Gainspan GS1500M LOW POWER WI-FI MODULE User Manual GS1011 Data sheet
Gainspan Corporation LOW POWER WI-FI MODULE GS1011 Data sheet
Gainspan >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1581899 |
| Application ID | zHhKDcm1aVExMNBiT9t87Q== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 104.89kB (1311099 bits) |
| Date Submitted | 2011-11-16 00:00:00 |
| Date Available | 2011-11-17 00:00:00 |
| Creation Date | 2011-10-11 11:41:03 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2011-11-04 10:10:39 |
| Document Title | GS1011 Data sheet |
| Document Creator | Acrobat PDFMaker 9.1 for Word |
| Document Author: | Ravi Subramanian / Daniel M. Dobkin |
GS1500M LOW-POWER WIRELESS SYSTEM-ON-CHIP WI-FI MODULE DATA SHEET - USER MANUAL USER'S MANUAL USER MANUAL P R ELI MI N AR Y R ELEAS E GainSpan Confidential Information Reference: GS1500M-DS Version: SP-0.1 Date: 11-Oct-11 GS1500M DATA SHEET Information in this document is provided in connection with GainSpan products. No license, express or implied, to any intellectual property rights is granted by this document. GainSpan assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of GainSpan products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. GainSpan products are not authorized for use as critical components in medical, life saving, or life-sustaining applications GainSpan may make changes to specifications and product descriptions at any time, without notice. *Other names and brands may be claimed as the property of others. Copyright © 2011 by GainSpan Corporation All Rights Reserved. GainSpan Corporation 125 South Market Street, Suite 400 San Jose, CA 95113 U.S.A. +1 (408) 673-2900 info@GainSpan.com www.GainSpan.com Version Date 0.1 12-Apr-11 PRELIMINARY Remarks Initial Release GAINSPAN CONFIDENTIAL PAGE 2 OF 43 GS1500M DATA SHEET Table of Contents 1.1 1.2 Overview ................................................................................................................................. 7 Document Overview........................................................................................................... 7 Product Overview ............................................................................................................... 7 Architecture ............................................................................................................................. 9 2.1 G1500M Block Diagram .................................................................................................... 9 2.2 Block Diagram Description ................................................................................................ 9 2.2.1 Overview ....................................................................................................................... 9 2.2.2 Wireless LAN and System Control Subsystem........................................................... 10 2.2.3 Network Services Subsystem ...................................................................................... 10 2.2.3.1 APP CPU ............................................................................................................... 10 2.2.4 Memory Subsystem..................................................................................................... 10 2.2.4.1 Overview ................................................................................................................ 10 2.2.5 Clock Circuitries ......................................................................................................... 11 2.2.5.1 Real Time Clock (RTC) ......................................................................................... 11 2.2.5.2 Overview ................................................................................................................ 11 2.2.5.3 Real Time Counter ................................................................................................. 12 2.2.5.4 RTC Outputs .......................................................................................................... 12 2.2.5.4.1 DC_DC_CNTL .................................................................................................. 13 2.2.5.4.2 RTC_OUT1........................................................................................................ 13 2.2.5.5 RTC Alarm Inputs 1 and 2 ..................................................................................... 13 2.3 Peripherals ........................................................................................................................ 13 2.3.1 SPI ............................................................................................................................... 13 2.3.2 I2C ............................................................................................................................... 14 2.3.3 UART .......................................................................................................................... 15 2.3.4 JTAG ........................................................................................................................... 15 2.3.5 GPIO & LED Driver / GPIO ....................................................................................... 16 2.3.6 ADC ............................................................................................................................ 16 2.4 System States .................................................................................................................... 17 Pin-out and Signal Description .............................................................................................. 19 3.1 GS1500M Device Pin-out Diagram (Module top view) .................................................. 19 3.1.1 GS1500M Module Pins Description ........................................................................... 20 Electrical Characteristics ....................................................................................................... 24 4.1 Absolute Maximum Ratings ............................................................................................. 24 4.2 Operating Conditions ....................................................................................................... 24 4.3 Internal 1.8V regulator ..................................................................................................... 24 4.4 I/O DC Specifications ...................................................................................................... 25 4.4.1 Digital Input Specifications......................................................................................... 25 4.4.2 Digital Output Specification ....................................................................................... 25 4.4.3 I/O Digital Specifications (Tri-State) .......................................................................... 25 4.4.4 RTC Input Specifications (with Schmitt Trigger) ....................................................... 26 4.4.5 RTC Output Specifications ......................................................................................... 26 4.5 Power Consumption (estimated) ...................................................................................... 27 4.6 Radio Parameters .............................................................................................................. 