Fujitsu OS-F905I Cellular Phone User Manual F905i

Download:
Mirror Download [FCC.gov]
Document ID	1061500
Application ID	s1odnN1/fqt+/ie103rlYw==
Document Description	Manual Part 1 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	323.15kB (4039421 bits)
Date Submitted	2009-01-26 00:00:00
Date Available	2009-01-26 00:00:00
Creation Date	2009-01-20 13:23:01
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-01-20 13:24:56
Document Title	F905i.book
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

F905i_E2kou
F905i.book
Page 66
Monday, April 21, 2008
10:53 AM
set as the stand-by display. GIF Animation, created animation
or Flash graphics can also be set.
• Still image, GIF animation, created animation or Flash
graphics can be set on a Horizontal position.
me[Settings & NW
Select any of 1, 3, 4, 6
• Images and movies/i-motion saved in microSD
memory card cannot be selected. Select them after
moving/copying to the terminal.
services]e211
Setting action of Chara-den : Place the cursor on the
Chara-den to set and meOn the Stand-by
settings screen, set the required itemsep
Setting items➝P289 Step a in "Setting to the stand-by
display"
Setting horizontal display stand-by display : 2
Selecting horizontal display : 1 or 2
Select a foldereSelect an image, movie/imotion or Chara-den
"Yes"
• When setting movie/i-motion as the stand-by display,
the first image is displayed.
• If the selected image, movie/i-motion or Chara-den
can be zoomed, a confirmation screen appears
asking if you display at the same magnification or
zoom. Select "Yes (Same size)" to maintain the
image size or select "Yes (Large size)" to enlarge the
image to the screen size to display on the stand-by
display.
• If i-αppli stand-by display has been set, a
confirmation screen appears asking if you terminate
the i-αppli stand-by display. When selecting "Yes",
the i-αppli stand-by display is terminated.
• When the movie/i-motion or Chara-den is canceled
with no i-αppli stand-by display set, Show ticker of iChannel ticker is set to "Yes".
❖ To play movie/i-motion, animation or Charaden set as the stand-by display
• The operations below are available for movie/i-motion :
f/Opening the terminal : Play
c/f : Stop
Side keys [▲▼] : Adjust volume
• The operations below are available for GIF animation,
created animation or Flash graphic :
Opening the terminal/Turning the display/Returning to the
stand-by display/Turning power on : Play
f : Pause/Play
• The following operations are available for Chara-den :
c/Opening the terminal : Play
c/f : Stop
◆ Displaying images at random 
You can display multiple still images saved in folders in My
Picture on the stand-by display (Vertical display) switching at
random at the specified timings.
• Only JPEG/GIF format images (except for GIF animation)
can be displayed.
me[Settings & NW
services]e21112eSet the
required items
Folder : Select the folder containing the images.
66
Sound/Screen/Light Settings
F905i_E2kou
F905i.book
Page 67
Monday, April 21, 2008
10:53 AM
Change image : Set the timing for changing images.
◆ Setting i-αppli stand-by display
pe"Yes"
• Only i-αppli compatible with the i-αppli stand-by display can
be set.
• The i-αppli stand-by display takes precedence over other
stand-by display settings.
• Canceling operation, setting and stand-by display of iαppli➝P223
me[Settings & NW
services]e21115
A list of i-αppli compatible with the i-αppli stand-by
display appears.
Select i-αppli e "Yes"
or
is displayed when the i-αppli stand-by display
is set.
• With no movie/i-motion or Chara-den set on the
stand-by display, if i-αppli stand-by display is
canceled, Show ticker of i-Channel ticker is set to
"Yes".
◆ Customizing stand-by display 
You can divide the stand-by display to several and make
settings to display newly arrived information such as unread
mail or missed call, schedule, calendar, list of notes or
contents of a note in individual areas.
me[Settings & NW
h to switch patternseSelect an areae1-
services]e215
Canceling : 2
• Press m and select "Yes" to cancel all area
settings.
Setting newly arrived information : 2eSelect
informationep
• "When selecting " Unread messages", reception
date/time and titles of unread mails appear.
• When selecting " Missed call", reception date/time
and the phone number of the caller (or name if saved
in phonebook) appear.
Sound/Screen/Light Settings
67
F905i_E2kou
F905i.book
Page 68
Monday, April 21, 2008
10:53 AM
• When selecting "
Recorded messages", recording
date/time and the phone number of the caller (or
name if saved in phonebook) appear.
•
Setting Calendar : 4e1-4
• The number of months that calendar can be
displayed varies by the area size.
•
•
Setting Note content : 6eSelect a note
•
pe"Yes"
❖ Checking information on the stand-by display
Move the cursor with k and eg
❖ Incoming call image priority
Call image
Changing images for outgoing voice/
videophone calls
MENU [Settings & NW services] 511
MENU [Settings & NW services] 611

For voice call
me[Settings & NW
services]e2321eSelect the
Display image fielde1-3
Changing image displayed while making a
videophone call : me[Settings & NW
services]e2323eSelect the
Display image fielde1-3
❖ Outgoing call image priority
When setting outgoing images in multiple functions, they are
displayed in order of the priority below.
a Image saved in the terminal phonebook*
b Alert/image by group of the terminal phonebook
c Outgoing call/Videophone dialing (V.phone dialing img.)
* When Contact image is set to "ON", it is effective.
Call image
Changing images for incoming voice/
videophone calls
• This setting is also reflected to Call alert of Call & Answer
or Videophone alert of Videophone.

For voice call
me[Settings & NW
services]e2322eSelect the
Show image fielde1-5
Changing image displayed while receiving a
videophone call : me[Settings & NW
68
services]e2324eSelect the
Show image fielde1-5
When "Standard image" is set, the image set by
default appears.
When "Select image" is selected, select the Image list
field and select an image.
When "i-motion" is selected, select a movie/i-motion
from the movie list.
When movie/i-motion containing sound and images is
set for Call ring alert or V.phone ring alert, "Sync ring
alert" is set.
Sound/Screen/Light Settings
When setting incoming images in multiple functions, they are
displayed in order of the priority below.
d Image saved in the Terminal phonebook*1
e Alert/image by group of the Terminal phonebook
f Call ring alert*2/V.phone ring alert*2/Call alert (Incoming
call)/Videophone alert (Videophone receiving)
*1 When Contact image is set to "ON", it is effective.
*2 When movie/i-motion containing sound and image is set
in "Movie ringtone", it is effective. When movie/i-motion
containing sound and image has been set in "Movie ringtone" for ring alert, ring alert and Show image set for
"Movie ringtone" have precedence over images or movie/
i-motion set in phonebook.
• When the other party does not notify the caller ID, the
incoming image for voice call depends on Anonymous
caller. An incoming image for videophone call depends on
the settings of Videophone alert.
• When the sound or image data used in Anonymous caller
is deleted, the settings are automatically modified. The
sound actually heard or the image actually displayed may
differ from the settings.
Contact image
Setting Contact image display from
Phonebook at incoming/outgoing call
You can set if you display the image saved in the Terminal
phonebook for incoming/outgoing voice calls/
videophone calls.
• The image saved in Phonebook is displayed when the
recorded person calls with the caller ID.
me[Settings & NW
services]e2325e1 or 2
F905i_E2kou
F905i.book
Page 69
Monday, April 21, 2008
10:53 AM
Setting lighting time for AC adapter connected, imode session, Camera session, Movie camera
session, i-motion or i-αppli : 2-7e1
or 2
Sent/received/retrieving mail image
Changing displays for incoming/outgoing messages and retrieving
You can set images to appear when sending mails,
receiving mails or received mails, or checking new
messages.
me[Settings & NW
Select the Display image fielde1-3
services]e233e1-4
• When "Default" is selected, the image set by default
appears.
• When "Select image" is selected, select the List
images field and select an image.
Setting Image message alert : Select the Display
image fielde1-5
◆ Setting lighting range 
me[Settings & NW
services]e242e1 or 2
◆ Setting brightness of light 
me[Settings & NW
services]e243e1-6
Color scheme
Changing display colors
me[Settings & NW
services]e231eSelect the color
scheme
Sub-display
Setting sub-display
Select startup menu
Changing startup menu
◆ Setting an image to display on sub-display

me[Settings & NW
services]e282eSet the required
itemsep
◆ Displaying phone number or mail address
when receiving an incoming call or mail

me[Settings & NW
services]e281e1 or 2
Show callers' info : The display depends on Receive
display option.
Hide callers' info : Only the status of incoming/
receiving is displayed.
Display light
Setting display and key light
◆ Setting lighting time 
The lighting time of display can be set. When the light is ON,
the display becomes brighter and key area is lit.

Setting lighting time for Normal use
me[Settings & NW
1e1-7
services]e241
Set the menu displayed when pressing m on the standby display.
me[Settings & NW
services]e221e1-3
Using Kisekae Tool
MENU [Settings & NW services] 31
Use of Kisekae Tool allows to collectively set stand-by
display image, menu icons, incoming/outgoing call
images, ring alerts, etc.
• Using Kisekae Tool, the items below can be set (settable
combinations of items vary by Kisekae Tool).
- Stand-by display, stand-by display (Horizontal), Kisekae
menu*1, Basic menu, Basic menu (Background), Battery icon,
Antenna icon, Outgoing call image, Call alert image,
Videophone call image, Videophone alert image, Outgoing
message image, Mail alert image, Image message alert,
Message retrieving, Call ring alert, Videophone ring alert, Mail
ring alert, Alarm clock sound, Screen theme*2, Clock format*3,
sub-display*4
*1 There are such cases that operation when pressing
d or a on the stand-by display may cause different
actions to occur from ordinary ones to be performed or
short-cut operations may be disabled.
*2 Set color theme (Color scheme), font and brightness.
*3 Set Style, Time format, Day and Layout.
*4 Set Clock style, Alert image and incoming mail img.
• Depending on the type of Kisekae menu, the menu
structure of the first layer may change according to usage
Sound/Screen/Light Settings
69
F905i_E2kou
F905i.book
Page 70
Monday, April 21, 2008
10:53 AM
frequency. Also, the number assigned to menu item (item
number) may not be applicable to some menu items. In
such a case, as operations cannot be performed as
described in this manual, switch to the basic menu (➝P31)
or reset (➝P100) the menu operation log.
pe"Yes"
Displaying/changing detail information :
me2e1 or 2
Detail information➝P304
Canceling the setting : me3e1-3
◆ Changing Kisekae Tool
Moving/restoring datame4e1 or 2
Moving/restoring➝P302, 303
me[Data BOX]e5
Deleting data : me5e1-3
Deleting➝P305
Select a folderePlace the cursor on Kisekae
Tool
Resetting the settings :
me6eAuthenticatee"Reset all" or
"Reset menu"
Setting list screen operations : Select a
foldereme5e1 or 2
Checking memory : me4ePlace the cursor
on a data type
• t : Change unit
Sorting data : me6eSet the required
itemsep
Sorting➝P306
❖ Setting to Special mode
If you set to Special mode, "Honey" is added to "Preinstalled"
folder, and automatically set to Kisekae Tool.
mepeme13eEnter "Honey"
in Group name fieldep
• The items below are set.
- Stand-by display, Stand-by(Horizontal), Kisekae
menu, Battery icon, Antenna icon, screen theme,
Clock display
• If you perform the same operations as the setting
procedure, "Honey" is deleted from "Preinstalled"
folder, and the set items are restored to the default
settings.
Customizing the menu
The menu items of Kisekae menu can be changed by
yourself, or icons of Basic menu can be changed.
• Items that can be changed or replaced vary by the set
contents.
• Only when using a Kisekae Tool compatible with changing
or replacing of the menu items, or when setting "Honey" of
Special mode (➝P99), the menu items of Kisekae menu
can be customized.
◆ Customizing the menu items of Kisekae
menu
❖ Changing menu items
mePlace the cursor on the menu
itemme2eSelect a function to save
• You can select till second level.
❖ Switching menu items
70
Sound/Screen/Light Settings
mePlace the cursor on the menu
itemme3eSelect the menu item to be
switched to
F905i_E2kou
F905i.book
Page 71
Monday, April 21, 2008
10:53 AM
❖ Resetting the operation logs of the menu
me[Settings & NW
services]e2231e"Yes"
◆ Changing the icons and Background of
Basic menu
met
• When the display menu is Basic menu, you do not
need to press t.
Displays/Lights settings
Style theme
Customizing the terminal screen
You can make 3 types of original coordinates by
changing the screen designs such as stand-by display,
menu, Clock, battery icon, antenna icon or Sub-display
pattern.
me[Settings & NW services]e32
Select any of 1-3eSet the required
itemsep
me2
Select a functioneSelect a folder eSelect an
image
Menu icons of other functions can be set successively in
the same way.
Canceling an item : Place the cursor on an icon and
me1e"Yes"
Battery icon/Signal level icon
Changing battery/signal level icon
me[Settings & NW
services]e21e3 or 4e16
Canceling all items : me2e"Yes"
aeSelect a foldereSelect an image
Background is set.
Canceling a background : me4e"Yes"
pe"Yes"
• When the display menu is Basic menu, the
confirmation screen of changing to the Basic menu
does not appear.
◆ Reset to default menu items and icons
• Shortcut menu is also reset to default state.
me[Settings & NW
services]e2232e
Authenticatee"Yes"
Sound/Screen/Light Settings
71
F905i_E2kou
F905i.book
Page 72
Monday, April 21, 2008
10:53 AM
Indicator light
Indicating newly arrived information
such as missed calls and unread
mails with lighting
You can set if you indicate unchecked missed call (voice/
videophone call) or unread information (mail/SMS), if any,
by flashing the light while the terminal is folded.
me[Settings & NW
◆ Setting the lighting patterns and colors for
incoming call/mail 

me[Settings & NW
Select the Lighting pattern fielde1-6
services]e26e1 or 2
field is "ON", the light flashes at intervals of
approximately 6 seconds according to Light color for
Call in Light alert. When there is unread information,
the light flashes at intervals of approximately 6
seconds according to Light color for Mail in Light alert.
Checking a newly arrived information stops blinking.
•
the priority below :
a Missed call (voice/videophone call)
b Unread information (mail/SMS)
When you set indicator light to "ON", if about 6 hours elapsed
since the last information was received or you delete
(the number indicates the number of items) from the
stand-by display, the light stops flashing even if you do not
check the information.
Light alert
Setting the lighting patterns and colors used for an incoming call/mail or
during a call
• This setting is reflected to Light alert in Call alert,
Videophone alert and Mail alert.
services]e251
• When setting to "Sync melody", the light blinks in
"Rainbow". Note that it may not be synchronized
depending on the melody.
• When there is newly arrived information with Indicator
light set to "ON", the lighting color for the presence of
newly arrived information is as set for incoming call or
mail with "Sync melody" set.
• When you select "Sync melody" or "OFF", go to Step
4.
• When there are unchecked missed calls when this
✔INFORMATION
• If there is multiple newly arrived information, the light turns on in
Select the Light color fieldeSelect a lighting
color
❖ Light alert priority
When setting Light pattern and Light color for Light Alert of the
light in multiple functions, Light turns on in order of the priority
below.
a Alert by contact of the terminal phonebook
b Alert/image by group of the terminal phonebook
c Light alert/Call alert/Videophone alert/Mail alert
◆ Setting lighting and lighting color during a
call 
me[Settings & NW
services]e25e2eSelect the
Light fielde1 or 2
• With this field set to "ON", the lighting color can be
set.
72
Sound/Screen/Light Settings
Setting the Light alert for incoming calls
and mail/messages
F905i_E2kou
F905i.book
Page 73
Monday, April 21, 2008
10:53 AM
Select the Color fieldeSelect a lighting
colorep
◆ Setting lighting for opening, closing and
turning 
me[Settings & NW
services]e253e1 or 2
Font size
Changing font size
MENU [Settings & NW services] 74
The size of font used for full-screen entry of notepad,
message text, etc. or for displaying screen memo, i-mode
site, Full Browser or mail can be changed.

