Furuno USA 9ZWFM8900S GMDSS VHF User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1778063
Application ID	d4uD0AXggfo1DYRu8sEWyQ==
Document Description	usermanual part 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	305.81kB (3822579 bits)
Date Submitted	2012-08-29 00:00:00
Date Available	2012-10-25 00:00:00
Creation Date	2012-08-29 16:18:25
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-08-29 16:18:45
Document Title	untitled
Document Creator	FrameMaker 7.2

5. MENU OPERATION
Rotate the CHANNEL/ENTER knob to select [AUDIO] on the [MENU] screen then
push the knob.
Default: [2]
Turn beep on (setting: [1] - [3])
or off (setting: [0]) when a key
is pressed.
Default: [MUTE]
Turn the speaker on or off
when the handset is off hook.
Turn the speakers except in-use one on or off.
[PUBLIC]: On, [PRIVATE]: Off
Default: [OFF]
Adjust tone quality for speaker.
5.20
Rotate the CHANNEL/ENTER knob to set volume
then push the knob.
Alarm Lists
The [ALARM] menu shows all currently violated alarms. When an error occurs, a popup message and a flashing error icon appear on the screen. Press the CANCEL key
to close the pop-up message and stop the flashing of the error icon. When the error is
removed, the error icon disappears.
Rotate the CHANNEL/ENTER knob to select [ALARM] on the [MENU] screen then
push the knob. The following screen appears.
Error icon
There are three kinds of errors: [TX PLL UNLOCK], [RX PLL UNLOCK], [DSC PLL
UNLOCK].
Errors are displayed in the order shown above, not in the order of occurrence. An error
is deleted from the list when the cause for the error is removed.
These alarms are listed when the following messages appear.
5-21
5. MENU OPERATION
This page is intentionally left blank.
5-22
6.
REMOTE HANDSET
6.1
Controls
LCD
Keyboard
HG-8900(-W)
Handset hanger
HS-8900(-W)
Remote handset
Remote station RB-8900(-W) (option)
Description of controls for remote station (handset)
Control
DW key
HI/LO key
CH16 key
SCAN key
S, T keys
SQ key
VOL key
ENTER key
CANCEL key
key
Function
Turns the DW function on or off (see section 1.9).
Changes the output power to high (25 W) or low (1 W).
Switches to the RT (radiotelephone) screen and sets CH16.
Turns the scan function on or off (see section 1.10).
• Selects the menu items.
• Selects the channel on the RT screen.
• Adjusts the setting values.
Adjusts the squelch. Press the SQ key on the RT/OCCUPIED screen then
press the S or T key within three seconds to adjust the squelch (setting
range: AUTO, 0 to 10). To get auto squelch adjustment, press the T key
with the setting 0 (indication: SQA).
Adjusts the volume. Press the VOL key on the RT/OCCUPIED screen then
press the S or T key within three seconds to adjust the volume (setting
range: 0 to 10).
• Moves down one layer when you save the menu option in a layer other
than the lowest one. In the undermost layer, opens the setting window.
• Confirms a selection.
• Silences the audio alarm.
• Returns one layer in a multi-layer menu. In the top layer, closes the menu
then displays the RT screen.
• Cancels the setting in the setting window then goes back one layer in the
menu.
• Cancels the intercom call.
Turns the loudspeaker on or off.
6-1
6. REMOTE HANDSET
Control
MENU key
0 to 9 keys
Function
Opens/closes the menu.
• Enters the channel on the RT screen.
• Selects the menu items.
Short press: Opens the contrast setup screen. Press the S or T key to
adjust the contrast.
Long press (more than three seconds): Restores the contrast to the default setting.
Opens the brill setup screen. Press the S or T key to adjust the brill. You
can also use the BRILL key.
CONTRAST key
BRILL key
6.2
How to Turn On/Off the Power
A handset does not have a power key. Turn on or off the power from the transceiver
unit.
6.3
Radiotelephone (RT) Screen
Below are the radiotelephone (RT) screens on the remote handset.
10
Common RT screen
DW screen
Scan screen
When no terminal has operation right and a remote handset is off hook,
the following screen appears.
A remote handset can get the
operation right if you hook on
then hook off.
No.
Meaning
RX signal strength (This icon does not appear while transmitting.)
Output power ([HI]: High, [LO]: Low)
Channel type ([SIMP]: Simplex, [DUP]: Duplex)
Spinner rotates when the equipment is functioning normally.
Channel region ([INT’L], [USA], [CANADA], [INLAND-W], [PRIVATE])
Channel
Loudspeaker on (
10
Volume for loudspeaker (0 to 10)
Squelch level (0 to 10, AUTO (Indication is [SQA].))
Terminal ID ([L]: Left wing handset, [R]: Right wing handset, [1] to [4]: Remote handset 1 to 4)
6-2
) or off (
6. REMOTE HANDSET
6.4
How to Adjust the Brilliance and Contrast
You can adjust the brilliance of the display and the panel for each remote handset separately. Also, you can adjust the contrast for each remote handset.
Brilliance
1. Press the BRILL key to show the [BRILL] setting window.
2. Press the S or T key to adjust the brilliance.
3. Press the ENTER key to save the settings and close the
window. To cancel the settings, press the CANCEL key instead of the ENTER key to close the window.
Note: The [BRILL] setting window automatically closes when there is no menu operation for three seconds.
Contrast
1. Press the CONTRAST key to show the [CONTRAST] setting window.
2. Press the S or T key to adjust the contrast.
3. Press the ENTER key to save the settings and close the
window. To cancel the settings, press the CANCEL key instead of the ENTER key to close the window.
Note: The [CONTRAST] setting window automatically closes when there is no menu
operation for three seconds.
6.5
How to Select the Channel Region, Channel
Channel region
1. Press the MENU key to open the [MENU] screen.
2. Press the S or T key to select [REGION] then press the
ENTER key.
3. Press the S or T key to select the channel mode desired then press the ENTER
key. The following modes are available.
•
•
•
•
•
[INT’L]: International mode
[USA]: USA mode
[CANADA]: CANADA mode
[INLAND-W]: Inland waterway mode
[PRIVATE]: Private channel
6-3
6. REMOTE HANDSET
Note 1: Only permitted channel regions are displayed, which are set by the installer of the equipment.
Note 2: Private channels are available only where permitted by the authorities.
The [USA], [CANADA], [INLAND-W], [PRIVATE] can also be set by a qualified
service technician.
Channel
The channel can be set manually on the RT screen. Enter the channel by one of the
methods below.
Enter channel with the S or T key:
Press the S or T key on the RT screen.
Enter channel with the numeric keys:
Use the numeric keys to enter channel on the RT screen. (It is not necessary to press
the ENTER key after entering the channel; the setting is confirmed one second after
it is entered.)
Note: When the transceiver unit is in on hook condition, you can change the channel
with the remote handset.
Memory channel
You can easily call up a channel which you registered in the transceiver unit as a memory channel (see section 5.4).
1. Press the MENU key to open the [MENU] screen.
2. Press the S or T key to select [MEMORY CH] then press the ENTER key.
3. Press the S or T key to select [ON] or [OFF] then press the ENTER key.
When you select [ON], "M" appears on the screen. On the RT screen, you can select a memory channel by pressing the S or T key. The following figure shows
the example for CH 10.