27 4.7 ADC Parameters ............................................................................................................... 28 4.8 SPI Interface Timing ........................................................................................................ 29 4.8.1 Motorola SPI, clock polarity SPO = 0, clock phase SPH = 0 ..................................... 29 4.8.2 Motorola SPI, clock polarity SPO = 0, clock phase SPH = 1 ..................................... 31 PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 3 OF 43 GS1500M DATA SHEET 4.8.3 Motorola SPI, clock polarity SPO = 1, clock phase SPH = 0 ..................................... 33 4.8.4 Motorola SPI, clock polarity SPO = 1, clock phase SPH = 1 ..................................... 35 4.9 Electrostatic discharge (ESD) .......................................................................................... 36 5.1 Package and Layout Guidelines ............................................................................................ 37 GS1500M Recommended PCB Footprint and Dimensions ............................................. 37 Ordering Information ............................................................................................................. 39 Regulatory Notes ................................................................................................................... 40 Limitations ............................................................................................................................. 42 References ............................................................................................................................. 43 PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 4 OF 43 GS1500M DATA SHEET Figures Figure 2-1: GS1500M Block Diagram ........................................................................................................ 9 Figure 2-2: RTC Interface Diagram .......................................................................................................... 12 Figure 2-3: GS1500M System States ........................................................................................................ 17 Figure 3-1: GS1500M Device Pin-out Diagram (Module top view) ......................................................... 19 Figure 3-2: Module pin connection diagram ............................................................................................. 23 Figure 4-1: timing diagram, Master mode, SPO=SPH=0......................................................................... 29 Figure 4-2: timing diagram, Slave mode, SPO=SPH=0. .......................................................................... 30 Figure 4-3: timing diagram, Master, SPO=0, SPH=1................................................................................ 31 Figure 4-4: timing diagram, Slave, SPO=0, SPH=1. ................................................................................. 32 Figure 4-5: timing diagram, Master mode, SPO=1, SPH=0...................................................................... 33 Figure 4-6: timing diagram, Slave mode, SPO=1, SPH=0. ....................................................................... 34 Figure 4-7: timing diagram, Master mode, SPO=SPH=1.......................................................................... 35 Figure 4-8: timing diagram, Slave mode, SPO=SPH=1. ........................................................................... 36 Figure 5-1: GS1500M Module Recommended PCB Footprint (dimensions are in inches) ..................... 37 Figure 5-2: GS1500M Module Dimensions (in inches) ........................................................................... 38 PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 5 OF 43 GS1500M DATA SHEET Tables Table 3-1: Signal Description .................................................................................................................... 22 Table 4-1: Absolute Maximum Ratings .................................................................................................... 24 Table 4-2: Operating Conditions ............................................................................................................... 24 Table 4-3: Internal 1.8V Regulator ........................................................................................................... 24 Table 4-4: Digital Input Parameters .......................................................................................................... 25 Table 4-5: Digital Output Parameters........................................................................................................ 25 Table 4-6: I/O Digital Parameters ............................................................................................................. 26 Table 4-7: RTC Input Parameters.............................................................................................................. 26 Table 4-8: RTC Output Parameters ........................................................................................................... 26 Table 4-9: Power Consumption in Different States................................................................................... 27 Table 4-10: Radio Parameters ................................................................................................................... 27 Table 4-11: ADC Parameters .................................................................................................................... 28 Table 4-12: timing parameters, Master mode, SPO=SPH=0. ................................................................... 29 Table 4-13: timing parameters, Slave mode, SPO=SPH=0. ..................................................................... 30 Table 4-14: timing parameters, Master mode; SPO=0, SPH=1. ............................................................... 31 Table 4-15: timing parameters, Slave mode, SPO=0, SPH=1. .................................................................. 32 Table 4-16: timing parameters, Master mode, SPO=1, SPH=0................................................................ 33 Table 4-17: timing parameters, Slave mode, SPO=1, SPH=0. .................................................................. 34 Table 4-18: timing parameters, Master mode, SPO=SPH=1. ................................................................... 35 Table 4-19: timing parameters, Master mode, SPO=SPH=1. ................................................................... 36 PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 6 OF 43 GS1500M DATA SHEET 1 Overview 1.1 Document Overview the GS1500M Low Power module hardware specification. The GS1500M Tmodule providesdescribes a cost effective, low power, and flexible platform to add Wi-Fi® connectivity for HIS DOCUMENT embedded devices for a variety of applications, such as wireless sensors and thermostats. It combines ARM7-based processors with an RF transceiver, 802.11 MAC, security, & PHY functions, FLASH and SRAM, onboard and off module certified antenna options, and various RF front end options for end customer range needs in order to provide a WiFi and regulatory certified IEEE 802.11 radio with concurrent application processing services for variety of applications, while leverage existing 802.11 [1] wireless network infrastructures. 