When setting with All listed
me[Settings & NW
1e1-6
services]e271
Setting i-mode : 2e1-5
Setting Full Browser : 3e1-4
Setting Mail view : 4e1-5
Setting Text input : 5e1-6
Setting Phonebook & log : 6e1 or 2
Clock format
Setting clock display
MENU [Settings & NW services] 212
Whether to display clock, the design, size or layout of
clock display on the stand-by display can be set. The
language to use to display the day of the week or the
display format can also be set.
me[Settings & NW
services]e724eSet the required
itemsep
Style : Set if you display clock. Select the clock style
from "Analogue", "Digital 1-4" and "World time clock"
when setting it to "ON".
• When "World time clock" is set, the Japan's time
and the time in the specified time zone appear on
the left and right sides, respectively.
Time format : Set the clock display format to either "24
hour" or "12 hour".
Clock layout : Set the position to display the clock.
Day : Set if you use Japanese or English to display the
day of the week.
• The display depends on the Select language
setting if "Terminal settings" is set.
World time clock : Set the time zone to be displayed or
set if you enable summer time when "World time
clock" is selected in Style. And, set the name of the
time zone.
• When Summer time is "ON", the displayed time is
set forward one hour from the time of the specified
time zone.
Sound/Screen/Light Settings
73
F905i_E2kou
F905i.book
74
Page 74
Monday, April 21, 2008
Sound/Screen/Light Settings
10:53 AM
F905i_E2kou
F905i.book
Page 75
Monday, April 21, 2008
10:53 AM
Security Settings
75
F905i_E2kou
F905i.book
Page 76
Monday, April 21, 2008
10:53 AM
Security code
Security code available with the terminal
Some of the convenient terminal functions require entry
of security code. In addition to the terminal security code
for using some terminal functions, there are several types
of security codes such as network security code for
network services and i-mode password. Use these codes
appropriately for the terminal.
• The terminal security code, network security code or imode password entered is masked with " ".
Precautions related to security codes
• If you forgot your security codes, or fingerprint
authentication for all of the fingers registered is
disabled when Fingerprint access is "ON", you need to
bring a document (such as a driver's license) for
identifying that you are a subscriber, the terminal and
UIM to a FET Repair Center.
For details, contact the phone number for "General
Inquiries" on the back of this manual.
❖ Terminal security code
The default security code is "0000", which you can change by
yourself.➝P107
• If a wrong terminal security code is entered 5 times
consecutively, the power is turned OFF.
• For the setting using Verify fingerprint, the fingerprint
authentication screen appears instead of the terminal
security code entry screen. Press m to switch the
terminal security code entry screen. The terminal security
code cannot be entered when Fingerprint access is "ON".
❖ i-mode password
A 4-digit "i-mode password" is required to store or delete sites
in My Menu or apply to or cancel Message Service or i-mode
pay sites. The default security code is "0000", which you can
change by yourself.➝P152
There may be passwords required by individual IPs
(Information Providers).
❖ PIN code/PIN2 code
The PIN code and PIN2 code are set for the UIM. Both of the
default security codes are "0000", which you can change by
yourself.➝P107
PIN code is a number (code) to be entered each time UIM is
inserted or the terminal is powered ON to confirm the user and
to prevent unauthorized use of the terminal. Making/receiving
calls and terminal operations are enabled by entering PIN
code.
The PIN2 code is the security code to be used when
requesting the issuance of a user certificate, resetting Total
calls cost or changing settings of Reset call cost.
76
Security Settings
• When inserting UIM that has been used with another
terminal, the PIN code and PIN2 code should be the same
ones set previously. If no changes have been made to PIN
code and PIN2 code, your codes are "0000".
F905i_E2kou
F905i.book
Page 77
Monday, April 21, 2008
10:53 AM
❖ PUK (PIN Unblocking Key)
PUK is a number of 8-digit code used to unblock PIN or PIN2
lock. You cannot change PUK by yourself.
• If a wrong PUK is entered 10 times consecutively, the UIM
is locked.
Enter PIN code/PIN2 code
Enter PUK.
Input error 10 times
in a row
OK
Contact a DoCoMo
shop
Setting a new PIN
code/PIN2 code is
enabled
✔INFORMATION
• When using Password manager with the fingerprint
authentication and a terminal security code access enabled,
change the terminal security code. For the new terminal security
code, avoid use of an easily-guessed number such as the loworder 4 digits of the phone number and take care not to let
others know the terminal security code. Keep a separate note
of the set security codes.
* Note that DoCoMo is not liable for any damages caused
through incorrect use of the data by a third party.
Terminal security code change
Changing terminal security code
◆ Setting whether to require entry of PIN code
when turning power ON 
If a wrong PIN code is entered 3 times consecutively, the PIN
code is locked. Press g and enter PUK.
• The PIN code entry screen is displayed only when the
current setting is changed.
Input error 3 times
in a row
Setting PIN code
me[Settings & NW
services]e453e1 or
2eEnter PIN code
❖ When PIN1 code ON/OFF is set to "ON"
When the terminal is powered on, the PIN code entry screen
is displayed. The stand-by display appears when correct PIN
code is entered, but all operations are disabled when not.
• You can make emergency calls (112) even while PIN code
entry screen is being displayed.
✔INFORMATION
• When the date/time specified in Alarm clock or schedule has
ome with Alarm auto power ON is "ON", the power is turned ON
and the alarm starts sounding before the PIN code entry screen
is displayed. When f is pressed to stop the alarm, the PIN
code entry screen is displayed. Even if a downloaded melody,
i-motion or music is set as an alarm, operations are carried out
as specified in the default settings.
me[Settings & NW
services]e461eAuthenticateeE
nter new terminal security code
Enter the new terminal security code in New
security codecheck fieldep
Security Settings
77
F905i_E2kou
F905i.book
Page 78
Monday, April 21, 2008
10:53 AM
◆ Changing PIN/PIN2 code
• To change the PIN code, you need to set PIN1 code ON/
OFF to "ON".
me[Settings & NW
services]e45e1 or
2eAuthenticate
Enter the current PIN/PIN2 codeeEnter a new
PIN/PIN2 code in the New PIN/PIN2 code entry
fieldeEnter the new PIN/PIN2 code in the New
PIN/PIN2 code - check fieldep
• If the PIN/PIN2 code was not correctly entered, a
screen indicating the failure of authentication
appears. Press g and enter the correct PIN/PIN2
code. If a wrong code is entered 3 times
consecutively, the PIN code is locked. Press g and
enter the PUK.
✔INFORMATION
• Even if PIN2 code is locked by entering incorrect PIN2 code 3
times consecutively, making/receiving calls, PushTalk calls or
sending/receiving mail is enabled; if PIN code is locked by
entering incorrect PIN code 3 times consecutively, these
operations are disabled.
Unblocking PIN/PIN2 code
◆ Precautions for using fingerprint
authentication
• This function is used to authenticate the information on the
characteristics of fingerprint image. For this reason, user
with fingerprint that does not provide enough
characteristics information may not be able to use the
fingerprint authentication.
• The 3 readings with the same finger are needed to register
your fingerprint. Do not register the different finger.
• Authentication performance (the probability of successful
fingerprint authentication for correct sliding of the finger)
depends on the condition of use. The finger conditions
below may make fingerprint registration difficult or reduce
the authentication performance. Taking measures
according to the condition of your finger including washing
hands, wiping hands, using a different finger for fingertip
authentication and applying cream if the hand is rough or
dry may improve the authentication performance.
- Fingers are wrinkled, wet or sweaty after taking a bath, etc.
- Fingers are sweaty or oily enough to obscure ridges of fingertip,
or fingers are soiled with dirt or oil
- Rough or damaged (cut, inflamed, etc.)
- Extremely dry or having tendency to get dry
- Became fat or thin to cause the fingerprint to change
- Fingerprint unclear by wearing away
- Surface in a condition extremely different from that at the time
of fingerprint registration
Figure A
Fingerprint sensor area
Figure B
If a wrong PIN/PIN2 code is entered 3 times consecutively
on the PIN code entry screen, lock is set. If this happens,
unblock and enter a new PIN code.
On the confirmation screen of the PUK,
"OK"eEnter the PUK (8 digits)
Enter a new PIN/PIN2 code in the New PIN/PIN2
code entry fieldeEnter the new PIN/PIN2 code
in the New PIN/PIN2 code - check fieldep
Using fingerprint authentication
Use of the fingerprint authentication allows you to skip
the operation of entering the terminal security code with
keypads by sliding your fingertip on the fingerprint
sensor.
• Even with fingerprint authentication set, pressing m on
the fingerprint authentication screen displays the terminal
security code entry screen, allowing to enter terminal
security code for authentication. The terminal security code
cannot be entered when Fingerprint access is "ON".
• Simultaneous use of the fingerprint authentication and a
terminal security code access➝P107 INFORMATION in
"Security code available with the terminal"
78
Security Settings
• For registration/authentication of fingerprint, align the first
joint of one of your fingers to the center of the fingerprint
sensor, let your finger contact the sensor while sliding your
finger downward and keep sliding your finger until the
fingerprint sensor becomes visible. When sliding your
finger, keep it in the same direction as the terminal. If not,
the likelihood of authentication failure due to difference in
finger positions at registration and authentication becomes
higher.
• If the sliding movement is too fast or too slow, the
fingerprint may not be correctly recognized. Follow the
instruction message on the screen to adjust the sliding
speed.
• Slide your finger over the fingerprint sensor area (enclosed
in a frame in Figure A).
F905i_E2kou
F905i.book
Page 79
Monday, April 21, 2008
10:53 AM
• The center of the whorl of the fingerprint may be largely
•
•
•
•
•
•
displaced or distorted, which is more often the case with
thumbs. Since this may make registration difficult or reduce
the authentication performance, check the center of the
whorl of your fingerprint and rub your finger against the
fingerprint sensor in such a way that the center of the whorl
passes along the center of the fingerprint sensor as shown
in Figure B.
For sliding your finger on the fingerprint sensor, do not set
up your finger on the sensor but place it on the fingerprint
sensor in such as way that the right finger is parallel to the
sensor.
Each finger has a different fingerprint. For authentication,
use the finger set for use.
If the fingerprint was not correctly read, a warning message
appears. If the fingerprint was not authenticated within a
certain period of time, a confirmation message appears and
the screen returns to the previous screen.
When fingerprint registration or authentication is started
with the finger put on the fingerprint sensor, a screen
indicating failure of the activation may appear. Put the
finger off from the fingerprint sensor and retry the operation.
When connecting the terminal using a USB cable to a
device which requires grounding such as a desktop PC,
make sure that the device is grounded in advance. If the
connected device is not grounded, fingerprint
authentication may be disabled. In such a case, carry out
fingerprint authentication while touching a metallic part
(frame, external connection jack, etc.) of the connected
device or after disconnecting the terminal from the device.
Fingerprint authentication technology does not guarantee
complete identity authentication or verification. Please be
notified that DoCoMo assumes no responsibility for any
damage caused by use of this product or failure to use this
product.
◆ Fingerprint sensor
• The conditions below may cause failure or damage of the
surface of the finger print sensor.
- Strike or give a hard shock
- Scratch or pick with a pointed object
- Rubbed hard with a fingernail or hard object (such as metal
piece of strap) and scratched
- Fingerprint sensor touched with a hand soiled with dirt, etc. and
the fingerprint sensor surface soiled or scratched by fine foreign
objects, etc.
- Covered with a sticker or painted with ink, etc.
• The conditions below may make fingerprint scanning
difficult or reduce the authentication performance. Clean
the fingerprint sensor surface from time to time.
- Tainted with dust or sebum, or moisture such as sweat is
attached and condensed
• If any of the phenomena below occurs, clean the fingerprint
sensor. The phenomena may be improved.
- "Clean surface of sensor." appears
- Fingerprint registration or authenticatithe terminalon fails often
• To clean the fingerprint sensor, wipe its surface with a dry,
soft, static-free cloth. Long-term use may cause the
fingerprint sensor to get dusty. Do not attempt to remove
the dust with a pointed object.
• Static electricity may cause malfunction. Before placing the
finger on the fingerprint sensor, eliminate static electricity
by touching a metal object with the hand, etc. Take
particular care in dry seasons such as winter.
◆ Registering fingerprint to be used for
authentication 
• Up to 10 fingerprints can be registered.
me[Settings & NW
services]e462eAuthenticatee
"OK"ePress the sensor with your finger and
slide slowly downwards by following the
instruction message
Enter a display nameep
• Up to 10 two-byte (20 one-byte) characters can be
•
entered.
appears with the finger print set for use.
◆ Set whether to use only fingerprint
authentication for authentication

• When setting Fingerprint access to "ON", 2 or more
registrations of different fingers and use for authorize are
required.
• When setting Fingerprint access to "ON", authentication
using terminal security code is disabled. If authentication is
disabled for any registered fingers due to the terminal’s
operating conditions, finger conditions, failure of the
fingerprint sensor or other reasons, you need to bring a
document (such as a driver's license) for identifying that
you are a subscriber, the terminal and UIM to the FET
Service Center.

Setting to "ON"
me[Settings & NW
"OK"ea
services]e463eAuthenticate
Canceling : 2
Security Settings
79
F905i_E2kou
F905i.book
Page 80
Monday, April 21, 2008
10:53 AM
◆ Authenticating fingerprint
Deleting all data at a time :
me33e"Yes"
When the fingerprint authentication screen
appears, slide your fingertip on the fingerprint
sensor.
Renaming data : me4eEdit the nameep
Changing the order : Place the cursor on the
fingerprint and me5 or 6
Restricting mobile phone operations
Various lock functions
The terminal is equipped with various lock functions. You
can choose the function to suit your needs.
Fingerprint authentication
Fingerprint access
• For fingerprint authentication, press the finger set for
use against the fingerprint sensor.
• If the authentication is failed, remove the finger from
the fingerprint sensor and retry authentication. When
authentication performance is low, retry the
fingerprint registration.
• Pressing m or a keypad displays the terminal
security code entry screen, except when Fingerprint
access is "ON".
✔INFORMATION
• If fingerprint authentication failed 5 times consecutively, the
terminal security code entry screen appears. If authentication
failed 5 times consecutively when Fingerprint access is "ON",
the power is turned OFF. The cumulative number of
authentication failure is cleared by correct authentication or
redisplaying of fingerprint authentication screen.
◆ Managing fingerprint
You can delete fingerprint set for authentication, or change
the registered name, etc.
• If all fingerprints set for authentication are canceled or
deleted, the fingerprint authentication becomes
unavailable.
• When setting Fingerprint access to "ON", and there are 3 or
more registered fingerprints set for authentication, the
fingerprints can be deleted after canceling authorize. Note
that if there are 2 or less fingerprints, they cannot be
canceled authorize or deleted.

