Contents
- 1. Users Manual part 1of4
- 2. Users Manual part 2of4
- 3. Users Manual part 3of4
- 4. Users Manual part 4of4
Users Manual part 3of4
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3153697 |
| Application ID | Yr5vP3/nCbuKaD4vALFyfA== |
| Document Description | Users Manual part 3of4 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 14.89kB (186075 bits) |
| Date Submitted | 2016-09-30 00:00:00 |
| Date Available | 2016-10-04 00:00:00 |
| Creation Date | 2016-09-20 11:12:04 |
| Producing Software | Acrobat Distiller 10.1.14 (Windows) |
| Document Lastmod | 2016-09-20 11:12:04 |
| Document Title | Untitled |
| Document Creator | AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST) |
| Document Author: | hungerin |
not mounted to keep the metal contacts dry and protected. Tools Needed • • • • Drill Phillips Phil sc screwdriver 9.5 mm m (3/8 in.) wrench or socket 3 bbolts or 3 screws: ◦ #8 (4 mm) pan-head machine bolts with nuts and washers, and a 5 mm (1/16 in.) drill bit ◦ #8 (4 mm) pan-head self-tapping screws and a 1.5 mm (1/16 in.) drill bit AF WARNING See the Important Safety and Product Information guide in the GPS device product box for product warnings and other important information. Garmin strongly recommends having ng an experienced installer with the proper oper knowledge of electrical systems ms install the device. Incorrectly wiring the he power cable can result in damage to the vehicle or the battery and can cause se bodily dily injury. Marine Mount Instructions To obtain the best performance and to avoid damage to your boat, install the device according to these instructions. Read all installation instructions before all proceeding ng with wi the th installation. If you experience during the installation, ience difficulty diff contact Support. ntact Garmin min Product Pr ® CAUTION Always wear safety goggles, ear whe drilling, wh protection, and a dust mask when cutting, or sanding. NOTICE CE The metal contacts on the GPS device and the mount should be kept dry to avoid equipment damage. Use the weather cap on the mount at all times when the unit is Mounting Considerations NOTICE The swivel base must be mounted using pan-head machine bolts or self-tapping screws. Using screws with countersunk heads can damage the mounting bracket. If you intend to secure the base with self-tapping screws, drill three 1.5 mm (1/16 in.) starter holes. NOTE: Do not make the holes deeper than half of the screw length. swiv base with the bolts 4 Secure the swivel or screws ws ➂. AF Mounting the Bracket Assembly • The device should be mounted in a location that provides a clear view of the screen and is easy to reach. The device should be mounted in a location that is sturdy enough to support the mount and device. The device must be mounted in a location that allows room to route and connect the cables. You should allow at least 8 cm (3 in.) of clearance behind the case. 1 Separate the swivel base ➀ from thee mount. se as a template, temp tem 2 Using the swivel base mark the pilot hole locations ations ➁. 3 Select an option: • If you intend to secure the base with machine bolts, drill three 5 mm (5/32 in.) holes. 5 Place the swivel mount bracket ➃ over the swivel base and secure it with the short knob ➄. Installing the Mount on the Mounting Bracket 1 Align the slot ➀ on the back of the cradle with the long mounting knob ➁, Important Safety Information T and slide the cradle into place on the bar. NOTE: You can turn the long mounting knob to adjust the width of the bracket arms. Rotate the swivel swiv mount bracket ➃ to 3 Rotat AF an optimal vviewing angle, and tighten knobs. the kknob The bbracket clicks as you turn it. an 2 Adjust the angle of thee cradle, and tighten the long mounting ounting nting knob until the cradle ➂ is secure. secur Important Safety Information Con Connecting Power to the Mount 1 Select a mounting location based on available power sources, safe cable routing, and an unobstructed view. 2 Connect the cables. 1 Place the weather cap ➀ in the Item Wire Color Wire Function ➀ ➁ ➂ ➃ ➄ ➅ Red Power Black Power Serial data input Blue Serial data output Green Serial ground wire AF Yellow storage area on the mount. ace the bottom of your device into 2 Place the cradle ➁. Audio jack nnec nnected 3 Insulate and secure unconnected wires. Installing the Device in the Mount NOTICE CE Before you place the device ce in the th mount, ensure that the metal contacts on the device and the mount are dry. Moisture on the contacts causes equipment damage. Use the weather cap to keep the mount cradle dry. 3 Tilt the device back until it snaps into place. Important Safety Information T 4 Using the security screw tool, tighten the security screw ➂ on the top of the mount ➃. AF th device oout of the mount. 3 Lift the Place the w weather cap ➁ on the 4 Pla Removing the Device from om the Mount cradle. cradle rew. 1 Loosen the security screw. Press the button on ➀ the side of the mount to releasee the device. Important Safety Information D AF D AF Garmin and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin. AF ® © 2011–2016 Garmin Ltd. or its subsidiaries Printed in Taiwan www.garmin.com/support July 2016 190-02006-92_0A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : hungerin Create Date : 2016:09:20 11:12:04+08:00 Modify Date : 2016:09:20 11:12:04+08:00 Subject : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 GTS PDFX Version : PF_PDFX_3_2003 Document ID : uuid:5228b2b4-5edd-674e-5492-e6eacf779bb1 Version ID : 1 Rendition Class : default Instance ID : uuid:ac50bb2a-e33e-466d-a009-4da6a60dc583 Producer : Acrobat Distiller 10.1.14 (Windows) Creator Tool : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST) Metadata Date : 2016:07:27 14:21:43-05:00 Format : application/pdf Description : Title : Untitled Creator : hungerin Page Count : 8EXIF Metadata provided by EXIF.tools