Garmin GARVHF3 Fixed Mount Class D DSC VHF Marine Radio User Manual VHF300 Instruction

Download:
Mirror Download [FCC.gov]
Document ID	1158394
Application ID	vvoU7ontPTZ5aLyvhG+CiA==
Document Description	User Manual 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.76kB (159439 bits)
Date Submitted	2009-08-25 00:00:00
Date Available	2009-08-25 00:00:00
Creation Date	2009-05-09 15:25:36
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-05-09 15:25:36
Document Title	Microsoft Word - VHF300_Instruction.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Standard Configuration
HS3
port
HS2
Port
HS1
port
Power
Accessory
port
NMEA2k
port
10meter
Extension
Cable
Optional Configuration
Please use same cable that was
provided for VHF200.
10meter
Extension
Cable
DC12V
10meter
Extension
Cable
Items listed below were sent for testing.
VHF300 BASE
Q’ty : 3
Handset with Audio input/output terminals
Q’ty : 3
Speaker with Audio output terminals / White resin material
Q’ty : 3
--Note-Please do not use the Handset which this arrangement was given for EMC TEST.
--Note-Please do not use the Handset which this arrangement was given for EMC TEST.
*4ohm dummy load is installed.
*22 ohm dummy load is installed instead of speaker.
*Speaker is not active.
*Microphone is not active.
*Speaker will active when un-pluged.
JIGfor AFIN/OUT
Normal Speaker / White resin material
Q’ty : 3
Normal Handset
Q’ty : 3
--Note-Please use normal Handset for EMC TEST.
--Note-Please use the normal Speaker for EMC TEST.
PTT
1.
2.
Press to turn on power.
Press and hold to turn off power.
TX power setting mode.
*Press the Left soft key to select TX power.
1.
2.
1st press to enter Squelch setting.
2nd press to enter Volume setting.
“3.5mm Jack” for Audio input and output.
--Note-Please do not use the Handset which this arrangement was
given for EMC TEST.
Enter the Test Mode testing the Modulation of DSC .
Step-1.
Enter the Test Mode
1. Turn off power.
2. Press and hold “MENU” + “16”.
Step-2
Enter the Key code
Please enter the Key code as follow.
CLEAR>>Center softkey>>Left softkey>>Right sofykey
Screen will be as right image.
155.050
01
LO POWER
LEVEL:050
PRESS OK
1 Testing of FSK modulation of DSC.
1.1
Set to DSC Modulation test Mode.
1. Change the Test Mode to “DSC MOD”.
Press “-“ soft key to change the channel to CH70.
156.550
70
FSK
1.2
DSC MOD
LEVEL:050
FSK:1300HZ
PRESS OK
Testing Y-state / 1300Hz modulation
1. Press PTT then Y-State / 1300HZ Signal will be transmitted.
156.550
70
FSK
1.3
DSC MOD
LEVEL:050
FSK:1300HZ
PRESS OK
Testing B-state / 2100Hz modulation
1. Press “FSK” softkey to change FSK signal to the B-state.
2. Press PTT then B-State / 2100HZ Signal will be transmitted.
156.550
70
FSK
1.4
DSC MOD
LEVEL:050
FSK:2100HZ
PRESS OK
Testing continuous Y-state and B-state.
1. Press “FSK” softkey to change FSK signal to continuous mode.
2. Press PTT then continuous signal will be tranmitted.
156.550
70
FSK
DSC MOD
LEVEL:050
FSK:CONTINU
PRESS OK
2 Testing of FSK modulation of ATIS.
2.1
Set to ATIS Modulation test Mode.
1. Change the Test Mode to “ATIS MOD”.
Press “+“ or “-“ soft key to change the channel to CH01,CH02 or CH03.
156.800
02
ATIS MOD
LEVEL:050
FSK:1300HZ
PRESS OK
FSK
2.2
Testing Y-state / 1300Hz modulation
2. Press PTT then Y-State / 1300HZ Signal will be transmitted.
156.800
02
ATIS MOD
LEVEL:050
FSK:1300HZ
PRESS OK
FSK
2.3
Testing B-state / 2100Hz modulation
1. Press “FSK” softkey to change FSK signal to the B-state.
2. Press PTT then B-State / 2100HZ Signal will be transmitted.
156.800
02
ATIS MOD
LEVEL:050
FSK:2100HZ
PRESS OK
FSK
2.4
Testing continuous Y-state and B-state.
1. Press “FSK” softkey to change FSK signal to continuous mode.
2. Press PTT then continuous signal will be transmitted.
156.800
02
ATIS MOD
LEVEL:050
FSK:CONTINU
PRESS OK
FSK
2.5
Frequency of the Test Mode Channels are as follow.
CH01 : 156.050MHz
CH02 : 156.800MHz
CH03 : 157.425MHz
Testing ATIS transmission.
1. Press “FSK” softkey to change FSK signal to ATIS TX mode.
2. Press PTT then Y-State signal will be transmitted for 10 seconds.
156.800
02
FSK
ATIS MOD
LEVEL:050
FSK:ATIS TX
PRESS OK

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : Microsoft Word - VHF300_Instruction.doc
Creator                         : Administrator
Create Date                     : 2009:05:09 15:25:36+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:05:09 15:25:36+09:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:ed8af1d0-fc85-45b5-b353-6aa4355a1e17
Instance ID                     : uuid:f5b7806b-bea7-4bca-a310-5b94cb6ab7d8
Page Count                      : 6
Author                          : Administrator

EXIF Metadata provided by EXIF.tools