Deleting fingerprint (1 item)
me[Settings & NW
Place the cursor on a fingerprint to delete and
me31e"Yes"
services]e462eAuthenticate
• To check the registered fingerprint, press t.
Setting/canceling authentication : Select a
fingerprint to set/cancel authentication
appears with the finger print set for use.
Deleting selected items : me32eSelect
fingerprint'sepe"Yes"
80
Security Settings
Lock
functions
Description
Page
All lock
This function disables menu
operations to prevent unauthorized
use by others
P111
Self mode
This function disables all functions
that require communications such as
calls, i-mode, mail, infrared
communication
P112
Personal
data lock
Temporarily restrict use of i-mode,
mail, personal information, etc.
P112
Keypad dial This function prevents from making
lock
calls by using of the keypads
P113
Privacy
mode
Setting operations for using or
displaying personal information
P114
Receive
display
option
Set if you display information such as
a name when receiving a call or mail
from a party saved in the phonebook
or phonebook
P118
Side key
hold
This function disables P, M and the
side keys [ţŕ] when the terminal is
folded to prevent inadvertent
operations
P119
Lock on
close
Each time the terminal is folded, keys
except P, M or the side keys [ţŕ]
are disabled to avoid unauthorized
use of the terminal by others
P119
• Multiple lock functions can be set simultaneously.
• You can make emergency calls (112) even when lock
functions are set.
All lock
Preventing unauthorized use
When All lock is activated, menu operations are disabled
to prevent unauthorized use by third parties.
To make an emergency call (112) in All lock, enter the
emergency call number on the stand-by display and
press n.
* The emergency call number entered on the terminal
security code entry screen is marked with " ".
■ For Verify fingerprint
Press m on the stand-by display, enter the emergency
call number on the fingerprint authentication screen and
press n.
F905i_E2kou
F905i.book
Page 81
Monday, April 21, 2008
10:53 AM
■ When Fingerprint access is "ON"
Press mn on the stand-by display, enter the
emergency call number and press n.
• The microSD memory card and UIM remain unlocked.
me[Settings & NW
services]e412eAuthenticate
"All locked." appears on the stand-by display.
Canceling : Enter the terminal security code on the
stand-by display.
• If fingerprint authentication is set, press m and
perform authentication.
• The functions below are available.
- Receiving voice/videophone calls*1
- Receiving i-mode mail and SMS*2
- Auto-updating pattern definitions
*1 Only a phone number appears, but the other party's name
or image saved in phonebook does not. The incoming
image, ring alert and other settings are reset to default
settings, and the default image appears as videophone
substitute image. Chaku-moji can be received, but it does
not appear on the incoming call screen. It appears in
Received calls when All lock is canceled.
*2 No receiving actions such as displaying the receiving or
reception result screen, emitting ring alert are taken.
*3 Even when the requestor ID of Location request matches a
phonebook entry, the requestor name does not appear.
✔INFORMATION
• A call is received regardless of the settings of Specified caller.
• Even if a stand-by display is set, the image set by default
appears.
• All lock takes precedence over it even if Lock on close is "ON".
• The alarm clock and schedule reminder do not operate even
when the specified date and time arrives.
Security Settings
81
F905i_E2kou
F905i.book
Page 82
Monday, April 21, 2008
10:53 AM
Self mode
Preventing making/receiving calls
MENU [Settings & NW services] 58
This function disables all functions that require
communications such as calls, i-mode, mail, infrared
communication.
c (1 sec. or more)e"Yes"
appears on the stand-by display.
Canceling : c(1 sec. or more)e"Yes"
✔INFORMATION
• If emergency calls (112) are dialed, Self mode is canceled.
Personal data lock
Disabling to use personal information
You can temporarily restrict use of i-mode, mail, personal
information, etc.
• This function cannot be activated when Unregistered caller
is "ON".
• Calls made or received in Personal data lock are recorded.
Making calls from Redial or Received calls is enabled.
me[Settings & NW
services]e413eAuthenticatee
1 or 2
When "ON" is set,
appears on the stand-by display.
❖ When Personal data lock is ON
All or a part of the settings in the functions below are
unavailable : The microSD memory card and UIM remain
unlocked.
- receive Mail*1and SMS*1
- i-mode, Check new message, Full Browser
- i-αppli
- Phonebook, Ans.Machine & Voice memo (Movie memo),
Mail logs*2
- Data Box (All functions)
- Bar code reader, Ir/PC connection*3, microSD, Camera,
Sound recorder*4
- Notepad, Alarm clock
- Call ring alert, Mail ring alert, Alarm sound, Display turn
sound, Melody effect sound, Image/i-αppli, Reset of Menu
preference, Call image (excluding Contact image), Mail
image, Kisekae/Themes, Sound & Image, Anonymous
caller, Headset key control, Reject/Accept call, Videophone
dialing, Videophone receiving, Video image*5, Reset, Delete
all data, Alert settings
- Music player
- IC card content, DCMX, ToruCa, Search by i-mode
- User information
- 1Seg
*1 Automatic reception is enabled, but none of receiving
actions such as displaying the receiving or reception
82
Security Settings
*2
*3
*4
*5
result screen, emitting ring alert are not taken. Mail creation from Mail logs is also disabled.
Only a mail address appears, but the other party's name
or image saved in phonebook does not.
Data transfer in infrared communication or using USB
connection is disabled.
The default image appears as videophone substitute
image.
Chaku-moji can be received, but it does not appear on an
incoming call screen. It appears in Received calls when
Personal data lock is canceled.
F905i_E2kou
F905i.book
Page 83
Monday, April 21, 2008
10:53 AM
✔INFORMATION
• When making/receiving a call to/from the party saved in the
•
•
•
phonebook, neither name nor image saved appears and only
the phone number appears.
does not appear on the stand-by display even when Answer
machine is activated, and an icon for a recorded message
which has not been played is also not displayed.
When data to which Personal data lock applies is set as the
stand-by display or ring alert, the default setting becomes active
in Personal data lock (when menu is a Kisekae menu except the
one set by default, Basic menu appears). The setting you made
is restored when canceled. When data saved in "Preinstalled"
folder is set, however, the setting does not change even in
Personal data lock.
On Basic menu or Custom menu, icons of functions and parties
with activation restricted are changed to
and person names
appear as "***". For Kisekae menu, the font color is displayed in
gray or the reason is displayed why activation cannot be
performed.
Privacy mode
Setting operations for using or displaying personal information
You can set to require authentication each time using
personal information such as phonebook, not to display
a phonebook or schedule with secret attribute or not to
display calls or mails sent/received from parties with
secret attribute.
• Items and settings of Privacy mode are as follows :
❍ : Setting - : No setting
Setting
Item
Show all
Hide set
contact/
Hide
secrecy
Authorized
fldrs/Hide
access
secrecy
album/Hide
set
schedule
Keypad dial lock
Phonebook & Logs
❍
❍
❍*
Prohibiting keypad dial
Mail & Logs
❍
❍
❍*
My Picture
❍
❍
❍*
i-motion
❍
❍
❍*
Other
me[Settings & NW
❍
❍
❍*
Schedule
services]e414eAuthenticatee
1 or 2
❍
❍
❍*
Notepad
❍
❍
i-αppli
❍
❍
When "ON" is set,
Bookmark
❍
❍
❍*
Screen memo
❍
❍
You can set so that calls or PushTalk calls cannot be
made without using Phonebook.
appears on the stand-by display.
❖ When Keypad dial lock is ON
The operations below cannot be performed :
- Making calls from Redial or Received calls*1
- Editing, adding, deleting entries or setting group of
Phonebook
- Editing and resetting recorded user information data
- Phone To (AV Phone To), SMS To and Mail To functions
- Phonebook data or user information transfer to/from external
devices
- Sending mail/SMS*1, Sending from Mail logs*1
- Reading template on the mail creation screen, creating mail
from the mail template list screen or the detail view screen
of mail template*2
- Using network services by the dial up operation
- Packet communication with a PC
*1 Calls/messages can be made or sent to parties saved in
Phonebook.
*2 A mail can be created from a template that a mail
address saved in the phonebook is entered as the destination.
* Setting secrecy is required.
Phonebook➝P82, Bookmark➝P154, Mail➝P188, My
Picture, i-motion, Other➝P302, Schedule➝P346
• To enable Privacy mode settings, you need to start Privacy
mode. You can also set automatic activation.
• If Contact setting is not performed after changing
phonebook entry secret attribute or editing the phone book
entry, activating Privacy mode does not hide mail or SMS
of the changed or edited phonebook entry. To hide them,
perform Contact setting.➝P117
Security Settings
83
F905i_E2kou
F905i.book
Page 84
Monday, April 21, 2008
10:53 AM
◆ Setting Privacy mode operation
me[Settings & NW
services]e421eAuthenticateeS
et the required itemsepeg
Phonebook & Logs : When using Phonebook, you can
set if you perform authentication.
• With "Hide set contact" set, phonebook entries or
groups (including phonebook entries in those
groups) with secret attribute, redial, received calls,
mail or SMS for parties with secret attribute do not
appear. When there is an incoming mail or SMS
from a party with secret attribute set, it is received,
but not notified on the screen or with ring alert. With
Incoming: privacy mode set, you can check newly
arrived information by the battery icon.
Mail & Logs : Set if you require authentication before
using mail or mail logs, etc.
• With "Hide secrecy fldrs" set, folders with secret
attribute do not appear. When a mail is received
from a party to be sorted to a folder with secret
attribute, it is not notified on the screen or with ring
alert. With Incoming: privacy mode set, you can
check newly arrived information by the battery
icon.
My Picture : Set if you require authentication before
using My Picture.
• With "Hide secrecy album" set, albums with secret
attribute do not appear.
i-motion : Set if you require authentication before using
i-motion.
• With "Hide secrecy album" set, albums with
secrecy are not displayed. When a movie/i-motion
in an album with secrecy is added to playlist, the
title in the playlist is not displayed either.
Other : Set if you perform authentication when using
other (Word, Excel, PowerPoint) files.
• With "Hide secrecy fldrs" set, folders with secret
attribute do not appear.
84
Schedule : Set if you perform authentication when
using Scheduler.
• With "Hide set schedule" set, schedules with secret
attribute do not appear.
Notepad : Set if you perform authentication when using
Notepad.
i-αppli : Set if you require authentication before using iαppli.
Bookmark : Set if you perform authentication when
using Bookmark.
• With "Hide secrecy fldrs" set, folders with secret
attribute do not appear.
Screen memo : Set if you require authentication before
using Screen memo.
Incoming: privacy mode : Set if you notify the
presence of newly arrived information by changing
the battery icon type when there is an incoming call or
mail from a party of a phonebook entry with secrecy
or when a mail is received from a party to be sorted to
a folder with secrecy. Select a battery icon to appear
or select "OFF".
Auto start : Set the time period till Privacy mode
automatically starts when you do nothing on stand-by
display.
Security Settings
◆ Activating Privacy mode
l (1 sec. or more)
Canceling : l (1 sec. or more)eAuthenticate
• When Auto start of Privacy mode setting is other than
"OFF", Privacy mode is activated when the set time
elapses while the stand-by display is on.
❖ When Privacy mode is activated
There are restrictions as below depending on the contents set
by the items of Privacy mode.

• There is unavailable i-αppli.

• When displaying mail group, mail sort or starting Chat mail,
an authentication is required.

• When sending mail with a still image shot during a call,
even if a mail address of the party you are talking over a call
is registered in the phonebook, that mail address is not
entered as a destination.
F905i_E2kou
F905i.book
Page 85
Monday, April 21, 2008
10:53 AM

• Authentication is required to use Redial, Received calls,
Recorded messages and Voice memos.
• Only a phone number or mail address appears, but the
name or image saved in Phonebook does not. The ring
alert, vibrator or Substitute image set in Phonebook does
not operate; they operate as set in the terminal. Ring alert
delay is also activated by reception from a party registered
in the phonebook.
• Missed calls or Recorded messages do not appear in the
newly arrived information area of Info/calendar layout.
• A mail address appears, but the name saved in Phonebook
from mail or Mail logs does not.
• On the member list of Scheduler, member names do not
appear.
• Persons saved to Custom menu cannot be selected. The
icon changes to
and a person's name appears as "***".
• Headset quick-dial is disabled even if Phonebook No. of
Headset key control is set.

• Newly arrived information for parties with secret attribute
does not appear. No displays are given to redial*1, received
calls*1, 2, recorded messages, voice memo while talking,
Inbox/Outbox/Unsent messages list, or Mail logs.
• Unread messages, Missed calls or Recorded messages for
parties with secret attribute do not appear in the newly
arrived information area of Info/calendar layout.
• Images, movies/i-motion and vibrator saved in a
phonebook entry with secret attribute operates for incoming
calls according to the setting of the terminal. The call
reception screen shows a phone number, but the name.
• On the member list of Scheduler, member names of
phonebook entries with secret attribute do not appear.
• On Custom menu, parties of phonebook entries with secret
attribute do not appear.
• If a phonebook entry with secrecy is set to Phonebook No.
for Headset key control, that Phonebook No. is disabled for
Headset quick-dial.

• Unread messages do not appear in the newly arrived
information area of Info/calendar layout.
• Authentication is required when searching a mail using
Phonebook or Scheduler, displaying mail logs,
downloading, upgrading or deleting Message i-αppli.

• When a mail is sent or received to/from a party to be sorted
to a folder with secret attribute, it is not notified with newly
arrived information or Mail logs.
• Mail from a party to be sorted to a folder with secret attribute
do not appear in the newly arrived information area of Info/
calendar layout or Unread messages.
• When a received message compatible with Message iαppli is saved in a folder with secret attribute, even if a
Message i-αppli is downloaded, they are not automatically
sorted to the folder for Message i-αppli.

• With a movie/i-motion not in "Preinstalled" folder set for a
ring alert or incoming/outgoing call image, it operates as
specified in default settings. Functions with a movie/imotion in "Preinstalled" folder set, if any, operate
depending on the priority of ring alert or incoming/outgoing
image.
• Movie/i-motion set for the stand-by display are displayed.
• When using data in My picture or i-motion in settings for
various functions, an authentication is required. A screen
appears indicating that an item for some functions set for
hiding is reflected after Privacy mode is canceled.

• If an image not in "Preinstalled" folder is set for schedule, it
operates as specified in default settings.
• Still images or movies with frames cannot be shot.
• Images except those in "Deco-mail picture" and "Deco-mail
pict" folders do not appear in Deco-mail picture or Decomail pict list currently used for mail creation.
• Even when data items in the terminal phonebook are
copied or backed up to the microSD memory card, still
images set in the terminal phonebook are not copied or
backed up.

• If a movie/i-motion not in "Preinstalled" folder is set for
alarm or schedule, it operates as specified in Alarm clock
sound or Schedule sound of Alarm sound. Note that, if a
movie/i-motion not in "Preinstalled" folder is set for alarm or
schedule reminder, it operates with the default setting.
Security Settings
85
F905i_E2kou
F905i.book
Page 86
Monday, April 21, 2008
10:53 AM

• The Calendar set in Info/calendar layout, a red mark
indicating that a Schedule is set does not appear in the
upper right of a date.

• No schedule area appears for Info/calendar layout.
• The Calendar set in Info/calendar layout, a day set as
holiday by Days off for the schedule does not appear in red,
it is reset to default settings.
• Schedule reminder does not sound when the specified time
has arrived.
• Even when the specified date/time comes, recording
reservation of 1Seg is not activated.

• Schedule reminder for a schedule with secret attribute does
not sound even when the specified date and time arrive.
• Schedules with secret attribute do not appear in the
schedule area of Info/calendar layout. It is not included in
the number displayed in No. of items.

• List of notes and Note in Info/Calendar layout are not
displayed.

• Authentication is required to select a folder for Message iαppli or to download i-αppli.
• When setting i-αppli on the stand-by display with Stand-by
display, an authentication is required. A message appears
indicating that an item set for hiding is reflected after
Privacy mode is canceled.