“3” means that you turned 3
channels of the selected
channel region to [ON] in
the [MEMORY CONFIG]
menu in the transceiver unit.
6.6
Channel number
Transmission
How to transmit
Press the PTT (Push-to-talk) switch on the handset to talk, and release it to listen for
a response. "TX" appears at the top left-hand corner of the screen during transmission.
How to change the output power
Press the HI/LO key to change the
output power to high and low alternately. "HI" or "LO" appears on the
screen depending on your selection.
6-4
6. REMOTE HANDSET
6.7
How to Turn On/Off the Loudspeaker
You can turn the loudspeaker (other than DSC communication, error, and key beep)
on or off.
1. Press the SPK key to alternately disable or enable the loudspeaker.
Speaker ON
Speaker OFF
2. To adjust the volume of the loudspeaker, press the VOL key. The screen changes
as below.
Reverse highlighting
3. Press the S or T key to adjust the volume within three seconds. The time for reverse highlighting is three seconds.
6.8
Quick Selection of CH16
Press the CH16 key to select CH16. The CH16 (156.8 MHz) is the international frequency for distress traffic and for calling by radiotelephone. The CH16 can also be
used by ship stations for call and reply. To facilitate the reception of distress calls and
distress traffic, all transmissions on CH16 should be kept to a minimum and should not
exceed one minute. Before transmitting on the CH16, a station should listen on this
frequency for a reasonable period to make sure that no distress traffic is being sent.
6.9
Intercom
The built-in intercom permits voice communications between two control units. The
combination of two controls is transceiver unit & remote handset, or remote handset
& remote handset.
Calling
You can call over the intercom only in off hook condition.
1. Press the MENU key to open the [MENU] screen.
2. Press the S or T key to select [INTERCOM] then press
the ENTER key.
3. Press the S or T key to select the called party’s control
unit then press the ENTER key.
The called party’s control unit and yours ring.
To cancel calling, press the CANCEL key.
6-5
6. REMOTE HANDSET
4. When the called party picks up their handset, the screen
as shown in the right figure appears. Start communications.
Note: You do not have to press the PTT switch to communicate.
5. Hang up the handset or press the CANCEL or the CH16 key to turn the intercom
off. The RT screen appears.
Answering
1. The control unit rings and the following screen appears. To cancel reply, press the
CANCEL key.
Off hook condition
On hook condition
2. Press the ENTER key with off hook condition or pick up the handset with on hook
condition to start communications.
3. Hang up the handset or press the CANCEL key to turn the intercom off. The RT
screen appears.
Earpiece volume
You can adjust the volume of the earpiece during intercom communication by pressing
the S or T key. After intercom communication, the earpiece volume is reverted to the
setting value you set on [EARPIECE LEVEL] (see section 6.11).
Note: Neither key click nor key error sounds during intercom communication.
6.10
How to Change the Terminal ID
1. Turn off the remote handset by the transceiver unit.
2. While you hold the MENU key, turn on the remote handset by the transceiver unit.
The setting window for terminal ID appears.
3. Enter the terminal ID, using the 1 to 6 keys, then press the ENTER key. Do not
assign the same number to multiple remote stations.
Note: Restart the remote handset by the transceiver unit after changing terminal ID.
6.11
Audio setting
The [AUDIO] menu enables or disables key beep and adjusts the volume of the earpiece and off hook loudspeaker.
Key click
1. Press the MENU key to open the [MENU] screen.
6-6
6. REMOTE HANDSET
2. Press the S or T key to select [AUDIO] then press the ENTER key.
3. Press the S or T key to select [KEY CLICK VOLUME] then
press the ENTER key.
4. Press the S or T key to set the key click level (setting range: 0 (OFF), 1, 2 or 3).
5. Press the ENTER key. To cancel the setting, press the CANCEL key.
Earpiece volume
1. Press the MENU key to open the [MENU] screen.
2. Press the S or T key to select [AUDIO] then press the ENTER key.
3. Press the S or T key to select [EARPIECE LEVEL] then
press the ENTER key.
Note: Neither key click nor key error sounds during the
[EARPIECE LEVEL] display.
4. Press the S or T key to set the earpiece volume level (setting range: 1 to 3).
5. Press the ENTER key. To cancel the setting, press the CANCEL key.
Off hook loudspeaker
You can set the loudspeaker on or off according to off hook condition.
1. Press the MENU key to open the [MENU] screen.
2. Press the S or T key to select [AUDIO] then press the ENTER key.
3. Press the S or T key to select [OFF HOOK SPEAKER]
then press the ENTER key.
4. Press the S or T key to select [SP_ON] or [MUTE].
[SP_ON]: Loudspeaker is activated when off hook.
[MUTE]: Loudspeaker is deactivated when off hook.
5. Press the ENTER key. To cancel the setting, press the CANCEL key.
6-7
6. REMOTE HANDSET
6.12
How to Test FM-8900S from a Remote Handset
1. Press the MENU key to open the [MENU] screen.
2. Press the S or T key to select [DAILY TEST] then press
the ENTER key.
3. Press the ENTER key to start the test. You can confirm the test results for FM8900S with the 1 or 3 key.
These items are displayed
only when entering own
ship’s MMSI.
This item is not displayed when
there is no alarm unit.
Press the 3 key for the next page and the 1 key for the previous page.
6.13
How to Display the Program Versions
1. Press the MENU key to open the [MENU] screen.
2. Press the S or T key to select [VERSION] then press the ENTER key. The program versions for FM-8900S and HS-8900 appear.
6.14
Squelch
• The squelch value is common to all remote handsets. If you change a squelch value
for a remote handset, squelch values for all other remote handsets are changed accordingly.
• You can not change a squelch value for a remote handset while the squelch is being
adjusted by another remote handset.
• When the DW or scan is active, the squelch value from the terminal (transceiver unit
or remote handset) that initiated the DW or scan is used.
6-8
7.
MAINTENANCE &
TROUBLESHOOTING
NOTICE
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
7.1
Do not apply paint, anti-corrosive sealant
or contact spray to plastic parts or
equipment coating.
Those items contain products that can
damage plastic parts and equipment coating.
Daily Test
Do the daily test to check the radiotelephone for proper operation.
Rotate the CHANNEL/ENTER knob to select [TEST] on the [MENU] screen then push
the knob. The daily test starts. After the test is completed, the audio alarm sounds and
the screen shown below appears. This screen shows:
• Test date
• Program version number
• Test results for TX power, TX PLL, RX PLL, DSC PLL, DSC loopback, DSC routine,
ROM, RAM, RTC, DSP, FPGA and alarm unit (only when connecting the alarm
unit), shown as [OK] or [NG] (No Good). For NG, contact your dealer for advice. The
DSC test checks, using a DSC signal, the encode and decode functions of the signal processor.
xx
These items are not
available when not entering own ship’s MMSI.
This item is not available
when not connecting the
alarm unit.
To print out the test result manually, press the 5 key. Automatic printing of the daily
test is available. See section 5.5.
7-1
7. MAINTENANCE & TROUBLESHOOTING
7.2
Maintenance
Regular maintenance helps to keep your equipment in good condition and prevents
future problems. Check the items shown in the table below.
Item
Antenna
Wire
antenna
Insulators
for antenna
Transceiver
unit
Power
supply
Power fuse
7.3
Check point
Check for physical damage and corrosion.
