Fujitsu OS-F905I Cellular Phone User Manual F905i

Fujitsu Limited Cellular Phone F905i

UserManual.wiki >

Fujitsu >

OS-F905I User Manual >

Manual Part 1 3 HTML Version

Manual Part 1 3

66 Sound/Screen/Light Settings

F905i_E2kou

set as the stand-by display. GIF Animation, created animation

or Flash graphics can also be set.

•

Still image, GIF animation, created animation or Flash

graphics can be set on a Horizontal position.

[Settings & NW

services]

e211

Setting horizontal display stand-by display :

Select any of

Selecting horizontal display :

Select a folder

Select an image, movie/i-

motion or Chara-den

•

Images and movies/i-motion saved in microSD

memory card cannot be selected. Select them after

moving/copying to the terminal.

Setting action of Chara-den : Place the cursor on the

Chara-den to set and

On the Stand-by

settings screen, set the required items

Setting items

➝

P289 Step

in "Setting to the stand-by

display"

"Yes"

•

When setting movie/i-motion as the stand-by display,

the first image is displayed.

•

If the selected image, movie/i-motion or Chara-den

can be zoomed, a confirmation screen appears

asking if you display at the same magnification or

zoom. Select "Yes (Same size)" to maintain the

image size or select "Yes (Large size)" to enlarge the

image to the screen size to display on the stand-by

display.

•

If i-

ppli stand-by display has been set, a

confirmation screen appears asking if you terminate

the i-

ppli stand-by display. When selecting "Yes",

the i-

ppli stand-by display is terminated.

•

When the movie/i-motion or Chara-den is canceled

with no i-

ppli stand-by display set, Show ticker of i-

Channel ticker is set to "Yes".

❖

To play movie/i-motion, animation or Chara-

den set as the stand-by display

•

The operations below are available for movie/i-motion :

/Opening the terminal : Play

: Stop

Side keys [

▲▼

] : Adjust volume

•

The operations below are available for GIF animation,

created animation or Flash graphic :

Opening the terminal/Turning the display/Returning to the

stand-by display/Turning power on : Play

: Pause/Play

•

The following operations are available for Chara-den :

/Opening the terminal : Play

: Stop

◆

Displaying images at random <Set random

image>

You can display multiple still images saved in folders in My

Picture on the stand-by display (Vertical display) switching at

random at the specified timings.

•

Only JPEG/GIF format images (except for GIF animation)

can be displayed.

[Settings & NW

services]

e21112e

Set the

required items

Folder :

Select the folder containing the images.

F905i.book Page 66 Monday, April 21, 2008 10:53 AM

Sound/Screen/Light Settings

F905i_E2kou

Change image :

Set the timing for changing images.

"Yes"

◆

Setting i-

ppli stand-by display

•

Only i-

ppli compatible with the i-

ppli stand-by display can

be set.

•

The i-

ppli stand-by display takes precedence over other

stand-by display settings.

•

Canceling operation, setting and stand-by display of i-

ppli

➝

P223

[Settings & NW

services]

e21115

A list of i-

ppli compatible with the i-

ppli stand-by

display appears.

Select i-

ppli

"Yes"

or is displayed when the i-

ppli stand-by display

is set.

•

With no movie/i-motion or Chara-den set on the

stand-by display, if i-

ppli stand-by display is

canceled, Show ticker of i-Channel ticker is set to

"Yes".

◆

Customizing stand-by display <Info/

calendar layout>

You can divide the stand-by display to several and make

settings to display newly arrived information such as unread

mail or missed call, schedule, calendar, list of notes or

contents of a note in individual areas.

[Settings & NW

services]

e215

Canceling :

to switch patterns

Select an area

•

Press

and select "Yes" to cancel all area

settings.

Setting newly arrived information :

Select

information

•

"When selecting " Unread messages", reception

date/time and titles of unread mails appear.

•

When selecting " Missed call", reception date/time

and the phone number of the caller (or name if saved

in phonebook) appear.

F905i.book Page 67 Monday, April 21, 2008 10:53 AM

68 Sound/Screen/Light Settings

F905i_E2kou

•

When selecting " Recorded messages", recording

date/time and the phone number of the caller (or

name if saved in phonebook) appear.

Setting Calendar :

4e1

•

The number of months that calendar can be

displayed varies by the area size.

Setting Note content :

Select a note

"Yes"

❖

Checking information on the stand-by display

Move the cursor with

and

Call image

Changing images for outgoing voice/

videophone calls

MENU [Settings & NW services] 511

MENU [Settings & NW services] 611

<Example> For voice call

[Settings & NW

services]

e2321e

Select the

Display image field

Changing image displayed while making a

videophone call :

[Settings & NW

services]

e2323e

Select the

Display image field

❖

Outgoing call image priority

When setting outgoing images in multiple functions, they are

displayed in order of the priority below.

Image saved in the terminal phonebook

Alert/image by group of the terminal phonebook

Outgoing call/Videophone dialing (V.phone dialing img.)

When Contact image is set to "ON", it is effective.

Call image

Changing images for incoming voice/

videophone calls

•

This setting is also reflected to Call alert of Call & Answer

or Videophone alert of Videophone.

<Example> For voice call

[Settings & NW

services]

e2322e

Select the

Show image field

Changing image displayed while receiving a

videophone call :

[Settings & NW

services]

e2324e

Select the

Show image field

•

When "Standard image" is set, the image set by

default appears.

•

When "Select image" is selected, select the Image list

field and select an image.

•

When "i-motion" is selected, select a movie/i-motion

from the movie list.

•

When movie/i-motion containing sound and images is

set for Call ring alert or V.phone ring alert, "Sync ring

alert" is set.

❖

Incoming call image priority

When setting incoming images in multiple functions, they are

displayed in order of the priority below.

Image saved in the Terminal phonebook

Alert/image by group of the Terminal phonebook

Call ring alert

/V.phone ring alert

/Call alert (Incoming

call)/Videophone alert (Videophone receiving)

When Contact image is set to "ON", it is effective.

When movie/i-motion containing sound and image is set

in "Movie ringtone", it is effective. When movie/i-motion

containing sound and image has been set in "Movie ring-

tone" for ring alert, ring alert and Show image set for

"Movie ringtone" have precedence over images or movie/

i-motion set in phonebook.

•

When the other party does not notify the caller ID, the

incoming image for voice call depends on Anonymous

caller. An incoming image for videophone call depends on

the settings of Videophone alert.

•

When the sound or image data used in Anonymous caller

is deleted, the settings are automatically modified. The

sound actually heard or the image actually displayed may

differ from the settings.

Contact image

Setting Contact image display from

Phonebook at incoming/outgoing call

You can set if you display the image saved in the Terminal

phonebook for incoming/outgoing voice calls/

videophone calls.

•

The image saved in Phonebook is displayed when the

recorded person calls with the caller ID.

[Settings & NW

services]

e2325e1

F905i.book Page 68 Monday, April 21, 2008 10:53 AM

Sound/Screen/Light Settings

F905i_E2kou

Sent/received/retrieving mail image

Changing displays for incoming/out-

going messages and retrieving

You can set images to appear when sending mails,

receiving mails or received mails, or checking new

messages.

[Settings & NW

services]

e233e1

Select the Display image field

•

When "Default" is selected, the image set by default

appears.

•

When "Select image" is selected, select the List

images field and select an image.

Setting Image message alert : Select the Display

image field

Sub-display

Setting sub-display

◆

Setting an image to display on sub-display

[Settings & NW

services]

e282e

Set the required

items

◆

Displaying phone number or mail address

when receiving an incoming call or mail

[Settings & NW

services]

e281e1

Show callers' info :

The display depends on Receive

display option.

Hide callers' info :

Only the status of incoming/

receiving is displayed.

Display light

Setting display and key light

◆

Setting lighting time <Display light time>

The lighting time of display can be set. When the light is ON,

the display becomes brighter and key area is lit.

<Example> Setting lighting time for Normal use

[Settings & NW

services]

e241

1e1

Setting lighting time for AC adapter connected, i-

mode session, Camera session, Movie camera

session, i-motion or i-

ppli :

7e1

◆

Setting lighting range <Light area>

[Settings & NW

services]

e242e1

◆

Setting brightness of light <Brightness>

[Settings & NW

services]

e243e1

Color scheme

Changing display colors

[Settings & NW

services]

e231e

Select the color

scheme

Select startup menu

Changing startup menu

Set the menu displayed when pressing

on the stand-

by display.

[Settings & NW

services]

e221e1

Using Kisekae Tool

MENU [Settings & NW services] 31

Use of Kisekae Tool allows to collectively set stand-by

display image, menu icons, incoming/outgoing call

images, ring alerts, etc.

•

Using Kisekae Tool, the items below can be set (settable

combinations of items vary by Kisekae Tool).

- Stand-by display, stand-by display (Horizontal), Kisekae

, Basic menu, Basic menu (Background), Battery icon,

Antenna icon, Outgoing call image, Call alert image,

Videophone call image, Videophone alert image, Outgoing

message image, Mail alert image, Image message alert,

Message retrieving, Call ring alert, Videophone ring alert, Mail

ring alert, Alarm clock sound, Screen theme

, Clock format

sub-display

There are such cases that operation when pressing

on the stand-by display may cause different

actions to occur from ordinary ones to be performed or

short-cut operations may be disabled.

Set color theme (Color scheme), font and brightness.

Set Style, Time format, Day and Layout.

Set Clock style, Alert image and incoming mail img.

•

Depending on the type of Kisekae menu, the menu

structure of the first layer may change according to usage

F905i.book Page 69 Monday, April 21, 2008 10:53 AM

70 Sound/Screen/Light Settings

F905i_E2kou

frequency. Also, the number assigned to menu item (item

number) may not be applicable to some menu items. In

such a case, as operations cannot be performed as

described in this manual, switch to the basic menu (

➝

P31)

or reset (

➝

P100) the menu operation log.

◆

Changing Kisekae Tool

[Data BOX]

Select a folder

Place the cursor on Kisekae

Tool

Resetting the settings :

me6e

Authenticate

"Reset all" or

"Reset menu"

Setting list screen operations : Select a

folder

eme5e1

Checking memory :

me4e

Place the cursor

on a data type

•t

: Change unit

"Yes"

Displaying/changing detail information :

me2e1

Detail information

➝

P304

Canceling the setting :

me3e1

Moving/restoring data

me4e1

Moving/restoring

➝

P302, 303

Deleting data :

me5e1

Deleting

➝

P305

Sorting data :

me6e

Set the required

items

Sorting

➝

P306

❖

Setting to Special mode

If you set to Special mode, "Honey" is added to "Preinstalled"

folder, and automatically set to Kisekae Tool.

mepeme13e

Enter "Honey"

in Group name field

•

The items below are set.

- Stand-by display, Stand-by(Horizontal), Kisekae

menu, Battery icon, Antenna icon, screen theme,

Clock display

•

If you perform the same operations as the setting

procedure, "Honey" is deleted from "Preinstalled"

folder, and the set items are restored to the default

settings.

Customizing the menu

The menu items of Kisekae menu can be changed by

yourself, or icons of Basic menu can be changed.

•

Items that can be changed or replaced vary by the set

contents.

•

Only when using a Kisekae Tool compatible with changing

or replacing of the menu items, or when setting "Honey" of

Special mode (

➝

P99), the menu items of Kisekae menu

can be customized.

◆

Customizing the menu items of Kisekae

❖

Changing menu items

Place the cursor on the menu

item

me2e

Select a function to save

•

You can select till second level.

❖

Switching menu items

Place the cursor on the menu

item

me3e

Select the menu item to be

switched to

F905i.book Page 70 Monday, April 21, 2008 10:53 AM

Sound/Screen/Light Settings

F905i_E2kou

❖

Resetting the operation logs of the menu

[Settings & NW

services]

e2231e

"Yes"

◆

Changing the icons and Background of

Basic menu

met

•

When the display menu is Basic menu, you do not

need to press

me2

Select a function

Select a folder

Select an

image

Menu icons of other functions can be set successively in

the same way.

Canceling an item : Place the cursor on an icon and

me1e

"Yes"

Canceling all items :

me2e

"Yes"

Select a folder

Select an image

Background is set.

Canceling a background :

me4e

"Yes"

•

When the display menu is Basic menu, the

confirmation screen of changing to the Basic menu

does not appear.

◆

Reset to default menu items and icons

•

Shortcut menu is also reset to default state.

[Settings & NW

services]

e2232e

Authenticate

"Yes"

Displays/Lights settings

Style theme

Customizing the terminal screen

You can make 3 types of original coordinates by

changing the screen designs such as stand-by display,

menu, Clock, battery icon, antenna icon or Sub-display

pattern.

[Settings & NW services]

e32

Select any of

Set the required

items

Battery icon/Signal level icon

Changing battery/signal level icon

[Settings & NW

services]

e21e3

4e1

F905i.book Page 71 Monday, April 21, 2008 10:53 AM

72 Sound/Screen/Light Settings

F905i_E2kou

Indicator light

Indicating newly arrived information

such as missed calls and unread

mails with lighting

You can set if you indicate unchecked missed call (voice/

videophone call) or unread information (mail/SMS), if any,

by flashing the light while the terminal is folded.

[Settings & NW

services]

e26e1

•

When there are unchecked missed calls when this

field is "ON", the light flashes at intervals of

approximately 6 seconds according to Light color for

Call in Light alert. When there is unread information,

the light flashes at intervals of approximately 6

seconds according to Light color for Mail in Light alert.

Checking a newly arrived information stops blinking.

✔

INFORMATION

•

If there is multiple newly arrived information, the light turns on in

the priority below :

Missed call (voice/videophone call)

Unread information (mail/SMS)

•

When you set indicator light to "ON", if about 6 hours elapsed

since the last information was received or you delete

(the number indicates the number of items) from the

stand-by display, the light stops flashing even if you do not

check the information.