• When overwriting a screen memo, an authentication is
required.
✔INFORMATION
• The Browser histories of i-mode and full browser do not display
other browser histories than those in Privacy mode.
• If all items except Incoming: privacy mode and Auto start are
•
•
•
•
"Show all", Privacy mode is not activated. If Privacy mode is
already activated, it is cancelled.
Deleting all data or perform "Delete all items" with the functions
below also deletes the data hidden in Privacy mode.
- Redial/Received calls
- Recorded messages
- Phonebook entry
- Mail*
- Mail logs
- Schedule
- Voice memos
* Also when you perform an operation except "Delete one
item" or "Delete selected item", hidden mails are deleted.
When Phonebook & Logs of Privacy mode setting is changed
from "Show all" or "Authorized access" to "Hide set contact" in
Privacy mode, a massage appears indicating that Contact
setting is to be made to reflect the privacy to mail.
Depending on the settings of Privacy mode, when using mail or
schedule from i-αppli in Privacy mode or save data in My
Picture, a message may appear indicating that the specified
function cannot be performed.
Once authentication is performed to use the function set to
"Authorized access" in Privacy mode, no more authentication is
required before returning to the stand-by display. The same
situation occurs when using multiple functions set to
"Authorized access".
 When sending an image saved in My Picture
through mail attachment in Privacy mode (when Phonebook &
Logs and My Picture is "Authorized access"), authentication is
not required to display Phonebook on a mail creation screen
because it is carried out when displaying My Picture.
◆ Canceling Privacy mode temporarily
On a list screen containing hidden data, etc., you can
temporarily cancel the privacy state to display hidden data.
• The temporary cancellation is active until the stand-by
display reappears. You may not be able to perform
temporary cancellation depending on the screen.
86
Security Settings
On the screen to be temporarily cancelled, c
(1 sec. or more)eAuthenticate
F905i_E2kou
F905i.book
Page 87
Monday, April 21, 2008
10:53 AM
◆ Hiding mails from/to senders/receivers with
secret attribute in the phonebook 
When performing Contact setting after secret attribute of a
phonebook entry is changed or a mail received via data
communications is saved to the terminal, secret attribute can
be set to sent or received mail and SMS in correspondence
with phone numbers or mail addresses in the phonebook
entry with secret attribute.
• In Privacy mode (when Phonebook & Logs is "Hide set
contact"), mail or SMS with secrecy does not appear.
•
•
•
lock.
• With "Privacy mode" not set, in Privacy mode (when
Phonebook & Logs is "Hide set contact"), this setting takes
precedence in operations for incoming calls and mail/
messages.
• The incoming operation when setting Privacy mode and
Receive display option are as listed below.
Operate according to the priority of Select ring alert➝P88
● : Operate according to the settings of the terminal
regardless of multiple incoming call settings
× : No incoming call operation
me[Settings & NW
services]e422eAuthenticatee"Y
es"
✔INFORMATION
• If Contact setting is not performed after changing phonebook
•
• This setting takes priority over the settings of Personal data
entry secret attribute or editing the phone book entry, activating
Privacy mode does not hide mail or SMS of the changed/edited
phonebook entry.
Mail and SMS to have secret attribute are as follows :
- Sent/unsent messages or SMS with secret attribute in
phonebook entries saved in destination address (TO, CC,
BCC)
- Received messages or SMS sent from phonebook entries
with secret attribute
appears at the top of the display and the terminal is in the
data transfer mode (same condition as out of service area)
during Contact setting, the terminal is not available for phone
calls, i-mode operation or data communication. Also, you
cannot switch to other functions by pressing s.
When returning to the stand-by display after receiving an
external phonebook entry with secret attribute or setting secret
attribute for a phonebook entry, a confirmation screen appears
asking if you reflect the secret attribute of the phonebook entry
to mail. Select "Yes" to perform Contact setting. With Privacy
mode inactive, a message appears prompting you to set
Privacy mode.
Performing Contact setting in the cases below causes
cancellation of secret attribute for the related mail and/or SMS :
- When secret attribute of a phonebook entry is canceled
- When a phonebook entry with secret attribute is changed
(targeted at a previous phone number or mail address)
- When a phonebook entry with secret attribute is deleted
(including deletion of the phone number or mail address of the
phonebook entry)
Receive display option
Disabling display of a caller's or
sender's name, etc. of a call or mail
received
You can set if you display information such as a name
when receiving a call or mail from a party saved in the
phonebook.
Receive display option
(Call display)
Privacy mode is ON.*1
Phonebook Show all
& Logs
i-motion
Privacy
mode
Phone Caller
No.
name
only
only
Caller
name+
Phone
No.
❍
❍
❍
❍
Authorized
access
●
❍
❍
❍
Hide set
contact*2
●
❍
❍
❍
Show all
❍
❍
❍
❍
Authorized
access*4
●
●
●
●
Receive display option
(Message display)
Privacy mode is
ON.*1
Phonebook &
Logs
Mail Sender
Privac addres name Ticke No
y mode
ticker
s+
Subject Subject
Show all
❍
❍
❍
❍
❍
Authorized
access
●
●
❍
●
●
Hide set
contact*2
✕
❍
❍
❍
✕
Show all
❍
❍
❍
❍
❍
Authorized
access
❍
❍
❍
❍
❍
Hide
secrecy
fldrs*3
✕
❍
❍
❍
✕
i-motion Show all
❍
❍
❍
❍
❍
Authorized
access*4
●
●
●
●
●
Mail &
Logs
*1 It is assumed that multiple functions are not set simultaneously.
*2 Only for phonebook entry with secret attribute set.
*3 Only when sorted to the folders with secrecy set.
Security Settings
87
F905i_E2kou
F905i.book
Page 88
Monday, April 21, 2008
10:53 AM
*4 For when movie/i-motion in except "Preinstalled" folder is set
as ring alert in Alert by contact or Alert by group.
◆ Setting receive display option
me[Settings & NW
services]e44eAuthenticateeSet the
required itemsep
Call display : Set if you display a name and phone
number when receiving a voice or videophone call
(including during communications).
• With "Privacy mode" set, no names appear in
Privacy mode (when Phonebook & Logs is
"Authorized access" or "Hide set contact").
• When "Caller name+Phone No." is set, a phone
number and name appear for an incoming voice
call or videophone call. And, name or phone
number appears on the sub-display.
Message display : Set how to display results of mail
reception.
• With "Privacy mode" set, no names appear in
Privacy mode (when Phonebook & Logs is
"Authorized access" or "Hide set contact"). In
Privacy mode (when Mail & Logs is "Authorized
access"), the reception result ticker shows only a
message indicating mail reception.
• Even if setting to display the subject, it does not
appear on the sub-display.
• When "Ticker" is set, the reception result ticker or
sub-display shows only a message indicating that
the mail was received.
• When "No ticker" is set, no reception result ticker
appears. Although name, etc., are displayed on the
sub-display, mail address or phone number is
displayed in Privacy mode (when Phonebook &
Logs is "Authorized access"), and nothing is
displayed on the sub-display in Privacy mode
(when Phonebook & Logs is "Hide set contact").
Side key hold
Preventing inadvertent operation of
side keys
This function disables P, M and side keys [▲] while the
terminal is folded, thus avoiding accidental operations of
the terminal (e.g. when carrying in a bag).
m (1 sec. or more)
appears on the stand-by display.
Canceling : m (1 sec. or more)
88
Security Settings
Lock on close
Locking keypad each time the terminal
is folded
When setting Lock on close to "ON", all keys except P,
M and side keys [▼] are locked when the terminal is
folded. Even when Lock on close is canceled, the
authentication screen appears every time the terminal is
opened to prevent unauthorized use by others.
To make an emergency call (112) in Lock on close,
enter the emergency call number from a terminal
security code entry screen, stand-by display or Lock
on close ON screen and press n.
* The emergency call number entered on the terminal
security code entry screen is masked with " ".
■ For Verify fingerprint
On the fingerprint authentication screen, enter the
emergency call number and press n. When a standby display or Lock on close ON screen appears, press
m or s to make an emergency call.
■ When Fingerprint access is "ON"
Press n on the fingerprint authentication screen,
enter the emergency call number and press n. When
a stand-by display or Lock on close ON screen appears,
press mn or sn to make an emergency
call.
F905i_E2kou
F905i.book
Page 89
Monday, April 21, 2008
10:53 AM
• Lock on close is not activated when theterminal is as below.
During a voice call*
While playing melody*
Reception via Infrared communication/iC transmission
During sounding of schedule reminder, alarm clock or
Countdown timer (including during snoozing, counting down
or in stop state)
- While activating Music player*
- Sending/receiving of data using USB connection
- Repeat playing movie saved in microSD memory card
* When the operation completes with the terminal folded,
Lock on close is activated.
❖ When Security indicator is set
If the terminal is closed and the Lock on close is activated, the
light flashes in blue for about 3 seconds. When set to other
than "Right after", if the set time elapses, the light flashes in
blue for approximately 3 seconds to indicate that Lock on
close was activated. Note that when the light flashes in white
for approximately 3 seconds, it indicates that Lock on close
was not activated.
◆ Setting Lock on close "ON"
me[Settings & NW
services]e411eAuthenticateeS
et the required itemsep
Lock on close : Set if you start Lock on close
automatically.
Lock after phone close : Set the time period from
closing the terminal till activating auto start.
❖ When Lock on close is started
Each time the terminal is folded, Lock on close on time set in
Lock after phone close and locks the keys except P, M and
side keys [ţŕ]. Pressing side key [ţ] does not operate
Answer machine, Voice memo or Movie memo.
• To cancel Lock on close, open the terminal and perform
authentication. When the next screen appears, directly
enter terminal security code or perform authentication by
pressing m or s.
✔INFORMATION
• Even with Lock on close, making a call by pressing the switch
of Remote Control with Mic (optional) is available.
• When Lock on close is "ON", it is activated by turning the power
OFF and ON.
• The functions below are available.
- Turning power ON/OFF
- Receiving a voiceor videophonecall
- Auto update of Data Center
- Switching displaying/hiding calendar layout
- Receiving i-mode mail and SMS*
* When receiving with the terminal open, none of receiving
actions such as displaying the receiving or reception result
screen, emitting ring alert are not taken.
◆ Indicating activation of Lock on close with a
light 
You can set if you indicate status of Lock on close with a light.
me[Settings & NW
services]e43eAuthenticatee1 or
Security Settings
89
F905i_E2kou
F905i.book
Page 90
Monday, April 21, 2008
10:53 AM
Restricting calls/mail/data transfer
Accepting/rejecting calls from specified phone numbers
◆ Enabling Accept/Reject call from specified
numbers 
• This setting applies to all phone numbers with Accept/
Reject call set.
Accepting/rejecting incoming call can be set for each
phone number saved in the terminal phonebook.
• To use this function, specifying Accept/Reject call for each
phone number and Specified caller setting are required.
The settings and the operations of Accept/Reject call are as
listed below.
Setting
Accept/Reject call for each phone
number
Accept call Reject call No setting
Specified
caller
Cancel
settings
Accepted
Accepted
Accepted
Reject call Accepted
Rejected*
Accepted
Accept call Accepted
Rejected*
Rejected*
* The call from a specified phone number is disconnected without activating ring alert and the caller hears a busy tone.
• This function is activated only when the other party sends
caller ID.
• Rejected calls are recorded as missed calls.
◆ Specifying phone numbers to accept/reject

Accepting/rejecting incoming call is set for phone numbers
saved in the terminal phonebook.
peSearch the phonebookePlace the
cursor on a phonebook entry to set and
me343eAuthenticateeSelect a
phone numbere1-3
• To accept/reject calls from specified phone numbers,
activate settings of Specified caller in succession to
the above step.
✔INFORMATION
• When you change or delete the phone number with Accept/
Reject call is set, this setting is canceled. Set Accept/Reject call
again for the new number.
90
Security Settings
• Reject call and Accept call are not enabled simultaneously.
me[Settings & NW
services]e551eAuthenticatee
1 -3
Anonymous caller
Setting operations for incoming calls
not to notify caller ID
MENU [Settings & NW services] 1114
MENU [Settings & NW services] 2326
For each reason for hiding caller ID, you can set a
receiving operation for incoming calls notifying no caller
ID.
• For the ring alert and incoming call image for an incoming
voice call that does not notify the caller ID, this setting takes
precedence over the settings of Call alert (Incoming call).
me[Settings & NW
services]e52eAuthenticatee13eSet the required itemsep
(Incoming operation) : Set operations for incoming
calls or PushTalk calls that do not notify caller ID.
• When "Disable settings" is set, the ring tone set in
each ring alert setting sounds.
• When setting "Call Rejection", incomings calls from
other parties are rejected.
• When setting "Ring alert off", ring alert does not
sound. Set an image in "Show image".
• When setting "Melody", select a melody and set an
image in "Show image".
• When setting "Movie ringtone", select a movie/imotion.
• When setting "Music", select a music data and set
an image in "Show image".
Setting Music➝P87
F905i_E2kou
F905i.book
Page 91
Monday, April 21, 2008
10:53 AM
Show image : Set an image for incoming calls that do
not notify caller ID.
• When "i-motion" is selected, select a movie/imotion from the movie list.
List images : When "Select image" is selected in Show
image, select the List images field and set an image.
Ring alert delay
Setting not to answer calls from the
party not saved in Phonebook
• This function cannot be set when Unregistered caller is
"ON".
me[Settings & NW
services]e15eSet the required
itemsep
Delayed ring alert : Specify if you enable Delayed ring
alert.
Delay time (sec) : Set the time between the arrival of
calls and the start of ringing. (1-99 seconds)
Missed call : Set whether to display a missed call which
ends in less than the time set in Delay time in
Received calls.
❖ When Delayed ring alert is set
When an incoming voice, videophone or PushTalk call is
received from a party not registered in Phonebook or such call
is received without caller ID notification, the reception is
notified only with screen display for the specified period of
time. After the set time has elapsed, normal ring alert action
starts.
• Before the specified time elapses, ordinary call receiving
operation such as answering an incoming call or replying it
with Answer machine can be performed.
• This function operates even for incoming call from the other
party saved in Phonebook in Personal data lock or Privacy
mode (when Phonebook & Logs is "Authorized access").
• This function operates also when there is an incoming call
from a party with secrecy in Phonebook in Privacy mode
(when Phonebook & Logs is "Hide set contact").
Unregistered caller
Rejecting calls from phone numbers
not saved
• Combination of Caller ID request service is recommended
when used.
• This function cannot be set in Personal data lock or when
Delayed ring alert of Ring alert delay is "ON".
me[Settings & NW
services]e552eAuthenticatee
1 or 2
❖ When Unregistered caller is set
The voice/videophone/PushTalk call from a caller who is not
saved in Phonebook is disconnected without activating ring
alert and the caller hears a busy tone.
• Rejected calls are recorded as missed calls.
• Reject calls from a party with secret attribute in Phonebook
in Privacy mode (when Phonebook & Logs is "Hide set
contact").
• Regardless of this setting, i-mode mail and SMS are
received.
Security Settings
91
F905i_E2kou
F905i.book
92
Page 92
Security Settings
Monday, April 21, 2008
10:53 AM
F905i_E2kou
F905i.book
Page 93
Monday, April 21, 2008
10:53 AM
Camera
Copyrights and portrait rights
The copyright laws prohibit unauthorized use of photographs or movies and site (program) or website information
obtained by using the terminal without the permission of the relevant copyright holders except for personal use.
Please refrain from unauthorized use of portraits or names of other persons that may infringe on portrait rights. When
releasing shot or recorded work on Internet websites, use with care not to infringe on copyrights or portrait rights.
Note that taking photos or recordings at some demonstrations, performances or exhibitions may be prohibited even
when only for personal use.
*Please be considerate of the privacy of individuals around you when taking and sending photos
using camera-equipped mobile phones.
93
F905i_E2kou
F905i.book
Page 94
Monday, April 21, 2008
10:53 AM
❖ Reading shooting screen
Before using camera
◆ Using camera
• Though the camera is manufactured using extremely
•
•
•
•
•
•
accurate technology, some pixels and lines may always be
displayed to be lighter or darker than you expect. Images
shot under very low light intensity contain increased noise
such as white lines, but it is not a malfunction.
If the terminal is left in a warm place or exposed to direct
sunlight for a long time, images to be shot may be
deteriorated.
When attempting to take a photo of a strong light source
such as the sun or a lamp, images may become dark or
degraded.
Depending on the characteristics of the lens, distorted
images may be displayed.
Shooting images under illumination flickering at high
frequency such as fluorescent lamp, mercury vapor lamp or
sodium vapor lamp may cause the screen to flicker or stripe
patterns to appear on the screen, which is called flicker
phenomena, giving different coloring for some shooting
timings. Flickers or stripes may be reduced by adjusting the
brightness for shooting.
Images shot with the camera may differ from actual
subjects in color and brightness, depending on conditions.
There is a small time lag between taking a picture and
pressing g or side key [▲]. Do not move the terminal for
a while after pressing g or side key [▲]. If you take a fast
moving subject, the image taken might slightly differ from
the subject displayed in the screen when pressing g or
side key [▲].
◆ Shooting procedure
Shooting with g*
Portrait recording
Landscape recording
* Shooting with side key [▲] is also available.
• More in-focus still camera➝P130
• Image shooting without blurring➝P141
• Rotating the display during shooting switches horizontal/
vertical mode of shot images.➝P139
• If no operations are performed for approximately 3 minutes
during shooting stand-by, camera ends.
94
Camera
bc
dfg
hij
k m o r t
l n p s u
Still image shooting screen
def
ghi
k m o s u
l n q t
Movie recording screen
a Shooting setting guidance
Press h to indicate that shooting settings are enabled.
b Full/standard screen operation guidance
Press * to indicate that switching full/standard screen
is enabled.
c Auto focus
Indicate ON/OFF of Auto focus
: Stand-by
(orange) : Adjusting focus
(green) : Focused
(red) : Unfocused
d Memory to save➝P136
e Recording type➝P136
f Light➝P138
g Macro shooting➝P138
h Auto timer➝P138
Compatible mode➝P138
F905i_E2kou
F905i.book
Page 95
Monday, April 21, 2008
10:53 AM
i Indicator (Stand-by)
Indicate the usage rate of the memory. Indicate the
remaining time before the shutter is released during
counting down of Auto timer.
• The microSD memory card usage rate may not become
0 even when no still image or movie has been shot.
Indicator (Recording movie/In pause)
Indicate the rate of the recorded image size to the file size
set in Size restrictions.
j Counter (Shooting still image)
Indicate the approximate maximum shooting number of
still images that can be saved in the memory currently set.
Indicate the remaining time before the shutter is released
during counting down of Auto timer. The total number of
shot still images and total number of still images to be shot
are indicated during continuous (Manual) shoot, 4 frames
(Manual) shoot and continuous panorama shoot.
Counter (Recording movie)
Indicate the approximate maximum recording time that can
be saved in the memory currently set. While recording,
indicate the elapsed time and remaining time
(approximate) of the file size specified by the Size
restrictions.
k Scene mode/effect➝P140
l Brightness➝P140
m White balance➝P140
n Frame➝P140
o Auto correction➝P141
p Skew correction➝P141
q Codec type➝P141
r Continuous shooting➝P132, 133
s Quality➝P141
t Size restriction➝P141
u Image size➝P142
Still camera
Shooting still images with Camera
MENU [LifeKit] 41
Various ways of shooting such as Auto focus,
Continuous shooting or frame shooting are available.
• Shooting method can be selected before shooting.➝P137
• The settings for shooting can be changed.➝P139
• Shutter sound is emitted even when "Silent" is set for
volume settings or in Silent mode.
• Maximum number of saved items➝P447
Focusing on with Auto focus : Point the camera at
the object and n
Auto focus is activated and the focus frame (orange)
and
(orange) are displayed on the screen. A
confirmation sound is heard when the camera is brought
into focus, and the frame changes to "+" (green), and
changes to
(green).
• The distance that you can focus on the object is 30
cm or longer. When you simultaneously use Macro
shooting, the distance is 8 to 40 cm.
• This function is unavailable when using In-camera or
when setting Scene mode/effect to to "Night scene".
• Press n again to cancel.
• When the camera is not brought into focus, the focus
frame changes to "+" (red) and
(red) may
appear. Cancel the focus and try again.
Switching in-camera and out-camera : t
Point the camera at the object and g or side
key [▲].
Camera
95
F905i_E2kou
F905i.book
Page 96
Monday, April 21, 2008
10:53 AM
Check the shot still image.
Adding to Phonebook entry (Only for when the size
is for the phonebook
(96× 72))me3e2 or 3e"Yes"
Saving immediately : Go to Step 4.
Recording again without saving : c
Changing the title : me41eChange the
title and p
• Up to 31 characters can be entered (Up to 30
characters for continuously shot images).
Switching view to actual size : t
Creating a mail with a still image attached : a
Setting as the stand-by display :
me31eSelect "Vertical view" or
"Horizontal view"e"Yes"
Adjusting brightness and color balance : p
Switching the normal display/mirror display (only
while shooting with the in-camera) :
me52
Saving as mirror image (only while shooting with
the in-camera) : me63
• When a setting frame image to a shot still image, the
still image cannot be saved as mirror image.
Switching the memory to save between the terminal
and microSD memory card : me9
Displaying the list of images saved :
me0e1 or 2
96
Camera
g or side key [▲]
Checking the saved still image : peSelect a still
image
Procedure for displaying sites➝P278 Step 2-3 in
"Displaying image"
• After checking, press c twice to return to the still
image shooting screen.
F905i_E2kou
F905i.book
Page 97
Monday, April 21, 2008
10:53 AM
✔INFORMATION
• In the cases below, Auto focus may be disabled :
•
•
- When shooting an object with no shading in color
- When shooting a moving object
- When shooting in a dark place
- When shooting while moving the terminal
- When there is light in the shooting area
When activating Auto focus, shooting function settings cannot
be changed.
Saving shot still images may take a long time depending on the
image size, quality or the destination to save.
◆ Shooting continuously 
Still images can be shot continuously. There are 4 types of
continuous shooting :
Continuous (Auto) : Shoot automatically and continuously
the specified number of images (up to 9 still images).
Continuous (Manual) : Shoot manually and continuously the
specified number of images (up to 9 still images).
4 frames (Auto) : Shoot automatically 4 frames and makes 1
still image.
4 frames (Manual) : Shoot manually 4 frames and makes 1
still image.
• Still images can be shot at interval of approximately 0.4
seconds in Continuous (Auto) or 4 frames (Auto).
• The number of images to be continuously shot can be set
in Continuous shot photos for Image settings.
• Continuous (Auto) and Continuous (Manual) are available
for Image sizes listed below.
- Sub-QCIF (128× 96)
- QCIF (176× 144)
- H-QVGA/V-QVGA(320× 240, 240× 320)
• 4 frames (Auto) is available when the Image size is HQVGA/V-QVGA (320× 240, 240× 320).
• 4 frames (Manual) is available when the Image size is any
one listed below.
- H-QVGA/V-QVGA(320× 240, 240× 320)
- H-VGA/V-VGA (640× 480, 480× 640)
- Horizontal/Vertical standby (864× 480, 480× 864)
uePlace the cursor on the icon of continuous
shooting using heSwitch the type of
continuous shooting using j and g.
The position of Continuous shooting icon➝P127
: Continuous (Auto)
: Continuous (Manual)
: 4 frames (Auto)
: 4 frames (Manual)
: Continuous shooting OFF (Shoot 1 image)
Point the camera at the object and g or side
key [▲].
Check the continuously shot still images.
Continuous shooting
4 frames
g or side key [▲]
Camera
97
F905i_E2kou
F905i.book
Page 98
Monday, April 21, 2008
10:53 AM
Saving only the displayed still image (during
shooting with the out-camera in Continuous
(Auto) or Continuous (Manual)) : g (1 sec. or
more)e"Yes"
Saving only the displayed still image after switching
normal/mirror (during shooting with the incamera in Continuous (Auto) or Continuous
(Manual)) : g (1 sec. or more)e"Save normal"
or "Save mirror"
◆ Making continuous panorama shooting