1.2 Product Overview ► Family of modules with different antenna and output power options: • • GS1500M 1.450 inches by 0.900 inches by 0.143 inches (Length * Width * Height) 48-pin Dual Flat pack PCB Surface Mount Package. Simple API for embedded markets covering large areas of applications ► Compliant with IEEE 802.11and regulatory domains: • • • Fully compatible with IEEE 802.11b/g/n. o DSSS modulation for data rate of 1 Mb/s and 2 Mb/s; CCK modulation rates of 5.5 and 11 Mb/s. o OFDM modulation for data rates of 6, 9, 12, 18, 24, 36, 48 and 54 Mb/s. o 802.11n 1x1 HT20 for data rates of MCS0 – 7. Supports short preamble and short slot times. WiFi Certified Solution o Supports 802.11i security WPA™ - Enterprise, Personal WPA2™ - Enterprise, Personal Vendor EAP Type(s) • EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAPGTC, EAP-FAST, EAP-TLS Hardware encryption/decryption engines for WEP, WPA/WPA2 (AES and TKIP) RoHS and CE compliant • FCC/IC Certified - TBD • • ► Dual ARM7 Processor Platform: • • • • 1st ARM7 processor (WLAN CPU) for WLAN software 2nd ARM7 (APP CPU) for networking software Based on Advanced Microprocessor Bus Architecture (AMBA) system: o AMBA High-Speed Bus (AHB). o AMBA Peripheral Bus (APB). On-chip WLAN boot code located in dedicated boot ROM. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 7 OF 43 GS1500M DATA SHEET ► Interfaces: • • • • • • • • • • PCB or external antenna options. Two general-purpose SPI interfaces (each configurable as master or slave) for external sensors, memory, or external CPU interface; one interface may be configured as a high-speed Slave-only. Two multi-purpose UART interfaces. Up to 23 configure able general purpose I/Os. Single 3.3V supply option o I/O supply voltage 1.8 ~ 3.3V option One PWM output I2C master/slave interface. Two 10-bit ADC channels, aggregate sample rate 32 kS/s. Two alarm inputs to asynchronously awaken the chip. Support of up to two control outputs for power supply and sensors. ► Embedded RTC (Real Time Clock) can run directly from battery. ► Power supply monitoring capability. ► Low-power mode operations ► Sleep and Deep Sleep PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 8 OF 43 GS1500M DATA SHEET 2 Architecture 2.1 G1500M Block Diagram Figure 2-1: GS1500M Block Diagram 2.2 Block Diagram Description 2.2.1 Overview GS1500M module is an integrated ultra low power Wi-Fi system-on-chip (SOC) that contains the following: • • The module includes: a highly integrated IEEE 802.11b/g/n WLAN chip, which contains a MAC, baseband, security and radio functions in a single package a GS1011 Chip, which contains two ARM7-based processors (one dedicated to Networking services, and the other dedicated to Wireless services), on-chip flash memory and SRAM in a single package The module carries an 802.11b/g/n radio with onboard 32 KHz & 44 MHz crystal circuitries, RF, and certified PCB antenna or external antenna options. • The module has a capability of +15dBm output power at the antenna (see Figure 2-1). Variety of interfaces are available such as two UART blocks using only two data lines per port with optional hardware flow controls, two SPI block (one dedicated as a serial slave with configurable hardware interrupt to the HOST), I2C with Master or slave operation, JTAG port, PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 9 OF 43 GS1500M DATA SHEET low-power 10-bit ADC capable of running at up to 32 KSamples/sec., GPIO’s, and LED Drivers/GPIO with 20mA capabilities. • GS1500M contains single power supply (VIN_3V3) with optional module controlled external regulator enable control pin (DC_DC_CNTL), a separate I/O supply (VDDIO) that can be tied to the HOST supply rail without the use of external voltage translators, Real Time Clock (RTC) with battery supply monitor option (VBAT), and two external alarm inputs enable wake-up of the system on external events & outputs (ALARM and RTC_OUT) to enable periodic wake-up of the remainder of the system. The Module carries onboard single supply monitor for under voltage supply and onboard 1.8V regulator with enable/disable capabilities for power critical applications. 2.2.2 Wireless LAN and System Control Subsystem The GS1011 Wireless LAN and system control subsystem consists of an ARM7 TDMI-S CPU providing system control functions which provides for control and management functions of the external 802.11b/g/n WLAN chip. 2.2.3 Network Services Subsystem 2.2.3.1 APP CPU The Network services subsystem consists of an APP CPU which is based on an ARM7 TDMI-S core. It incorporates an AHB interface and a JTAG debug interface. The network RTOS, network stack, and customer application code can reside on this CPU. For more information, consult the GS1011 Peripheral and Register Description [2] and GS1011 IC data sheet [3] for detailed descriptions. 2.2.4 Memory Subsystem 2.2.4.1 Overview The GS1011 Chip contains several memory blocks: ► Boot ROM blocks. ► The software contained in this ROM provides the capability to download new firmware via the SPI Slave or UART interfaces and to control the update of WLAN and APP Flash Memory. ► 384 Kbytes of Embedded Flash to store program code. ► Three embedded Flash blocks of 128K bytes each ► WLAN Flash (contains the wireless LAN and system control subsystem software) ► APP Flash 0 and 1 (contain the Network/Application Software) ► 128 Kbytes of RAM shared between the two integrated CPU’s. ► 512 bytes of RTC memory ((retains data in all states, as long as the battery or other voltage supply is present) For more information, consult the GS1011 Peripheral and Register Description [2] and GS1011 IC data sheet [3] for detailed descriptions. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 10 OF 43 GS1500M DATA SHEET 2.2.5 Clock Circuitries The GS1500M architecture uses a low-power oscillator (i.e. 32 kHz) to provide a minimal subset of functions when the chip is in its low-power deep sleep mode, and a high-speed 44 MHz oscillator to provide clock signals for the processors, bus, and interfaces during active operation. Intermediate modes of operation, in which the 44 MHz oscillator is active but some modules are inactive, are obtained by gating the clock signal to different subsystems. The Clock & Reset Controller, within the device, is responsible for generation, selection and gating of the clocks used in the module to reduce power consumption in various power states. 2.2.5.1 Real Time Clock (RTC) 2.2.5.2 Overview To provide global time (and date) to the system, the GS1500M Chip is equipped with a low-power Real Time Clock (RTC). RTC key features include: ► 32.768 kHz crystal support. ► Two external alarm inputs to wake up the device. ► Two programmable periodic outputs (one for a DC/DC regulator and one for a sensor). ► Embedded 128x32 non-volatile (battery-powered) RAM. ► Embedded Power On Reset. ► Real Time Counter (48 bits; 46 bits effective). An overview of RTC block diagram is shown in Figure 2-3. The RTC contains a low-power oscillator that can use 32.768 kHz crystals. In normal operation the RTC is always powered up, even in the Power Up state (see Figure 2-3). Two programmable embedded alarm counters (wrap-around) are provided to enable periodic wake-up of the remainder of the system, and one independent external component (typically a sensor). Two external alarm inputs enable wake-up of the system on external events. The global times are recorded on each external event and if the system is in the Power-ON state (see Figure 2-8), an interrupt is provided. The RTC includes a Power-On Reset (POR) circuit, to eliminate the need for an external component. The RTC contains low-leakage non-volatile (battery-powered) RAM, to enable storage of data that needs to be preserved. Total current consumption of the RTC in the worst case is typically less than 5 µA without data storage, using the 32.768 kHz oscillator. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 11 OF 43 GS1500M DATA SHEET Figure 2-2: RTC Interface Diagram Resolution of the wake-up timer is one clock cycle, and, with onboard 32KHz. CLK, each 32bit effective register can provide up to 1.5 days worth of standby duration as the longest standby period. Polarity of the rtc_out1 pin is programmable. 2.2.5.3 Real Time Counter The Real Time Counter features: ► 48-bit length (with absolute duration dependent on the crystal frequency used). ► Low-power design. This counter is automatically reset by power-on-reset. This counter wraps around (returns to “all-0” once it has reached the highest possible “all-1” value). 2.2.5.4 RTC Outputs There are two RTC outputs (dc_dc_cntl and rtc_out1) that can be used to control external devices, such as sensors or voltage regulators. For more information, consult the GS1011 Peripheral and Register Description [2] and GS1011 IC data sheet [3] for detailed descriptions. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 12 OF 43 GS1500M DATA SHEET 2.2.5.4.1 DC_DC_CNTL During Power-on-Reset (e.g. when the battery is connected), the dc_dc_cntl pin is held low; it goes high to indicate completion of RTC power-on-reset. This pin can be used as an enable into an external device such as voltage regulator. For more information, consult the GS1011 Peripheral and Register Description [2] and GS1011 IC data sheet [3] for detailed descriptions. 2.2.5.4.2 RTC_OUT1 The rtc_out1 signal can be disabled or driven by the Wake-up Counter 2. This counter is 34 bits long, and operates in the same fashion as Wake-up Counter 1. The rtc_out1 signal can be configured to output the low-power crystal oscillator clock (i.e. the 32 kHz clock) instead of a simple state transition. Wakeup Counter 2 is automatically reset at Power-on-Reset. For more information, consult the GS1011 Peripheral and Register Description [2] and GS1011 IC data sheet [3] for detailed descriptions. 2.2.5.5 RTC Alarm Inputs 1 and 2 The RTC inputs alarm1 and alarm2 operate as follows: ► dc_dc_cntl is set to “1” (typically enabling the power supply to the rest of the GS1011) whenever either of these inputs changes state. ► The RTC counter value is stored each time either of these inputs changes state. The inputs alarm1 and alarm2 have programmable polarity. Their task is to wake up the system (by setting dc_dc_cntl output pin to “1”) when an external event occurs. For more information, consult the GS1011 Peripheral and Register Description [2] and GS1011 IC data sheet [3] for detailed descriptions. 2.3 Peripherals Note: For register identification and additional details on the use of shared peripherals, refer to the GS1011 Peripheral and Register Description [3]. 2.3.1 SPI There are two general-purpose SPI interfaces (each configurable as master or slave) for external sensors, memory, or external CPU interface; one interface may be configured as a high-speed Slave-only. The master SPI block provides dual synchronous serial communication interfaces. The Master SPI block can be used in one of two modes of operations: as a serial master or a serial slave. Each block provides synchronous serial communication with slave or master devices, using one of the following protocols: ► Motorola Serial Peripheral Interface (SPI). ► Texas Instruments Synchronous Serial Protocol (SSP). ► National Semiconductor Microwire Protocol. Only Motorola Serial Peripheral Interface (SPI) timing is shown in this data sheet; however, National Semiconductor Microwire Protocol or Texas Instruments Synchronous Serial Protocol (SSP) modes are certainly supported. The SPI interface can also be used to access non-volatile external memory, such as an EEPROM block. The interface uses the SPI master mode to allow easy connection to industrystandard EEPROMs. The shared SPI blocks provide the following general features: ► 32-bit AMBA APB interface to allow access to data, control, and status information by the host processor. ► Full-duplex serial-master or serial-slave operation. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 13 OF 43 GS1500M DATA SHEET ► Two clock design: • APB bus clock for bus interface and registers. • Serial input clock for core logic. ► Support of external EEPROM or other non-volatile memory. ► Programmable choice of Motorola SPI, Texas Instruments Synchronous Serial Protocol or National Semiconductor Microwire. ► Programmable control of the serial bit rate of the data transfer in serial-master mode of operation. ► Programmable phase and polarity of the bit rate clock. ► Programmable transfer modes to perform transmit and receive, transmit only, receive only and EEPROM read transfers. ► Programmable data word size (8, 16, 24 & 32 bits) for each data transfer. ► Transmit and receive FIFO buffer depth 8 words (of the selected size). ► Configurable number of slave select outputs in serial-master mode of operation: 1 to 4 serial slave- select output signals can be generated. ► Combined interrupt line with independent masking of interrupts. ► Transmit FIFO overflow, transmit FIFO empty, transmit FIFO underflow, receive FIFO full, receive FIFO underflow, receive FIFO overflow, and receive FIFO timeout interrupts. ► Transmit FIFO empty and receive FIFO full interrupts provide programmable threshold values. Both SPI blocks are configured to provide a FIFO depth of four entries. The SPI master interface can be used to access external sensor devices, and EEPROM containing system parameters, under software control while the SPI slave interface can be used to provide control of the GS1500M from an external CPU. SPI chip select (MPSISI_CS0 or MPSI_CS1) signals frame each data word. If the chip select is required to remain asserted for multiple data words, then a GPIO pin should be used for the chip select instead of the SPI chip select signals. For clock architecture and rates, please refer to section 7.1 Clock Architecture of GS1011 Peripheral and Register Description [2]. For other SPI Interface Timing, please refer to section 4.7. 2.3.2 I2C The I2C block provides a two-wire I2C serial interface. It provides the following features: ► 32-bit AMBA APB interface to allow access to data, control, and status Information by the host processor. ► Serial 2-wire I C bus, compliant to the I C Bus Specification Version 2.1. ► Supports only one transfer in Standard mode (100 Kb/s) and fast speed mode with a bit rate of up to 392 Kb/s. ► Supports Multi-Master System Architecture through I C bus SCL line Synchronization and Arbitration. ► Transmitter and Receiver: The I C block can act as the Transmitter or Receiver depending on the operation being performed. ► Master or slave I C operation. ► 7- or 10-bit addressing. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 14 OF 43 GS1500M DATA SHEET ► Ignores CBUS addresses (an older ancestor of I C that used to share the I C bus). ► Interrupt or polled mode operation. ► Combined interrupt line triggered by: • • • • • • • • Tx FIFO not FULL. Rx FIFO not EMPTY. Rx FIFO FULL (can be used to transfer data by host interface in bursts). Tx FIFO EMPTY (can be used to transfer data by host interface in bursts). Rx FIFO OVER RUN. Master mode to Slave Transfer Request. Slave Transmit Request. Break Interrupt (master mode): No Acknowledge received from slave for slave address or write data. ► Digital debounce logic for the received SDA and SCL lines. ► Hold Delay Insertion on SDA line. 2.3.3 UART The GS1500M includes two UART blocks. Each UART block provides an asynchronous communication interface, using only two data lines: Rx data and Tx data. Hardware flow control using RTS/CTS signaling is provided as an option. The UART is a standard asynchronous serial interface, 16450/16550 compatible. It provides the following features: ► Operation in full-duplex mode. ► All standard bit rates up to 921.6 kbps are supported. ► RTS/CTS flow control handshake (standard 16550 approach). ► 5, 6, 7 and 8-bit character format. ► 1 or 2 stop bits (1.5 in case of a 5-bit character format). ► Parity bit: none, even, odd, mark, or space. ► 16-byte Rx and 16-byte Tx FIFOs. The UART Serial port can be used to communicate with a PC or other devices, for debug or additional functionality. 2.3.4 JTAG The JTAG ports facilitate debugging of the board and system designs. This block has the following features: ► Compliant to IEEE-1149.1 TAP ports. ► One JTAG boundary scan TAP port. ► One set of JTAG pins, which support the following mode of operation: • APP ARM7TDMI-S Debug Mode. A detailed example of JTAG debug access is described in GainSpan Application Note AN-011 [4]. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 15 OF 43 GS1500M DATA SHEET 2.3.5 GPIO & LED Driver / GPIO The GPIO ports are referenced to VDDIO. Two GPIO pins called GPIO30_LED1 & GPO31_LED2 have the capability to sink/source 20 mA typical (VDDIO=3.3V) to connect to devices such as switch contacts or LEDs. I2C_DATA/GPIO8 & I2C_CLK/GPIO9 have the capability to sink/source 12 mA typical (VDDIO=3.3V). Other GPIO’s have the capability to sink/source 4 mA typical (VDDIO=3.3V). All inputs are capable of generating processor interrupts. They can be individually programmed to provide edge- or level-triggered interrupts. For details on configuring GPIO ports, refer to the GS1011 Peripheral and Register Description [2]. 2.3.6 ADC The ADC is a 10-bit, low-power, A-to-D converter capable of running at up to 32 ksps. The ADC contains an internal band-gap reference which provides a stable 1.2 V reference voltage. The ADC can be programmed to use the 1.8 V supply as the full-scale reference. The ADC uses an input clock with a maximum frequency of 1 MHz. A conversion requires 32 clock cycles. When the internal band-gap reference is used, the reported integer Value at temperature T (ºC) is related to the voltage Vactual at the input pin as: 1.2444 − 0.00014 (25 − T ) Vactual = Value 1023 When the 1.8V supply voltage is used as the reference, the corresponding relation is: − 0.036 V Vactual = Value DD, ADC 1023 To reduce power consumption the ADC can be disabled automatically between periodic measurements and after single measurements. For more information, consult the GS1011 Peripheral and Register Description [2] and GS1011 IC data sheet [3] for detailed descriptions. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 16 OF 43 GS1500M DATA SHEET 2.4 System States Figure 2-8 shows the power management/clock states of the GS1500M system. Figure 2-3: GS1500M System States The system states of the GS1500M system are as follows: Power OFF: No power source connected to the system. Power Up: When supply voltage is stable and the RTC is powered up, and the system transitions from the Power OFF state to the Power Up state. In this state only the 32.768 kHz clock is running, and the RTC is powered directly by the battery or DC supply. This is the lowest-power-consumption state. Note: During first battery plug, i.e. when power is applied first time to the RTC power rail (VBAT), the RTC startup up latency will be at least couple of hundred ms as it is waiting for stabilization of the 32KHz crystal PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 17 OF 43 GS1500M DATA SHEET System Configuration: When a power-up is requested, the system transitions from the Power Up state to the System Configuration state. In this state, the WLAN CPU is released from reset by the RTC. The APP CPU remains in the reset state during System Configuration. The WLAN CPU then executes the required system configurations, releases the APP CPU from reset, and transitions to the Power-ON state. The System Configuration state is also entered on transition from the Power-ON state to the Power Up state, to complete necessary preparations before shutting off the power to the core system. Finally, the System Configuration state is used for firmware updates. Power-ON: This is the active state where all system components can be running. The Power-ON state has various sub-states, in which unused parts of the system can be in sleep mode, reducing power consumption. Sleep states are implemented by gating the clock signal off for a specific system component. The Deep-Sleep sub-state, in which all clocks are gated off, allows minimum power consumption while permitting rapid resumption of normal operation. In this state, the 44 MHz reference oscillator can be turned off to further reduce power consumption. For more information, consult the GS1011 Peripheral and Register Description [2] and GS1011 IC data sheet [3] for detailed descriptions. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 18 OF 43 GS1500M DATA SHEET 3 Pin-out and Signal Description 3.1 GS1500M Device Pin-out Diagram (Module top view) Figure 3-1: GS1500M Device Pin-out Diagram (Module top view) PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 19 OF 43 GS1500M DATA SHEET 3.1.1 GS1500M Module Pins Description Pins Name Voltage Domain Internal Bias after hardware reset Signal State Description GND 0V Not Applicable Analog port Ground JTAG_TCK VDDIO Pull-up (See Note 1) Digital Input Joint Test Action Group Test Clock JTAG_TDO VDDIO Not Applicable Digital Output Joint Test Action Group Test Data Out JTAG_TDI VDDIO Pull-up (See Note 1) Digital Input Joint Test Action Group Test Data In JTAG_TMS VDDIO Pull-up (See Note 1) Digital Input Joint Test Action Group Test Mode Select JTAG_nTRST VDDIO Pull-up (See Note 1) Digital Input Joint Test Action Group Test Mode Reset Active Low ALARM1 VBAT Pull-down (See Note 1) Digital Input Embedded Real Time Clock Wake Up Input 1 RTC_OUT1 VBAT Not Applicable Digital Output Embedded Real Time Clock Wake Up Output 1 VBAT VBAT Not Applicable Analog port Embedded Real Time Clock Power Supply 10 DC_DC_CNTL VBAT Not Applicable Digital Output VIN_3V3 Regulator Control Output 11 ADC1 VDD18 Not Applicable Analog Output General Analog to Digital Converter 1 Not Applicable Analog Output General Analog to Digital Converter 2 (internal) 12 ADC2 VDD18 (internal) 13 ALARM2 VBAT Pull-down (See Note 1) Digital Input Embedded Real Time Clock Wake Up Input 2 14 MSPI_DIN / GPIO6 VDDIO Pull-down Digital Input Master Serial Peripheral Interface Bus Data Input / General Purpose Input