Light alert

Setting the lighting patterns and col-

ors used for an incoming call/mail or

during a call

•

This setting is reflected to Light alert in Call alert,

Videophone alert and Mail alert.

◆

Setting the lighting patterns and colors for

incoming call/mail <Light alert>

<Example> Setting the Light alert for incoming calls

and mail/messages

[Settings & NW

services]

e251

Select the Lighting pattern field

•

When setting to "Sync melody", the light blinks in

"Rainbow". Note that it may not be synchronized

depending on the melody.

•

When there is newly arrived information with Indicator

light set to "ON", the lighting color for the presence of

newly arrived information is as set for incoming call or

mail with "Sync melody" set.

•

When you select "Sync melody" or "OFF", go to Step

Select the Light color field

Select a lighting

color

❖

Light alert priority

When setting Light pattern and Light color for Light Alert of the

light in multiple functions, Light turns on in order of the priority

below.

Alert by contact of the terminal phonebook

Alert/image by group of the terminal phonebook

Light alert/Call alert/Videophone alert/Mail alert

◆

Setting lighting and lighting color during a

call <Call session light>

[Settings & NW

services]

e25e2e

Select the

Light field

•

With this field set to "ON", the lighting color can be

set.

F905i.book Page 72 Monday, April 21, 2008 10:53 AM

Sound/Screen/Light Settings

F905i_E2kou

Select the Color field

Select a lighting

color

◆

Setting lighting for opening, closing and

turning <Open/close/turn>

[Settings & NW

services]

e253e1

Font size

Changing font size

MENU [Settings & NW services] 74

The size of font used for full-screen entry of notepad,

message text, etc. or for displaying screen memo, i-mode

site, Full Browser or mail can be changed.

<Example> When setting with All listed

[Settings & NW

services]

e271

1e1

Setting i-mode :

2e1

Setting Full Browser :

3e1

Setting Mail view :

4e1

Setting Text input :

5e1

Setting Phonebook & log :

6e1

Clock format

Setting clock display

MENU [Settings & NW services] 212

Whether to display clock, the design, size or layout of

clock display on the stand-by display can be set. The

language to use to display the day of the week or the

display format can also be set.

[Settings & NW

services]

e724e

Set the required

items

Style :

Set if you display clock. Select the clock style

from "Analogue", "Digital 1-4" and "World time clock"

when setting it to "ON".

•

When "World time clock" is set, the Japan's time

and the time in the specified time zone appear on

the left and right sides, respectively.

Time format :

Set the clock display format to either "24

hour" or "12 hour".

Clock layout :

Set the position to display the clock.

Day :

Set if you use Japanese or English to display the

day of the week.

•

The display depends on the Select language

setting if "Terminal settings" is set.

World time clock :

Set the time zone to be displayed or

set if you enable summer time when "World time

clock" is selected in Style. And, set the name of the

time zone.

•

When Summer time is "ON", the displayed time is

set forward one hour from the time of the specified

time zone.

F905i.book Page 73 Monday, April 21, 2008 10:53 AM

74 Sound/Screen/Light Settings

F905i_E2kou

F905i.book Page 74 Monday, April 21, 2008 10:53 AM

F905i_E2kou

Security Settings

F905i.book Page 75 Monday, April 21, 2008 10:53 AM

76 Security Settings

F905i_E2kou

Security code

Security code available with the termi-

nal

Some of the convenient terminal functions require entry

of security code. In addition to the terminal security code

for using some terminal functions, there are several types

of security codes such as network security code for

network services and i-mode password. Use these codes

appropriately for the terminal.

•

The terminal security code, network security code or i-

mode password entered is masked with " ".

Precautions related to security codes

•

If you forgot your security codes, or fingerprint

authentication for all of the fingers registered is

disabled when Fingerprint access is "ON", you need to

bring a document (such as a driver's license) for

identifying that you are a subscriber, the terminal and

UIM to a FET Repair Center.

For details, contact the phone number for "General

Inquiries" on the back of this manual.

❖

Terminal security code

The default security code is "0000", which you can change by

yourself.

➝

P107

•

If a wrong terminal security code is entered 5 times

consecutively, the power is turned OFF.

•

For the setting using Verify fingerprint, the fingerprint

authentication screen appears instead of the terminal

security code entry screen. Press

to switch the

terminal security code entry screen. The terminal security

code cannot be entered when Fingerprint access is "ON".

❖

i-mode password

A 4-digit "i-mode password" is required to store or delete sites

in My Menu or apply to or cancel Message Service or i-mode

pay sites. The default security code is "0000", which you can

change by yourself.

➝

P152

There may be passwords required by individual IPs

(Information Providers).

❖

PIN code/PIN2 code

The PIN code and PIN2 code are set for the UIM. Both of the

default security codes are "0000", which you can change by

yourself.

➝

P107

PIN code is a number (code) to be entered each time UIM is

inserted or the terminal is powered ON to confirm the user and

to prevent unauthorized use of the terminal. Making/receiving

calls and terminal operations are enabled by entering PIN

code.

The PIN2 code is the security code to be used when

requesting the issuance of a user certificate, resetting Total

calls cost or changing settings of Reset call cost.

•

When inserting UIM that has been used with another

terminal, the PIN code and PIN2 code should be the same

ones set previously. If no changes have been made to PIN

code and PIN2 code, your codes are "0000".

F905i.book Page 76 Monday, April 21, 2008 10:53 AM

Security Settings

F905i_E2kou

❖

PUK (PIN Unblocking Key)

PUK is a number of 8-digit code used to unblock PIN or PIN2

lock. You cannot change PUK by yourself.

•

If a wrong PUK is entered 10 times consecutively, the UIM

is locked.

✔

INFORMATION

•

When using Password manager with the fingerprint

authentication and a terminal security code access enabled,

change the terminal security code. For the new terminal security

code, avoid use of an easily-guessed number such as the low-

order 4 digits of the phone number and take care not to let

others know the terminal security code. Keep a separate note

of the set security codes.

Note that DoCoMo is not liable for any damages caused

through incorrect use of the data by a third party.

Terminal security code change

Changing terminal security code

[Settings & NW

services]

e461e

Authenticate

nter new terminal security code

Enter the new terminal security code in New

security codecheck field

Setting PIN code

◆

Setting whether to require entry of PIN code

when turning power ON <PIN1 code ON/

OFF>

If a wrong PIN code is entered 3 times consecutively, the PIN

code is locked. Press

and enter PUK.

•

The PIN code entry screen is displayed only when the

current setting is changed.

[Settings & NW

services]

e453e1

Enter PIN code

❖

When PIN1 code ON/OFF is set to "ON"

When the terminal is powered on, the PIN code entry screen

is displayed. The stand-by display appears when correct PIN

code is entered, but all operations are disabled when not.

•

You can make emergency calls (112) even while PIN code

entry screen is being displayed.

✔

INFORMATION

•

When the date/time specified in Alarm clock or schedule has

ome with Alarm auto power ON is "ON", the power is turned ON

and the alarm starts sounding before the PIN code entry screen

is displayed. When

is pressed to stop the alarm, the PIN

code entry screen is displayed. Even if a downloaded melody,

i-motion or music is set as an alarm, operations are carried out

as specified in the default settings.

Enter PUK.

Enter PIN code/PIN2 code

Contact a DoCoMo

shop

Input error 3 times

in a row

Input error 10 times

in a row

Setting a new PIN

code/PIN2 code is

enabled

F905i.book Page 77 Monday, April 21, 2008 10:53 AM

78 Security Settings

F905i_E2kou

◆

Changing PIN/PIN2 code

•

To change the PIN code, you need to set PIN1 code ON/

OFF to "ON".

[Settings & NW

services]

e45e1

Authenticate

Enter the current PIN/PIN2 code

Enter a new

PIN/PIN2 code in the New PIN/PIN2 code entry

field

Enter the new PIN/PIN2 code in the New

PIN/PIN2 code - check field

•

If the PIN/PIN2 code was not correctly entered, a

screen indicating the failure of authentication

appears. Press

and enter the correct PIN/PIN2

code. If a wrong code is entered 3 times

consecutively, the PIN code is locked. Press

and

enter the PUK.

✔

INFORMATION

•

Even if PIN2 code is locked by entering incorrect PIN2 code 3

times consecutively, making/receiving calls, PushTalk calls or

sending/receiving mail is enabled; if PIN code is locked by

entering incorrect PIN code 3 times consecutively, these

operations are disabled.

Unblocking PIN/PIN2 code

If a wrong PIN/PIN2 code is entered 3 times consecutively

on the PIN code entry screen, lock is set. If this happens,

unblock and enter a new PIN code.

On the confirmation screen of the PUK,

"OK"

Enter the PUK (8 digits)

Enter a new PIN/PIN2 code in the New PIN/PIN2

code entry field

Enter the new PIN/PIN2 code

in the New PIN/PIN2 code - check field

Using fingerprint authentication

Use of the fingerprint authentication allows you to skip

the operation of entering the terminal security code with

keypads by sliding your fingertip on the fingerprint

sensor.

•

Even with fingerprint authentication set, pressing

the fingerprint authentication screen displays the terminal

security code entry screen, allowing to enter terminal

security code for authentication. The terminal security code

cannot be entered when Fingerprint access is "ON".

•

Simultaneous use of the fingerprint authentication and a

terminal security code access

➝

P107 INFORMATION in

"Security code available with the terminal"

◆

Precautions for using fingerprint

authentication

•

This function is used to authenticate the information on the

characteristics of fingerprint image. For this reason, user

with fingerprint that does not provide enough

characteristics information may not be able to use the

fingerprint authentication.

•

The 3 readings with the same finger are needed to register

your fingerprint. Do not register the different finger.

•

Authentication performance (the probability of successful

fingerprint authentication for correct sliding of the finger)

depends on the condition of use. The finger conditions

below may make fingerprint registration difficult or reduce

the authentication performance. Taking measures

according to the condition of your finger including washing

hands, wiping hands, using a different finger for fingertip

authentication and applying cream if the hand is rough or

dry may improve the authentication performance.

- Fingers are wrinkled, wet or sweaty after taking a bath, etc.

- Fingers are sweaty or oily enough to obscure ridges of fingertip,

or fingers are soiled with dirt or oil

- Rough or damaged (cut, inflamed, etc.)

- Extremely dry or having tendency to get dry

- Became fat or thin to cause the fingerprint to change

- Fingerprint unclear by wearing away

- Surface in a condition extremely different from that at the time

of fingerprint registration

•

For registration/authentication of fingerprint, align the first

joint of one of your fingers to the center of the fingerprint

sensor, let your finger contact the sensor while sliding your

finger downward and keep sliding your finger until the

fingerprint sensor becomes visible. When sliding your

finger, keep it in the same direction as the terminal. If not,

the likelihood of authentication failure due to difference in

finger positions at registration and authentication becomes

higher.

•

If the sliding movement is too fast or too slow, the

fingerprint may not be correctly recognized. Follow the

instruction message on the screen to adjust the sliding

speed.

•

Slide your finger over the fingerprint sensor area (enclosed

in a frame in Figure A).

Fingerprint sensor area

Figure A Figure B

F905i.book Page 78 Monday, April 21, 2008 10:53 AM

Security Settings

F905i_E2kou

•

The center of the whorl of the fingerprint may be largely

displaced or distorted, which is more often the case with

thumbs. Since this may make registration difficult or reduce

the authentication performance, check the center of the

whorl of your fingerprint and rub your finger against the

fingerprint sensor in such a way that the center of the whorl

passes along the center of the fingerprint sensor as shown

in Figure B.

•

For sliding your finger on the fingerprint sensor, do not set

up your finger on the sensor but place it on the fingerprint

sensor in such as way that the right finger is parallel to the

sensor.

•

Each finger has a different fingerprint. For authentication,

use the finger set for use.

•

If the fingerprint was not correctly read, a warning message

appears. If the fingerprint was not authenticated within a

certain period of time, a confirmation message appears and

the screen returns to the previous screen.

•

When fingerprint registration or authentication is started

with the finger put on the fingerprint sensor, a screen

indicating failure of the activation may appear. Put the

finger off from the fingerprint sensor and retry the operation.

•

When connecting the terminal using a USB cable to a

device which requires grounding such as a desktop PC,

make sure that the device is grounded in advance. If the

connected device is not grounded, fingerprint

authentication may be disabled. In such a case, carry out

fingerprint authentication while touching a metallic part

(frame, external connection jack, etc.) of the connected

device or after disconnecting the terminal from the device.

•

Fingerprint authentication technology does not guarantee

complete identity authentication or verification. Please be

notified that DoCoMo assumes no responsibility for any

damage caused by use of this product or failure to use this

product.

◆

Fingerprint sensor

•

The conditions below may cause failure or damage of the

surface of the finger print sensor.

- Strike or give a hard shock

- Scratch or pick with a pointed object

- Rubbed hard with a fingernail or hard object (such as metal

piece of strap) and scratched

- Fingerprint sensor touched with a hand soiled with dirt, etc. and

the fingerprint sensor surface soiled or scratched by fine foreign

objects, etc.

- Covered with a sticker or painted with ink, etc.

•

The conditions below may make fingerprint scanning

difficult or reduce the authentication performance. Clean

the fingerprint sensor surface from time to time.

- Tainted with dust or sebum, or moisture such as sweat is

attached and condensed

•

If any of the phenomena below occurs, clean the fingerprint

sensor. The phenomena may be improved.

- "Clean surface of sensor." appears

- Fingerprint registration or authenticatithe terminalon fails often

•

To clean the fingerprint sensor, wipe its surface with a dry,

soft, static-free cloth. Long-term use may cause the

fingerprint sensor to get dusty. Do not attempt to remove

the dust with a pointed object.

•

Static electricity may cause malfunction. Before placing the

finger on the fingerprint sensor, eliminate static electricity

by touching a metal object with the hand, etc. Take

particular care in dry seasons such as winter.