2-8 still images continuously shot changing the terminal
direction toward the object can be connected to form 1 still
image.
Selecting selected still images to be saved from still
images shot continuously (for thumbnail display
in Continuous (Auto) or Continuous (Manual)) :
a me62eSelect the still images to
save
Approximately one fifth area of the previously
shot image is transparently displayed on the
left or top of the shooting screen.
• Press a to zoom in the still image at the cursor
position. Press g or c to return to thumbnail
display.
b pe"Yes"
The selected still images are saved.
• When shooting with the in-camera, a confirmation
screen appears asking if you save the image as
normal or mirror.
Saving all still images shot continuously as mirror
images (during shooting with in-camera in
Continuous (Auto) or Continuous (Manual)) :
me63
ueme65
The continuous shooting icon changes from
to
Canceling : me66
• Press t to switch the direction of continuous
panorama shooting.
Point the camera at the object and g or side
key [▲].
Shift the terminal rightward or downward and perform
shooting.
If you press c, shooting is terminated and the shot
images are discarded.
Stitching : Shoot 2 or more images and p
• If the maximum number images are shot, they are
automatically stitched.
• If you shoot 1 image and press p, shooting is
terminated and the shot image is discarded.
• During continuous panorama shooting,
approximately one fifth area of the previously shot still
image is transparently displayed on the connection
side. Shoot the next image overlaying the transparent
area.
• When Auto save is "Yes", the shot still images are
automatically saved by pressing p after shooting 27 images.
98
Camera
Check the still image of continuous panorama
shooting.
F905i_E2kou
F905i.book
Page 99
Monday, April 21, 2008
10:53 AM
✔INFORMATION
• Images may not be connected smoothly depending on the
object or how to shoot.
• When microSD memory card is the memory to save, the image
is saved in "My Picture" folder of the microSD memory card.
• When there is an incoming call or the date and time specified in
Alarm clock or schedule has come during continuous panorama
shooting, the shooting stops and the shot still images up to that
point are discarded.
Switching view to actual size : t
• Press k to scroll the screen.
• Press any of c, m, t, p or a to cancel.
Auto scroll : p
g or side key [▲]
Movie camera
Recording movies with Camera
MENU [LifeKit] 42
Movies with sound can be recorded.
• Shooting method can be selected before shooting.➝P137
• The settings for shooting can be changed.➝P139
• A shutter sound is emitted even when volume setting is
"Silent" or in Silent mode.
• Maximum number of saved items➝P447
u (1 sec. or more)
Point the camera at the object and g or side
key [▲].
Switching in-camera and out-camera : t
• Press g to pause. The light is lit in green and
switches to
while in pause. Press g or side key
[▲] again to restart the recording.
Camera
99
F905i_E2kou
F905i.book
Page 100
Monday, April 21, 2008
p or side key [▲]
Check the recorded movie.
10:53 AM
• During in pause, pressing p ends the recording.
• The recorded movie can be played by pressing p.
Saving immediately : Go to Step 5.
Recording again without saving : c
Attaching recorded movie to mail : a
Setting as the stand-by display (Stand-by i-motion) :
me21e"Yes"
Adding to Phonebook entry : me2e2 or
3e"Yes"
Changing the title : me3eChange the title
and p
• Up to 31 characters can be entered
Switching the saving destination between the
terminal and microSD memory card : me5
Displaying the list of movies saved :
me6e1 or 2
g or side key [▲]
Checking the saved movie : peSelect the movie
to check
Procedure for displaying movie➝P284 Step 2-3 in
"Playing movie/i-motion"
• Press c twice to return to the movie recording
screen.
Image settings/Recording settings
Setting image size and saving method
of still images/movies
Shooting conditions such as image size, quality, type of
recording, size restriction and destination to save can be
set.
• This setting is not available when Still camera or Movie
camera is started from Phonebook, mail creation screen or
i-αppli.

Changing Image settings
ueme9
Set the required itemsep
Changing Recording settings : u (1 sec. or
more)eme8
Setting items➝P136 "Description of settings"
100
Camera
Setting shooting method before
shooting
Various ways of shooting such as Zoom, Auto timer,
Macro shooting and Light are available for camera of the
terminal.
• Shooting after setting➝P130 "Shooting still images with
Camera", 134 "Recording movies with Camera"
F905i_E2kou
F905i.book
Page 101
Monday, April 21, 2008
10:53 AM
◆ Switching Full screen mode and Standard
screen mode
On the movie recording screen, j.
The Full screen displays no icons or guide area and is
convenient for checking the object.
Slider
On the movie recording screen, *.
◆ Switching still image shooting and movie
recording
Each time you press the key, the slider scale shifts and
zooming factor changes.
During still image shooting
With out-camera, the range can be changed from
(Standard) to (Maximum zoom), and with in-camera,
the range can be changed from × 1 (Standard) and × 2.
On the shooting/recording screen, t (1 sec.
or more).
• You can also switch the camera by pressing
m01 on the still image shooting screen or
m91 on the movie shooting screen.
During movie recording
The values available are × 1 (Standard), × 2, × 4, × 6,
× 8, × 10, × 12, and × 16.
◆ Using Auto timer 
Since the shutter is automatically released after the specified
time elapses, you can take your own picture and avoid blurring
of images due to hand movement.
On the still image shooting screen,
me5e1-4
Canceling : me55
Point the camera at the object and g or side
key [▲].
Canceling : p
◆ Shooting nearby object 
You can focus on the subject approximately 8-10 cm away
from the camera.
• When Auto focus is used together, you can bring the
subject into focus from a distance of approx. 8-40 cm.
• Macro shooting is unavailable for shooting with the incamera.
On the movie recording screen, #.
Camera switches to Macro shooting and
appears.
Canceling : #
Camera
101
F905i_E2kou
F905i.book
Page 102
Monday, April 21, 2008
10:53 AM
❖ Setting shooting modes
◆ Displaying guide line
Side key [▲] on the still image shooting screen.
Guide line appears.
• Pressing side key [▼] switches Guide line ON/OFF.
• Guide line cannot be displayed when a frame is set
for the image.
Shooting modes can be applied to still images/movies being
shot according to the shooting conditions or your preference.
: Auto
: Portrait*1
: Landscape
: Night scene*1
: Backlight
: Sport
: Texts*1
: Monotone
: Sepia
: Monochrome sketch*1, 2, 3
: Colored sketch*1, 2, 4
❖ Adjusting brightness
Guide line display
Changing setting for shooting
Settings of Scene mode/effect, Brightness, White
balance, Frames, Auto correction, Skew correction,
Codec type, Quality, Size restrictions, Image size and
Adjust flicker can be changed.
• When "Voice only" is set in Recording Type for recording
movies, the settings except Quality and Size restrictions
cannot be changed.
◆ Setting using icons on display
You can change settings for shooting by placing the cursor on
an icon at the bottom of the shooting screen.

Setting Frames
On the shooting/recording screen, hePlace
the cursor on the frame icon
• During shooting stand-by, you can also press 4 to
select the frame icon.
j to switch the frame.
Frame name
Icon of frame
Canceling : 4 (1 sec. or more)
• When adjusting the cursor to the mark of the frame,
select "No frame" to cancel.
102
Camera
Adjust brightness of still images or movies to be shot in 5
levels : -2 to +2.
F905i_E2kou
F905i.book
Page 103
Monday, April 21, 2008
10:53 AM
❖ Adjusting white balance
❖ Reducing camera shake
When shooting under natural and/or artificial light, a color tone
matching the atmosphere can be adjusted.
: Auto
: Sunlight
: Cloudy
: Fluorescent light
: Bulb light
Blurring that is easily caused by handheld shooting can be
corrected.
Auto : Correct the blurring.
OFF : Cancel the setting.
✔INFORMATION
• In the cases below, the setting becomes OFF.
✔INFORMATION
• This adjustment can be set only for "Auto" set for Scene mode/
effect.
❖ Shooting with frame added
Frames saved in the terminal or downloaded from sites can be
added for shooting.
: Frame
: No frame
• The frames saved in the terminal by default are applicable
to image sizes QCIF (176× 144), H-QVGA (320× 240), VQVGA (240× 320) and Horizontal standby (864× 480) and
Vertical standby (480× 864).
• Frame is available when the Image size of the image is as
below.
During still image shooting
- Sub-QCIF (128× 96)
- QCIF (176× 144)
- H-QVGA/V-QVGA(320× 240, 240× 320)
- H-VGA/V-VGA (640× 480, 480× 640)
- Horizontal/Vertical standby (864× 480, 480× 864)
During movie recording
- QCIF (176× 144)
•
- For Continuous(Auto)/(Manual)
- For 4 frames (Auto)/(Manual)
- For Panorama
- Shooting with in-camera
- When Still camera is started from i-αppli
Auto correction function cannot completely correct camera
shake. The effect depends on the object and/or shooting
conditions. It may become less effective for excessive camera
shake or object movement.
❖ Correct skew
For Still camera, correct skew of images for the characters to
be read more easily.
Typed letter : Decrease distortion when shooting printed
materials such as books or magazines.
Hand writing : Decrease distortion when shooting handwritten materials.
OFF : Cancel the setting.
✔INFORMATION
• In the cases below, the setting becomes OFF.
•
- For Continuous(Auto)/(Manual)
- For 4 frames (Auto)/(Manual)
- For Panorama
- Shooting with in-camera
- When Still camera is started from i-αppli
Skew correction function cannot completely correct camera
skew. The effect depends on the object and/or shooting
conditions. Some still images may be more natural if not
adjusted.
❖ Setting Codec type
Set the encoding method for Movie camera.
: STD (MPEG4)
: HQ (H.264)
Camera
103
F905i_E2kou
F905i.book
Page 104
Monday, April 21, 2008
10:53 AM
❖ Setting quality of still image/movie
During still image shooting
: Fine
: Standard
: Economy
During movie recording
: XQ (Extra high)
: HQ (High quality)
: STD (Standard)
: LP (Long play)
❖ Restricting file size
During still image shooting
None : No restriction for file size.
Msg attach:Large : Restrict file size to 2 Mbytes. Attach
to i-mode mail without changing file size.
Msg attach:Small : Restrict file size to 90 Kbytes. This
file size is suited for being attached to i-mode mail.
During movie recording
None : No restriction for file size.
Msg attach:Large : Restrict file size to 2 Mbytes. A movie
of this file size can be sent to terminals which supports
large capacity mail.
Msg attach:Small : Restrict file size to 500 Kbytes. A
movie of this file size can be sent to terminals which does
not support large capacity mail by attaching to i-mode mail.
◆ Restoring default shooting/recording
settings
• Store up to 5 scanned data.
• Bar code reader can be used only with the out-camera.
• QR code may not be scanned depending on the version
(type and size).
• NW7 and CODE39 codes have a large width and may be
unfocused and fail in recognition when trying to display the
entire code on the screen. Such code is easily recognized
when Auto focus is used or the terminal is brought close to
the center of the code until it is focused.
• Scratches, dirt, damages, low print quality and the strong
reflection of light may disable code reading.
• Activate Bar code reader from the character entry screen
and enter the scanned data directly.➝P366
❖ JAN code
❖ QR code
❖ NW7 code
• The settings of Scene mode/effect, Brightness, White
balance and Adjust flicker are reset to the default settings.
On the shooting screen,
me24e"Yes"
❖ CODE39 code
Sending still image shot during call
When shooting a still image during a voice call, you can
attach it to i-mode mail and then send it to the party you
are talking with.
During a call, me9eShoot a still image
ae"Yes"
Edit the i-mode mailep
Bar code reader
Using Bar code reader
Data such as text and number contained in JAN, QR, NW7
or CODE39 code can be read using the camera. The
scanned data can be added to Phonebook or Bookmark
or used for Phone To (AV Phone To), Mail To, SMS To and
Web To functions.
104
Camera
F905i_E2kou
F905i.book
Page 105
Monday, April 21, 2008
10:53 AM
◆ Scanning code
Scan the code automatically. A confirmation sound is
played when scanning is complete and the scanned
data appears.
Bar Code Reader key (1 sec. or more)
After Bar code reader starts, camera automatically
switches to Macro shooting. Zoom automatically sets
ON and
appears indicating that the bar code is being
read.
Place the out-camera approximately 6-11 cm away from
the code to scan.
Approx.
6-11cm
Adjust the OUT camera to the code.
Rescanning code : p
me4
• During Bar code reader stand-by, the operations are
enabled :
u : Zoom ON d : Zoom OFF
a : Switching of Light ON ( ) and Light OFF
# : Switch Macro OFF (no icon) and Macro ON
( ).
n : Switching Auto focus
• Depending on the conditions, the auto focus icon
changes as shown below.
No icon : Auto focus OFF
(black) : Adjusting focus
(green) : Focused
(red) : Unfocused
• Switch to Macro OFF before scanning large size
codes. The readability of code may be raised by
setting zoom OFF.
Switching to normal still image shooting or movie
recording : me4e1 or 2
• When Bar code reader has not been started from
Camera or the stand-by display, the switching is
unavailable.
The scanned data is saved.
• When 5 data items have already been saved or the
memory for data is not enough, a confirmation screen
of deleting saved data appears.
Copying text information in scanned data :
me1eSelect a copying area
Copy/Paste information➝P367
✔INFORMATION
• During Bar code reader stand-by, the icon changes to
• If the code is hard to read, it may be read by adjusting the
•
distance between the code and out-camera, the angle or
direction of the out-camera, etc.
With Call alert volume and Mail/Msg alert vol. in Adjust volume
are both "Silent" or in Silent mode, no confirmation sound is
emitted when reading code.
Camera
105
F905i_E2kou
F905i.book
Page 106
Monday, April 21, 2008
10:53 AM
❖ Scanning divided QR codes
When one data item is divided into multiple (up to 16) QR
codes, scan them one by one following the instructions on the
display.
aving URL as bookmark :
a Place the cursor on the URL and
me33
• Select "Add bookmark" to save.
b Select a folder where the bookmark is saved.
The next procedure➝P153 Step 2 in "Recording in
Bookmark"
• When "Add bookmark" is selected, the site name
is entered for the title.
Starting i-αppli : "Start i-αppli".
Indicates the remaining number
of QR codes to be scanned and
total number of QR codes.
Making a voice or videophone call : Select a phone
numbereSelect from Call type field of Call
optioneme"Yes"
Making a call under set conditions➝P51
The number of squares displayed is the same as that of
QR codes. The squares already scanned are displayed in
blue, those not yet scanned in gray and the one scanned
the last in green.
Sending SMS : Select a phone numbereSelect
SMS from Call type field of Call
optioneme"Yes"eCreate and send SMS
• Press c and select "Yes" to cancel scanning.
◆ Using scanned data after saving