Output 15 MSPI_DOUT / GPIO7 VDDIO Pull-down Digital Output Master Serial Peripheral Interface Bus Data Output / General Purpose Input Output 16 VOUT_1V8 VIN_3V3 Not Applicable Analog port Internal 1.8V Vout (internally regulated) 17 GND 0V Not Applicable Analog port Ground 18 MSPI_CLK / GPIO5 VDDIO Pull-down Digital Input / Output Master Serial Peripheral Interface Bus Clock / General Purpose Input Output 19 MSPI_CS0 / GPIO4 VDDIO Pull-down Digital Input / Output Master Serial Peripheral Interface Bus Chip Select 0 / General Purpose Input Output 20 MSPI_CS1 / GPIO13 VDDIO Pull-down Digital Output Master Serial Peripheral Interface Bus Chip Select 1 / General Purpose Input Output 21 GPO21_11MHZ VDDIO Pull-down Digital Input Internal Clock Circuitry Test Point / General Purpose Input Output 22 GPO20_22MHZ VDDIO Pull-down Digital Input Internal Clock Circuitry Test Point / General Purpose Input Output PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 20 OF 43 GS1500M DATA SHEET Pins Name Voltage Domain Internal Bias after hardware reset Signal State Description 23 GPO19_44MHZ VDDIO Pull-down Digital Input Internal Clock Circuitry Test Point / General Purpose Input Output 24 PWM0 / GPIO10 VDDIO Pull-down Digital Output Pulse Width Modulator / General Purpose Input Output 25 I2C_CLK/GPIO9 VDDIO Pull-down (NOTE 4) Digital Input / Output Inter-Integrated Circuit Clock / General Purpose Input Output 26 I2C_DATA/GPIO8 VDDIO Pull-down (NOTE 4) Digital Input / Output Inter-Integrated Circuit Data / General Purpose Input Output 27 SSPI_DOUT VDDIO Pull-up (See Note 1) Digital Input 28 SSPI_CLK VDDIO Pull-up (See Note 1) Digital Input 29 SSPI_CS VDDIO Pull-up (See Note 1) Digital Input 30 SSPI_DIN VDDIO Pull-down (See Note 1) Digital Input SPI Slave Transmit Data Output to the HOST SPI Slave Clock Input from the HOST SPI Slave Chip Select Input from the HOST SPI Slave Receive Data Input from the HOST 31 VIN_3V3 VIN_3V3 Not Applicable Analog port Single Supply Port 32 GND 0V Not Applicable Analog port Ground 33 EN_1V8 VDDIO Need to be driven HIGH or LOW externally Digital Input Internal 1.8V regulator enable port-Active High 34 VDDIO VDDIO Not Applicable Analog port All I/O voltage domain (can be tied to VIN_3V3 or tied to HOST I/O supply) 35 UART1_CTS / GPIO26 VDDIO Pull-down Digital Input Universal Asynchronous Receiver Transmitter 1 Clear to Send Input / General Purpose Input Output 36 UART1_RTS / GPIO27 VDDIO Pull-down Digital Output Universal Asynchronous Receiver Transmitter 1 Request to Send Output / General Purpose Input Output (See Note 2) 37 UART1_RX / GPIO3 VDDIO Pull-down Digital Input Universal Asynchronous Receiver Transmitter 1 Receive Input / General Purpose Input Output 38 UART1_TX / GPIO2 VDDIO Pull-down Digital Output Universal Asynchronous Receiver Transmitter 1 Transmitter Output / General Purpose Input Output 39 UART0_TX / GPIO1 VDDIO Pull-down Digital Output Universal Asynchronous Receiver Transmitter 0 Transmitter Output / General Purpose Input Output 40 UART0_RTS / GPIO25 VDDIO Pull-down Digital Output Universal Asynchronous Receiver Transmitter 0 Request to Send Output / General Purpose Input Output 41 UART0_RX / GPIO0 VDDIO Pull-down Digital Input Universal Asynchronous Receiver Transmitter 0 Receive Input / General Purpose Input Output PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 21 OF 43 GS1500M DATA SHEET Pins Name Voltage Domain Internal Bias after hardware reset Signal State Description 42 UART0_CTS / GPIO24 VDDIO Pull-down Digital Input Universal Asynchronous Receiver Transmitter 0 Clear to Send Input / General Purpose Input Output 43 GPO31_LED2 VDDIO Pull-down Digital Output Light Emitting Diode Driver / General Purpose Input Output 44 GPIO30_LED1 VDDIO Pull-down Digital Output Light Emitting Diode Driver / General Purpose Input Output 45 GPIO29 VDDIO Pull-down Digital Input / Output General Purpose Input Output Digital Input / Output General Purpose Input Output (See Note 3) 46 GPIO28 VDDIO Pull-down (See Note 3) 47 EXT_RESET VDDIO Pull-up Digital Input / Output Module Hardware Reset Input and Power Supply Reset Monitor Indictor 48 GND 0V Not Applicable Analog port Ground Table 3-1: Signal Description Notes: 1. These pins have onboard hardware configured pull-ups/downs and cannot be changed by software. 2. If UART1_RTS is high during boot, then the WLAN will wait for Flash download via UART0. For development purposes, route this pin to a test point on the board so it can be pulled up to VIN_3V3. 3. GPIO 28 and 29 are sampled at reset to establish JTAG configuration for debugging. These signals should not be driven from an external device. If using JTAG, configure these pins as outputs. 4. If I C interface is used, provide 2K Ohm pull-ups, to VDDIO, for pins 25 and 26 (I2C_CLK and I2C_DATA) PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 22 OF 43 GS1500M DATA SHEET Figure 3-2: Module pin connection diagram Note 1) For the noted pin configurations, please refer to data sheet power supply section. Note 2) If I2C interface is used, provide 2KOhm pull-ups, to VDDIO, for pins 25 and 26 (I2C_CLK and I2C_DATA). If not used, leave pins 25 and 26 as No Connects. Note 3) Connect to external HOST SPI (can be left as No Connects if not used). Note 4) Connect to external serial HOST UART (can be left as No Connections if not used) Note 5) This switch enables the programming of GS1011 onboard flash. Switch is recommended for development purposes and is not needed for production. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 23 OF 43 GS1500M DATA SHEET 4 Electrical Characteristics 4.1 Absolute Maximum Ratings Conditions beyond those cited in Table 4-1 may cause permanent damage to the GS1500M, and must be avoided. Parameter Storage temperature RTC Power Supply I/O Supply voltage Single Supply Port Symbol TST Vbat VDDIO VIN_3V3 Minimum -55 -0.5 -0.5 2.7 Typical 3.3 Maximum +125 4.0 4.0 4.0 Unit ºC Table 4-1: Absolute Maximum Ratings NOTE: For limitations on state voltage ranges, please consult section 2.6.1 Power supply. 4.2 Operating Conditions Parameter Extended temp. range RTC Power Supply I/O Supply voltage Single Supply Port GS1500M Symbol TA Vbat VDDIO Minimum -40 2.5 1.7 Typical 3.3 3.3 Maximum +85 3.6 3.6 Unit ºC VIN_3V3 2.7 3.3 3.6 Table 4-2: Operating Conditions 4.3 Internal 1.8V regulator VIN_3V3=VDDIO=Vbat=3.3V Temp=25ºC fOSC=3.0MHz Parameter Output Voltage Maximum Output Current Oscillation Frequency 1.8V Regulator Enable "H" Voltage 1.8V Regulator Enable "L" Voltage Symbol Test conditions Minimum Typical 1.8 30 Maximum Unit VOUT_1V8 IVOUT_1V8 fOSC 1.6 50 3.45 mA MHz EN_1V8 1.0 VIN_3V3 EN_1V8 0.25 Table 4-3: Internal 1.8V Regulator PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 24 OF 43 GS1500M DATA SHEET 4.4 I/O DC Specifications 4.4.1 Digital Input Specifications Parameter Input Low Voltage Symbol VIL Input High Voltage VIH Minimum -0.3 0.8* VDDIO Typical Maximum 0.25* VDDIO Unit VDDIO Note Table 4-4: Digital Input Parameters 4.4.2 Digital Output Specification Parameter Output Low Voltage Symbol Mininum VOL Output High Voltage Output rise time @ VDDIO=3.3V Output fall time @ VDDIO=3.3V Typical 1.3 V Maximum Unit Note 0.4 With 4 mA load VDDIO tTLH ns tTHL ns VOH VDDIO=3.0V, DC current load 4.0 mA VDDIO =1.62 V, DC current load 2.0 mA With 4 mA, 33 pF load With 4 mA, 33 pF load Table 4-5: Digital Output