Check that the antenna is properly spanned
and separated sufficiently from metallic
structures.
Check for salt water deposits on insulators.
Check that connection at the lead-in insulator is tight and rust-free.
Remedy/Remarks
Replace damaged parts.
If necessary, re-span antenna.
Check that the supply voltage at transmission is within the rated range (21.6 to 31.2
VDC at the power connector).
Check if a power fuse (7A) has blown.
If not within the range, check power
source. Low voltage may cause erratic
operation.
If the fuse has blown, find out the cause
before replacing it (Type: FGBO 125V
7A PBF). If it blows after replacement,
contact your dealer.
Replace damaged insulator(s). Remove
salt water deposits. Clean with fresh
water, then dry. Remove rust, then
tighten bolts and lock nuts. Cover metallic surface with sealing compound.
• Check ground connection.
• Tighten the loosened connections;
remove foreign materials from con• Check connection at signal cable, coaxial
nectors.
cable, control cable, power cable and external equipment (including navigator).
• Remove any objects.
• Confirm that there are no objects on the • Wipe the LCD carefully to prevent
top of the transceiver unit.
scratching, using tissue paper and an
• Remove dust from transceiver unit with
LCD cleaner. To remove dirt or salt
deposits, use an LCD cleaner, wiping
soft cloth.
slowly with tissue paper so as to disNote: Do not use chemical cleaners to
clean the transceiver unit; they can remove
solve the dirt or salt. Change paper
frequently so the salt or dirt does not
paint or markings and deform the equipscratch the LCD.
ment.
Simple Troubleshooting
The table below provides possible problems and the means with which to restore normal operation. If normal operation cannot be restored, do not attempt to check inside
the equipment. Any servicing should be referred to a qualified technician.
Problem
Power cannot be
turned on.
Display indications
do not appear.
Power is on but no
sound from the main
speaker.
Output power reduced to LOW
7-2
Probable cause
• Mains switchboard is off.
• (DC) voltage is too high or too low.
• Battery has discharged, or poor
contact at terminals.
Display brilliance is too low.
Remedy
• Turn on the mains switchboard.
• Check supply voltage.
• Recharge the battery and tighten
the battery terminals.
Press the BRILL key to adjust the
display brilliance.
Main speaker is off.
Press the
speaker.
key to turn on the main
Power is automatically reduced to pro- Wait until the unit cools.
tect against overheating due to continuous transmission.
7. MAINTENANCE & TROUBLESHOOTING
7.4
Warning and Caution Messages
The table below shows error messages, their meanings, and remedies. To delete the
messages, press the CANCEL key.
Message
Meaning
TX PLL unlock. Transmission is disabled.
Remedy
Contact your dealer.
TX PLL unlock error. Transmission is
disabled.
Contact your dealer.
RX PLL unlock. Reception is disabled.
Contact your dealer.
DSC (CH70) PLL unlock.
Contact your dealer.
Position data is not input for ten min- Enter the position.
utes.
Note: This message does not appear when [INPUT TYPE] in the [POSITION] menu is set to [MANUAL].
Position data has not been updated
for 4H.
Enter the position.
Position data has not been updated
for 23.5H.
Enter the position.
You tried to send a DSC message
but your MMSI has not been registered in the equipment.
Enter MMSI no. of
your ship.
Printer trouble. Cannot print.
Check the printer
(connection, power,
paper).
Communication between the transceiver unit and a remote handset is
lost for three seconds.
Check the connection
with the remote handset. If unsolved, contact your dealer.
7-3
7. MAINTENANCE & TROUBLESHOOTING
Message
7.5
Meaning
RF amplifier is too hot. Transmission
power is reduced.
Remedy
Allow the transceiver
unit to cool. If the message appears again,
contact your dealer.
Internal error. System is rebooted.
System automatically
restarts. If the problem
occurs again, contact
your dealer.
Test Call
This function sends a test signal to a coast or ship station. For that reason, it should
not be executed unnecessarily. You can prepare a test call beforehand (see
paragraph 5.14.5).
1. Press the OTHER DSC MSG key to open the [COMPOSE MESSAGE].
2. Rotate the CHANNEL/ENTER knob to select [MSG TYPE] then push the knob.
3. Rotate the CHANNEL/ENTER knob to select [TEST MSG] then push the knob.
[PRIORITY] is automatically set to [SAFETY].
4. With [TO] selected, push the CHANNEL/ENTER knob.
5. Rotate the CHANNEL/ENTER knob to select [DIRECT INPUT], [ADDRESS
BOOK DATA] or [AIS TARGET DATA] then push the knob.
[DIRECT INPUT]: Enter the MMSI of the station where to send the call then push
the CHANNEL/ENTER knob.
[ADDRESS BOOK DATA]: Select an MMSI from the [ADDRESS BOOK] (see
section 5.13) then push the CHANNEL/ENTER knob.
[AIS TARGET DATA]: Select an MMSI from the [AIS TARGET LIST] then push
the CHANNEL/ENTER knob.
6. With [GO TO CALL] selected, push the CHANNEL/ENTER knob to send the test
message. The screen is changed to the one for transmission. After the call is sent,
the equipment waits for acknowledgement of the call. The timer starts counting up
the time to wait for acknowledgement.
7. Do one of the following.
Test acknowledge message received
The audio alarm sounds and the message "TEST ACK received! [CANCEL]: Stop
alarm" appears. Press the CANCEL key to silence the alarm.
No response
Re-send call: Rotate the CHANNEL/ENTER knob to select [RESEND] in the user options area then push the knob.
Cancel call: Rotate the CHANNEL/ENTER
knob to select [QUIT] in the user options
area then push the knob. The message
shown in the right figure appears.
Rotate the CHANNEL/ENTER knob to select [Yes] then push the knob.
7-4
APPENDIX 1 MENU TREE
Transceiver unit FM-8900S
MENU key
Bold: Default setting
HS VOL (1 - 20, 15)
TEST
INTERCOM
CH MODE
REGION (INT’L, USA, CANADA, INLAND-W*, PRIVATE)
MEMORY (ON, OFF)
MEMORY CONFIG (Open memory config window)
SYSTEM
PRINT
DSC
ADDRESS BOOK (Open address data list)
MSG FILE (Open message file list)
LOG (Open log data list)
ACK SETTINGS
INDIVIDUAL (MANUAL, AUTO (UNABLE))
PSTN (AUTO (ABLE), AUTO (UNABLE))
REASON (NO REASON, BUSY, EQUIP ERROR,
CAN'T USE MODE, CAN'T USE CH)
POSITION MSG (AUTO (ABLE),
AUTO (UNABLE), MANUAL)
POLLING MSG (AUTO, MANUAL)
TEST MSG (AUTO, MANUAL)
SPECIAL MSG
NEUTRAL (ABLE, UNABLE)
MEDICAL (ABLE, UNABLE)
PROPOSE CH
INT’L (01 - 88)
USA (01 - 88)
CANADA (01 - 88)
INLAND-W* (01 - 88)
PRIVATE (CH16 and a max. of 19 other channels
selected in the [SERVICE] menu.)