Adding data to the terminal phonebook or
UIM phonebook
me[LifeKit]e1epeSelect the
scanned data to use
Deleting scanned data : Place the cursor on the
scanned datame31e"Yes"
• To delete all scanned data, press m32,
perform authentication, and select "Yes".
Place the cursor on the data to add to
Phonebook and me3e1 or
2e1 or 2
The phonebook data entry screen appears with the
selected data entered.
Adding all data to Phonebook at a time : "Add to
phonebook"e1 or 2
The phonebook data entry screen appears with name,
reading, phone number, mail address, birthday,
notepad, postal code/address and URL entered.
Sending i-mode mail : Select a mail address or
"Compose message".
The mail creation screen with the mail address entered
appears.
• Mail address, subject and text are already entered
when "Compose message" is selected.
106
Camera
Saving a still image file : Select a still image
filee"Save"
The next procedure➝P157 Step 2 and the following
steps in "Downloading images"
• However, select the destination to save from either
folder of "Deco-mail picture" or "Data transfer" of My
Picture.
• Selecting "Display" displays the still image file.
Saving melody data : Select a melody datae"Save"
The next procedure➝P157 Step 3 in "Downloading
melodies"
• Note that the destination to save is "Data transfer"
folder of Melody.
• Selecting "Play" plays the melody data.
F905i_E2kou
F905i.book
Page 107
Monday, April 21, 2008
10:53 AM
i-mode/i-motion
107
F905i_E2kou
F905i.book
Page 108
Monday, April 21, 2008
10:53 AM
Displaying sites
i-mode
With i-mode, you can use online services such as site
(Program), Internet or i-mode mail by way of the display
of i-mode compatible terminal (hereinafter called as imode terminal).
Displaying sites
MENU [i-mode] 1
You can connect to i-mode to view various sites.
de 1
"English iMenu"e"Menu List"
Scroll bar
・The current position relative
to the whole display appears
temporarily by pressing and
holding j for 1 second or
more when reading a page
is completed or all lines are
not displayed during a page
appearing.
• pwhile downloading a page : Stopping
downloading a page.
Select an item to view.
When you quit viewing a site, fe"Yes"
◆ Connecting to SSL page
Sites compatible with SSL (SSL page) can be displayed.
• Some SSL pages may not allow connection when date and
time have not been set.
• Establishment of SSL sessions may require electronic
information called "Certificate" for the connected site and
the terminal issued by the same certification
organization.➝P162
• To connect to FirstPass compatible site, you need to
download a user certificate for the site from the FirstPass
center and save it on UIM.
Displaying indication screen of the start of SSL
session.
appears at the top of the display.
Displaying certificate while SSL page is displayed :
me92
• When proceeding from an SSL page to an ordinary
page, a confirmation screen appears. Select "Yes" to
display the ordinary page,
disappears from the top
of the display.
◆ Reconnecting to the page displayed before

MENU [i-mode] 4
The URL of the site or website displayed before is recorded in
the terminal. Using Browser history allows you to reconnect
quickly to the page displayed before.
108
i-mode/i-motion
F905i_E2kou
F905i.book
Page 109
Monday, April 21, 2008
10:53 AM
• Up to 10 URLs are stored in Browser history of each of imode and Full Browser. When exceeding the limit, record
is overwritten chronologically.
Reading and operating sites
de 4
Select URL.
Deleting data : Place the cursor on the URL and
me41e"Yes"
Deleting selected data : me42eSelect
URLsepe"Yes"
Deleting all data :
me43eAuthenticatee"Yes"
i-mode/i-motion
109
F905i_E2kou
F905i.book
Page 110
Monday, April 21, 2008
10:53 AM
◆ Displaying next or previous pages
◆ Scrolling screen
The terminal records the display history of up to 20 pages. A
storage area in the terminal that temporarily stores the display
history of pages is called "Cache" and the recorded pages in
the cache can be displayed by pressing h without making
communications.
• When the terminal cache size has been exceeded or when
displaying a page which has been set by the site to forcibly
read the latest information, communications are started.
• You can scroll the screen up and down by pressing j.
Hold down to scroll continuously.
When all lines are not displayed
or the cursor can be moved to a
link item, ▲ or ▼ appears in
the guide area.
Scroll the page by screen.
Hold down the key to scroll
continuously by screen.
Indicate you can proceed to
the next pages already
displayed.
Indicate you can return to
the previous pages already
displayed.
◆ Reloading information
During site display, me5
◆ Displaying URL
During site display, me91
◆ Switching Scroll bar display
During site display, me98
• You can switch displaying/hiding the Scroll bar each
time you press m98.
Go to location
Displaying websites
MENU [i-mode] 51
You can connect to the Internet and access i-mode
compatible websites. Specify websites by entering the
address (URL) to connect to.
de51
Enter a URLep
• In alphabet input mode, repeatedly press 1 to
enter " . ", " / ", " - ", etc. and * to enter
"@imode.net.tw", ".com", ".com.tw", ".net.tw",
".edu.tw", ".org.tw", ".gov.tw", "http://www.", "https://
www.", "www.", ".asp", ".html", ".htm" or ".php".
◆ Displaying pages using Entry URL log

MENU [i-mode] 52
• Up to 20 URLs are stored in the Entry URL log of each of imode and Full Browser. When exceeding the limit, record
is overwritten chronologically.
110
i-mode/i-motion
de52
Select the URL of website
F905i_E2kou
F905i.book
Page 111
Monday, April 21, 2008
10:53 AM
Deleting a URL : Place the cursor on the URL and
me41e"Yes"
Bookmark
Recording websites and sites for
quick browsing
Deleting selected URLs : me42eSelect
URLsepe"Yes"
Deleting all URLs :
me43eAuthenticatee"Yes"
Display the site or
websiteeme21eSelect a folder to
add to
While the site or website is displayed,
me961
Enter a title nameep
• The character encode is switched each time
◆ Displaying site or website from Bookmark
◆ Displaying characters correctly 
◆ Recording in Bookmark
m961 is pressed in the order below :
Auto switch ➝ SJIS ➝ EUC ➝ JIS ➝ UTF8. Press
m962 to switch to "Auto switch".
• When displaying a site or website, "Auto switch" is
set.
MENU [i-mode] 2
de2eSelect a folder
• Icon definitions :
: No bookmark
: Bookmark exists
: No bookmark (Secrecy ON)
: Bookmark exists (Secrecy ON)
Select a bookmark.
The meaning of the icon➝P154 Step 3 in "Saving
bookmarks in Access shortcuts"
◆ Creating/deleting folders
• You can set secret attribute to a created folder. In Privacy
•
•
•
•
mode (when Bookmark is "Hide secrecy fldrs"), folders with
Secrecy set to "ON" are not displayed.
Up to 20 folders can be created for each of i-mode and Full
Browser.
Preinstalled "Folder 1" folder cannot be deleted.
In Privacy mode (when Bookmark is "Hide secrecy fldrs"),
the secrecy cannot be set and folders with secrecy cannot
be operated.
Setting Privacy mode➝P114

Create
de2
me1
Changing folder setting : Place the cursor on the
folder and me3
Changing the order of the folder : Place the cursor
on the folder and me7 or 8
Deleting : Place the cursor on the folder and
me2eAuthenticatee"Yes"
Set the required itemsep
Secrecy: Set if you display a folder in Privacy mode
(when Bookmark is "Hide secrecy fldrs").
i-mode/i-motion
111
F905i_E2kou
F905i.book
Page 112
Monday, April 21, 2008
10:53 AM
◆ Connecting to sites or websites using
simple key sequence 
When recording a bookmark as access shortcut, you can
quickly display the site or website from the stand-by display.
❖ Saving bookmarks in Access shortcuts
• You can record 1 bookmark for each key of the keypad, up
to 10 bookmarks in total for i-mode and Full Browser.
• Bookmark in a folder that Secrecy is "ON" cannot be saved.
de2eSelect a folder
Place the cursor on the bookmark to record and
a.
Canceling : Place the cursor on the bookmark and
me2
Select a destination to save.
• On the bookmark list, the icon for the recorded
bookmark switches from
to
❖ Displaying site or website using Access
shortcuts
0-9ed
❖ Operating from Access shortcuts list
MENU [i-mode] 81

Saving shortcut
de61
Place the cursor on Not recorded and g.
Displaying sites : Select a bookmark.
Canceling : Place the cursor on the bookmark and
me2e"Yes"
"i-mode" or "Full Browser"eSelect a
foldereSelect a bookmark to record
For the bookmark of Full Browser recorded as access
shortcut,
appears on the access shortcut list.
112
i-mode/i-motion
F905i_E2kou
F905i.book
Page 113
Monday, April 21, 2008
10:53 AM
◆ Deleting bookmark
de 2
• The maximum size of screen memo file that can be saved
Select a folder.
Deleting all bookmarks :
me4eAuthenticateeGo to Step 4
is 100 Kbytes.
Place the cursor on a bookmark and
me31
Deleting selected bookmarks :
me32eSelect bookmarksep
Deleting all the bookmarks in the folder :
me33eAuthenticate
◆ Saving screen memo
"Yes"
MENU [i-mode] 3
de3eSelect a screen memo
• Icons used for the screen memo list are defined as
follows :
: Ordinary screen memo
: Protected screen memo
• The bar indicating the usage rate of the memory
appears on the screen memo list.
• Operation of the screen memo display is the same as
during site display except for a part.
de2eSelect a folder
◆ Protecting screen memo
Moving all in the folder : me53
By protecting, they can be prevented from being erroneously
erased or being overwritten because of the lack of the memory
space.
• Maximum number of protected items➝P447
Select a folder to move the bookmark to.

Moving selected bookmarks :
me52eSelect bookmarksep
• If you register the screen memo without entering a
◆ Displaying screen memo
You can move saved bookmarks to another folder.
• Bookmarks can be copied to microSD memory
card.➝P294
Place the cursor on a bookmark and
me51
Enter a title nameep
title,
"無主旨" appears in the screen memo list.
◆ Moving bookmark
Display a siteeme31
• If you try to move a shortcut-saved bookmark to a
folder with Secrecy set to "ON", a confirmation screen
for canceling Access shortcuts appears.
Protecting one entry
de3
Place the cursor on the screen memo and
me11
◆ Sorting bookmarks 
• The icons of the protected screen memo changes
The bookmark list can be sorted temporarily. When the list
display is closed, sorting is restored to "By access date".
• You can sort all folders.
Protecting selected screen memos :
me12eSelect screen memosep
from
Unprotecting selected items :
me14eSelect screen memosep
Unprotecting all screen memos : me15
de2eSelect a folderePlace the cursor
on the bookmark and me9
Unprotecting one entry : Place the cursor on a
screen memo and me13
de2eSelect a
foldereme6e1-4
◆ Attaching bookmark data to an i-mode mail
to
◆ Deleting screen memo
The next procedure➝P170

Screen memo
Saving site contents
Site screens in a display can be saved as screen memo.
Deleting one entry
de3
Place the cursor on the screen memo and
me21
Deleting selected screen memos :
me22eSelect screen memosep
i-mode/i-motion
113
F905i_E2kou
F905i.book
Page 114
Monday, April 21, 2008
10:53 AM
Deleting all screen memos at a time :
me23eAuthenticate
"Yes"
◆ Sorting screen memo 
The screen memo list can be sorted temporarily. When the list
display is closed, sorting is restored to "By date".
◆ Copying URL

Downloading various data (files) from
sites
You can download data (files) from sites and store them
in the terminal.
• The data (file) and the maximum size of each data that can
be saved are as shown below.
- Image : 100 Kbytes
- Melody : 100 Kbytes
- Chara-den : 100 Kbytes
- Kisekae Tool : 2 Mbytes
• You can stop downloading by pressing g or p (the key
to press varies by the file format).
• However, some data (files) may not be displayed, played or
set correctly.
• Maximum number of saved items➝P447
• When the maximum number of saved items/area is
reached (data in Data Box)➝P306
To save data (files) except those in Data Box, delete data
(files) stored in the terminal or microSD memory card.
• Some data (files) can be saved to microSD memory card.
Display URL of a siteeme1
Displaying URL➝P151
Select a copying area.
Copying/Pasting method➝P367
de3eme8e1-3
Downloading data such as images and melodies from sites
Copying URL of a site
◆ Attaching URL to i-mode mail
You can send i-mode mail with attaching URL or website from
the currently displayed site.
Display a siteeme7
The next procedure➝P170
◆ Adding phone number and mail address
into phonebook 

Saving new phone number displayed on
the site screen
Display a site.
Place the cursor on the phone number and
me81e1 or 2
Adding to existing phonebook entry : Place the
cursor on a phone number and
me82e1 or 2eSelect
phonebook entry
Save the name or mail address, etc.
Phonebook new entry➝P75, 76
◆ Adding URL in phonebook

Adding data from the bookmark list
de2eSelect a folder
Place the cursor on a bookmark and
me71
Adding to existing phonebook entry : Place the
cursor on the bookmark and
me72eSelect phonebook entry
Save the name or mail address, etc.
Phonebook new entry➝P75
Making i-mode settings
i-mode settings
Making i-mode settings
• The settings below are also effective for Full Browser :
- Connection timeout
- Display light
- Manage certificate
114
i-mode/i-motion
F905i_E2kou
F905i.book
Page 115
Monday, April 21, 2008
10:53 AM
◆ Setting Display light
- Skip password
◆ Setting connection time out 
MENU [i-mode] 82
Set the timeout for connection with the i-mode Center. If
connection is not normally established, it is automatically
interrupted after the set period of time.
de62e1-3
MENU [i-mode] 83
Set the display light to be used to display the sites or screen
memos or MessageR/F or i-Channel.
de63e1 or 2
• If you set "Terminal setting", the settings of Display
light of Display is used.
◆ Setting image display and sound effect