◆

Registering fingerprint to be used for

authentication <Register fingerprint>

•

Up to 10 fingerprints can be registered.

[Settings & NW

services]

e462e

Authenticate

"OK"

Press the sensor with your finger and

slide slowly downwards by following the

instruction message

Enter a display name

•

Up to 10 two-byte (20 one-byte) characters can be

entered.

•

appears with the finger print set for use.

◆

Set whether to use only fingerprint

authentication for authentication

•

When setting Fingerprint access to "ON", 2 or more

registrations of different fingers and use for authorize are

required.

•

When setting Fingerprint access to "ON", authentication

using terminal security code is disabled. If authentication is

disabled for any registered fingers due to the terminal’s

operating conditions, finger conditions, failure of the

fingerprint sensor or other reasons, you need to bring a

document (such as a driver's license) for identifying that

you are a subscriber, the terminal and UIM to the FET

Service Center.

<Example> Setting to "ON"

[Settings & NW

services]

e463e

Authenticate

Canceling :

"OK"

F905i.book Page 79 Monday, April 21, 2008 10:53 AM

80 Security Settings

F905i_E2kou

◆

Authenticating fingerprint

When the fingerprint authentication screen

appears, slide your fingertip on the fingerprint

sensor.

•

For fingerprint authentication, press the finger set for

use against the fingerprint sensor.

•

If the authentication is failed, remove the finger from

the fingerprint sensor and retry authentication. When

authentication performance is low, retry the

fingerprint registration.

•

Pressing

or a keypad displays the terminal

security code entry screen, except when Fingerprint

access is "ON".

✔

INFORMATION

•

If fingerprint authentication failed 5 times consecutively, the

terminal security code entry screen appears. If authentication

failed 5 times consecutively when Fingerprint access is "ON",

the power is turned OFF. The cumulative number of

authentication failure is cleared by correct authentication or

redisplaying of fingerprint authentication screen.

◆

Managing fingerprint

You can delete fingerprint set for authentication, or change

the registered name, etc.

•

If all fingerprints set for authentication are canceled or

deleted, the fingerprint authentication becomes

unavailable.

•

When setting Fingerprint access to "ON", and there are 3 or

more registered fingerprints set for authentication, the

fingerprints can be deleted after canceling authorize. Note

that if there are 2 or less fingerprints, they cannot be

canceled authorize or deleted.

<Example> Deleting fingerprint (1 item)

[Settings & NW

services]

e462e

Authenticate

Place the cursor on a fingerprint to delete and

me31e

"Yes"

•

To check the registered fingerprint, press

Setting/canceling authentication : Select a

fingerprint to set/cancel authentication

appears with the finger print set for use.

Deleting selected items :

me32e

Select

fingerprint's

epe

"Yes"

Deleting all data at a time :

me33e

"Yes"

Renaming data :

me4e

Edit the name

Changing the order : Place the cursor on the

fingerprint and

me5

Restricting mobile phone operations

Various lock functions

The terminal is equipped with various lock functions. You

can choose the function to suit your needs.

•

Multiple lock functions can be set simultaneously.

•

You can make emergency calls (112) even when lock

functions are set.

All lock

Preventing unauthorized use

When All lock is activated, menu operations are disabled

to prevent unauthorized use by third parties.

To make an emergency call (112) in All lock, enter the

emergency call number on the stand-by display and

press

The emergency call number entered on the terminal

security code entry screen is marked with " ".

■

For Verify fingerprint

Press

on the stand-by display, enter the emergency

call number on the fingerprint authentication screen and

press

Fingerprint access

Fingerprint authentication

Lock

functions Description Page

All lock

This function disables menu

operations to prevent unauthorized

use by others

P111

Self mode

This function disables all functions

that require communications such as

calls, i-mode, mail, infrared

communication

P112

Personal

data lock

Temporarily restrict use of i-mode,

mail, personal information, etc.

P112

Keypad dial

lock

This function prevents from making

calls by using of the keypads

P113

Privacy

mode

Setting operations for using or

displaying personal information

P114

Receive

display

option

Set if you display information such as

a name when receiving a call or mail

from a party saved in the phonebook

or phonebook

P118

Side key

hold

This function disables

and the

side keys [Å£Å•] when the terminal is

folded to prevent inadvertent

operations

P119

Lock on

Each time the terminal is folded, keys

except

or the side keys [Å£Å•]

are disabled to avoid unauthorized

use of the terminal by others

P119

F905i.book Page 80 Monday, April 21, 2008 10:53 AM

Security Settings

F905i_E2kou

■

When Fingerprint access is "ON"

Press

on the stand-by display, enter the

emergency call number and press

•

The microSD memory card and UIM remain unlocked.

[Settings & NW

services]

e412e

Authenticate

"All locked." appears on the stand-by display.

Canceling : Enter the terminal security code on the

stand-by display.

•

If fingerprint authentication is set, press

and

perform authentication.

✔

INFORMATION

•

A call is received regardless of the settings of Specified caller.

•

Even if a stand-by display is set, the image set by default

appears.

•

All lock takes precedence over it even if Lock on close is "ON".

•

The alarm clock and schedule reminder do not operate even

when the specified date and time arrives.

•

The functions below are available.

- Receiving voice/videophone calls

- Receiving i-mode mail and SMS

- Auto-updating pattern definitions

Only a phone number appears, but the other party's name

or image saved in phonebook does not. The incoming

image, ring alert and other settings are reset to default

settings, and the default image appears as videophone

substitute image. Chaku-moji can be received, but it does

not appear on the incoming call screen. It appears in

Received calls when All lock is canceled.

No receiving actions such as displaying the receiving or

reception result screen, emitting ring alert are taken.

Even when the requestor ID of Location request matches a

phonebook entry, the requestor name does not appear.

F905i.book Page 81 Monday, April 21, 2008 10:53 AM

82 Security Settings

F905i_E2kou

Self mode

Preventing making/receiving calls

MENU [Settings & NW services] 58

This function disables all functions that require

communications such as calls, i-mode, mail, infrared

communication.

(1 sec. or more)

"Yes"

appears on the stand-by display.

Canceling :

(1 sec. or more)

"Yes"

✔

INFORMATION

•

If emergency calls (112) are dialed, Self mode is canceled.

Personal data lock

Disabling to use personal information

You can temporarily restrict use of i-mode, mail, personal

information, etc.

•

This function cannot be activated when Unregistered caller

is "ON".

•

Calls made or received in Personal data lock are recorded.

Making calls from Redial or Received calls is enabled.

[Settings & NW

services]

e413e

Authenticate

When "ON" is set, appears on the stand-by display.

❖

When Personal data lock is ON

All or a part of the settings in the functions below are

unavailable : The microSD memory card and UIM remain

unlocked.

- receive Mail

and SMS

- i-mode, Check new message, Full Browser

-i-

ppli

- Phonebook, Ans.Machine & Voice memo (Movie memo),

Mail logs

- Data Box (All functions)

- Bar code reader, Ir/PC connection

, microSD, Camera,

Sound recorder

- Notepad, Alarm clock

- Call ring alert, Mail ring alert, Alarm sound, Display turn

sound, Melody effect sound, Image/i-

ppli, Reset of Menu

preference, Call image (excluding Contact image), Mail

image, Kisekae/Themes, Sound & Image, Anonymous

caller, Headset key control, Reject/Accept call, Videophone

dialing, Videophone receiving, Video image

, Reset, Delete

all data, Alert settings

- Music player

- IC card content, DCMX, ToruCa, Search by i-mode

- User information

-1Seg

Automatic reception is enabled, but none of receiving

actions such as displaying the receiving or reception

result screen, emitting ring alert are not taken. Mail cre-

ation from Mail logs is also disabled.

Only a mail address appears, but the other party's name

or image saved in phonebook does not.

Data transfer in infrared communication or using USB

connection is disabled.

The default image appears as videophone substitute

image.

Chaku-moji can be received, but it does not appear on an

incoming call screen. It appears in Received calls when

Personal data lock is canceled.

F905i.book Page 82 Monday, April 21, 2008 10:53 AM

Security Settings

F905i_E2kou

✔

INFORMATION

•

When making/receiving a call to/from the party saved in the

phonebook, neither name nor image saved appears and only

the phone number appears.

•

does not appear on the stand-by display even when Answer

machine is activated, and an icon for a recorded message

which has not been played is also not displayed.

•

When data to which Personal data lock applies is set as the

stand-by display or ring alert, the default setting becomes active

in Personal data lock (when menu is a Kisekae menu except the

one set by default, Basic menu appears). The setting you made

is restored when canceled. When data saved in "Preinstalled"

folder is set, however, the setting does not change even in

Personal data lock.

•

On Basic menu or Custom menu, icons of functions and parties

with activation restricted are changed to and person names

appear as "***". For Kisekae menu, the font color is displayed in

gray or the reason is displayed why activation cannot be

performed.

Keypad dial lock

Prohibiting keypad dial

You can set so that calls or PushTalk calls cannot be

made without using Phonebook.

[Settings & NW

services]

e414e

Authenticate

When "ON" is set, appears on the stand-by display.

❖

When Keypad dial lock is ON

The operations below cannot be performed :

- Making calls from Redial or Received calls

- Editing, adding, deleting entries or setting group of

Phonebook

- Editing and resetting recorded user information data

- Phone To (AV Phone To), SMS To and Mail To functions

- Phonebook data or user information transfer to/from external

devices

- Sending mail/SMS

, Sending from Mail logs

- Reading template on the mail creation screen, creating mail

from the mail template list screen or the detail view screen

of mail template

- Using network services by the dial up operation

- Packet communication with a PC

Calls/messages can be made or sent to parties saved in

Phonebook.

A mail can be created from a template that a mail

address saved in the phonebook is entered as the desti-

nation.

Privacy mode

Setting operations for using or dis-

playing personal information

You can set to require authentication each time using

personal information such as phonebook, not to display

a phonebook or schedule with secret attribute or not to

display calls or mails sent/received from parties with

secret attribute.

•

Items and settings of Privacy mode are as follows :

❍

: Setting

: No setting

Setting secrecy is required.

Phonebook

➝

P82, Bookmark

➝

P154, Mail

➝

P188, My

Picture, i-motion, Other

➝

P302, Schedule

➝

P346

•

To enable Privacy mode settings, you need to start Privacy

mode. You can also set automatic activation.

•

If Contact setting is not performed after changing

phonebook entry secret attribute or editing the phone book

entry, activating Privacy mode does not hide mail or SMS

of the changed or edited phonebook entry. To hide them,

perform Contact setting.

➝

P117

Item

Setting

Show all Authorized

access

Hide set

contact/

Hide

secrecy

fldrs/Hide

secrecy

album/Hide

set

schedule

Phonebook & Logs

❍❍❍

Mail & Logs

❍❍❍

My Picture

❍❍❍

i-motion

❍❍❍

Other

❍❍❍

Schedule

❍❍❍

Notepad

❍❍

ppli

❍❍

Bookmark

❍❍❍

Screen memo

❍❍

F905i.book Page 83 Monday, April 21, 2008 10:53 AM

84 Security Settings

F905i_E2kou

◆

Setting Privacy mode operation

[Settings & NW

services]

e421e

Authenticate

et the required items

epeg

Phonebook & Logs :

When using Phonebook, you can

set if you perform authentication.

•

With "Hide set contact" set, phonebook entries or

groups (including phonebook entries in those

groups) with secret attribute, redial, received calls,

mail or SMS for parties with secret attribute do not

appear. When there is an incoming mail or SMS

from a party with secret attribute set, it is received,

but not notified on the screen or with ring alert. With

Incoming: privacy mode set, you can check newly

arrived information by the battery icon.

Mail & Logs :

Set if you require authentication before

using mail or mail logs, etc.

•

With "Hide secrecy fldrs" set, folders with secret

attribute do not appear. When a mail is received

from a party to be sorted to a folder with secret

attribute, it is not notified on the screen or with ring

alert. With Incoming: privacy mode set, you can

check newly arrived information by the battery

icon.

My Picture :

Set if you require authentication before

using My Picture.

•

With "Hide secrecy album" set, albums with secret

attribute do not appear.

i-motion :

Set if you require authentication before using

i-motion.

•

With "Hide secrecy album" set, albums with

secrecy are not displayed. When a movie/i-motion

in an album with secrecy is added to playlist, the

title in the playlist is not displayed either.

Other :

Set if you perform authentication when using

other (Word, Excel, PowerPoint) files.

•

With "Hide secrecy fldrs" set, folders with secret

attribute do not appear.

Schedule :

Set if you perform authentication when

using Scheduler.

•

With "Hide set schedule" set, schedules with secret

attribute do not appear.

Notepad :

Set if you perform authentication when using

Notepad.

ppli :

Set if you require authentication before using i-

ppli.

Bookmark :

Set if you perform authentication when

using Bookmark.

•

With "Hide secrecy fldrs" set, folders with secret

attribute do not appear.

Screen memo :

Set if you require authentication before

using Screen memo.

Incoming: privacy mode :

Set if you notify the

presence of newly arrived information by changing

the battery icon type when there is an incoming call or

mail from a party of a phonebook entry with secrecy

or when a mail is received from a party to be sorted to

a folder with secrecy. Select a battery icon to appear

or select "OFF".

Auto start :

Set the time period till Privacy mode

automatically starts when you do nothing on stand-by

display.

◆

Activating Privacy mode

(1 sec. or more)

Canceling :

(1 sec. or more)

Authenticate

•

When Auto start of Privacy mode setting is other than

"OFF", Privacy mode is activated when the set time

elapses while the stand-by display is on.

❖

When Privacy mode is activated

There are restrictions as below depending on the contents set

by the items of Privacy mode.

<Except i-

ppli : "Authorized access">

•

There is unavailable i-

ppli.

•

When displaying mail group, mail sort or starting Chat mail,

an authentication is required.

•

When sending mail with a still image shot during a call,

even if a mail address of the party you are talking over a call

is registered in the phonebook, that mail address is not

entered as a destination.