Parameters 4.4.3 I/O Digital Specifications (Tri-State) Parameter Input Low Voltage Input High Voltage Schmitt trig. Low to High threshold point Schmitt trig. High to Low threshold point Input Leakage Current Tri-State Output Leakage Current Pull-Up Resistor Pull-Down Resistor PRELIMINARY Symbol VIL VIH Mininum -0.3 0.8* VDDIO VT+ 1.5 Typical Maximum 0.25* VDDIO Unit VDDIO VT- IL µA OzL µA Ru 0.05 MΩ Rd 0.05 MΩ GAINSPAN CONFIDENTIAL Note Pull up/down disabled Pull up/down disabled PAGE 25 OF 43 GS1500M DATA SHEET Parameter Output Low Voltage Symbol Mininum VOL Output High Voltage VOH Output rise time @ VDDIO =3.3V Output fall time @ VDDIO = 3.3V Input rise time Input fall time Typical Maximum Unit 0.4 1.3 V VDDIO tToLH ns tToHL ns tTiLH tTiHL ns ns Note With 4/12/20 mA load With 4/12/20 mA load With 2/6/10 mA load With 4/12/20 mA load, 33 pF With 4/12/20 mA load, 33 pF Table 4-6: I/O Digital Parameters 4.4.4 RTC Input Specifications (with Schmitt Trigger) Parameter I/O Supply Voltage Input Low Voltage Input High Voltage Schmitt trig. Low to High threshold point Schmitt trig. High to Low threshold point Input Leakage Current Symbol VDDRTC VIL VIH Mininum 1.2 -0.3 0.8*VDDRTC VT+ VT- Maximum Vbat 0.25*VDDRTC VDDRTC Unit 0.57*VDDRTC 0.68*VDDRTC 0.27*VDDRTC 0.35*VDDRTC IL Typical 260 Note pA Table 4-7: RTC Input Parameters 4.4.5 RTC Output Specifications Parameter I/O Supply Voltage Output Low Voltage Output High Voltage Output rise time Output fall time Input Leakage Current Symbol VDDRTC VOL VOH tTLH tTHL IL Mininum 1.2 0.8*VDDRTC 19 21 Typical Maximum Vbat 0.4 VDDRTC 142 195 730 Unit ns ns pA Note 50 pF load 50 pF load Table 4-8: RTC Output Parameters PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 26 OF 43 GS1500M DATA SHEET 4.5 Power Consumption (estimated) Test Conditions: VDD33=VDDIO=Vbat=3.3V Temp=25ºC System state Deep Sleep Receive (GS1500M; -xx dBm RX sens. @ xxMbps. Transmit (GS1500M; xx dBm at antenna port @ 11n HT20 MCS7) Current (Typ.) 3mA TBD TBD Table 4-9: Power Consumption in Different States 4.6 Radio Parameters Test Conditions: VIN_3V3=VDDIO=Vbat=3.3V Temp=25ºC Parameter RF Frequency range Radio bit rate Minimum 2412 Typical Maximum 2497 HT20 MCS7 Unit MHz Notes Mbps Transmit/Recieve specification for GS1500M Output power (average) 11 dBm Modulated signal at antenna port; 54 Mbps. dBr Modulated signal at antenna port dBm HT20, MCS7 OFDM, 8% PER 54 Mbps OFDM, 8% PER 1 Mbps BPSK, 8% PER Spectrum Mask F0 +/- 11 MHz Offset >= 22 MHz Receive Sensitivity at antenna port -TBD -TBD -TBD -73 -94 Table 4-10: Radio Parameters PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 27 OF 43 GS1500M DATA SHEET 4.7 ADC Parameters Test Conditions: VIN_3V3=VDDIO=Vbat=3.3V Temp=25ºC Parameter ADC Resolution ADC Sample Freq ADC input Clock Freq Minimum 1.024 Typical 10 Maximum 31.25 Unit Bits ksps 32.768 1000 kHz ADC Full Scale Voltage Conversion Time VOUT_1V8 – 0.036 32 Clocks ADC Integral Non-Linearity (INL) -2.0 2.0 LSB ADC Differential non-linearity (DNL) -1.0 1.0 LSB 400 800 µA ADC Offset Error -10 10 mV ADC Gain Error -10 10 mV µS AVDD Power Supply current (operational) Settling Time Input resistance MOhm Input Capacitance 10 pF 1.179 1.24 1.301 Bandgap Output Voltage (Vref) (T = 25 ºC) Notes Reference = VOUT_1V8 Based on internally generated 1MHz or 32.768 KHz Clocks Table 4-11: ADC Parameters PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 28 OF 43 GS1500M DATA SHEET 4.8 SPI Interface Timing Test Conditions: VIN_3V3=VDDIO=Vbat=3.3V Temp=25ºC 4.8.1 Motorola SPI, clock polarity SPO = 0, clock phase SPH = 0 Figure 4-1: timing diagram, Master mode, SPO=SPH=0. Parameter tSSetup tTxdDelay tRxdSetup tRxdHold tSSHold Description Minimum Minimum time between falling edge of Select line and first rising edge of SPI clock Unit MSPI clock period 2 core SPI clock periods + 3 nsec Delay in Master asserting TX line after falling edge of Select line Time before rising edge of SPI clock by which received data must be ready Time for which received data must be stable after rising edge of SPI clock Time for which the Select line will be held after the sampling edge for the final bit to be transferred Maximum mixed 30 nsec 10 nsec MSPI clock period Table 4-12: timing parameters, Master mode, SPO=SPH=0. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 29 OF 43 GS1500M DATA SHEET Figure 4-2: timing diagram, Slave mode, SPO=SPH=0. Parameter tSSetup tTxdDelay tRxdSetup Description Minimum Minimum time between falling edge of Select line and first rising edge of SPI clock. 4 core SPI clock periods + 68 ns Delay in Slave asserting TX line after falling edge of SPI clock, or the first bit after falling edge of the Select line. Time before rising edge of SPI clock by which received data must be ready tRxdHold Time for which received data must be stable after rising edge of SPI clock tSSHold Time for which the Select line will be held after the sampling edge for the final bit to be transferred Maximum Unit mixed 4 core SPI clock periods + 68 ns 15 3 core SPI clock periods + 14 ns 3 core SPI clock periods + 14 ns mixed ns mixed mixed Table 4-13: timing parameters, Slave mode, SPO=SPH=0. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 30 OF 43 GS1500M DATA SHEET 4.8.2 Motorola SPI, clock polarity SPO = 0, clock phase SPH = 1 Figure 4-3: timing diagram, Master, SPO=0, SPH=1. Parameter tSSetup tTxdDelay tRxdSetup tRxdHold tSSHold Description Minimum Minimum time between falling edge of select line and first rising edge of SPI clock. Delay in Master asserting TX line after rising edge of SPI clock. Time before falling edge of SPI clock by which received data must be ready. Time for which received data must be stable after falling edge of SPI clock. Time for which the Select line will be held low after the sampling edge for the final bit to be transferred. Maximum Unit MSPI clock period 1.5 ns 30 ns 10 ns 0.5 MSPI clock period Table 4-14: timing parameters, Master mode; SPO=0, SPH=1. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 31 OF 43 GS1500M DATA SHEET Figure 4-4: timing diagram, Slave, SPO=0, SPH=1. Parameter Description tSSetup Minimum time between falling edge of select line and first rising edge of SPI clock. tTxdDelay Delay in Slave asserting TX line after rising edge of SPI clock. tRxdSetup Time before falling edge of SPI clock by which received data must be ready. tRxdHold Time for which received data must be stable after falling edge of SPI clock. tSSHold Time for which the Select line will be held low after the sampling edge for the final bit to be transferred. Minimum Maximum Unit 15 ns 4 core SPI clock periods + 68 ns 15 3 core SPI clock periods + 14 ns 3 core SPI clock periods + 14 ns mixed ns mixed mixed Table 4-15: timing parameters, Slave mode, SPO=0, SPH=1. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 32 OF 43 GS1500M DATA SHEET 4.8.3 Motorola SPI, clock polarity SPO = 1, clock phase SPH = 0 Figure 4-5: timing diagram, Master mode, SPO=1, SPH=0. Parameter Description Minimum tSSetup Minimum time between falling edge of select line and first falling edge of SPI clock. tTxdDelay Delay in Master asserting TX line after falling edge of Select line. tRxdSetup tRxdHold tSSHold Time before falling edge of SPI clock by which received data must be ready. Time for which received data must be stable after falling edge of SPI clock. Time for which the Select line will be held low after the sampling edge for the final bit to be transferred. Maximum Unit MSPI clock period 2 core SPI clock periods + 3 ns mixed 30 ns 10 ns MSPI clock period Table 4-16: timing parameters, Master mode, SPO=1, SPH=0. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 33 OF 43 GS1500M DATA SHEET Figure 4-6: timing diagram, Slave mode, SPO=1, SPH=0. Parameter tSSetup tTxdDelay tRxdSetup Description Minimum Minimum time between falling edge of Select line and first falling edge of SPI clock. 4 core SPI clock periods + 68 ns Delay in Slave asserting TX line after rising edge of SPI clock, or the first bit after falling edge of the Select line. Time before falling edge of SPI clock by which received data must be ready. tRxdHold Time for which received data must be stable after falling edge of SPI clock. tSSHold Time for which the Select line will be held low after the sampling edge for the final bit to be transferred. Maximum Unit Mixed 4 core SPI clock periods + 68 ns 15 3 core SPI clock periods + 14 ns 3 core SPI clock periods + 14 ns Mixed ns Mixed MSPI clock period Table 4-17: timing parameters, Slave mode, SPO=1, SPH=0. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 34 OF 43 GS1500M DATA SHEET 4.8.4 Motorola SPI, clock polarity SPO = 1, clock phase SPH = 1 Figure 4-7: timing diagram, Master mode, SPO=SPH=1. Parameter tSSetup tTxdDelay tRxdSetup tRxdHold tSSHold Description Minimum time between falling edge of select line and first falling edge of SPI clock. Delay in Master asserting TX line after falling edge of SPI clock. Time before rising edge of SPI clock by which received data must be ready. Time for which received data must be stable after rising edge of SPI clock. Time for which the Select line will be held low after the sampling edge for the final bit to be transferred. Minimum Maximum Unit MSPI clock period 1.5 ns 30 ns 10 ns 0.5 MSPI clock period Table 4-18: timing parameters, Master mode, SPO=SPH=1. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 35 OF 43 GS1500M DATA SHEET Figure 4-8: timing diagram, Slave mode, SPO=SPH=1. Parameter Description Minimum tSSetup Minimum time between falling edge of select line and first falling edge of SPI clock. 15 tTxdDelay Delay in Slave asserting TX line after falling edge of SPI clock. tRxdSetup Time before rising edge of SPI clock by which received data must be ready. tRxdHold Time for which received data must be stable after rising edge of SPI clock. tSSHold Time for which the Select line will be held low after the sampling edge for the final bit to be transferred. Maximum Unit ns 4 core SPI clock periods + 68 ns 15 3 core SPI clock periods + 14 ns 3 core SPI clock periods + 14 ns Mixed ns Mixed Mixed Table 4-19: timing parameters, Master mode, SPO=SPH=1. 4.9 Electrostatic discharge (ESD) TBD PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 36 OF 43 GS1500M DATA SHEET 5 Package and Layout Guidelines 5.1 GS1500M Recommended PCB Footprint and Dimensions Figure 5-1: GS1500M Module Recommended PCB Footprint (dimensions are in inches) PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 37 OF 43 GS1500M DATA SHEET Figure 5-2: GS1500M Module Dimensions (in inches) PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 38 OF 43 GS1500M DATA SHEET 6 Ordering Information DEVICE DESCRIPTION ORDERING NUMBER Rev Low power module using PCB antenna GS1500M Rev X.X PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 39 OF 43 GS1500M DATA SHEET 7 Regulatory Notes Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC & IC Radiation Exposure Statement: This equipment complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC & IC authorizations are no longer considered valid and the FCC & IC IDs cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining separate FCC & IC authorizations. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example access points, routers, wireless ADSL modems, and similar equipment). The final end product must be labeled in a visible area with the corresponding FCC ID number. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 40 OF 43 GS1500M DATA SHEET IC Certification — Canada The labeling requirements for Industry Canada are similar to those of the FCC. A visible label on the outside of the final product must display the IC labeling. The user is responsible for the end product to comply with IC ICES-003 (Unintentional radiators) Manual Information That Must be Included The user’s manual for end users must include the following in-formation in a prominent location. IMPORTANT NOTE: To comply with FCC & IC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Other notes: GainSpan modules have been built or under development for near body exposure applications. The 20cm statement is a standard note because absorption rate testing (commonly known as SAR or Specific absorption rate) is not modularly transferable for FCC/IC. Thus, if a radio is being used against the body, the end user is still responsible to test for regulatory near body exposure testing (for USA, please refer to the following): • FCC Part 1.1037 • FCC Part 2.1091 Mobile Devices • FCC Part 2.1093 Portable Devices • FCC Part 15.247 (b) (4) PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 41 OF 43 GS1500M DATA SHEET 8 Limitations THIS DEVICE AND ASSOCIATED SOFTWARE ARE NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE OR RESALE FOR THE OPERATION OF APPLICATION IN A HAZARDOUS ENVIRONMENT, OR REQUIRING FAIL-SAFE PERFORMANCE, OR IN WHICH THE FAILURE OF PRODUCTS COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE (COLLECTIVELY, "HIGH RISK APPLICATIONS"). YOU AGREE AND ACKNOWLEDGE THAT YOU HAVE NO LICENSE TO, AND SHALL NOT (AND SHALL NOT ALLOW A THIRD PARTY TO) USE THE TECHNOLOGY IN ANY HIGH RISK APPLICATIONS, AND LICENSOR SPECIFICALLY DISCLAIMS ANY WARRANTY REGARDING, AND ANY LIABILITY ARISING OUT OF, HIGH RISK APPLICATIONS. PRELIMINARY GAINSPAN CONFIDENTIAL PAGE 42 OF 43 GS1500M DATA SHEET 9 References [1] Title Reference Version Source Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications IEEE Standard 802.11-2007 June 12, 2007 Date IEEE [2] Title Reference Version Source GS1011 Peripheral and Register Description GS1011-PRD 1.0 Date GainSpan [3] Title Reference Version Source GS1011 ULTRA LOW-POWER WIRELESS SYSTEM-ON-CHIP DATA SHEET GS1011-DS 1.0 November 9, 2009 Date GainSpan PRELIMINARY GAINSPAN CONFIDENTIAL November 11, 2009 PAGE 43 OF 43
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Ravi Subramanian / Daniel M. Dobkin Company : GainSpan Modify Date : 2011:11:04 10:10:39-07:00 Rev Date : 1 October 2009 Subject : MT Mac Eqns : 1 Doc Version : SP-1.0 Content Type : Document Create Date : 2011:10:11 11:41:03-07:00 Doc Reference : GS1011-DS PXC Viewer Info : PDF-XChange Viewer;2.5.199.0;Sep 27 2011;19:41:29;D:20111104101039-07'00' Source Modified : D:20111011183913 Page Count : 43 Tagged PDF : Yes XMP Toolkit : XMP Core 4.1.1 Metadata Date : 2011:10:11 11:41:23-07:00 Creator Tool : Acrobat PDFMaker 9.1 for Word Document ID : uuid:7d4aa30d-e636-4d32-922a-aeff1161edac Instance ID : uuid:72e226e8-4195-4d66-954e-0b32cd725e1f Format : application/pdf Title : GS1011 Data sheet Description : Creator : Ravi Subramanian / Daniel M. Dobkin Producer : Adobe PDF Library 9.0 Keywords : Page Layout : OneColumnEXIF Metadata provided by EXIF.tools