MMSI X10*
X10 (0 - 9; 0)
MODE (ZERO, NON-ZERO, REJECT)
AUDIO
KEY CLICK (0 - 3; 2)
OFF HOOK SP (SP ON, MUTE)
MONITOR DOMAIN
REGULAR (PUBLIC, PRIVATE)
PSTN (PUBLIC, PRIVATE)
ORDINARY ALARM
SAFETY (0 - 5; 5)
ROUTINE (0 - 5; 5)
EQUALIZER (OFF, CLEAR, MILD, SHARP)
TX MSG (AUTO, MANUAL)
*: These menu items appear
RX MSG (AUTO, MANUAL)
according to the settings
DAILY TEST (AUTO, MANUAL)
of the [SERVICE] menu.
POSITION (Open setting window)
DATE/TIME (Open setting window)
MENU END (10MIN, NO TIMEOUT)
TIMEOUT
DSC GENERAL (15MIN, NO TIMEOUT)
RX DISTRESS (15MIN, NO TIMEOUT)
TELEPHONE (10SEC, 30SEC, 10MIN)
INTERCOM NAME (Open intercom name editting screen)
AUTO REVERT
MAIN (RT+DSC, RT, OFF)
REMOTE (ON, OFF)
URGENCY (ON, OFF)
EXTERNAL ALARM
SAFETY (ON, OFF)
ROUTINE (ON, OFF)
RT APPLICATION (GUIDE, HS STATE, SQ METER)
ALARM (Open alarm list)
SERVICE (For service technician)
AP-1
APPENDIX 1 MENU TREE
Remote handset HS-8900(-W)
MENU key
Bold: Default setting
REGION (INT’L, USA, CANADA, INLAND-W*, PRIVATE)
MEMORY CH (ON, OFF)
INTERCOM
AUDIO
KEY CLICK VOLUME (0 (OFF) - 3, 2)
EARPIECE LEVEL (1 - 3, 3)
OFF HOOK SPEAKER (SP_ON, MUTE)
DAILY TEST (Display the test results for FM-8900S)
VERSION (Display the program versions for FM-8900S and HS-8900)
*: This menu item appears according to the setting
of the [SERVICE] menu in the FM-8900S.
AP-2
APPENDIX 2 MARINE VHF CHANNEL
LISTS
International channels
CH
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
TX (MHz)
156.050
156.100
156.150
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
156.900
156.950
157.000
157.050
157.100
157.150
157.200
157.250
157.300
157.350
157.400
RX (MHz)
160.650
160.700
160.750
160.800
160.850
156.300
160.950
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
161.500
161.550
161.600
161.650
161.700
161.750
161.800
161.850
161.900
161.950
162.000
Remark
CH
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
TX (MHz)
156.025
156.075
156.125
156.175
156.225
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.775
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
157.225
157.275
157.325
157.375
157.425
RX (MHz)
160.625
160.675
160.725
160.775
160.825
160.875
160.925
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.775
156.825
156.875
161.525
161.575
161.625
161.675
161.725
161.775
161.825
161.875
161.925
157.375
157.425
Remark
DSC
Low PWR
Low PWR
AP-3
APPENDIX 2 MARINE VHF CHANNEL LISTS
USA channels
CH
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
TX (MHz)
156.050
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.800
156.850
156.900
156.950
157.000
157.050
157.100
157.150
157.200
157.250
157.300
157.350
157.400
RX (MHz)
156.050
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
156.900
156.950
157.000
157.050
157.100
157.150
161.800
161.850
161.900
161.950
162.000
Remark
Low PWR
CH
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
TX (MHz)
156.175
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.775
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
157.225
157.275
157.325
157.375
157.425
*: USCG (United States Coast Guard) only (General use prohibited)
USA weather channels
WX
01
02
03
04
05
AP-4
RX (MHz)
162.550
162.400
162.475
162.425
162.450
WX
06
07
08
09
10
RX (MHz)
162.500
162.525
161.650
161.775
163.275
RX (MHz)
156.175
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.775
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
161.825
161.875
161.925
157.375
157.425
Remark
Low PWR
DSC
Low PWR
Low PWR
Low PWR
Low PWR
APPENDIX 2 MARINE VHF CHANNEL LISTS
Canadian channels
CH
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
TX (MHz)
156.050
156.100
156.150
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
156.900
156.950
157.000
157.050
157.100
157.150
157.200
157.250
157.300
157.350
157.400
RX (MHz)
160.650
160.700
160.750
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
156.900
156.950
161.600
157.050
157.100
161.750
161.800
161.850
161.900
161.950
162.000
Remark
Low PWR
Low PWR
Low PWR
**
CH
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
TX (MHz)
156.025
156.075
156.125
156.175
156.225
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.775
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
157.225
157.275
157.325
157.375
157.425
RX (MHz)
160.625
156.075
156.125
156.175
160.825
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.775
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
161.825
161.875
161.925
157.375
157.425
Remark
DSC
Low PWR
Low PWR
*: DFO/Canadian Coast Guard only
**: For communications between the Coast Guard and non-Coast Guard stations only
Canadian weather channels
WX
01
02
03
04
05
RX (MHz)
162.550
162.400
162.475
162.425
162.450
WX
06
07
08
09
10
RX (MHz)
162.500
162.525
161.650
161.775
163.275
AP-5
APPENDIX 2 MARINE VHF CHANNEL LISTS
Inland waterways (INLAND-W) channels
CH
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
AP-6
TX (MHz)
156.050
156.100
156.150
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
156.900
156.950
157.000
157.050
157.100
157.150
157.200
157.250
157.300
157.350
157.400
RX (MHz)
160.650
160.700
160.750
160.800
160.850
156.300
160.950
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
161.500
161.550
161.600
161.650
161.700
161.750
161.800
161.850
161.900
161.950
162.000
Remark
Low PWR
Low PWR
Low PWR
Low PWR
Low PWR
Low PWR
Low PWR
Low PWR
Low PWR
CH
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
TX (MHz)
156.025
156.075
156.125
156.175
156.225
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.775
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
157.225
157.275
157.325
157.375
157.425
RX (MHz)
160.625
160.675
160.725
160.775
160.825
160.875
160.925