F905i.book Page 84 Monday, April 21, 2008 10:53 AM

Security Settings

F905i_E2kou

•

Authentication is required to use Redial, Received calls,

Recorded messages and Voice memos.

•

Only a phone number or mail address appears, but the

name or image saved in Phonebook does not. The ring

alert, vibrator or Substitute image set in Phonebook does

not operate; they operate as set in the terminal. Ring alert

delay is also activated by reception from a party registered

in the phonebook.

•

Missed calls or Recorded messages do not appear in the

newly arrived information area of Info/calendar layout.

•

A mail address appears, but the name saved in Phonebook

from mail or Mail logs does not.

•

On the member list of Scheduler, member names do not

appear.

•

Persons saved to Custom menu cannot be selected. The

icon changes to and a person's name appears as "***".

•

Headset quick-dial is disabled even if Phonebook No. of

Headset key control is set.

•

Newly arrived information for parties with secret attribute

does not appear. No displays are given to redial

, received

calls

*1, 2

, recorded messages, voice memo while talking,

Inbox/Outbox/Unsent messages list, or Mail logs.

•

Unread messages, Missed calls or Recorded messages for

parties with secret attribute do not appear in the newly

arrived information area of Info/calendar layout.

•

Images, movies/i-motion and vibrator saved in a

phonebook entry with secret attribute operates for incoming

calls according to the setting of the terminal. The call

reception screen shows a phone number, but the name.

•

On the member list of Scheduler, member names of

phonebook entries with secret attribute do not appear.

•

On Custom menu, parties of phonebook entries with secret

attribute do not appear.

•

If a phonebook entry with secrecy is set to Phonebook No.

for Headset key control, that Phonebook No. is disabled for

Headset quick-dial.

•

Unread messages do not appear in the newly arrived

information area of Info/calendar layout.

•

Authentication is required when searching a mail using

Phonebook or Scheduler, displaying mail logs,

downloading, upgrading or deleting Message i-

ppli.

•

When a mail is sent or received to/from a party to be sorted

to a folder with secret attribute, it is not notified with newly

arrived information or Mail logs.

•

Mail from a party to be sorted to a folder with secret attribute

do not appear in the newly arrived information area of Info/

calendar layout or Unread messages.

•

When a received message compatible with Message i-

ppli is saved in a folder with secret attribute, even if a

Message i-

ppli is downloaded, they are not automatically

sorted to the folder for Message i-

ppli.

•

With a movie/i-motion not in "Preinstalled" folder set for a

ring alert or incoming/outgoing call image, it operates as

specified in default settings. Functions with a movie/i-

motion in "Preinstalled" folder set, if any, operate

depending on the priority of ring alert or incoming/outgoing

image.

•

Movie/i-motion set for the stand-by display are displayed.

•

When using data in My picture or i-motion in settings for

various functions, an authentication is required. A screen

appears indicating that an item for some functions set for

hiding is reflected after Privacy mode is canceled.

•

If an image not in "Preinstalled" folder is set for schedule, it

operates as specified in default settings.

•

Still images or movies with frames cannot be shot.

•

Images except those in "Deco-mail picture" and "Deco-mail

pict" folders do not appear in Deco-mail picture or Deco-

mail pict list currently used for mail creation.

•

Even when data items in the terminal phonebook are

copied or backed up to the microSD memory card, still

images set in the terminal phonebook are not copied or

backed up.

<i-motion : "Authorized access">

•

If a movie/i-motion not in "Preinstalled" folder is set for

alarm or schedule, it operates as specified in Alarm clock

sound or Schedule sound of Alarm sound. Note that, if a

movie/i-motion not in "Preinstalled" folder is set for alarm or

schedule reminder, it operates with the default setting.

F905i.book Page 85 Monday, April 21, 2008 10:53 AM

86 Security Settings

F905i_E2kou

•

The Calendar set in Info/calendar layout, a red mark

indicating that a Schedule is set does not appear in the

upper right of a date.

•

No schedule area appears for Info/calendar layout.

•

The Calendar set in Info/calendar layout, a day set as

holiday by Days off for the schedule does not appear in red,

it is reset to default settings.

•

Schedule reminder does not sound when the specified time

has arrived.

•

Even when the specified date/time comes, recording

reservation of 1Seg is not activated.

•

Schedule reminder for a schedule with secret attribute does

not sound even when the specified date and time arrive.

•

Schedules with secret attribute do not appear in the

schedule area of Info/calendar layout. It is not included in

the number displayed in No. of items.

•

List of notes and Note in Info/Calendar layout are not

displayed.

<i-

ppli : "Authorized access">

•

Authentication is required to select a folder for Message i-

ppli or to download i-

ppli.

•

When setting i-

ppli on the stand-by display with Stand-by

display, an authentication is required. A message appears

indicating that an item set for hiding is reflected after

Privacy mode is canceled.

•

When overwriting a screen memo, an authentication is

required.

✔

INFORMATION

•

The Browser histories of i-mode and full browser do not display

other browser histories than those in Privacy mode.

•

If all items except Incoming: privacy mode and Auto start are

"Show all", Privacy mode is not activated. If Privacy mode is

already activated, it is cancelled.

•

Deleting all data or perform "Delete all items" with the functions

below also deletes the data hidden in Privacy mode.

- Redial/Received calls

- Recorded messages

- Phonebook entry

-Mail

- Mail logs

- Schedule

- Voice memos

Also when you perform an operation except "Delete one

item" or "Delete selected item", hidden mails are deleted.

•

When Phonebook & Logs of Privacy mode setting is changed

from "Show all" or "Authorized access" to "Hide set contact" in

Privacy mode, a massage appears indicating that Contact

setting is to be made to reflect the privacy to mail.

•

Depending on the settings of Privacy mode, when using mail or

schedule from i-

ppli in Privacy mode or save data in My

Picture, a message may appear indicating that the specified

function cannot be performed.

•

Once authentication is performed to use the function set to

"Authorized access" in Privacy mode, no more authentication is

required before returning to the stand-by display. The same

situation occurs when using multiple functions set to

"Authorized access".

<Example> When sending an image saved in My Picture

through mail attachment in Privacy mode (when Phonebook &

Logs and My Picture is "Authorized access"), authentication is

not required to display Phonebook on a mail creation screen

because it is carried out when displaying My Picture.

◆

Canceling Privacy mode temporarily

On a list screen containing hidden data, etc., you can

temporarily cancel the privacy state to display hidden data.

•

The temporary cancellation is active until the stand-by

display reappears. You may not be able to perform

temporary cancellation depending on the screen.

On the screen to be temporarily cancelled,

(1 sec. or more)

Authenticate

F905i.book Page 86 Monday, April 21, 2008 10:53 AM

Security Settings

F905i_E2kou

◆

Hiding mails from/to senders/receivers with

secret attribute in the phonebook <Contact

setting>

When performing Contact setting after secret attribute of a

phonebook entry is changed or a mail received via data

communications is saved to the terminal, secret attribute can

be set to sent or received mail and SMS in correspondence

with phone numbers or mail addresses in the phonebook

entry with secret attribute.

•

In Privacy mode (when Phonebook & Logs is "Hide set

contact"), mail or SMS with secrecy does not appear.

[Settings & NW

services]

e422e

Authenticate

es"

✔

INFORMATION

•

If Contact setting is not performed after changing phonebook

entry secret attribute or editing the phone book entry, activating

Privacy mode does not hide mail or SMS of the changed/edited

phonebook entry.

•

Mail and SMS to have secret attribute are as follows :

- Sent/unsent messages or SMS with secret attribute in

phonebook entries saved in destination address (TO, CC,

BCC)

- Received messages or SMS sent from phonebook entries

with secret attribute

•

appears at the top of the display and the terminal is in the

data transfer mode (same condition as out of service area)

during Contact setting, the terminal is not available for phone

calls, i-mode operation or data communication. Also, you

cannot switch to other functions by pressing

•

When returning to the stand-by display after receiving an

external phonebook entry with secret attribute or setting secret

attribute for a phonebook entry, a confirmation screen appears

asking if you reflect the secret attribute of the phonebook entry

to mail. Select "Yes" to perform Contact setting. With Privacy

mode inactive, a message appears prompting you to set

Privacy mode.

•

Performing Contact setting in the cases below causes

cancellation of secret attribute for the related mail and/or SMS :

- When secret attribute of a phonebook entry is canceled

- When a phonebook entry with secret attribute is changed

(targeted at a previous phone number or mail address)

- When a phonebook entry with secret attribute is deleted

(including deletion of the phone number or mail address of the

phonebook entry)

Receive display option

Disabling display of a caller's or

sender's name, etc. of a call or mail

received

You can set if you display information such as a name

when receiving a call or mail from a party saved in the

phonebook.

•

This setting takes priority over the settings of Personal data

lock.

•

With "Privacy mode" not set, in Privacy mode (when

Phonebook & Logs is "Hide set contact"), this setting takes

precedence in operations for incoming calls and mail/

messages.

•

The incoming operation when setting Privacy mode and

Receive display option are as listed below.

Operate according to the priority of Select ring alert

➝

P88

●

: Operate according to the settings of the terminal

regardless of multiple incoming call settings

: No incoming call operation

It is assumed that multiple functions are not set simulta-

neously.

Only for phonebook entry with secret attribute set.

Only when sorted to the folders with secrecy set.

Privacy mode is ON.

Receive display option

(Call display)

Privacy

mode

Phone

No.

only

Caller

name

only

Caller

name+

Phone

No.

Phonebook

& Logs

Show all

❍❍❍ ❍

Authorized

access

●❍❍ ❍

Hide set

contact

●❍❍ ❍

i-motion Show all

❍❍❍ ❍

Authorized

access

●●● ●

Privacy mode is

ON.

Receive display option

(Message display)

Privac

y mode

Mail

addres

Subject

Sender

name

Subject

Ticke

ticker

Phone-

book &

Logs

Show all

❍❍ ❍❍❍

Author-

ized

access

●●❍●●

Hide set

contact

✕❍❍❍✕

Mail &

Logs

Show all

❍❍ ❍❍❍

Author-

ized

access

❍❍ ❍❍❍

Hide

secrecy

fldrs

✕❍❍❍✕

i-motion Show all

❍❍ ❍❍❍

Author-

ized

access

●● ●●●

F905i.book Page 87 Monday, April 21, 2008 10:53 AM

88 Security Settings

F905i_E2kou

For when movie/i-motion in except "Preinstalled" folder is set

as ring alert in Alert by contact or Alert by group.

◆

Setting receive display option

[Settings & NW

services]

e44e

Authenticate

Set the

required items

Call display :

Set if you display a name and phone

number when receiving a voice or videophone call

(including during communications).

•

With "Privacy mode" set, no names appear in

Privacy mode (when Phonebook & Logs is

"Authorized access" or "Hide set contact").

•

When "Caller name+Phone No." is set, a phone

number and name appear for an incoming voice

call or videophone call. And, name or phone

number appears on the sub-display.

Message display :

Set how to display results of mail

reception.

•

With "Privacy mode" set, no names appear in

Privacy mode (when Phonebook & Logs is

"Authorized access" or "Hide set contact"). In

Privacy mode (when Mail & Logs is "Authorized

access"), the reception result ticker shows only a

message indicating mail reception.

•

Even if setting to display the subject, it does not

appear on the sub-display.

•

When "Ticker" is set, the reception result ticker or

sub-display shows only a message indicating that

the mail was received.

•

When "No ticker" is set, no reception result ticker

appears. Although name, etc., are displayed on the

sub-display, mail address or phone number is

displayed in Privacy mode (when Phonebook &

Logs is "Authorized access"), and nothing is

displayed on the sub-display in Privacy mode

(when Phonebook & Logs is "Hide set contact").

Side key hold

Preventing inadvertent operation of

side keys

This function disables

and side keys [

▲

] while the

terminal is folded, thus avoiding accidental operations of

the terminal (e.g. when carrying in a bag).

(1 sec. or more)

appears on the stand-by display.

Canceling :

(1 sec. or more)

Lock on close

Locking keypad each time the terminal

is folded

When setting Lock on close to "ON", all keys except

and side keys [

▼

] are locked when the terminal is

folded. Even when Lock on close is canceled, the

authentication screen appears every time the terminal is

opened to prevent unauthorized use by others.

To make an emergency call (112) in Lock on close,

enter the emergency call number from a terminal

security code entry screen, stand-by display or Lock

on close ON screen and press

The emergency call number entered on the terminal

security code entry screen is masked with " ".

■

For Verify fingerprint

On the fingerprint authentication screen, enter the

emergency call number and press

. When a stand-

by display or Lock on close ON screen appears, press

to make an emergency call.

■

When Fingerprint access is "ON"

Press

on the fingerprint authentication screen,

enter the emergency call number and press

. When

a stand-by display or Lock on close ON screen appears,

press

to make an emergency

call.

F905i.book Page 88 Monday, April 21, 2008 10:53 AM

Security Settings

F905i_E2kou

•

Lock on close is not activated when theterminal is as below.

- During a voice call

- While playing melody

- Reception via Infrared communication/iC transmission

- During sounding of schedule reminder, alarm clock or

Countdown timer (including during snoozing, counting down

or in stop state)

- While activating Music player

- Sending/receiving of data using USB connection

- Repeat playing movie saved in microSD memory card

When the operation completes with the terminal folded,

Lock on close is activated.

◆

Setting Lock on close "ON"

[Settings & NW

services]

e411e

Authenticate

et the required items

Lock on close :

Set if you start Lock on close

automatically.

Lock after phone close :

Set the time period from

closing the terminal till activating auto start.

❖

When Lock on close is started

Each time the terminal is folded, Lock on close on time set in

Lock after phone close and locks the keys except

and

side keys [Å£Å•]. Pressing side key [Å£] does not operate

Answer machine, Voice memo or Movie memo.