MENU [i-mode] 86
You can set an image or Flash graphics sound effect to be
used when displaying a site, screen memo, etc.
de65eSet the required itemsep
Image : Set if you display images.
• When "Not display" is set,
appears instead of
image, Flash graphics or GIF animation.
• When "Display" is set, Animation and Use phone
information can be set.
Animation : Set if you display GIF animation.
• When "Not display" is set, the first image of the GIF
animation appears.
Use phone information : Set if you use data saved in
the terminal for displaying Flash graphics.
Sound effect setting : Set if you play the sound effect
of Flash graphics or data broadcasting, data
broadcasting site.
Using Certificate
Operating certificate
(TBD)
Using i-motion
i-motion
Movie and sound can be downloaded from sites or
websites and played/saved. Saved movie and sound can
be played as i-motion and be set for Movie ringtone. The
vocals of singers can be used for a ring alert as well as
melodies (some i-motion may not be set for Movie
ringtone).
• i-motion items can be categorized to 2 types listed below.
The data types cannot be changed or selected when
downloading.
Type
Playing action
Normal type (can Play while downloading i-motion data (Up
to 10 Mbytes). After completion of
be saved*)
receiving, the i-motion can be operated in
the same way as i-motions playable after
downloading all data.
Play after downloading all i-motion data (Up
to 10 Mbytes).
i-mode/i-motion
115
F905i_E2kou
F905i.book
Page 116
Monday, April 21, 2008
Type
10:53 AM
• For streaming type i-motion, if you select "Back", the
Playing action
Streaming type
Play while downloading i-motion data (Up
(cannot be saved) to 10 Mbytes). Deleting i-motion data after
playing.
* Some i-motion may not allow saving.
site screen reappears.
The downloaded i-motion is saved in "i-mode" folder of
i-motion.
• When "
" appears in the guide area, pressing
t and p saves data without file restriction to
"Movie" folder (saves i-motion with sound only to
"Other movie" folder) of microSD memory card. After
pressing p, place the cursor on the destination
folder of microSD memory card and press p to
save data with file restriction to the selected folder.
• When saving in the terminal, pressing m displays
the usage list of the i-motions, and the i-motion can be
set for the stand-by display, etc.➝P286
Downloading i-motion from sites
• Maximum number of items that can be saved➝P447
Display a siteeSelect an i-motion
The amount of data received/
total amount of data
Downloading starts, and when completed, completion
message appears.
• During downloading, press p and select "Yes" to
stop downloading.
For i-motion with file size of 500 Kbytes to 10 Mbytes
that can be saved partially, resuming confirmation
screen appears. If you select "Yes", downloading is
resumed, and if you select "No", partial saving
confirmation screen appears. The rest of partially
saved i-motion can be downloaded.➝P285
INFORMATION in "Playing movie/i-motion"
• When a streaming type i-motion is selected, playing
confirmation screen appears.
• The operations below can be performed while playing
i-motion playable while being downloaded. After
completion of playing, the i-motion can be operated in
the same way as i-motions playable after
downloading all data.
g : Pause/Play (Normal type)
j/Side keys [▲▼] : Adjust volume
p : Streaming type is interrupted by selecting "Yes"
on the confirmation screen, and Normal type is
stopped (Pressing g while stopped plays the imotion from the beginning)
m : Display detail information
* Even when pausing or stopping the play, the data
download continues.
• Key operations (except c) for playing back imotion playable after downloading all data➝P284
Step 3 in "Playing movie/i-motion"
"Save"
• i-motion of streaming type cannot be saved.
Replaying : "Play"
Displaying detail information : "File property"
Stopping saving : "Back"e"No"
116
i-mode/i-motion
Enter a display nameep
✔INFORMATION
• Only i-motion files in MP4 (Mobile MP4) format can be
•
•
•
•
•
•
•
•
downloaded and/or played. Downloading or playing of i-motion
files in ASF format is disabled.
Even if ticker (text) is included in i-motion, the text cannot be
played.
The replay restrictions such as number of playable times or
expiration of playing may be set for i-motion files.
When i-motion is played while the data is being downloaded,
play may be temporarily stopped in waiting for data reception.
The playing is automatically resumed when data reception
starts.
When i-motion is played while the data is being downloaded, it
may become unable to play, or image may be blurred
depending on the condition such as signal quality. i-motion can
be played after the download if the data is normally received.
However, some i-motion may allow download of data but may
not be played correctly.
When i-motion data is improper, reception of i-motion may be
canceled.
Even when Ring alert or Receive display appears as "Available"
in detail information displayed before saving i-motion used from
i-αppli, saving of it may be disabled. The i-motion cannot be set
as Ring alert or Movie alert.
When playing streaming type i-motion while the data is being
downloaded, if you fold the terminal or a call comes in or the set
date/time of the recording timer reception of 1Seg, alarm clock
or schedule comes, downloading is interrupted and the playing
is stopped. When playing normal type i-motion while the data is
being downloaded, if you fold the terminal, the playing is
stopped but downloading continues.
When the maximum number of saved items/area is reached
➝P306
F905i_E2kou
F905i.book
Page 117
Monday, April 21, 2008
10:53 AM
i-motion settings
Setting Auto play of i-motion
MENU [i-mode] 87
Set if you automatically play normal type i-motion while
or after downloading.
de66eSelect Auto replay setting
fielde1 or 2ep
✔INFORMATION
• Press m and select "Display" ➝ "i-motion settings" to operate
from the site screen.
• Even when "Auto Play OFF" is set, i-motion can be played by
selecting "Play" on the download completion screen.
• For streaming type i-motion, replaying confirmation screen
appears regardless of this setting.
i-mode/i-motion
117
F905i_E2kou
F905i.book
118
Page 118
i-mode/i-motion
Monday, April 21, 2008
10:53 AM
F905i_E2kou
F905i.book
Page 119
Monday, April 21, 2008
10:53 AM
Mail
119
F905i_E2kou
F905i.book
Page 120
Monday, April 21, 2008
10:53 AM
Using SMS
Creating and sending SMS
Creating and sending SMS
Send a character message to a mobile phone number as
the destination.
• Maximum number of saved items➝P447
• Reading received/sent/unsent SMS list/detail view screen
➝P185
✔INFORMATION
• If, in the SMS setting, the sending character type is set to
Creating/sending by entering address
directly
a (one second or more) Select the receiver
"Direct input"eEnter the address
field
Entering mail address from Mail logs : Select "Sent
msg log" or "Received msg log"eSelect a log
Entering by searching phonebook : "View
phonebook"eSearch the phonebookeSelect a
phonebook entry
•
•
•
Select the Message text fieldeEnter the
message text
• When "Chinese" is set for Font type in SMS settings,
up to 670 characters can be entered. When "English"
is set, up to 1530 characters including one-byte
alphanumerics and symbols (except for ｀ 。 「」、・
゛ ゜ ) can be entered.
• Press # to enter line feed (except one-/two-byte
number input mode). A line feed is counted as a
character of message text. The line feed may be
replaced by a space on the other party's terminal.
Inserting signature : me46
•
•
•
•
•
•
120
Mail
• To save SMS without sending it, press m2. The
SMS is saved of "Unsent" folder of Unsent messages.
MENU [Mail] 811

"Chinese" and characters entered are 70 characters or less it
will be sent as one SMS. If characters entered are more than 70
characters you can send it as a maximum of 10 combined
SMSes containing 67 characters per message. If the sending
character type is "English" and characters entered are 160
characters or less it will be sent as one SMS. If the characters
entered are more than 160 characters you can send it as a
maximum of 10 combined SMSes that contain 153 characters
per message.
When transmission is completed correctly, the SMS is saved in
a folder of Outbox. When the memory is not enough or the
maximum number of saved items is reached, the unprotected
sent mails are overwritten chronologically.
Depending on the signal quality, font type or the terminal of the
other party, characters may not be displayed correctly at the
receiver side.
The type of font and whether to receive SMS report request are
set in SMS settings beforehand. You can also change the
settings of SMS report request and Keep in SMS center after
starting creation of SMS.
When Font type is English and symbols (| ^ { } ~ ¥) are entered,
the number of characters that can be sent is reduced.
Moreover, symbol (-) can be entered and sent, but it is replaced
with a space on the receiver's terminal.
When transmission fails, an error message appears and the
SMS is saved in "Unsent" folder of Unsent messages.
If setting SMS report request to "Request" and send SMS, you
receive SMS report request that notifies you that the other
terminal received the SMS. SMS report request is saved in the
folder in Inbox.
Even if Activate/Deactivate of caller ID notification is "Not
notify", caller ID is sent to the receiver when SMS is sent.
When the memory is not enough or the maximum number of
saved items is reached, SMS cannot be created. Delete
unnecessary i-mode mail and/or SMS from the folder in Unsent
messages.
With the 2in1 service activated, you cannot send SMS for
Number B.
F905i_E2kou
F905i.book
Page 121
Monday, April 21, 2008
10:53 AM
• To stop transmission, press g on the connecting
i-mode mail
Only by subscribing to i-mode, i-mode mails can be
exchanged not only with i-mode terminals but also via
Internet.
In addition to message text, you can attach up to 10 files
(images, etc.) of up to 2 Mbytes in total to a mail.
Moreover, Deco-mail is available, a font color, size and
background color of message text can be changed, and
many Deco-mail pictograms that can be inserted similarly
to pictograms are preinstalled, allowing you to easily
create and send expressive mails.
screen or press p on the sending screen. Note that
the i-mode mail may be sent depending on the
operation timing. The sent mail is saved in "Unsent"
folder of Unsent messages.
Creating i-mode mail/Deco-mail
Compose message
Creating and sending i-mode mail
A2
MENU [Mail] 2
me1e3
Receiver field
Subject field
Attachment field
Message text field
Total bytes of characters
and decoration
Mail creation screen
Select the receiver field.
Select the message text fieldeEnter the
message text
Select entry methodeEnter the address
Select the subject fieldeEnter the subject
• Up to 200 bytes can be entered.
The remaining number of
characters that can be
entered as the text (bytes)
• Up to 10,000 bytes can be entered.
Inserting signature : me57
Mail
121
F905i_E2kou
F905i.book
Page 122
Monday, April 21, 2008
10:53 AM
✔INFORMATION
• When transmission is complete correctly, the i-mode mail is
•
•
•
•
•
•
•
•
saved in a folder of Outbox. When the memory is not enough or
the maximum number of saved items is reached, the
unprotected sent mails are overwritten chronologically.
When Deco-mail pictogram (Pictogram D) is used, the mail is
sent as Deco-mail.
When i-mode mail containing pictograms is sent to a non-imode terminal, the pictograms are automatically converted to
similar pictograms on the receiver's terminal. Note that, the
pictograms may not be displayed correctly on the receiver's
terminal depending on the models and/or functions of the
receiver's terminals and they may be converted to 000 if there
are no applicable pictograms.
Depending on the signal quality, characters may not be
displayed correctly at the receiver side.
Even when i-mode mail is sent correctly, an error message
"Transmission failed." may appear depending on the signal
quality.
When transmission fails, an error message appears and the imode mail is saved in "Unsent" folder of Unsent messages.
Error messages for address unknown, etc. may not be received
when mails are sent to addresses except DoCoMo.
When the memory is not enough or the maximum number of
saved items is reached, i-mode mail cannot be created or send.
Delete unnecessary i-mode mail and/or SMS from the folder in
Unsent messages.
When a mail exceeding 10,000 bytes in process of creation is
automatically saved due to other functions being started, etc.,
some part of it may not be saved.
◆ Adding address 
i-mode mail can be sent to up to 5 addresses at the same time
(Simultaneous sending).
• There are 3 address types of receivers as below.
: Main receiver
: Other receiver(s) than the main receiver to inform the
contents of the mail
: The receiver(s) to inform the contents of the mail
without making the mail address displayed on other
receivers' terminals
• When no receiver addresses are entered in , the mail
cannot be sent.
On the mail creation screen, place the cursor on
the receiver field and aeSelect the entry
method
• When selecting "Mail group", go to Step 3.
Changing address type : On the mail creation
screen, place the cursor on the address and
me9eSelect the address type
Deleting the added address : Place the cursor on the
address on the mail creation screen and
me8e"Yes"
122
Mail
Select Address type.
Enter the address.
Deco-mail
Creating and sending Deco-mail
You can create i-mode mail by changing the text font size
or background color, or inserting a still image shot, Decomail picture or Deco-mail pictograms preinstalled by
default (Deco-mail).
■ Decoration example
Blinking
Font color/Font size
Insert line
Ticker
Word alignment/Insert
image/Swing
Background color
• Deco-mail of 100 Kbytes or less in size can be sent. Up to
20 types of up to 90 Kbytes in total can be attached to
message text of 100 Kbytes.
• If Deco-mail exceeding 10,000 bytes is sent to a Deco-mail
compatible i-mode terminal of a model except those* listed
below, it is received by the receiver's terminal as a mail
containing URL for viewing.
• When Deco-mail is sent to a Deco-mail incompatible imode terminal, mail containing URL is received by the
receiver's terminal. For Deco-mail exceeding 10,000 bytes
in size, terminals of some incompatible models may receive
only the text, but cannot receive viewing URLs.
✔INFORMATION
• This terminal supports Deco-mail, but if the receiver’s terminal
is not Deco-mail compatible, it is displayed differently at the
receiver’s terminal.
F905i_E2kou
F905i.book
Page 123
Monday, April 21, 2008
10:53 AM
◆ Entering characters after specifying
decoration
On the mail creation screen, select the
message text fieldea
Function
Background
color
Operating procedure/supplement
Select Background color
Undo
◆ Specifying decoration after entering
characters
• "Insert line", "Insert image" and "Background color" cannot
be operated. Specify decoration first and then operate
them.➝P172
The icon for the
decoration and
name
On the mail creation screen, select the
message text fieldePlace the cursor on the
start position of the decoration and t
Cursor
Decoration selection screen
Select decorationeEnter characters
Setting multiple decorations : Place the cursor on
the icons and meEnter characters
• Ticker, Swing and Word alignment cannot be set at
the same time.
Canceling the selected decoration and entering
characters : Place the cursor on the character
entry position and aeteEnter characters
• Decorations that can be canceled are Font color, Font
size, Blink, Ticker, Swing and Word alignment.
Changing a decoration : me18eSelect
the start position
Canceling all decorations : me19
me0eCheck the decoration
ge ge p
✔INFORMATION
• A decoration can also be selected by pressing m on a
message text entry screen and selecting "Decorate mail".
❖ Operating procedures on the decoration
selection screen of Deco-mail
Function
Font color
Operating procedure/supplement
Select a Font coloreEnter characters
Font size
Select a Font sizeeEnter characters
Insert image
aSelect the insertion source
bSelect a foldereSelect an image
Blink
Enter characters
Ticker
Enter characters
Swing
Enter characters
Word alignment Selecting word alignmenteEnter
characters
Insert line
Lines (ruled lines) are inserted in the color
specified with
(Font color).
Mail
123
F905i_E2kou
F905i.book
Page 124
Monday, April 21, 2008
10:53 AM
• When selecting "Load & Insert" with the message text
Select the end point.
Selecting from the starting position to the end of the
sentence : meg
•
Selecting from the starting position to the beginning
of the sentence : peg
•
Selecting the whole sentence : a
Select the decoration.
Changing font color : 1eSelect a font color
• The color of separating line (ruled line) is also
changed.
• To change the color back to the default, select
"Default".
•
Changing font size : 2e1-3
Blinking characters : 3e1
• Press 2 to cancel.
Making characters into ticker to run from right to left
: 4e1
• Press 2 to cancel.
Making characters swing left and right :
5e1
• Press 2 to cancel.
Changing word alignment : 6e1-3
• Display position of image is also changed.
•
decorated, a confirmation screen for canceling
decoration appears.
When you select "Load & Overwrite", a confirmation
screen for discarding entered contents to load
appears.
Icons used for the list display are defined as follows :
: Template using image with UIM operation
restriction set
: Search by i-mode➝P283
Definitions of icons except the above➝P185 "Inbox
message list screen"
A thumbnail image of a template appears for
thumbnail display. The icons below appear for other
than thumbnail images of template.
: Template using image with UIM operation
restriction set
: Template that an incorrect image is used
: Search by i-mode➝P283
Each time you press t, thumbnail display and list
display switch.
Select a template.
Edit the mailep
◆ Viewing templates and creating mail
MENU [Mail] *
Canceling all decorations in a selected range : 7
Copying characters : 8
Cutting characters : 9
Returning to the previous setting : 0
• Last set decoration or character entry is canceled.
Decorating characters continuously : meRepeat
Step 3
Procedures for checking or canceling decoration➝P172
Step 2-3 in "Entering characters after specifying
decoration"
gegep
✔INFORMATION
• When mails are exchanged with other than the terminal
• Saving i-mode mail as a template is disabled in the cases
below :
- When total size of text and decoration data exceeds 10,000
bytes
- When the total size of text, decoration and attached file exceeds
100 Kbytes
◆ Using template for creating a mail 
cannot be selected.
124
Mail
Set the required items.
Display name : Up to 10 two-byte (20 one-byte)
characters can be entered.
File name : Up to 36 one-byte alphanumeric characters,
" . ", " - " or " _ " can be entered. " . " cannot be used
for the first character of the file name.
Using mail templates
• If the text already exceeds 10,000 bytes, "Read"
On the mail creation screen,
me63e"Yes"
Saving sent/received i-mode mail as template : On
the mail detail view screen, me45
On the mail creation screen, me6e1
or 2
peEdit the mailep
◆ Creating and saving template 
supporting Deco-mail, such as PC, the decoration may not be
correctly displayed.
ae8eSelect a template
F905i_E2kou
F905i.book
Page 125
Monday, April 21, 2008
10:53 AM
When sending data to i-mode terminal except the ones shown
below*, a movie recorded in CompatibleMode is recommended.➝P138
When a receiver's terminal is an i-mode terminal of a model except
those* listed below, movies/i-motion are saved in i-motion mail
Center and the terminal receives i-mode mail containing URL for
i-motion viewing.
Sound recorded with the Sound recorder or Record voice is
attached as movie/i-motion containing only sound. i-mode terminals with mova service cannot receive movies/i-motion containing
only sound.
✔INFORMATION
• If saving a template containing an image that cannot be sent as
mail, the image may be deleted.
◆ Deleting template