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.775
156.825
156.875
161.525
161.575
161.625
161.675
161.725
161.775
161.825
161.875
161.925
157.375
157.425
Remark
DSC
Low PWR
Low PWR
Low PWR
Low PWR
Low PWR
Low PWR
APPENDIX 2 MARINE VHF CHANNEL LISTS
Private channels
TX (MHz)
Simplex/Semi-duplex
155.000
155.025
155.050
155.075
155.100
155.125
155.150
155.175
155.200
155.225
155.250
155.275
155.300
155.325
155.350
155.375
155.400
155.425
155.450
155.475
155.500
155.525
155.550
155.575
155.600
155.625
155.650
155.675
155.700
155.725
155.750
155.775
155.800
155.825
155.850
155.875
155.900
155.925
155.950
155.975
Simplex
155.000
155.025
155.050
155.075
155.100
155.125
155.150
155.175
155.200
155.225
155.250
155.275
155.300
155.325
155.350
155.375
155.400
155.425
155.450
155.475
155.500
155.525
155.550
155.575
155.600
155.625
155.650
155.675
155.700
155.725
155.750
155.775
155.800
155.825
155.850
155.875
155.900
155.925
155.950
155.975
RX (MHz)
Semi-duplex
159.600
159.625
159.650
159.675
159.700
159.725
159.750
159.775
159.800
159.825
159.850
159.875
159.900
159.925
159.950
159.975
160.000
160.025
160.050
160.075
160.100
160.125
160.150
160.175
160.200
160.225
160.250
160.275
160.300
160.325
160.350
160.375
160.400
160.425
160.450
160.475
160.500
160.525
160.550
160.575
CH no. (current)
Remark
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
120(L1)
121(L2)
122
123
124
125(F1)(P1)
126(L3)
127
128
129
130
131(F2)(P2)
132
133(F3)(P3)
134
135
136
137
138
139
- Continued -
AP-7
APPENDIX 2 MARINE VHF CHANNEL LISTS
TX (MHz)
Simplex/Semi-duplex
156.000
156.025
156.050
156.075
156.100
156.125
156.150
156.175
156.200
156.225
156.250
156.275
156.300
156.325
156.350
156.375
156.400
156.425
156.450
156.475
156.500
156.525
156.550
156.575
156.600
156.625
156.650
156.675
156.700
156.725
156.750
156.775
156.800
156.825
156.850
156.875
156.900
156.925
156.950
156.975
157.000
157.025
157.050
157.075
157.100
Simplex
156.000
156.025
156.050
156.075
156.100
156.125
156.150
156.175
156.200
156.225
156.250
156.275
156.300
156.325
156.350
156.375
156.400
156.425
156.450
156.475
156.500
156.525
156.550
156.575
156.600
156.625
156.650
156.675
156.700
156.725
156.750
156.775
156.800
156.825
156.850
156.875
156.900
156.925
156.950
156.975
157.000
157.025
157.050
157.075
157.100
RX (MHz)
Semi-duplex
160.600
160.625
160.650
160.675
160.700
160.725
160.750
160.775
160.800
160.825
160.850
160.875
160.900
160.925
160.950
160.975
161.000
161.025
161.050
161.075
161.100
161.125
161.150
161.175
161.200
161.225
161.250
161.275
161.300
161.325
161.350
161.375
161.400
161.425
161.450
161.475
161.500
161.525
161.550
161.575
161.600
161.625
161.650
161.675
161.700
CH no. (current)
00
60
01
61
02
62
03
63
04
64
05
65
06
66
07
67
08
68
09
69
10
70
11
71
12
72
13
73
14
74
15
75
16
76
17
77
18
78
19
79
20
80
21
81
22
- Continued -
AP-8
Remark
APPENDIX 2 MARINE VHF CHANNEL LISTS
TX (MHz)
Simplex/Semi-duplex
157.125
157.150
157.175
157.200
157.225
157.250
157.275
157.300
157.325
157.350
157.375
157.400
157.425
157.450
157.475
157.500
157.525
157.550
157.575
157.600
157.625
157.650
157.675
157.700
157.725
157.750
157.775
157.800
157.825
157.850
157.875
157.900
157.925
157.950
157.975
158.000
158.025
158.050
158.075
158.100
158.125
158.150
158.175
158.200
158.225
158.250
Simplex
157.125
157.150
157.175
157.200
157.225
157.250
157.275
157.300
157.325
157.350
157.375
157.400
157.425
157.450
157.475
157.500
157.525
157.550
157.575
157.600
157.625
157.650
157.675
157.700
157.725
157.750
157.775
157.800
157.825
157.850
157.875
157.900
157.925
157.950
157.975
158.000
158.025
158.050
158.075
158.100
158.125
158.150
158.175
158.200
158.225
158.250
RX (MHz)
Semi-duplex
161.725
161.750
161.775
161.800
161.825
161.850
161.875
161.900
161.925
161.950
161.975
162.000
162.025
162.050
162.075
162.100
162.125
162.150
162.175
162.200
162.225
162.250
162.275
162.300
162.325
162.350
162.375
162.400
162.425
162.450
162.475
162.500
162.525
162.550
162.575
162.600
162.625
162.650
162.675
162.700
162.725
162.750
162.775
162.800
162.825
162.850
CH no. (current)
Remark
82
23
83
24
84
25
85
26
86
27
87
28
88
29
89
30
90
31
91
32
92
33
93
34
94
35
95
36
96
37(M1)
97
38
98
39
99
40
100
41
101
42
102
43
103
44
104
45
- Continued -
AP-9
APPENDIX 2 MARINE VHF CHANNEL LISTS
TX (MHz)
Simplex/Semi-duplex
158.275
158.300
158.325
158.350
158.375
158.400
158.425
158.450
158.475
158.500
158.525
158.550
158.575
158.600
158.625
158.650
158.675
158.700
158.725
158.750
158.775
158.800
158.825
158.850
158.875
158.900
158.925
158.950
158.975
159.000
159.025
159.050
159.075
159.100
159.125
159.150
159.175
159.200
159.225
159.250
159.275
159.300
159.325
159.350
159.375
159.400
Simplex
158.275
158.300
158.325
158.350
158.375
158.400
158.425
158.450
158.475
158.500
158.525
158.550
158.575
158.600
158.625
158.650
158.675
158.700
158.725
158.750
158.775
158.800
158.825
158.850
158.875
158.900
158.925
158.950
158.975
159.000
159.025
159.050
159.075
159.100
159.125
159.150
159.175
159.200
159.225
159.250
159.275
159.300
159.325
159.350
159.375
159.400
RX (MHz)
Semi-duplex
162.875
162.900
162.925
162.950
162.975
163.000
163.025
163.050
163.075
163.100
163.125
163.150
163.175
163.200
163.225
163.250
163.275
163.300
163.325
163.350
163.375
163.400
163.425
163.450
163.475
163.500
163.525
163.550
163.575
163.600
163.625
163.650
163.675
163.700
163.725
163.750
163.775
163.800
163.825
163.850
163.875
163.900
163.925
163.950
163.975
164.000
CH no. (current)
105
46
106
47
107
48
108
49
109
50
110
51
111
52
112
53
113
54
114
55
115
56
116
57
117
58
118
59
119
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
- Continued -
AP-10
Remark
APPENDIX 2 MARINE VHF CHANNEL LISTS
TX (MHz)