•

To cancel Lock on close, open the terminal and perform

authentication. When the next screen appears, directly

enter terminal security code or perform authentication by

pressing

✔

INFORMATION

•

Even with Lock on close, making a call by pressing the switch

of Remote Control with Mic (optional) is available.

•

When Lock on close is "ON", it is activated by turning the power

OFF and ON.

•

The functions below are available.

- Turning power ON/OFF

- Receiving a voiceor videophonecall

- Auto update of Data Center

- Switching displaying/hiding calendar layout

- Receiving i-mode mail and SMS

When receiving with the terminal open, none of receiving

actions such as displaying the receiving or reception result

screen, emitting ring alert are not taken.

◆

Indicating activation of Lock on close with a

light <Security indicator>

You can set if you indicate status of Lock on close with a light.

[Settings & NW

services]

e43e

Authenticate

❖

When Security indicator is set

If the terminal is closed and the Lock on close is activated, the

light flashes in blue for about 3 seconds. When set to other

than "Right after", if the set time elapses, the light flashes in

blue for approximately 3 seconds to indicate that Lock on

close was activated. Note that when the light flashes in white

for approximately 3 seconds, it indicates that Lock on close

was not activated.

F905i.book Page 89 Monday, April 21, 2008 10:53 AM

90 Security Settings

F905i_E2kou

Restricting calls/mail/data transfer

Accepting/rejecting calls from speci-

fied phone numbers

Accepting/rejecting incoming call can be set for each

phone number saved in the terminal phonebook.

•

To use this function, specifying Accept/Reject call for each

phone number and Specified caller setting are required.

The settings and the operations of Accept/Reject call are as

listed below.

The call from a specified phone number is disconnected without acti-

vating ring alert and the caller hears a busy tone.

•

This function is activated only when the other party sends

caller ID.

•

Rejected calls are recorded as missed calls.

◆

Specifying phone numbers to accept/reject

Accepting/rejecting incoming call is set for phone numbers

saved in the terminal phonebook.

Search the phonebook

Place the

cursor on a phonebook entry to set and

me343e

Authenticate

Select a

phone number

•

To accept/reject calls from specified phone numbers,

activate settings of Specified caller in succession to

the above step.

✔

INFORMATION

•

When you change or delete the phone number with Accept/

Reject call is set, this setting is canceled. Set Accept/Reject call

again for the new number.

◆

Enabling Accept/Reject call from specified

numbers <Specified caller>

•

This setting applies to all phone numbers with Accept/

Reject call set.

•

Reject call and Accept call are not enabled simultaneously.

[Settings & NW

services]

e551e

Authenticate

Anonymous caller

Setting operations for incoming calls

not to notify caller ID

MENU [Settings & NW services] 1114

MENU [Settings & NW services] 2326

For each reason for hiding caller ID, you can set a

receiving operation for incoming calls notifying no caller

ID.

•

For the ring alert and incoming call image for an incoming

voice call that does not notify the caller ID, this setting takes

precedence over the settings of Call alert (Incoming call).

[Settings & NW

services]

e52e

Authenticate

Set the required items

(Incoming operation) :

Set operations for incoming

calls or PushTalk calls that do not notify caller ID.

•

When "Disable settings" is set, the ring tone set in

each ring alert setting sounds.

•

When setting "Call Rejection", incomings calls from

other parties are rejected.

•

When setting "Ring alert off", ring alert does not

sound. Set an image in "Show image".

•

When setting "Melody", select a melody and set an

image in "Show image".

•

When setting "Movie ringtone", select a movie/i-

motion.

•

When setting "Music", select a music data and set

an image in "Show image".

Setting Music

➝

P87

Setting

Accept/Reject call for each phone

number

Accept call Reject call No setting

Specified

caller

Cancel

settings

Accepted Accepted Accepted

Reject call

Accepted Rejected

Accepted

Accept call

Accepted Rejected

Rejected

F905i.book Page 90 Monday, April 21, 2008 10:53 AM

Security Settings

F905i_E2kou

Show image :

Set an image for incoming calls that do

not notify caller ID.

•

When "i-motion" is selected, select a movie/i-

motion from the movie list.

List images :

When "Select image" is selected in Show

image, select the List images field and set an image.

Ring alert delay

Setting not to answer calls from the

party not saved in Phonebook

•

This function cannot be set when Unregistered caller is

"ON".

[Settings & NW

services]

e15e

Set the required

items

Delayed ring alert :

Specify if you enable Delayed ring

alert.

Delay time (sec) :

Set the time between the arrival of

calls and the start of ringing. (1-99 seconds)

Missed call :

Set whether to display a missed call which

ends in less than the time set in Delay time in

Received calls.

❖

When Delayed ring alert is set

When an incoming voice, videophone or PushTalk call is

received from a party not registered in Phonebook or such call

is received without caller ID notification, the reception is

notified only with screen display for the specified period of

time. After the set time has elapsed, normal ring alert action

starts.

•

Before the specified time elapses, ordinary call receiving

operation such as answering an incoming call or replying it

with Answer machine can be performed.

•

This function operates even for incoming call from the other

party saved in Phonebook in Personal data lock or Privacy

mode (when Phonebook & Logs is "Authorized access").

•

This function operates also when there is an incoming call

from a party with secrecy in Phonebook in Privacy mode

(when Phonebook & Logs is "Hide set contact").

Unregistered caller

Rejecting calls from phone numbers

not saved

•

Combination of Caller ID request service is recommended

when used.

•

This function cannot be set in Personal data lock or when

Delayed ring alert of Ring alert delay is "ON".

[Settings & NW

services]

e552e

Authenticate

❖

When Unregistered caller is set

The voice/videophone/PushTalk call from a caller who is not

saved in Phonebook is disconnected without activating ring

alert and the caller hears a busy tone.

•

Rejected calls are recorded as missed calls.

•

Reject calls from a party with secret attribute in Phonebook

in Privacy mode (when Phonebook & Logs is "Hide set

contact").

•

Regardless of this setting, i-mode mail and SMS are

received.

F905i.book Page 91 Monday, April 21, 2008 10:53 AM

92 Security Settings

F905i_E2kou

F905i.book Page 92 Monday, April 21, 2008 10:53 AM

F905i_E2kou

Camera

Copyrights and portrait rights

The copyright laws prohibit unauthorized use of photographs or movies and site (program) or website information

obtained by using the terminal without the permission of the relevant copyright holders except for personal use.

Please refrain from unauthorized use of portraits or names of other persons that may infringe on portrait rights. When

releasing shot or recorded work on Internet websites, use with care not to infringe on copyrights or portrait rights.

Note that taking photos or recordings at some demonstrations, performances or exhibitions may be prohibited even

when only for personal use.

Please be considerate of the privacy of individuals around you when taking and sending photos

using camera-equipped mobile phones.

F905i.book Page 93 Monday, April 21, 2008 10:53 AM

94 Camera

F905i_E2kou

Before using camera

◆

Using camera

•

Though the camera is manufactured using extremely

accurate technology, some pixels and lines may always be

displayed to be lighter or darker than you expect. Images

shot under very low light intensity contain increased noise

such as white lines, but it is not a malfunction.

•

If the terminal is left in a warm place or exposed to direct

sunlight for a long time, images to be shot may be

deteriorated.

•

When attempting to take a photo of a strong light source

such as the sun or a lamp, images may become dark or

degraded.

•

Depending on the characteristics of the lens, distorted

images may be displayed.

•

Shooting images under illumination flickering at high

frequency such as fluorescent lamp, mercury vapor lamp or

sodium vapor lamp may cause the screen to flicker or stripe

patterns to appear on the screen, which is called flicker

phenomena, giving different coloring for some shooting

timings. Flickers or stripes may be reduced by adjusting the

brightness for shooting.

•

Images shot with the camera may differ from actual

subjects in color and brightness, depending on conditions.

•

There is a small time lag between taking a picture and

pressing

or side key [

▲

]. Do not move the terminal for

a while after pressing

or side key [

▲

]. If you take a fast

moving subject, the image taken might slightly differ from

the subject displayed in the screen when pressing

side key [

▲

◆

Shooting procedure

Shooting with side key [

▲

] is also available.

•

more when reading a page

is completed or all lines are

not displayed during a page

appearing.

Scroll bar

F905i.book Page 108 Monday, April 21, 2008 10:53 AM

109

i-mode/i-motion

F905i_E2kou

•

Up to 10 URLs are stored in Browser history of each of i-

mode and Full Browser. When exceeding the limit, record

is overwritten chronologically.

de4

Select URL.

Deleting data : Place the cursor on the URL and

me41e

"Yes"

Deleting selected data :

me42e

Select

URLs

epe

"Yes"

Deleting all data :

me43e

Authenticate

"Yes"

Reading and operating sites

F905i.book Page 109 Monday, April 21, 2008 10:53 AM

110 i-mode/i-motion

F905i_E2kou

◆

Displaying next or previous pages

The terminal records the display history of up to 20 pages. A

storage area in the terminal that temporarily stores the display

history of pages is called "Cache" and the recorded pages in

the cache can be displayed by pressing

without making

communications.

•

When the terminal cache size has been exceeded or when

displaying a page which has been set by the site to forcibly

read the latest information, communications are started.

◆

Scrolling screen

•

You can scroll the screen up and down by pressing

Hold down to scroll continuously.

◆

Reloading information

During site display,

me5

◆

Displaying URL

During site display,

me91

◆

Switching Scroll bar display

During site display,

me98

•

You can switch displaying/hiding the Scroll bar each

time you press

m98

Go to location

Displaying websites

MENU [i-mode] 51

You can connect to the Internet and access i-mode

compatible websites. Specify websites by entering the

address (URL) to connect to.

de51

Enter a URL

•

In alphabet input mode, repeatedly press

enter " . ", " / ", " - ", etc. and

to enter

"@imode.net.tw", ".com", ".com.tw", ".net.tw",

".edu.tw", ".org.tw", ".gov.tw", "http://www.", "https://

www.", "www.", ".asp", ".html", ".htm" or ".php".

◆

Displaying pages using Entry URL log

MENU [i-mode] 52

•

Up to 20 URLs are stored in the Entry URL log of each of i-

mode and Full Browser. When exceeding the limit, record

is overwritten chronologically.

de52

Select the URL of website

Indicate you can return to

the previous pages already

displayed.

Indicate you can proceed to

the next pages already

displayed.

Scroll the page by screen.

Hold down the key to scroll

continuously by screen.

When all lines are not displayed

or the cursor can be moved to a

link item,

▲

▼

appears in

the guide area.

F905i.book Page 110 Monday, April 21, 2008 10:53 AM

111

i-mode/i-motion

F905i_E2kou

Deleting a URL : Place the cursor on the URL and

me41e

"Yes"

Deleting selected URLs :

me42e

Select

URLs

epe

"Yes"

Deleting all URLs :

me43e

Authenticate

"Yes"

◆

Displaying characters correctly <Switch

encode>

While the site or website is displayed,

me961

•

The character encode is switched each time

m961

is pressed in the order below :

Auto switch

➝

SJIS

➝

EUC

➝

JIS

➝

UTF8. Press

m962

to switch to "Auto switch".

•

When displaying a site or website, "Auto switch" is

set.

Bookmark

Recording websites and sites for

quick browsing

◆

Recording in Bookmark

Display the site or

website

eme21e

Select a folder to

add to

Enter a title name

◆

Displaying site or website from Bookmark

MENU [i-mode] 2

de2e

Select a folder

•

Icon definitions :

: No bookmark

: Bookmark exists

: No bookmark (Secrecy ON)

: Bookmark exists (Secrecy ON)

Select a bookmark.

The meaning of the icon

➝

P154 Step 3 in "Saving

bookmarks in Access shortcuts"

◆

Creating/deleting folders

•

You can set secret attribute to a created folder. In Privacy

mode (when Bookmark is "Hide secrecy fldrs"), folders with

Secrecy set to "ON" are not displayed.

•

Up to 20 folders can be created for each of i-mode and Full

Browser.

•

Preinstalled "Folder 1" folder cannot be deleted.

•

In Privacy mode (when Bookmark is "Hide secrecy fldrs"),

the secrecy cannot be set and folders with secrecy cannot

be operated.

•

Setting Privacy mode

➝

P114

<Example> Create

de2

me1

Changing folder setting : Place the cursor on the

folder and

me3

Changing the order of the folder : Place the cursor

on the folder and

me7

Deleting : Place the cursor on the folder and

me2e

Authenticate

"Yes"

Set the required items

Secrecy:

Set if you display a folder in Privacy mode

(when Bookmark is "Hide secrecy fldrs").

F905i.book Page 111 Monday, April 21, 2008 10:53 AM

112 i-mode/i-motion

F905i_E2kou

◆

Connecting to sites or websites using

simple key sequence <Access shortcuts>

When recording a bookmark as access shortcut, you can

quickly display the site or website from the stand-by display.

❖

Saving bookmarks in Access shortcuts

•

You can record 1 bookmark for each key of the keypad, up

to 10 bookmarks in total for i-mode and Full Browser.

•

Bookmark in a folder that Secrecy is "ON" cannot be saved.

de2e

Select a folder

Place the cursor on the bookmark to record and

Canceling : Place the cursor on the bookmark and

me2

Select a destination to save.

•

On the bookmark list, the icon for the recorded

bookmark switches from to - .

❖

Displaying site or website using Access

shortcuts

9ed

❖

Operating from Access shortcuts list

MENU [i-mode] 81

<Example> Saving shortcut

de61

Place the cursor on Not recorded and

Displaying sites : Select a bookmark.

Canceling : Place the cursor on the bookmark and

me2e

"Yes"

"i-mode" or "Full Browser"

Select a

folder

Select a bookmark to record

For the bookmark of Full Browser recorded as access

shortcut, appears on the access shortcut list.

F905i.book Page 112 Monday, April 21, 2008 10:53 AM

113

i-mode/i-motion

F905i_E2kou

◆

Deleting bookmark

de2

Select a folder.