Deleting a template
ae8
Place the cursor on the template and
me21
Deleting selected templates :
me22eSelect templatesep
Deleting all templates :
me23eAuthenticate
"Yes"
On the mail creation screen, select the
attachment fieldeSelect a file to attach
Selecting an image ("a Image")
✔INFORMATION
• Attachments not supported by the receivers' terminals may be
deleted or may not be displayed/played correctly.
• Sending an attachment file of a certain size may take time.
Attachment (Sending)
Attaching files
◆ Changing/removing attachments
You can send i-mode mail with files attached.
• Up to 10 files of up to 2 Mbytes in total can be attached.
• Files prohibited from attaching to mail and outputting from
the terminal (except images and melodies with "File
restricted" set for File restriction with your terminal) or files
whose function of UIM operation restriction is set cannot be
attached.
• Attachable file types are as shown below :
File type
Image*1
Movie/i-motion/
sound*2
• Only MP4 format movie/i-motion can
•
Melody

be attached (ASF format or partially
downloaded movie/i-motion cannot be
attached)
Movies/i-motion with replay restriction
set cannot be attached.*3
• Only melodies in SMF or MFi format
can be attached.
Phonebook entry
Schedule data
Bookmark data
Canceling
On the mail creation screen, place the cursor on
the attachment field
ae"Yes"
Condition of attachment
• Only JPEG and GIF format images,
GIF animation and SWF (Flash
graphics) can be attached (created
animation cannot be attached).
Other
Changing attachment : teRetry attaching
files➝P175
Save i-mode mail
Saving i-mode mail and sending later
◆ Saving i-mode mail
• Maximum number of saved items➝P447
On the mail creation screen, me3
i-mode mail is saved in "Unsent" folder of Unsent
messages.
• Word, Excel or PowerPoint file can be
attached.
*1 When sending a JPEG image larger than 10,000 bytes to an i-mode
terminal other than the ones shown below*, it is reduced in the ishot Center to a size that the receiving terminal supports. A mail
with URL for image viewing is received by the terminal of the
receiver's side.
*2 Movie/i-motion with images may be converted to continuous still
images and played depending on receiver's terminals or devices.
Mail
125
F905i_E2kou
F905i.book
Page 126
Monday, April 21, 2008
10:53 AM
◆ Automatically sending mail from a place
where radio waves reach 
You can set so that i-mode mail created out of service area is
automatically sent when moving to a place where radio waves
reach.
• Up to 5 mails can be registered.
•
appears at the top of the display.
• i-mode mail with Auto-send set is saved in "Unsent"
❖ When moving to a place where radio waves
reach
Automatically sent. During automatic sending,
blinks.
When transmission is complete correctly, the i-mode mail is
saved in a folder of Outbox and
disappears.
• When transmission is interrupted or failed, flashes
instead of , and the i-mode mail is saved in "Unsent"
folder of Unsent messages.
Place the cursor on i-mode mail failed in automatic sending
in Unsent messages and press m52 to display
the reason for unsending.
• When all of unsending mails failed in Auto-send in "Unsent"
folder are deleted through edition, cancellation, deletion or
move of such messages to a folder for Message i-αppli or
replacement of UIM,
goes off.
✔INFORMATION
• When failed to be sent because of out of service area, it is
resent up to 2 times.
❖ Canceling Auto-send setting
126
Mail
ae4eSelect a folderePlace the
cursor on the i-mode mail and pe"Yes"
ae4 or 5eSelect a folder
• For SMS,
appears.
Select a mail.
Re-editing the sent mail : Place the cursor on the
mail and p
On the mail creation screen, me2
folder of Unsent messages.
◆ Editing/sending sent/saved i-mode mail
Edit the mailep
Quick mail
Creating mail quickly
i-mode mail and SMS can be sent by simple operation to
the parties with phonebook number 0-99 in the terminal
phonebook.
• The destination is the first mail address for i-mode mail and
the first phone number for SMS.

Sending an i-mode mail in phonebook
number 23
Phonebook number (23)ea
Creating and sending i-mode mail➝P170
Creating SMS : Phonebook numberea (1 sec. or
more)
Creating and sending SMS ➝P205
F905i_E2kou
F905i.book
Page 127
Monday, April 21, 2008
10:53 AM
Receive SMS
✔INFORMATION
• When multiple mails are received at the same time, the terminal
When SMS is received
• Maximum number of saved items➝P447
•
Receive SMS.
blinks and "Receiving message..." appears.
Mail ring alert sounds, the light is lit or flashed and the
reception result screen appears.
The received SMS is saved in a folder of Inbox.
• While receiving SMS, f : Cancel receiving
May be received depending on the receiving
conditions.
Blinking
•
•
•
operates depending on the conditions set for the mail received
last.
When the memory is not enough or the maximum number of
saved items is reached, the unread or unprotected received
mails are overwritten chronologically.
If there is not enough storage space available because storage
is filled with unread and protected mails, reception of SMS is
stopped,
or
appears on the screen. To receive mails,
changing unread mail to read mail, displaying the contents of
unread mails, deleting unnecessary mails or unprotecting is
required.
When UIM already contains the maximum number of SMS (20),
SMS may not be received even though there is space available
in Inbox folder. At this time,
or
appears on the screen.
Move to the terminal or delete SMS in the UIM.
If received SMS has a specification to save to UIM, it is saved
directly to UIM. Note that, when the number of SMS saved in
UIM has reached 20, SMS cannot be received. Delete
unnecessary SMS.
Receiving screen
Reception result screen
a Icon
: Unread SMS exists
: Unread i-mode mail and SMS exists
b Reception result ticker
c Number of received SMS
• When the terminal is folded, the sub-display shows
the caller's name or phone number.➝P97
• If you do not press any key for about 15 seconds after
the reception result screen appears, the previous
screen automatically reappears.
Reading received SMS immediately : On the
reception result screen, 1eSelect a
foldereSelect SMS
• You can reply to and/or forward received
SMS.➝P179
When reception has failed
"× " appears on the right side of "Messages" on the
reception result screen.
Mail
127
F905i_E2kou
F905i.book
Page 128
Monday, April 21, 2008
10:53 AM
Receiving and handling i-mode mail
Mail auto receive
i-mode message
When i-mode mail is received
Checking for i-mode mail
• Maximum number of saved items➝P447
Receive an i-mode mail.
and
blink and "Receiving messages…" appears.
Mail ring alert sounds, the light is lit or flashed and the
reception result screen appears.
The received i-mode mail is saved in a folder of Inbox.
• g : Cancel receiving
The mail may be received depending on the receiving
conditions.
Blinking a
Blinking
Receiving screen
Reception result screen
a Icon
: Unread i-mode mail exists
: Unread i-mode mail and SMS exists
b Reception result ticker
c Number of received i-mode mails
• When the terminal is folded, the sub-display shows
the caller's name or mail address.➝P97
When reception has failed
"× " appears on the right side of "Mail" on the reception
result screen. To receive again, perform i-mode inquiry.
Displaying newly-received i-mode mail
128
Mail
On the reception result screen, 1.
Select a foldereSelect a mail
Side key [▼] (1 sec. or more).
Replying to i-mode mail
Replying to i-mode mail
You can reply the received i-mode mail or SMS.
• You cannot reply to received SMS sent from "User unset",
"Payphone" or "Not support".
MENU [Mail] 6
MENU [i-mode] 63
AA
ae1eSelect a folderePlace the
cursor on the mail and p
F905i_E2kou
F905i.book
Page 129
Monday, April 21, 2008
10:53 AM
Using Quick reply : 2-6.
The selected quick reply format is inserted before the
quoted text.
Edit the mailep
Forwarding i-mode mail
Forwarding i-mode mail
i-mode mail is forwarded as i-mode mail and SMS is as
SMS.
ae1eSelect a folderePlace the
cursor on the mail to forward and a
Edit the mailep
Mail
129
F905i_E2kou
F905i.book
Page 130
Monday, April 21, 2008
10:53 AM
Attachment (receiving)
Downloading Receive option attachment file
You can download, display or save Receive option file
which is being or not yet downloaded.
• When the total size of text and attachment file exceeds 100
Kbytes, a part or all of attachment file is received as a
Receive option attachment file.
• The maximum size of each file that can be downloaded is 2
Mbytes.
ae1eSelect a foldereSelect i-mode
mail with an attachment file
File icon, file name
and file size
Expiration date in
i-mode Center
Operating Auto receive attachment
files
You can display/save the file attached to an i-mode mail.
• The files below cannot be displayed or played on this
terminal. And, they can be saved only to microSD memory
card.
- SWF (Flash graphics) exceeding 100 Kbytes
- Melody exceeding 100 Kbytes
- Multiple phonebook data
- Multiple schedule data
- Multiple bookmark data
• Maximum number of saved items➝P447
• When the maximum number of saved items/area is
reached (data in Data Box)➝P306
To save other than data (file) in Data Box, delete data (files)
stored in the terminal or microSD memory card.

Select the file name.
i-mode mail with an image attached
File icon, file name
and file size
Icon definitions➝P186 "Received message details screen"
◆ Displaying/saving image
ae1eSelect a foldereSelect the imode mail
Place the cursor on the file name of the image
and me63
The next procedure➝P157 Step 2 and the following
steps in "Downloading images"
Saving image of Deco-mail :
me44eSelect the image
The next procedure➝P157 Step 2 and the following
steps in "Downloading images"
◆ Playing/saving i-motion from i-motion mail
ae1eSelect a foldereSelect the imode mail
Place the cursor on the i-motion and
me63
The next procedure➝P166 Step 3 in "Downloading imotion from sites"
Playing : Place the cursor on the i-motion and
me61
Checking the title : Place the cursor on the i-motion
and me62
130
Mail
F905i_E2kou
F905i.book
Page 131
Monday, April 21, 2008
10:53 AM
◆ Playing/saving melody
ae1eSelect a foldereSelect the imode mail
ae1eSelect a foldereSelect the imode mail
• The received melody is either attached after the text
Select the schedule data.
or attached in the middle of the text.
Playing : Place the cursor on the melody and
me61
Checking the title : Place the cursor on the melody
and me65
• For the melody attached in the text, place the cursor
on the melody and press m64.
◆ Displaying/saving phonebook data
Displaying : Place the cursor on the schedule data
and me61
Place the cursor on the melody and
me62
The next procedure➝P157 Step 3 and the following
steps in "Downloading melodies"
◆ Displaying/saving schedule data
ae1eSelect a foldereSelect the imode mail
Checking the file name : Place the cursor on the
schedule data and me62
ae1eSelect a foldereSelect the imode mail
Select a bookmark data.
Displaying : Place the cursor on the bookmark data
and me61
Checking the file name : Place the cursor on the
bookmark data and me62
Displaying : Place the cursor on the phonebook data
and me61
The saved phonebook data is placed in Terminal
phonebook.
• With microSD memory card inserted, press t to
save to "Phonebook" folder of microSD memory card.
The saved schedule data is stored in Scheduler.
• With microSD memory card inserted, press t to
save to "Schedule" folder of microSD memory card.
◆ Displaying/saving bookmark data
Select a phonebook data.
Checking the file name : Place the cursor on the
phonebook data and me62
Enter a title nameep
The saved bookmark data is placed in the first folder in
Bookmark for i-mode and in the first folder in Bookmark
of Full Browser for Full Browser.
• If saving the bookmark without entering a title, the
URL is displayed on the bookmark list.
• With microSD memory card inserted, press t to
save to "Bookmark" folder of microSD memory card.
Mail
131
F905i_E2kou
F905i.book
Page 132
Monday, April 21, 2008
10:53 AM
◆ Displaying/saving Word, Excel or
PowerPoint file
ae1eSelect a foldereSelect the imode mail
Place the cursor on the file and me63
• To delete all attached melodies or Receive option
attachment file at a time, place the cursor on the file
name of melodies or Receive option attachment file
and m64.
"Yes"
Operating Inbox/Outbox
Displaying : Place the cursor on the file and
me61
Inbox/Outbox
Displaying mail in Inbox/Outbox
Checking the file name : Place the cursor on the file
and me62
Enter a display nameep
The saved file is placed in a folder in Other.
When there are more than one folder in Other, a screen
appears asking to select a save destination folder. The
file is saved in the selected folder.
• When "
" appears in the guide area, pressing
t and p saves to "Other" folder of microSD
memory card.
✔INFORMATION
• If a document (Word, Excel, or PowerPoint file) is attached, it is
Temp
Temp
Received/sent/unsent
i-mode mail or SMS can be
Temp
checked.

Save files that cannot be displayed in this terminal to microSD
memory card.
• Data cannot be saved to or displayed to the terminal.
ae1eSelect a foldereSelect the imode mail
Place the cursor on the file and me63
Checking the file name : Place the cursor on the file
and me62
"Yes"
The files are saved in "Other" folder of microSD memory
card.
Deleting attachment
Deleting attachment
ae1eSelect a foldereSelect the imode mail
Place the cursor on the file and me64
• To delete all attached files at a time, place the cursor
on the file name and press m65.
Deleting attached melodies or Receive option
attachment files : Place the cursor on the file
name and me63
132
Mail
Displaying received mails
ae1
Displaying Outbox folder list : ae5
Displaying Unsent messages folder list :
ae4
necessary to switch from i-mode Browser to Full Browser to
download the file.
◆ Saving various files
MENU [Mail] 1
MENU [Mail] 4
MENU [Mail] 5
Select a folder.
• Select a folder for Message i-αppli to activate the
corresponding i-αppli. To display a mail without
starting i-αppli, place the cursor on the folder for
Message i-αppli and press m1.
Temp
F905i_E2kou
F905i.book
Page 133
Monday, April 21, 2008
10:53 AM
◆ Message list/details screen
Select a mail to display.
• Useful functions of Mail➝P192
❖ Inbox message list screen
◆ Reading folder list screen
❖ Inbox folder list screen
a Usage rate of the memory
b Page/Total pages
c Folder
(gray) : No mail
(blue) : No unread mail
: No unread mail or no mail (Secret attribute ON)
: No unread mail or no mail (used in Message i-αppli)
: Unread mail exist
: Unread mail exist (Secret attribute ON)
: Unread mail exist (used in Message i-αppli)
❖ Outbox/Unsent folder list screen
a Page/Total pages
b Folder
(gray) : No mail
(blue) : Mail exist
: Secret attribute ON
: Message i-αppli
a Page/Total pages
b Status icon
: Unread
: Unread (unable to reply)
: Read
: Read (unable to reply)
: Read (replied)
: Read (forwarded)
: Protected
: Protected (unable to reply)
: Protected (replied)
: Protected (forwarded)
* For replied and forwarded, indication priority is given to the
last operation icon.
c Attachment/SMS/Notification/Message i-αppli icon
: Image
: i-motion
: Melody
: Phonebook
: Schedule data
: Bookmark data
: Word file
: Excel file
: PowerPoint file
: Files that cannot be displayed on this terminal
: Multiple files are attached
: SMS
: SMS report request, Missed call notification or Notify
recorded message
: Message to be used in Message i-αppli
: i-αppli To
: A file is attached
d Sender
When saved in the phonebook, the name is displayed.
e Reception date and time
The time is displayed on the reception day and the date is
displayed on other than the reception day.
Mail
133
F905i_E2kou
F905i.book
Page 134
Monday, April 21, 2008
10:53 AM
f Subject
g Message
• For SMS sent from an overseas sender, the sender
address is preceded by "+".
• For i-mode mail or SMS received while staying overseas
(except GMT+08:00), may appear succeeding the
receiving date and time.
❖ Outbox/Unsent messages list screen
a Page/Total pages
b Status icon
No icon : Unprotected
: Protected
: Auto-send set
: Failed in Auto-send
: Protected + Auto-send set
: Protected + failed in Auto-send
c Attachment/SMS/Message i-αppli icon
➝P185 "Inbox message list screen"
d Receiver
e Sent/Saved date & time
f Subject
For SMS, the beginning of the message is displayed.
❖ Received message details screen
: i-αppli (i-αppli To)
: Invalid data attached
* Depending on the conditions of attachment files, icons below
appear in addition to those above.
: Copyrighted (Mail attachment or output from the
terminal disabled)
/ : Data error/Data exceeded
: Receive option attachment file not yet downloaded
: Receive option attachment file being downloaded
: Downloading of Receive option attachment file disabled
SMS icon
: SMS
: SMS (combined SMS)
: SMS (SMS being combined)
: SMS (combined SMS in an incomplete status)
d Mail No./No. of msgs
e Reception date and time
f Address type of Sender's/Broadcast address
: Sender
: Sender (unable to reply)
: Receiver (only for i-mode mail)
: Receiver (unable to reply) (only for i-mode mail)
g Subject
• For i-mode mail or SMS received while staying overseas
(except GMT+08:00), may appear succeeding the
receiving date and time.
✔INFORMATION
For SMS being combined/combined SMS in an incomplete status,
will be displayed for the part that has been cut off and not
been received.
❖ Zooming in/out display of mails
In received message list view screen and received message
detail view screen, message can be zoomed up/down at 15
levels.
cd
a Address type icon
: Receiver ( and
only for i-mode mail)
b Status/Notification icon
➝P185 "Inbox message list screen"
c Types of attachment/SMS icon
Types of attachment
: Image
: i-motion
: Melody
: Phonebook
: Schedule data
: Bookmark data
: Word file
: Excel file
: PowerPoint file
: Files that cannot be displayed on this terminal
: Multiple files are attached
134
Mail
• The operations below can be performed.
1/3 : Zoom in/out
2 : Initial screen reappears
*/# : Scroll (only for list screens)
• When displaying key operation list, press m on any
screen, and select "Display" ➝ "Key function help".

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2009:01:20 13:23:01+09:00
Modify Date                     : 2009:01:20 13:24:56+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2009:01:20 13:24:56+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : F905i.book
Creator                         : Administrator
Document ID                     : uuid:519ab734-4c7e-47c4-bdf3-9d302bb52b4a
Instance ID                     : uuid:9bd983eb-9b54-4b87-af62-7cb8e4822b90
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 69

EXIF Metadata provided by EXIF.tools