Simplex/Semi-duplex
159.425
159.450
159.475
159.500
159.525
159.550
159.575
159.600
159.625
159.650
159.675
159.700
159.725
159.750
159.775
159.800
159.825
159.850
159.875
159.900
159.925
159.950
159.975
160.000
160.025
160.050
160.075
160.100
160.125
160.150
160.175
160.200
160.225
160.250
160.275
160.300
160.325
160.350
160.375
160.400
160.425
160.450
160.475
160.500
160.525
160.550
Simplex
159.425
159.450
159.475
159.500
159.525
159.550
159.575
159.600
159.625
159.650
159.675
159.700
159.725
159.750
159.775
159.800
159.825
159.850
159.875
159.900
159.925
159.950
159.975
160.000
160.025
160.050
160.075
160.100
160.125
160.150
160.175
160.200
160.225
160.250
160.275
160.300
160.325
160.350
160.375
160.400
160.425
160.450
160.475
160.500
160.525
160.550
RX (MHz)
Semi-duplex
164.025
164.050
164.075
164.100
164.125
164.150
164.175
164.200
CH no. (current)
Remark
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
140
141
142
- Continued -
AP-11
APPENDIX 2 MARINE VHF CHANNEL LISTS
TX (MHz)
Simplex/Semi-duplex
160.575
160.600
160.625
160.650
160.675
160.700
160.725
160.750
160.775
160.800
160.825
160.850
160.875
160.900
160.925
160.950
160.975
161.000
161.025
161.050
161.075
161.100
161.125
161.150
161.175
161.200
161.225
161.250
161.275
161.300
161.325
161.350
161.375
161.400
161.425
161.450
161.475
AP-12
RX (MHz)
Simplex
Semi-duplex
160.575
160.600
160.625
160.650
160.675
160.700
160.725
160.750
160.775
160.800
160.825
160.850
160.875
160.900
160.925
160.950
160.975
161.000
161.025
161.050
161.075
161.100
161.125
161.150
161.175
161.200
161.225
161.250
161.275
161.300
161.325
161.350
161.375
161.400
161.425
161.450
161.475
CH no. (current)
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177(M2)
178
179
Remark
APPENDIX 3 ABBREVIATIONS LIST
Abbreviations
Abbreviation
ACK
AIS
ALARM
ANT
APP
APR
AUG
AUTO
BRILL
CAN’T
Term
Acknowledge
Automatic Identification System
Alarm
Antenna
Application
April
August
Automatic
Brilliance
Cannot
Abbreviation
LAT
LO
LOG
LON
LV
MAR
MEM
MENU
MIN
MMSI
CH
COMM
CPU
DATE
DEC
DSC
DSP
DUP
DW
ECC
Channel
Communication
Central Processing Unit
Date
December
Digital Selective Calling
Digital Signal Processor
Duplex
Dual Watch
East
Error Correction Code
MSG
MUTE
NAV
NG
NOV
OCT
OFF
ON
PLL
PSTN
ENT
EPFS
EQUIP
FEB
FPGA
Enter
Electronic Position Fixing System
Equipment
February
Field Programmable Gate
Array
Frequency
Global Maritime Distress and
Safety System
Global Navigation Satellite System
High
Handset
Information
Inland Waterway
Integrated Navigation System
Intercommunication System
International
January
July
June
PWR
RAM
REF
RF
ROM
Term
Latitude
Low
Log
Longitude
Level
March
Memory
Menu
Minute(s)
Maritime Mobile Services
Identity
Message
Mute
North
Navigation
No Good
November
October
Off
On
Phase Locked Loop
Public Switched Telephone
Network
Power
Random Access Memory
Reference
Radio Frequency
Read Only Memory
RT
RTC
Radiotelephone
Real Time Clock
RX
Receive
S-DUP
SEC
SEP
SIMP
SP
SQ
TIME
TRX
TX
USA
Semi-Duplex
Second(s)
September
Simplex
Speaker
Squelch
Time
Transmit and Receive
Transmit
United States of America
FREQ
GMDSS
GNSS
HI
HS
INFO
INLAND-W
INS
INTERCOM
INT’L
JAN
JUL
JUN
AP-13
APPENDIX 3 ABBREVIATIONS LIST
Abbreviation
UTC
VDR
Term
Coordinated Universal Time/ Universal Time, Coordinated
Voyage Data Recorder
Abbreviation
VOL
Term
Volume
WR
Watchkeeping Receiver
Icons
Icon
Meaning
Speaker ON
Icon
Speaker OFF
CHANNEL/ENTER knob
Unread message
Name of the ship registered in
address book
Name of the ship registered in
AIS target list
Data is being updated regularly.
Auto ACK for individual message is ON.
Radio field intensity on the
RT screen
AIS
Radio field intensity on the
screens except the RT
screen
Send a distress alert of your
ship.
Unsolved error
• Receive a distress alert
from a ship in distress.
• Send a distress relay on
behalf of a ship in distress.
Send a general (safety, urgency or routine) message.
Channel region is INT’L.
Receive a general (safety,
urgency or routine) message.
Communicate via radiotelephone
Channel region is WX.
Equalizer mode is on.
Channel region is INLAND-W.
Output power is high.
Channel region is PRIVATE.
Output power is low.
Channel region is MEMORY.
Simplex frequency
Dual watching
Duplex frequency
Scanning
Distress frequency
Squelch is opened.
Transmitting
Channel region is USA.
Channel region is CANADA.
BUSY
AP-14
Meaning
Number keys
APPENDIX 4 DIGITAL INTERFACE
(IEC 61162-1)
I/O Sentences
Input sentences (IEC 61162-1)
GGA, GLL, ZDA, GNS, RMC, VDM
Input sentence description
• GGA - Global positioning system (GPS) fix data
$**GGA,hhmmss.ss,llll.lll,a,yyyyy.yy,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx*hh
2 3
5 6 7 8 9 10 11 12 13 14
1. UTC of position (000000.00 - 235959.99)
2. Latitude (0000.0000 - 9000.0000)
3. N/S
4. Longitude (00000.0000 - 18000.0000)
5. E/W
6. GPS quality indicator (1 - 5)
7. Number of satllite in use (no use)
8. Horizontal dilution of precision (no use)
9. Antenna altitude above/below mean sealevel (no use)
10. Unit, m
11. Geoidal separation (no use)
12. Unit, m
13. Age of differential GPS data (no use)
14. Differential reference station ID (no use)
• GLL - Geographic position - latitude/longitude
$**GLL,llll.ll,a,yyyyy.yy,a,hhmmss.ss,a,x*hh
67
1 2
1. Latitude (0000.0000 - 9000.0000)
2. N/S
3. Longitude (00000.0000 - 18000.0000)
4. E/W
5. UTC of position (000000.00 - 235959.99)
6. Status (A=data valid V=data invalid)
7. Mode indicator (A=Autonomous D=Differential
N=No fix S=Simulator mode
• ZDA - Time and date
$**ZDA,hhmmss.ss,xx,xx,xxxx,xx,xx*hh
2 3 4 5 6
1. UTC (000000.00 - 235959.99)
2. Day (01 - 31)
3. Month (01 -12)
4. Year (2000 - 2049)
5. Local zone, hours (no use)
6. Loca zone, minutes (no use)