Deleting all bookmarks :

me4e

Authenticate

Go to Step 4

Place the cursor on a bookmark and

me31

Deleting selected bookmarks :

me32e

Select bookmarks

Deleting all the bookmarks in the folder :

me33e

Authenticate

"Yes"

◆

Moving bookmark

You can move saved bookmarks to another folder.

•

Bookmarks can be copied to microSD memory

card.

➝

P294

de2e

Select a folder

Place the cursor on a bookmark and

me51

Moving selected bookmarks :

me52e

Select bookmarks

Moving all in the folder :

me53

Select a folder to move the bookmark to.

•

If you try to move a shortcut-saved bookmark to a

folder with Secrecy set to "ON", a confirmation screen

for canceling Access shortcuts appears.

◆

Sorting bookmarks <Sort>

The bookmark list can be sorted temporarily. When the list

display is closed, sorting is restored to "By access date".

•

You can sort all folders.

de2e

Select a

folder

eme6e1

◆

Attaching bookmark data to an i-mode mail

de2e

Select a folder

Place the cursor

on the bookmark and

me9

The next procedure

➝

P170

Screen memo

Saving site contents

Site screens in a display can be saved as screen memo.

◆

Saving screen memo

•

The maximum size of screen memo file that can be saved

is 100 Kbytes.

Display a site

eme31

Enter a title name

•

If you register the screen memo without entering a

title,

無主旨

" appears in the screen memo list.

◆

Displaying screen memo

MENU [i-mode] 3

de3e

Select a screen memo

•

Icons used for the screen memo list are defined as

follows :

: Ordinary screen memo

: Protected screen memo

•

The bar indicating the usage rate of the memory

appears on the screen memo list.

•

Operation of the screen memo display is the same as

during site display except for a part.

◆

Protecting screen memo

By protecting, they can be prevented from being erroneously

erased or being overwritten because of the lack of the memory

space.

•

Maximum number of protected items

➝

P447

<Example> Protecting one entry

de3

Place the cursor on the screen memo and

me11

•

The icons of the protected screen memo changes

from to .

Protecting selected screen memos :

me12e

Select screen memos

Unprotecting one entry : Place the cursor on a

screen memo and

me13

Unprotecting selected items :

me14e

Select screen memos

Unprotecting all screen memos :

me15

◆

Deleting screen memo

<Example> Deleting one entry

de3

Place the cursor on the screen memo and

me21

Deleting selected screen memos :

me22e

Select screen memos

F905i.book Page 113 Monday, April 21, 2008 10:53 AM

114 i-mode/i-motion

F905i_E2kou

Deleting all screen memos at a time :

me23e

Authenticate

"Yes"

◆

Sorting screen memo <Sort>

The screen memo list can be sorted temporarily. When the list

display is closed, sorting is restored to "By date".

de3eme8e1

Downloading data such as images and melodies from sites

Downloading various data (files) from

sites

You can download data (files) from sites and store them

in the terminal.

•

The data (file) and the maximum size of each data that can

be saved are as shown below.

- Image : 100 Kbytes

- Melody : 100 Kbytes

- Chara-den : 100 Kbytes

- Kisekae Tool : 2 Mbytes

•

You can stop downloading by pressing

(the key

to press varies by the file format).

•

However, some data (files) may not be displayed, played or

set correctly.

•

Maximum number of saved items

➝

P447

•

When the maximum number of saved items/area is

reached (data in Data Box)

➝

P306

To save data (files) except those in Data Box, delete data

(files) stored in the terminal or microSD memory card.

•

Some data (files) can be saved to microSD memory card.

◆

Copying URL

<Example> Copying URL of a site

Display URL of a site

eme1

Displaying URL

➝

P151

Select a copying area.

Copying/Pasting method

➝

P367

◆

Attaching URL to i-mode mail

You can send i-mode mail with attaching URL or website from

the currently displayed site.

Display a site

eme7

The next procedure

➝

P170

◆

Adding phone number and mail address

into phonebook <Phonebook new entry>

<Example> Saving new phone number displayed on

the site screen

Display a site.

Place the cursor on the phone number and

me81e1

Adding to existing phonebook entry : Place the

cursor on a phone number and

me82e1

Select

phonebook entry

Save the name or mail address, etc.

Phonebook new entry

➝

P75, 76

◆

Adding URL in phonebook

<Example> Adding data from the bookmark list

de2e

Select a folder

Place the cursor on a bookmark and

me71

Adding to existing phonebook entry : Place the

cursor on the bookmark and

me72e

Select phonebook entry

Save the name or mail address, etc.

Phonebook new entry

➝

P75

Making i- mode settings

i-mode settings

Making i-mode settings

•

The settings below are also effective for Full Browser :

- Connection timeout

- Display light

- Manage certificate

F905i.book Page 114 Monday, April 21, 2008 10:53 AM

115

i-mode/i-motion

F905i_E2kou

- Skip password

◆

Setting connection time out <Connection

timeout>

MENU [i-mode] 82

Set the timeout for connection with the i-mode Center. If

connection is not normally established, it is automatically

interrupted after the set period of time.

de62e1

◆

Setting Display light

MENU [i-mode] 83

Set the display light to be used to display the sites or screen

memos or MessageR/F or i-Channel.

de63e1

•

If you set "Terminal setting", the settings of Display

light of Display is used.

◆

Setting image display and sound effect

MENU [i-mode] 86

You can set an image or Flash graphics sound effect to be

used when displaying a site, screen memo, etc.

de65e

Set the required items

Image :

Set if you display images.

•

When "Not display" is set, appears instead of

image, Flash graphics or GIF animation.

•

When "Display" is set, Animation and Use phone

information can be set.

Animation :

Set if you display GIF animation.

•

When "Not display" is set, the first image of the GIF

animation appears.

Use phone information :

Set if you use data saved in

the terminal for displaying Flash graphics.

Sound effect setting :

Set if you play the sound effect

of Flash graphics or data broadcasting, data

broadcasting site.

Using Certificate

Operating certificate

(TBD)

Using i-motion

i-motion

Movie and sound can be downloaded from sites or

websites and played/saved. Saved movie and sound can

be played as i-motion and be set for Movie ringtone. The

vocals of singers can be used for a ring alert as well as

melodies (some i-motion may not be set for Movie

ringtone).

•

i-motion items can be categorized to 2 types listed below.

The data types cannot be changed or selected when

downloading.

Type Playing action

Normal type (can

be saved

)

Play while downloading i-motion data (Up

to 10 Mbytes). After completion of

receiving, the i-motion can be operated in

the same way as i-motions playable after

downloading all data.

Play after downloading all i-motion data (Up

to 10 Mbytes).

F905i.book Page 115 Monday, April 21, 2008 10:53 AM

116 i-mode/i-motion

F905i_E2kou

Some i-motion may not allow saving.

Downloading i-motion from sites

•

Maximum number of items that can be saved

➝

P447

Display a site

Select an i-motion

Downloading starts, and when completed, completion

message appears.

•

During downloading, press

and select "Yes" to

stop downloading.

For i-motion with file size of 500 Kbytes to 10 Mbytes

that can be saved partially, resuming confirmation

screen appears. If you select "Yes", downloading is

resumed, and if you select "No", partial saving

confirmation screen appears. The rest of partially

saved i-motion can be downloaded.

➝

P285

INFORMATION in "Playing movie/i-motion"

•

When a streaming type i-motion is selected, playing

confirmation screen appears.

•

The operations below can be performed while playing

i-motion playable while being downloaded. After

completion of playing, the i-motion can be operated in

the same way as i-motions playable after

downloading all data.

: Pause/Play (Normal type)

/Side keys [

▲▼

] : Adjust volume

: Streaming type is interrupted by selecting "Yes"

on the confirmation screen, and Normal type is

stopped (Pressing

while stopped plays the i-

motion from the beginning)

: Display detail information

Even when pausing or stopping the play, the data

download continues.

•

Key operations (except

) for playing back i-

motion playable after downloading all data

➝

P284

Step 3 in "Playing movie/i-motion"

"Save"

•

i-motion of streaming type cannot be saved.

Replaying : "Play"

Displaying detail information : "File property"

Stopping saving : "Back"

"No"

•

For streaming type i-motion, if you select "Back", the

site screen reappears.

Enter a display name

The downloaded i-motion is saved in "i-mode" folder of

i-motion.

•

When " " appears in the guide area, pressing

and

saves data without file restriction to

"Movie" folder (saves i-motion with sound only to

"Other movie" folder) of microSD memory card. After

pressing

, place the cursor on the destination

folder of microSD memory card and press

save data with file restriction to the selected folder.

•

When saving in the terminal, pressing

displays

the usage list of the i-motions, and the i-motion can be

set for the stand-by display, etc.

➝

P286

✔

INFORMATION

•

Only i-motion files in MP4 (Mobile MP4) format can be

downloaded and/or played. Downloading or playing of i-motion

files in ASF format is disabled.

•

Even if ticker (text) is included in i-motion, the text cannot be

played.

•

The replay restrictions such as number of playable times or

expiration of playing may be set for i-motion files.

•

When i-motion is played while the data is being downloaded,

play may be temporarily stopped in waiting for data reception.

The playing is automatically resumed when data reception

starts.

•

When i-motion is played while the data is being downloaded, it

may become unable to play, or image may be blurred

depending on the condition such as signal quality. i-motion can

be played after the download if the data is normally received.

However, some i-motion may allow download of data but may

not be played correctly.

•

When i-motion data is improper, reception of i-motion may be

canceled.

•

Even when Ring alert or Receive display appears as "Available"

in detail information displayed before saving i-motion used from

ppli, saving of it may be disabled. The i-motion cannot be set

as Ring alert or Movie alert.

•

When playing streaming type i-motion while the data is being

downloaded, if you fold the terminal or a call comes in or the set

date/time of the recording timer reception of 1Seg, alarm clock

or schedule comes, downloading is interrupted and the playing

is stopped. When playing normal type i-motion while the data is

being downloaded, if you fold the terminal, the playing is

stopped but downloading continues.

•

When the maximum number of saved items/area is reached

➝

P306

Streaming type

(cannot be saved)

Play while downloading i-motion data (Up

to 10 Mbytes). Deleting i-motion data after

playing.

Type Playing action

The amount of data received/

total amount of data

F905i.book Page 116 Monday, April 21, 2008 10:53 AM

117

i-mode/i-motion

F905i_E2kou

i-motion settings

Setting Auto play of i-motion

MENU [i-mode] 87

Set if you automatically play normal type i-motion while

or after downloading.

de66e

Select Auto replay setting

field

2ep

✔

INFORMATION

•

Press

and select "Display"

➝

"i-motion settings" to operate

from the site screen.

•

Even when "Auto Play OFF" is set, i-motion can be played by

selecting "Play" on the download completion screen.

•

For streaming type i-motion, replaying confirmation screen

appears regardless of this setting.

F905i.book Page 117 Monday, April 21, 2008 10:53 AM

118 i-mode/i-motion

F905i_E2kou

F905i.book Page 118 Monday, April 21, 2008 10:53 AM

119

F905i_E2kou

Mail

F905i.book Page 119 Monday, April 21, 2008 10:53 AM

120 Mail

F905i_E2kou

Using SMS

Creating and sending SMS

MENU [Mail] 811

Send a character message to a mobile phone number as

the destination.

•

Maximum number of saved items

➝

P447

•

Reading received/sent/unsent SMS list/detail view screen

➝

P185

<Example> Creating/sending by entering address

directly

(one second or more) Select the receiver

field

"Direct input"

Enter the address

Entering mail address from Mail logs : Select "Sent

msg log" or "Received msg log"

Select a log

Entering by searching phonebook : "View

phonebook"

Search the phonebook

Select a

phonebook entry

Select the Message text field

Enter the

message text

•

When "Chinese" is set for Font type in SMS settings,

up to 670 characters can be entered. When "English"

is set, up to 1530 characters including one-byte

alphanumerics and symbols (except for

｀。「」、・

゛゜

) can be entered.

•

Press

to enter line feed (except one-/two-byte

number input mode). A line feed is counted as a

character of message text. The line feed may be

replaced by a space on the other party's terminal.

Inserting signature :

me46

•

To save SMS without sending it, press

. The

SMS is saved of "Unsent" folder of Unsent messages.

✔

INFORMATION

•

If, in the SMS setting, the sending character type is set to

"Chinese" and characters entered are 70 characters or less it

will be sent as one SMS. If characters entered are more than 70

characters you can send it as a maximum of 10 combined

SMSes containing 67 characters per message. If the sending

character type is "English" and characters entered are 160

characters or less it will be sent as one SMS. If the characters

entered are more than 160 characters you can send it as a

maximum of 10 combined SMSes that contain 153 characters

per message.

•

When transmission is completed correctly, the SMS is saved in

a folder of Outbox. When the memory is not enough or the

maximum number of saved items is reached, the unprotected

sent mails are overwritten chronologically.

•

Depending on the signal quality, font type or the terminal of the

other party, characters may not be displayed correctly at the

receiver side.

•

The type of font and whether to receive SMS report request are

set in SMS settings beforehand. You can also change the

settings of SMS report request and Keep in SMS center after

starting creation of SMS.

•

When Font type is English and symbols (| ^ { } ~ ¥) are entered,

the number of characters that can be sent is reduced.

Moreover, symbol (-) can be entered and sent, but it is replaced

with a space on the receiver's terminal.

•

When transmission fails, an error message appears and the

SMS is saved in "Unsent" folder of Unsent messages.

•

If setting SMS report request to "Request" and send SMS, you

receive SMS report request that notifies you that the other

terminal received the SMS. SMS report request is saved in the

folder in Inbox.

•

Even if Activate/Deactivate of caller ID notification is "Not

notify", caller ID is sent to the receiver when SMS is sent.

•

When the memory is not enough or the maximum number of

saved items is reached, SMS cannot be created. Delete

unnecessary i-mode mail and/or SMS from the folder in Unsent

messages.

