Videophone alert, Mail alert, and Chat mail alert. Setting ring alert for incoming mail me[Settings & NW services]e11 Set the required itemsep Setting ring alert for incoming voice/videophone call : 1e1-3 ❖ Setting Music Music (Full Track Music) can be set as a ring alert in two ways : "Full song ring tone" for setting whole music and "Point ring tone" for setting a section previously selected. 62 Setting Full song ring tone Select "Music" at each settingeSelect a folder Select a music to set. Sound/Screen/Light Settings confirmation screen appears. Select "Yes" to move the music to the terminal and set to a ring alert. Setting Point ring tone : Place the cursor on the data to set and aeSelect the item • When Full Track Music in microSD memory card available to nonmember is selected, a confirmation screen for cutting out the portion to set as the ring alert and saving it in the i-motion folder appears. Select "Yes", enter a display name and press p. The cut out music is saved to "i-mode" folder of imotion as i-motion compatible with contents transfer. When the maximum number of saved items/area is reached➝P306 F905i_E2kou F905i.book Page 63 Monday, April 21, 2008 10:53 AM ❖ Ring alert priority When setting ring alerts for multiple functions, they sound in order of the priority below. a Alert by contact of the Terminal phonebook b Alert/image by group of the Terminal phonebook c Call ring alert/V.phone ring alert/Mail ring alert/Call alert (Incoming call)/Videophone alert (Videophone receiving)/ Mail alert • When the other party does not notify the caller ID, the ring alert for voice call depends on Anonymous caller. A ring alert for videophone call depends on the settings of V.phone ring alert/Videophone alert. • When the sound or image data used in Anonymous caller is deleted, the settings are changed. The sound actually heard or the image actually displayed may differ from the settings. • When movie/i-motion containing sound and image is set in "Movie ringtone" for ring alert, ring alert and incoming image set for "Movie ringtone" have precedence over images or movie/i-motion set in phonebook. When setting "Movie ringtone" of ring alert for music or movie/i-motion containing only sound (i-motion without image such as the one containing only voice of a singer), ring alert becomes "Music" or "Movie ringtone", and receiving call image becomes phonebook image. Alarm sound Setting alarm sound for Alarm clock and Schedule reminder Setting Alarm clock sound me[Settings & NW 1eSelect the Alarm clock fielde1- services]e113 Setting Music➝P87 Setting sound for Schedule reminder : 2eSelect the Alarm on time field or Alarm in advance fielde1-3 Adjust volume Setting volume of various sounds such as ring alert and alarm sound me[Settings & NW services]e12e1-7 • When Alarm volume is selected, select 1 or Stereo sound effect Setting Stereo/3D sound or Surround • This setting is also reflected to Surround of Settings for movie/i-motion and Music player, and Stereo/3D sound of Settings for Melody. me[Settings & NW services]e16e1-3e1 or ✔INFORMATION • The 3D sound function creates sound that is 3-dimensional or • moves around in space, using stereo speakers (or stereo earphone set). Using the 3D sound function, very realistic iαppli games and ring alerts and i-motion can be enjoyed. The most realistic 3D sound can be enjoyed when the terminal is held in front of the listener's face 20-30 cm away (varying between individuals). 3D sound becomes less realistic when the terminal is positioned off the center rightward or leftward or at a distance more or less than 20-30 cm from the face. There are differences in how the 3D sound effect is felt among individuals. 2. Side keys[▲▼] or keg Vibrate alert/effect Using vibrator to signal incoming calls and alarms • The operation of Vibrator for receiving 64K data communication depends on the setting of incoming voice call. • This setting is also reflected to settings for Vibrate alert or Vibrate effect in Call alert, Videophone alert, Mail alert, Chat mail alert and i-αppli settings. • If the terminal is on the desk, etc. when the vibrator operates, it may fall off because of the vibration. When setting the vibrator for incoming voice, videophone and PushTalk calls me[Settings & NW services]e13 1e1-2 Setting the vibrator for incoming mail: 2 Setting the vibrator used together with Alarm clock or Schedule reminder sounding : 3e1 or Setting the vibrator used for i-αppli : Press 4. 