AP-15
APPENDIX 4 DIGITAL INTERFACE (IEC 61162-1)
• GNS - GNSS fix data
$**GNS,hhmmss.ss,llll.ll,a,yyyyy.yy,a,c--c,xx,x.x,x.x,x.x,x.x,x.x,a*hh
5 6 7 8 9 10 11 12 13
2 3 4
1. UTC of position (000000.00 - 235959.99)
2. Latitude (0000.0000 - 9000.0000)
3. N/S
4. Longitude (00000.0000 - 18000.0000)
5. E/W
6. Mode indicator
N=No fix A=Autonomous D=Differential P=Precise R=Real Time Kinematic
F=Float RTK S=Simulator Mode
7. Total number of satellites in use (00 - 99)
8. HDOP (no use)
9. Antenna altitude, meters (no use)
10. Geoidal separation (no use)
11. Age of differential data (no use)
12. Differential reference station ID (no use)
13. Navigational status indicator (S=Safe C=Caution U=Unsafe V=Navigational status not valid)
• RMC - Recommended minimum specific GNSS data
$**RMC,hhmmss.ss,A,llll.ll,a,yyyyy.yy,a,x.x,x.x,ddmmyy,x.x,a,a,a*hh
2 3 4
6 7 8
10 11 12 13
1. UTC of position fix (000000.00 - 235959.99)
2. Status (A=data valid, V=navigation receiver warning)
3. Latitude (0000.0000 - 9000.0000)
4. N/S
5. Longitude (00000.0000 - 18000.0000)
6. E/W
7. Speed over ground, knots (no use)
8. Course over ground, degrees true (no use)
9. Date (010100 - 311249)
10. Magnetic variation, degrees (no use)
11. E/W
12. Mode indicator (A= Autonomous D= Differential
F=Float RTK N=No fix P=Precise R=Real time kinematic S= Simulator mode
13. Navigational status indicator (S=Safe C=Caution U=Unsafe V=Navigational status not valid)
• VDM - UAIS VHF data-link message
$**VDM,x,x,x,a,s--s,x,*hh
1234 5 6
1. Total number of sentences needed to transfer the message (1 to 9)
2. Message sentence number (1 to 9)
3. Sequential message identifier (0 to 9, NULL)
4. AIS channel Number (A or B)
5. Encapsulated ITU-R M.1371 radio message (1 - 63 bytes)
6. Number of fill-bits (0 to 5)
AP-16
APPENDIX 4 DIGITAL INTERFACE (IEC 61162-1)
Output sentences (IEC 61162-1)
DSC, DSE, TLL
Output sentence description
• DSC - Digital selective calling information
$CVDSC,xx,xxxxxxxxxx,xx,xx,xx,x.x,x.x,xxxxxxxxxx,xx,a,a*hh
3 4 5 6 7
9 10 11
1. Format specifier (2 digits)
2. Address (10 digits)
3. Category (2 digits or NULL)
4. Nature of Distress or first telecommand (2 digits or NULL)
5. Type of Communication or second telecommand (2 digits)
6. Position or Channel /Frequency (Max. 12 digits)
7. Time or Tel. No. (Max. 16 digits)
8. MMSI of ship in distress (10 digits or NULL)
9. Nature of distress (2 digits or NULL)
10. Acknowledgement (R=Acknowledge request B=Acknowledgement S=Neither (end of sequence)
11. Expansion indicator (E or NULL)
• DSE - Expanded digital selective calling
$CVDSE,x,x,a,xxxxxxxxxx,xx,c--c,..........,xx,c--c*hh
123
5 6
7 8 9
1. Total number of sentences (fixed value)
2. Sentence number (fixed value)
3. Query/reply flag (fixed value A=Automatic)
4. Vessel MMSI (10 digits)
5. Data set ‘1’ (code field, fixed value 00)
6. Data set ‘1’ (data field, Enhanced position resolution, Max. 8 characters), NULL
7. Additional data sets , NULL
8. Data set ‘n’ (NULL)
9. Data set ‘n’ (NULL)
*: This equipment outputs only “Data set 1”.
• TLL - Target latitude and longitude
$CVTLL,xx,llll.ll,a,yyyyy.yy,a,c--c,hhmmss.ss,a,a*hh
1 2 3
5 6
89
1. Target number, NULL
2. Latitude (0.0000 - 9000.0000)
3. N/S
4. Longitude (0.0000 - 18000.0000)
5. E/W
6. Target name, NULL
7. UTC of data (000000 - 235959)
8. Target status, NULL
9. Reference target, NULL
AP-17
APPENDIX 4 DIGITAL INTERFACE (IEC 61162-1)
P - sentences
pireq, pidat, CVdmr, CVdma
P - sentence description
• PFEC,pireq - Equipment information request
$ PFEC, pireq, sentence
When this sentence is input, the equipment outputs the PFEC,pidat sentence.
• PFEC,pidat - Equipment information
$ PFEC, pidat, sentence
• PFEC,CVdmr - Digital selective call Message call Request
$ PFEC, CVdmr, sentence
• PFEC,CVdma - Digital selective call Message call Acknowledgement
$ PFEC, CVdma, sentence
Schematic diagram
MAIN
05P0843
[GNSS_SIO] Input only
10
+3.3V
+3.3V
5 PC400
AP-18
100p
0.1µ
2.2k
GNSS_IN
(Not mount) J1
JUNCTION
100
1SS272
1SS272
21
330
10
1000p
GNSS_RD-H
22 GNSS_RD-C
1000p
APPENDIX 4 DIGITAL INTERFACE (IEC 61162-1)
+3.3V
[MULTI_SIO]
0.1µ
RS422_RXD
10
120
0.5W
VCC
A8
2R
B7
22
RS422_TXD
10
Y5
3D
10
Z6
GND
J17
4 SN65HVD30DR
RS-422
IEC61162-1
(default)
Z_149_3P
10
100px4
J18
RS-422
IEC61162-1
(default)
Z_149_3P
+3.3V
(Not mount)
2.2k
10
+3.3V
0.1µ
5 PC400
330
1SS272
NMEA_RXD
1SS272
100p
100
J1 JUNCTION
MULTI_TD-A
13
MULTI_TD-B
14
MULTI_RD-A
15
MULTI_RD-B
16
Load requirements as a listener
Isolation: Optocoupler
Input impedance: 430Ω
Max. voltage: ±15 V
Threshold: 4 mA
AP-19
APPENDIX 5 PARTS LIST
This equipment contains complex modules in which fault diagnosis and repair down to component
level are not practical (IMO A.694(17)/8.3.1). Only some discrete components are used. FURUNO
Electric Co., Ltd. Believes identifying these components is of no value for shipboard maintenance;
therefore, they are not listed in this manual. Major modules can be located on the parts location
photos on pages AP-21 thru AP-22.
Transceiver Unit FM-8900S
ELECTRICAL PARTS LIST
Unit Transceiver Unit FM-8900S
Code No.
PRINTED CIRCUIT BOARD
05P0843, MAIN
05P0841, TRX_WR
05P0849, PWR
05P0882, PANEL
Handset HS-2003
ELECTRICAL PARTS LIST
Unit
PRINTED CIRCUIT BOARD
Handset HS-2003
Code No.
05P0780, HANDSET
Remote Handset HS-8900(-W)
ELECTRICAL PARTS LIST
Unit
Remote Handset HS-8900(-W)
Code No.
PRINTED CIRCUIT BOARD
05P0781B, HS CONT
05P0715, KEY
Remote Handset Hanger HG-8900(-W)
ELECTRICAL PARTS LIST
Unit
Remote Handset Hanger HG-8900(-W)
Code No.
PRINTED CIRCUIT BOARD
05P0798, TB
Junction Box IF-8900
ELECTRICAL PARTS LIST
PRINTED CIRCUIT BOARD
05P0850, JUNCTION
AP-20
Unit
Junction Box IF-8900
Code No.