•

With the 2in1 service activated, you cannot send SMS for

Number B.

F905i.book Page 120 Monday, April 21, 2008 10:53 AM

121

Mail

F905i_E2kou

i-mode mail

Only by subscribing to i-mode, i-mode mails can be

exchanged not only with i-mode terminals but also via

Internet.

In addition to message text, you can attach up to 10 files

(images, etc.) of up to 2 Mbytes in total to a mail.

Moreover, Deco-mail is available, a font color, size and

background color of message text can be changed, and

many Deco-mail pictograms that can be inserted similarly

to pictograms are preinstalled, allowing you to easily

create and send expressive mails.

Creating i-mode mail/Deco-mail

Compose message

Creating and sending i-mode mail

MENU [Mail] 2

me1e3

Select the receiver field.

Select entry method

Enter the address

Select the subject field

Enter the subject

•

Up to 200 bytes can be entered.

Select the message text field

Enter the

message text

•

Up to 10,000 bytes can be entered.

Inserting signature :

me57

•

To stop transmission, press

on the connecting

screen or press

on the sending screen. Note that

the i-mode mail may be sent depending on the

operation timing. The sent mail is saved in "Unsent"

folder of Unsent messages.

Total bytes of characters

and decoration

Receiver field

Mail creation screen

Subject field

Attachment field

Message text field

The remaining number of

characters that can be

entered as the text (bytes)

F905i.book Page 121 Monday, April 21, 2008 10:53 AM

122 Mail

F905i_E2kou

✔

INFORMATION

•

When transmission is complete correctly, the i-mode mail is

saved in a folder of Outbox. When the memory is not enough or

the maximum number of saved items is reached, the

unprotected sent mails are overwritten chronologically.

•

When Deco-mail pictogram (Pictogram D) is used, the mail is

sent as Deco-mail.

•

When i-mode mail containing pictograms is sent to a non-i-

mode terminal, the pictograms are automatically converted to

similar pictograms on the receiver's terminal. Note that, the

pictograms may not be displayed correctly on the receiver's

terminal depending on the models and/or functions of the

receiver's terminals and they may be converted to 000 if there

are no applicable pictograms.

•

Depending on the signal quality, characters may not be

displayed correctly at the receiver side.

•

Even when i-mode mail is sent correctly, an error message

"Transmission failed." may appear depending on the signal

quality.

•

When transmission fails, an error message appears and the i-

mode mail is saved in "Unsent" folder of Unsent messages.

•

Error messages for address unknown, etc. may not be received

when mails are sent to addresses except DoCoMo.

•

When the memory is not enough or the maximum number of

saved items is reached, i-mode mail cannot be created or send.

Delete unnecessary i-mode mail and/or SMS from the folder in

Unsent messages.

•

When a mail exceeding 10,000 bytes in process of creation is

automatically saved due to other functions being started, etc.,

some part of it may not be saved.

◆

Adding address <Add address>

i-mode mail can be sent to up to 5 addresses at the same time

(Simultaneous sending).

•

There are 3 address types of receivers as below.

: Main receiver

: Other receiver(s) than the main receiver to inform the

contents of the mail

: The receiver(s) to inform the contents of the mail

without making the mail address displayed on other

receivers' terminals

•

When no receiver addresses are entered in , the mail

cannot be sent.

On the mail creation screen, place the cursor on

the receiver field and

Select the entry

method

•

When selecting "Mail group", go to Step 3.

Changing address type : On the mail creation

screen, place the cursor on the address and

me9e

Select the address type

Deleting the added address : Place the cursor on the

address on the mail creation screen and

me8e

"Yes"

Select Address type.

Enter the address.

Deco-mail

Creating and sending Deco-mail

You can create i-mode mail by changing the text font size

or background color, or inserting a still image shot, Deco-

mail picture or Deco-mail pictograms preinstalled by

default (Deco-mail).

■

Decoration example

•

Deco-mail of 100 Kbytes or less in size can be sent. Up to

20 types of up to 90 Kbytes in total can be attached to

message text of 100 Kbytes.

•

If Deco-mail exceeding 10,000 bytes is sent to a Deco-mail

compatible i-mode terminal of a model except those

listed

below, it is received by the receiver's terminal as a mail

containing URL for viewing.

•

When Deco-mail is sent to a Deco-mail incompatible i-

mode terminal, mail containing URL is received by the

receiver's terminal. For Deco-mail exceeding 10,000 bytes

in size, terminals of some incompatible models may receive

only the text, but cannot receive viewing URLs.

✔

INFORMATION

•

This terminal supports Deco-mail, but if the receiver’s terminal

is not Deco-mail compatible, it is displayed differently at the

receiver’s terminal.

Font color/Font size

Blinking

Insert line

Ticker

Word alignment/Insert

image/Swing

Background color

F905i.book Page 122 Monday, April 21, 2008 10:53 AM

123

Mail

F905i_E2kou

◆

Entering characters after specifying

decoration

On the mail creation screen, select the

message text field

Select decoration

Enter characters

Setting multiple decorations : Place the cursor on

the icons and

Enter characters

•

Ticker, Swing and Word alignment cannot be set at

the same time.

Canceling the selected decoration and entering

characters : Place the cursor on the character

entry position and

aete

Enter characters

•

Decorations that can be canceled are Font color, Font

size, Blink, Ticker, Swing and Word alignment.

Changing a decoration :

me18e

Select

the start position

Canceling all decorations :

me19

me0e

Check the decoration

gegep

✔

INFORMATION

•

A decoration can also be selected by pressing

on a

message text entry screen and selecting "Decorate mail".

❖

Operating procedures on the decoration

selection screen of Deco-mail

◆

Specifying decoration after entering

characters

•

"Insert line", "Insert image" and "Background color" cannot

be operated. Specify decoration first and then operate

them.

➝

P172

On the mail creation screen, select the

message text field

Place the cursor on the

start position of the decoration and

Function Operating procedure/supplement

Font color Select a Font color

Enter characters

Font size Select a Font size

Enter characters

Insert image

Select the insertion source

Select a folder

Select an image

Blink Enter characters

Ticker Enter characters

Swing Enter characters

Word alignment Selecting word alignment

Enter

characters

Insert line

Lines (ruled lines) are inserted in the color

specified with (Font color).

The icon for the

decoration and

name

Cursor

Decoration selection screen

Background

color

Select Background color

Undo

Function Operating procedure/supplement

F905i.book Page 123 Monday, April 21, 2008 10:53 AM

124 Mail

F905i_E2kou

Select the end point.

Selecting from the starting position to the end of the

sentence :

meg

Selecting from the starting position to the beginning

of the sentence :

peg

Selecting the whole sentence :

Select the decoration.

Changing font color :

Select a font color

•

The color of separating line (ruled line) is also

changed.

•

To change the color back to the default, select

"Default".

Changing font size :

2e1

Blinking characters :

3e1

•

Press

to cancel.

Making characters into ticker to run from right to left

4e1

•

Press

to cancel.

Making characters swing left and right :

5e1

•

Press

to cancel.

Changing word alignment :

6e1

•

Display position of image is also changed.

Canceling all decorations in a selected range :

Copying characters :

Cutting characters :

Returning to the previous setting :

•

Last set decoration or character entry is canceled.

Decorating characters continuously :

Repeat

Step 3

Procedures for checking or canceling decoration

➝

P172

Step 2-3 in "Entering characters after specifying

decoration"

gegep

✔

INFORMATION

•

When mails are exchanged with other than the terminal

supporting Deco-mail, such as PC, the decoration may not be

correctly displayed.

Using mail templates

◆

Using template for creating a mail <Load

template>

On the mail creation screen,

me6e1

•

If the text already exceeds 10,000 bytes, "Read"

cannot be selected.

•

When selecting "Load & Insert" with the message text

decorated, a confirmation screen for canceling

decoration appears.

•

When you select "Load & Overwrite", a confirmation

screen for discarding entered contents to load

appears.

•

Icons used for the list display are defined as follows :

: Template using image with UIM operation

restriction set

: Search by i-mode

➝

P283

Definitions of icons except the above

➝

P185 "Inbox

message list screen"

•

A thumbnail image of a template appears for

thumbnail display. The icons below appear for other

than thumbnail images of template.

: Template using image with UIM operation

restriction set

: Template that an incorrect image is used

: Search by i-mode

➝

P283

•

Each time you press

, thumbnail display and list

display switch.

Select a template.

Edit the mail

◆

Viewing templates and creating mail

MENU [Mail] *

ae8e

Select a template

Edit the mail

◆

Creating and saving template <Save as

template>

•

Saving i-mode mail as a template is disabled in the cases

below :

- When total size of text and decoration data exceeds 10,000

bytes

- When the total size of text, decoration and attached file exceeds

100 Kbytes

On the mail creation screen,

me63e

"Yes"

Saving sent/received i-mode mail as template : On

the mail detail view screen,

me45

Set the required items.

Display name :

Up to 10 two-byte (20 one-byte)

characters can be entered.

File name :

Up to 36 one-byte alphanumeric characters,

" . ", " - " or " _ " can be entered. " . " cannot be used

for the first character of the file name.

F905i.book Page 124 Monday, April 21, 2008 10:53 AM

125

Mail

F905i_E2kou

✔

INFORMATION

•

If saving a template containing an image that cannot be sent as

mail, the image may be deleted.

◆

Deleting template

<Example> Deleting a template

ae8

Place the cursor on the template and

me21

Deleting selected templates :

me22e

Select templates

Deleting all templates :

me23e

Authenticate

"Yes"

Attachment (Sending)

Attaching files

You can send i-mode mail with files attached.

•

Up to 10 files of up to 2 Mbytes in total can be attached.

•

Files prohibited from attaching to mail and outputting from

the terminal (except images and melodies with "File

restricted" set for File restriction with your terminal) or files

whose function of UIM operation restriction is set cannot be

attached.

•

Attachable file types are as shown below :

When sending a JPEG image larger than 10,000 bytes to an i-mode

terminal other than the ones shown below

, it is reduced in the i-

shot Center to a size that the receiving terminal supports. A mail

with URL for image viewing is received by the terminal of the

receiver's side.

Movie/i-motion with images may be converted to continuous still

images and played depending on receiver's terminals or devices.

When sending data to i-mode terminal except the ones shown

below

, a movie recorded in CompatibleMode is recom-

mended.

➝

P138

When a receiver's terminal is an i-mode terminal of a model except

those

listed below, movies/i-motion are saved in i-motion mail

Center and the terminal receives i-mode mail containing URL for

i-motion viewing.

Sound recorded with the Sound recorder or Record voice is

attached as movie/i-motion containing only sound. i-mode termi-

nals with mova service cannot receive movies/i-motion containing

only sound.

On the mail creation screen, select the

attachment field

Select a file to attach

Selecting an image ("

Image")

✔

INFORMATION

•

Attachments not supported by the receivers' terminals may be

deleted or may not be displayed/played correctly.

•

Sending an attachment file of a certain size may take time.

◆

Changing/removing attachments

<Example> Canceling

On the mail creation screen, place the cursor on

the attachment field

"Yes"

Changing attachment :

Retry attaching

files

➝

P175

Save i-mode mail

Saving i-mode mail and sending later

◆

Saving i-mode mail

•

Maximum number of saved items

➝

P447

On the mail creation screen,

me3

i-mode mail is saved in "Unsent" folder of Unsent

messages.

File type Condition of attachment

Image

•

Only JPEG and GIF format images,

GIF animation and SWF (Flash

graphics) can be attached (created

animation cannot be attached).

Movie/i-motion/

sound

•

Only MP4 format movie/i-motion can

be attached (ASF format or partially

downloaded movie/i-motion cannot be

attached)

•

Movies/i-motion with replay restriction

set cannot be attached.

Melody

•

Only melodies in SMF or MFi format

can be attached.

Phonebook entry

Schedule data

Bookmark data

Other

•

Word, Excel or PowerPoint file can be

attached.

F905i.book Page 125 Monday, April 21, 2008 10:53 AM

126 Mail

F905i_E2kou

◆

Automatically sending mail from a place

where radio waves reach <Auto-send>

You can set so that i-mode mail created out of service area is

automatically sent when moving to a place where radio waves

reach.

•

Up to 5 mails can be registered.

On the mail creation screen,

me2

•

appears at the top of the display.

•

i-mode mail with Auto-send set is saved in "Unsent"

folder of Unsent messages.

❖

When moving to a place where radio waves

reach

Automatically sent. During automatic sending, blinks.

When transmission is complete correctly, the i-mode mail is

saved in a folder of Outbox and disappears.

•

When transmission is interrupted or failed, flashes

instead of , and the i-mode mail is saved in "Unsent"

folder of Unsent messages.

Place the cursor on i-mode mail failed in automatic sending

in Unsent messages and press

m52

to display

the reason for unsending.

•

When all of unsending mails failed in Auto-send in "Unsent"

folder are deleted through edition, cancellation, deletion or

move of such messages to a folder for Message i-

ppli or

replacement of UIM, goes off.

✔

INFORMATION

•

When failed to be sent because of out of service area, it is

resent up to 2 times.

❖

Canceling Auto-send setting

ae4e

Select a folder

Place the

cursor on the i-mode mail and

"Yes"

◆

Editing/sending sent/saved i-mode mail

ae4

Select a folder

•

For SMS, appears.

Select a mail.

Re-editing the sent mail : Place the cursor on the

mail and

Edit the mail

Quick mail

Creating mail quickly

i-mode mail and SMS can be sent by simple operation to

the parties with phonebook number 0-99 in the terminal

phonebook.

•

The destination is the first mail address for i-mode mail and

the first phone number for SMS.