1-5 Sound/Screen/Light Settings 63 F905i_E2kou F905i.book Page 64 Monday, April 21, 2008 10:53 AM ❖ Vibrate alert priority When setting Vibrator in multiple functions, it operates in order of the priority below. a Alert by contact of the Terminal phonebook b Alert/image by group of the Terminal phonebook c Vibrate alert/effect/Call alert/Videophone alert/Mail alert me[Settings & NW services]e1163e1-3 ✔INFORMATION • To make settings during a voice call, press m and select "Quality alarm". Operation sound Setting operation sound You can change the sound to be emitted when a key is pressed (except side keys [▲▼], M or P) or the terminal is opened or folded. Emission of the sound can also be inhibited. Reconnect alarm Setting alarm for reconnecting interrupted call me[Settings& NW services]e1164e1-3 me[Settings & NW services]e1141e1-4 Low Battery alert Setting Low Battery alert Display turn sound Setting sound to be emitted when turning display me[Settings & NW services]e1142eSelect the Turn sound fielde1 or 2 Shutter sound/Movie camera sound Setting shutter sound me[Settings & NW services]e114e3 or 4e1-5 Charge alert Setting alert sound for charging me[Settings & NW services]e115e1 or 2 On-hold tone Setting on-hold tone me[Settings & NW services]e1162e1-3 Quality alarm Alarm announcing that call is about to be interrupted • If the signal quality deteriorates rapidly, the call may be disconnected without sounding the alarm. 64 Sound/Screen/Light Settings You can set if you activate the alert when the battery is low. me[Settings & NW services]e1165e1 or 2 Silent mode Making the terminal silent Sounds from the terminal can be disabled in order to prevent disturbance to the people around you by enabling the vibrator for incoming calls or muting the keypad sound. F905i_E2kou F905i.book Page 65 Monday, April 21, 2008 10:53 AM ◆ Starting Silent mode # (1 sec. or more) After Silent mode specified in Silent mode is activated, (in General silent mode) or (in Personalized silent mode) is displayed on the stand-by display. • By default, you can also start/cancel Silent mode by pressing and holding Side key [▲] for 1 second or more with the terminal folded. When Silent mode starts, the light goes lit once in red and the vibrator operates once. When Silent mode is canceled, the light flashes twice in blue and the vibrator operates twice. • When the terminal is folded, Silent mode can be activated/deactivated from a menu on the subdisplay.➝P33 Canceling : # (1 sec. or more) ✔INFORMATION • Shutter sound is emitted even in Silent mode. ◆ Setting Personalized Silent mode me[Settings & NW services]e14 Set the required itemsep Setting General silent mode : 1 Displays/Lights settings Timed theme Changing stand-by display, Silent mode, etc. according to lifestyles ❖ When General silent mode is activated An incoming call is notified with vibration, muting all sounds to be emitted from the terminal such as ring tone, keypad sound, terminal open/close sound, Display turn sound or Alarm. Microphone is sensitized so that a call can be made in a small voice. • In the cases below, the operation of vibrate alert is "Pattern A". - When receiving voice call, videophone call, mail or 64K data communication - When the time specified in Countdown timer elapses - When the date and time specified in schedule comes • When the time specified in Alarm clock comes, vibrate operates according to the setting of Alarm clock. • Melody is not played automatically even when sent/ received mail is displayed with "Auto play" set for Attachment auto-play. • When playing a movie/i-motion with sound in Silent mode, the sound playing confirmation screen appears. Select "Yes" to play the sound and image. When "No" is selected for a movie/ i-motion with image, only image is played. • When playing Music or Melody in Silent mode, the playing confirmation screen appears. Select "Yes" to play. MENU [Settings & NW services] 726 This function allows you to change the stand-by display or activate Silent or Privacy mode at the specified time. You can select the alarm to sound once only, repeat everyday or sound on the same day every week. • Up to 18 codes can be registered. me[Settings & NW services]e33eSelect the title is displayed at the left of the title for Timed theme set to ON. Setting/canceling the timed theme : Place the cursor on the title and m Set the required itemsep Stand-by display Changing stand-by display An image, movie/i-motion, Chara-den or i-αppli can be set on the stand-by display or images in a folder can be set to appear at random on the stand-by display. The screen can be customized to display the newly arrived information, calendar, schedule, etc. Displaying clock (➝P104), battery and signal level icon (➝P101) can also be set. • Stand-by display for some of images, movies/i-motion, Chara-den or i-αppli are disabled if you do not insert the same UIM as used in downloading the data (UIM operation restriction). • If a data in "Preinstalled" folder is set, the set stand-by display is displayed even in Personal data lock. ◆ Setting image/movie/i-motion/Chara-den as stand-by display Image, movie/i-motion or Chara-den downloaded from an imode site or still image or movie shot with the terminal can be Sound/Screen/Light Settings 65
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2009:01:20 13:24:44+09:00 Modify Date : 2009:01:20 13:27:29+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2009:01:20 13:27:29+09:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : F905i.book Creator : Administrator Document ID : uuid:0a0bcc8c-d482-499c-af8a-048f09ec541b Instance ID : uuid:667494b2-0ed1-45dc-8af6-115f53390c7a Producer : Acrobat Distiller 7.0 (Windows) Page Count : 33EXIF Metadata provided by EXIF.tools