APPENDIX 6 PARTS LOCATION
Transceiver unit FM-8900S
05P0849
PWR
05P0843
MAIN
05P0841
TRX_WR
Top cover removed
Bottom cover removed
05P0882
PANEL
Back side of front panel
Handset HS-2003
05P0780
HANDSET
AP-21
APPENDIX 6 PARTS LOCATION
Remote station RB-8900 (HS-8900, HG-8900) / RB-8900-W (HS-8900-W, HG-8900-W)
(Rear side)
05P0798
TB
(Hanger)
HG-8900
HG-8900-W
(Handset)
05P0781B
HS CONT
05P0715
KEY
HS-8900
HS-8900-W
Junction box IF-8900
TB5
(ANALOG
WING(LEFT)/VDR)
TB1
TB7
(REMOTE1)
(ALARM SYSTEM/
TB3
INS/AIS/PLOTTER)
(REMOTE3)
05P0850
JUNCTION
Lug for connection
of shield of
TTYCSLA cables
TB4
(REMOTE 4)
TB8
(ALARM UNIT)
TB2
(REMOTE 2)
TB6
(ANALOG WING(RIGHT)/GNSS)
AP-22
FURUNO
FM-8900S
SPECIFICATIONS OF MARINE VHF RADIOTELEPHONE
FM-8900S
1.1
GENERAL
Number of channels
INTL: 57
USA: 50
Weather: 10
Canada: 57
INLAND-WA: 57
Private: 20
Memory CH: 50
1.2
Frequency stability
Within ±1.5kHz
1.3
Communication system Simplex/Semi-duplex
1.4
Class of emission
16K0G3E (F3E) Voice, 16K0G2B (F2B) DSC
1.5
Antenna impedance
50 ohms
1.6
Display
4.3-inch color dot matrix LCD, 480 x 272 dots
1.7
Visible distance
0.7 m nominal
2.1
2.2
2.3
TRANSMITTER
Frequency range
Output power
Frequency deviation
3.1
RECEIVER
Frequency range
155.000 to 161.475 MHz
25W max., 1W at power reduction
Within ±5 kHz
Simplex: 155.000 to 161.475 MHz
Semi-duplex: 159.600 to 164.200 MHz
3.2
Receiving system
Double superheterodyne
3.3
Intermediate frequency
1st: 51.1375 MHz, 2nd: 62.5 kHz
3.4
Sensitivity
+6 dBμV or less (20 dB SINAD)
3.5
Channel selectivity
70 dB or more
3.6
Spurious response
70 dB or more
3.7
AF output
Built-In speaker: 3W (4 ohms, THD: within 10%),
Handset earpiece: 2mW (150 ohms)
4.1
4.2
4.3
4.4
DSC
Protocol
Rec. ITU-R M.541-9, M.493-13 (class A), M.689-2
Baud rate
1200 baud ±30 ppm max.
Modulation
AFSK
Frequency of modulation 1700 ±400 Hz, Mark: 1300 Hz, Space: 2100 Hz
5.1
5.2
CH70 WATCH KEEPING RECEIVER
Receiving frequency
156.525 MHz
Receiving system
Double superheterodyne
SP - 1
E5680S01E
FURUNO
FM-8900S
5.3
Intermediate frequency
1st: 38.3625 MHz, 2nd: 37.5 kHz
5.4
Sensitivity
0 dBμV or less (SER<1%)
5.5
Channel selectivity
70 dB or more
5.6
Spurious response
70 dB or more
6.1
INTERFACE
Navigation data
Input sentences
Output sentences
IEC61162-1 Ed.4(2010-11)
GGA, GLL, GNS, RMC, VDM, ZDA
DSC, DSE, TLL
7.1
7.2
POWER SUPPLY
Power voltage
24 VDC (-10%, +30%)
Power consumption (with all options)
Transmit
4.7A max. at 25W output
Receive
2.3A max. at 4W audio output
Waiting
1.3A max.
8.1
8.2
8.3
8.4
ENVIRONMENTAL CONDITION
Ambient temperature
-15°C to +55°C
Relative humidity
93% or less at +40°C
Degree of protection
Transceiver unit (FM-8900S) IP20 (IP22: option)
Handset/Hanger (HS-2003/FP05-05510)
IP24
Remote station
RB-8900: IP22, RB-8900-W: IP56
Junction box
IP20, IP22 (bulkhead mount, option)
Vibration
IEC 60945 Ed.4
9.1
9.2
9.3
COATING COLOR
Transceiver unit
N2.5 (fixed)
Remote station/ handset N2.5 (fixed)
VHF console
7.5BG7/2, 2.5G7/2 or specified
SP - 2
E5680S01E
INDEX
Abbreviation ..........................................AP-13
Address book
deleting...................................................5-11
editing.....................................................5-10
list.............................................................5-8
registration ...............................................5-9
Alarm lists ................................................5-21
All ships message
receiving.................................................4-12
sending...................................................4-11
Audio alarms ..............................................2-2
Auto ACK setting......................................5-19
Brilliance
remote handset ........................................6-3
transceiver unit.........................................1-3
Channel region...........................................5-2
remote handset ........................................6-3
transceiver unit.........................................1-3
Channel selection
remote handset ........................................6-4
transceiver unit.........................................1-4
Contrast (remote handset) .........................6-3
Control description
remote handset ........................................6-1
transceiver unit.........................................1-1
Daily test ....................................................7-1
Date and time setting .................................5-5
Digital interface .....................................AP-15
Distress alert
canceling ................................................3-13
receiving...................................................3-4
sending.....................................................3-1
Distress relay
receiving.................................................3-13
sending...................................................3-10
DSC messages ..........................................2-1
Dual channels (DW) ...................................1-5
Error message ...........................................7-3
External alarm setting ................................5-7
Group message
receiving...................................................4-7
sending.....................................................4-6
Group message preparation ....................5-14
Icon .......................................................AP-14
IN-1
Individual message
receiving...................................................4-4
sending.....................................................4-1
Individual message preparation ...............5-13
Intercom ............................................. 1-8, 6-5
Log file
deleting...................................................5-18
opening ..................................................5-17
Maintenance ..............................................7-2
Medical message
receiving.................................................4-19
sending...................................................4-18
Memory channel calling up
remote handset ........................................6-4
transceiver unit.........................................5-2
Memory configuration.................................5-3
MENU screen open/close ..........................5-1
Menu tree ................................................AP-1
Neutral message
receiving.................................................4-17
sending...................................................4-16
Parst list ................................................AP-20
Parst location ........................................AP-21
Polling request message..........................4-15
Position message
receiving.................................................4-15
sending...................................................4-13
Position setting...........................................5-4
Power on/off
remote handset ........................................6-2
transceiver unit.........................................1-2
Printing message .......................................5-4
Priority ........................................................1-7
Propose channel ......................................5-20
PSTN message
receiving.................................................4-10
sending.....................................................4-8
PSTN message preparation.....................5-15
Replay function ........................................1-12
RT application setting.................................5-8
RT screen
remote handset ........................................6-2
transceiver unit.........................................1-2
Scanning channels.....................................1-6
Session ......................................................1-9
INDEX
Sound setting
remote handset ....................................... 6-6
transceiver unit ...................................... 5-20
Speaker
remote handset ....................................... 6-5
transceiver unit ........................................ 1-5
Special message..................................... 5-20
Test call..................................................... 7-4
Test message preparation ...................... 5-15
Timeout setting.......................................... 5-5
Transmission
remote handset ....................................... 6-4
transceiver unit ........................................ 1-4
Troubleshooting ........................................ 7-2
VHF channel lists ....................................AP-3
IN-2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2012:08:29 16:18:25-07:00
Creator                         : FrameMaker 7.2
Modify Date                     : 2012:08:29 16:18:45-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:08:29 16:18:45-07:00
Creator Tool                    : FrameMaker 7.2
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:b457440d-5629-46fd-915f-2b25a74c3fe2
Instance ID                     : uuid:e7eb98b9-d66f-407e-b0dd-7896c349ad95
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 40

EXIF Metadata provided by EXIF.tools