<Example> Sending an i-mode mail in phonebook

number 23

Phonebook number (

)

Creating and sending i-mode mail

➝

P170

Creating SMS : Phonebook number

(1 sec. or

more)

Creating and sending SMS

➝

P205

F905i.book Page 126 Monday, April 21, 2008 10:53 AM

127

Mail

F905i_E2kou

Receive SMS

When SMS is received

•

Maximum number of saved items

➝

P447

Receive SMS.

blinks and "Receiving message..." appears.

Mail ring alert sounds, the light is lit or flashed and the

reception result screen appears.

The received SMS is saved in a folder of Inbox.

•

While receiving SMS,

: Cancel receiving

May be received depending on the receiving

conditions.

Icon

: Unread SMS exists

: Unread i-mode mail and SMS exists

Reception result ticker

Number of received SMS

•

When the terminal is folded, the sub-display shows

the caller's name or phone number.

➝

P97

•

If you do not press any key for about 15 seconds after

the reception result screen appears, the previous

screen automatically reappears.

Reading received SMS immediately : On the

reception result screen,

Select a

folder

Select SMS

•

You can reply to and/or forward received

SMS.

➝

P179

When reception has failed

" appears on the right side of "Messages" on the

reception result screen.

✔

INFORMATION

•

When multiple mails are received at the same time, the terminal

operates depending on the conditions set for the mail received

last.

•

When the memory is not enough or the maximum number of

saved items is reached, the unread or unprotected received

mails are overwritten chronologically.

•

If there is not enough storage space available because storage

is filled with unread and protected mails, reception of SMS is

stopped, or appears on the screen. To receive mails,

changing unread mail to read mail, displaying the contents of

unread mails, deleting unnecessary mails or unprotecting is

required.

•

When UIM already contains the maximum number of SMS (20),

SMS may not be received even though there is space available

in Inbox folder. At this time, or appears on the screen.

Move to the terminal or delete SMS in the UIM.

•

If received SMS has a specification to save to UIM, it is saved

directly to UIM. Note that, when the number of SMS saved in

UIM has reached 20, SMS cannot be received. Delete

unnecessary SMS.

Receiving screen Reception result screen

Blinking

F905i.book Page 127 Monday, April 21, 2008 10:53 AM

128 Mail

F905i_E2kou

Receiving and handling i-mode mail

Mail auto receive

When i-mode mail is received

•

Maximum number of saved items

➝

P447

Receive an i-mode mail.

and blink and "Receiving messages

…

" appears.

Mail ring alert sounds, the light is lit or flashed and the

reception result screen appears.

The received i-mode mail is saved in a folder of Inbox.

•g

: Cancel receiving

The mail may be received depending on the receiving

conditions.

Icon

: Unread i-mode mail exists

: Unread i-mode mail and SMS exists

Reception result ticker

Number of received i-mode mails

•

When the terminal is folded, the sub-display shows

the caller's name or mail address.

➝

P97

When reception has failed

" appears on the right side of "Mail" on the reception

result screen. To receive again, perform i-mode inquiry.

Displaying newly-received i-mode mail

On the reception result screen,

Select a folder

Select a mail

i-mode message

Checking for i-mode mail

MENU [Mail] 6

MENU [i-mode] 63

Side key [

▼

] (1 sec. or more).

Replying to i-mode mail

You can reply the received i-mode mail or SMS.

•

You cannot reply to received SMS sent from "User unset",

"Payphone" or "Not support".

ae1e

Select a folder

Place the

cursor on the mail and

Blinking

Receiving screen Reception result screen

Blinking

F905i.book Page 128 Monday, April 21, 2008 10:53 AM

129

Mail

F905i_E2kou

Using Quick reply :

The selected quick reply format is inserted before the

quoted text.

Edit the mail

Forwarding i-mode mail

i-mode mail is forwarded as i-mode mail and SMS is as

SMS.

ae1e

Select a folder

Place the

cursor on the mail to forward and

Edit the mail

F905i.book Page 129 Monday, April 21, 2008 10:53 AM

130 Mail

F905i_E2kou

Downloading Receive option attach-

ment file

You can download, display or save Receive option file

which is being or not yet downloaded.

•

When the total size of text and attachment file exceeds 100

Kbytes, a part or all of attachment file is received as a

Receive option attachment file.

•

The maximum size of each file that can be downloaded is 2

Mbytes.

ae1e

Select a folder

Select i-mode

mail with an attachment file

Select the file name.

Attachment (receiving)

Operating Auto receive attachment

files

You can display/save the file attached to an i-mode mail.

•

The files below cannot be displayed or played on this

terminal. And, they can be saved only to microSD memory

card.

- SWF (Flash graphics) exceeding 100 Kbytes

- Melody exceeding 100 Kbytes

- Multiple phonebook data

- Multiple schedule data

- Multiple bookmark data

•

Maximum number of saved items

➝

P447

•

When the maximum number of saved items/area is

reached (data in Data Box)

➝

P306

To save other than data (file) in Data Box, delete data (files)

stored in the terminal or microSD memory card.

<Example> i-mode mail with an image attached

Icon definitions

➝

P186 "Received message details screen"

◆

Displaying/saving image

ae1e

Select a folder

Select the i-

mode mail

Place the cursor on the file name of the image

and

me63

The next procedure

➝

P157 Step 2 and the following

steps in "Downloading images"

Saving image of Deco-mail :

me44e

Select the image

The next procedure

➝

P157 Step 2 and the following

steps in "Downloading images"

◆

Playing/saving i-motion from i-motion mail

ae1e

Select a folder

Select the i-

mode mail

Place the cursor on the i-motion and

me63

The next procedure

➝

P166 Step 3 in "Downloading i-

motion from sites"

Playing : Place the cursor on the i-motion and

me61

Checking the title : Place the cursor on the i-motion

and

me62

Expiration date in

i-mode Center

File icon, file name

and file size

File icon, file name

and file size

F905i.book Page 130 Monday, April 21, 2008 10:53 AM

131

Mail

F905i_E2kou

◆

Playing/saving melody

ae1e

Select a folder

Select the i-

mode mail

•

The received melody is either attached after the text

or attached in the middle of the text.

Place the cursor on the melody and

me62

The next procedure

➝

P157 Step 3 and the following

steps in "Downloading melodies"

Playing : Place the cursor on the melody and

me61

Checking the title : Place the cursor on the melody

and

me65

•

For the melody attached in the text, place the cursor

on the melody and press

m64

◆

Displaying/saving phonebook data

ae1e

Select a folder

Select the i-

mode mail

Select a phonebook data.

Displaying : Place the cursor on the phonebook data

and

me61

Checking the file name : Place the cursor on the

phonebook data and

me62

The saved phonebook data is placed in Terminal

phonebook.

•

With microSD memory card inserted, press

save to "Phonebook" folder of microSD memory card.

◆

Displaying/saving schedule data

ae1e

Select a folder

Select the i-

mode mail

Select the schedule data.

Displaying : Place the cursor on the schedule data

and

me61

Checking the file name : Place the cursor on the

schedule data and

me62

The saved schedule data is stored in Scheduler.

•

With microSD memory card inserted, press

save to "Schedule" folder of microSD memory card.

◆

Displaying/saving bookmark data

ae1e

Select a folder

Select the i-

mode mail

Select a bookmark data.

Displaying : Place the cursor on the bookmark data

and

me61

Checking the file name : Place the cursor on the

bookmark data and

me62

Enter a title name

The saved bookmark data is placed in the first folder in

Bookmark for i-mode and in the first folder in Bookmark

of Full Browser for Full Browser.

•

If saving the bookmark without entering a title, the

URL is displayed on the bookmark list.

•

With microSD memory card inserted, press

save to "Bookmark" folder of microSD memory card.

F905i.book Page 131 Monday, April 21, 2008 10:53 AM

132 Mail

F905i_E2kou

◆

Displaying/saving Word, Excel or

PowerPoint file

ae1e

Select a folder

Select the i-

mode mail

Place the cursor on the file and

me63

Displaying : Place the cursor on the file and

me61

Checking the file name : Place the cursor on the file

and

me62

Enter a display name

The saved file is placed in a folder in Other.

When there are more than one folder in Other, a screen

appears asking to select a save destination folder. The

file is saved in the selected folder.

•

When " " appears in the guide area, pressing

and

saves to "Other" folder of microSD

memory card.

✔

INFORMATION

•

If a document (Word, Excel, or PowerPoint file) is attached, it is

necessary to switch from i-mode Browser to Full Browser to

download the file.

◆

Saving various files

Save files that cannot be displayed in this terminal to microSD

memory card.

•

Data cannot be saved to or displayed to the terminal.

ae1e

Select a folder

Select the i-

mode mail

Place the cursor on the file and

me63

Checking the file name : Place the cursor on the file

and

me62

"Yes"

The files are saved in "Other" folder of microSD memory

card.

Deleting attachment

ae1e

Select a folder

Select the i-

mode mail

Place the cursor on the file and

me64

•

To delete all attached files at a time, place the cursor

on the file name and press

m65

Deleting attached melodies or Receive option

attachment files : Place the cursor on the file

name and

me63

•

To delete all attached melodies or Receive option

attachment file at a time, place the cursor on the file

name of melodies or Receive option attachment file

and

m64

"Yes"

Operating Inbox/Outbox

Inbox/Outbox

Displaying mail in Inbox/Outbox

MENU [Mail] 1

MENU [Mail] 4

MENU [Mail] 5

Received/sent/unsent i-mode mail or SMS can be

checked.

<Example> Displaying received mails

ae1

Displaying Outbox folder list :

ae5

Displaying Unsent messages folder list :

ae4

Select a folder.

•

Select a folder for Message i-

ppli to activate the

corresponding i-

ppli. To display a mail without

starting i-

ppli, place the cursor on the folder for

Message i-

ppli and press

Temp

F905i.book Page 132 Monday, April 21, 2008 10:53 AM

133

Mail

F905i_E2kou

Select a mail to display.

•

Useful functions of Mail

➝

P192

◆

Reading folder list screen

❖

Inbox folder list screen

Usage rate of the memory

Page/Total pages

Folder

(gray) : No mail

(blue) : No unread mail

: No unread mail or no mail (Secret attribute ON)

: No unread mail or no mail (used in Message i-

ppli)

: Unread mail exist

: Unread mail exist (Secret attribute ON)

: Unread mail exist (used in Message i-

ppli)

❖

Outbox/Unsent folder list screen

Page/Total pages

Folder

(gray) : No mail

(blue) : Mail exist

: Secret attribute ON

: Message i-

ppli

◆

Message list/details screen

❖

Inbox message list screen

Page/Total pages

Status icon

: Unread : Unread (unable to reply)

: Read : Read (unable to reply)

: Read (replied) : Read (forwarded)

: Protected : Protected (unable to reply)

: Protected (replied) : Protected (forwarded)

For replied and forwarded, indication priority is given to the

last operation icon.

Attachment/SMS/Notification/Message i-

ppli icon

: Image : i-motion

: Melody

: Phonebook

: Schedule data

: Bookmark data

: Word file

: Excel file

: PowerPoint file

: Files that cannot be displayed on this terminal

: Multiple files are attached

: SMS

: SMS report request, Missed call notification or Notify

recorded message

: Message to be used in Message i-

ppli

: i-

ppli To

: A file is attached

Sender

When saved in the phonebook, the name is displayed.

Reception date and time

The time is displayed on the reception day and the date is

displayed on other than the reception day.

F905i.book Page 133 Monday, April 21, 2008 10:53 AM

134 Mail

F905i_E2kou

Subject

Message

•

For SMS sent from an overseas sender, the sender

address is preceded by "+".

•

For i-mode mail or SMS received while staying overseas

(except GMT+08:00), may appear succeeding the

receiving date and time.

❖

Outbox/Unsent messages list screen

Page/Total pages

Status icon

No icon : Unprotected

: Protected

: Auto-send set

: Failed in Auto-send

: Protected + Auto-send set

: Protected + failed in Auto-send

Attachment/SMS/Message i-

ppli icon

➝

P185 "Inbox message list screen"

Receiver

Sent/Saved date & time

Subject

For SMS, the beginning of the message is displayed.

❖

Received message details screen

Address type icon

: Receiver ( and only for i-mode mail)

Status/Notification icon

➝

P185 "Inbox message list screen"

Types of attachment/SMS icon

Types of attachment

: Image : i-motion

: Melody

: Phonebook

: Schedule data

: Bookmark data

: Word file

: Excel file

: PowerPoint file

: Files that cannot be displayed on this terminal

: Multiple files are attached

: i-

ppli (i-

ppli To)

: Invalid data attached

Depending on the conditions of attachment files, icons below

appear in addition to those above.

: Copyrighted (Mail attachment or output from the

terminal disabled)

/ : Data error/Data exceeded

: Receive option attachment file not yet downloaded

: Receive option attachment file being downloaded

: Downloading of Receive option attachment file disabled

SMS icon

: SMS

: SMS (combined SMS)

: SMS (SMS being combined)

: SMS (combined SMS in an incomplete status)

Mail No./No. of msgs

Reception date and time

Address type of Sender's/Broadcast address

: Sender : Sender (unable to reply)

: Receiver (only for i-mode mail)

: Receiver (unable to reply) (only for i-mode mail)

Subject

•

For i-mode mail or SMS received while staying overseas

(except GMT+08:00), may appear succeeding the

receiving date and time.

✔

INFORMATION

For SMS being combined/combined SMS in an incomplete status,

will be displayed for the part that has been cut off and not

been received.

❖

Zooming in/out display of mails<Quick zoom>

In received message list view screen and received message

detail view screen, message can be zoomed up/down at 15

levels.

•

The operations below can be performed.

: Zoom in/out

: Initial screen reappears

: Scroll (only for list screens)

•

When displaying key operation list, press

on any

screen, and select "Display"

➝

"Key function help".

F905i.book Page 134 Monday, April 21, 2008 10:53 AM

Fujitsu OS-F905I Cellular Phone User Manual F905i

Fujitsu Limited Cellular Phone F905i

Contents

Manual Part 1 3

Navigation menu

Namespaces

Views

Navigation