General Dynamics Broand P1DKF2 Wireless Broadband Modem User Manual Integration Instructions
General Dynamics Broadband, Inc. Wireless Broadband Modem Integration Instructions
Contents
- 1. User Manual
- 2. Integration Instructions
Integration Instructions
P1D Broadband Module Integration IPWireless P1D Module Integration Instructions DRAFT V00.02 21 March 2001 Proprietary Information Page 1 of 11 P1D Broadband Module Integration 21 March 2001 Proprietary Information Page 2 of 11 P1D Broadband Module Integration Contents General............................................................................................................................................ 5 1.1 Approvals and Dates ............................................................................................................... 5 1.2 Change Record ....................................................................................................................... 5 1.3 Acronyms ................................................................................................................................ 6 1.4 External References................................................................................................................ 6 Introduction ..................................................................................................................................... 7 2.1 Scope of Document................................................................................................................. 7 2.2 Overview of Module ................................................................................................................ 7 Module Connections ....................................................................................................................... 8 3.1 Data Interface J2 ..................................................................................................................... 8 3.1.1 Universal Serial Bus ........................................................................................................ 8 3.1.2 Ethernet ........................................................................................................................... 8 3.2 J2 Connector ........................................................................................................................... 8 3.2.1 Connector Type ............................................................................................................... 8 3.2.2 Pin Out ............................................................................................................................ 8 3.3 DC Power Input J1 .................................................................................................................. 9 3.4 Battery Contact J3 ................................................................................................................... 9 3.5 SIM Holder Socket 2 ............................................................................................................... 9 Mechanical .................................................................................................................................... 10 Regulatory Information .................................................................................................................. 11 5.1 Compliance with FCC Rules and Regulations ...................................................................... 11 5.2 Exposure to Radio Frequency Signals.................................................................................. 11 Figures Figure 1: P1D Module ........................................................................................................................... 10 Tables Table 1: 18 way Data Connector ............................................................................................................ 9 21 March 2001 Proprietary Information Page 3 of 11 P1D Broadband Module Integration 21 March 2001 Proprietary Information Page 4 of 11 P1D Broadband Module Integration 1.1 General Approvals and Dates Approval Date W. J. Jones 1.2 Change Record Date Version Author 06/11/2007 00.00 PFW New Document. 24/01/2007 00.01 PFW Update for external antenna. 05/02/2008 00.02 PFW Typographical changes. 21 March 2001 Reason For Change Issue Proprietary Information Page 5 of 11 P1D Broadband Module Integration 1.3 Acronyms Term Definition LED Light Emitting Diode MPE Maximum Permissible Exposure OEM Original Equipment Manufacturer P1D Phase 1D SIM Subscriber Identity Module TDD Time Division Duplex UMTS Universal Mobile Telephone System USB Universal Serial Bus 1.4 External References Ref () Number FCC Part 27 Note: Where a reference is undated, the latest version applies 21 March 2001 Title Proprietary Information Page 6 of 11 P1D Broadband Module Integration Introduction This document describes the method of integrating the IPWireless P1D Broadband module into an OEM product. 2.1 Scope of Document This document applies to the IPWireless P1D Broadband module only. 2.2 Overview of Module The IPWireless P1D Broadband module provides a complete UMTS TDD wireless modem solution and only requires the application of DC power and suitable data connection. The module is designed to minimise the time and resource required to integrate. 21 March 2001 Proprietary Information Page 7 of 11 P1D Broadband Module Integration Module Connections 3.1 Data Interface J2 The IPWireless P1D Broadband module is provided with an 18 pin data connector for connection to the external application. This connection supports the following interface types and these are described below. 3.1.1 Universal Serial Bus The data interface provides a USB 1.1 interface. This is available on pins 1-4 of the data connector. 3.1.2 Ethernet The data interface provides a 10Mbps Ethernet interface on pins 5-8, power is provided on pin 11 if a link active LED is required. 3.2 3.2.1 J2 Connector Connector Type The mating connector is a Matushita 18-W AXR30241B101. 3.2.2 Pin Out Connector Pin Description USB 5V In USB Ground USB D- USB D+ Ethernet RXP Ethernet RXN Ethernet TXP Ethernet TXN Not Used 10 Not Used 11 Ethernet Transformer Power 12 Serial RTS 13 Serial RXD 14 Serial DSR 21 March 2001 Proprietary Information Comment Page 8 of 11 P1D Broadband Module Integration 15 Serial CTS 16 Serial TXD 17 DTE Ground 18 Chassis Ground G1, G2 Chassis Ground Table 1: 18 way Data Connector 3.3 DC Power Input J1 The module requires a DC supply of 5VDC at upto 1A, the input voltage is required to be with ±5% of nominal voltage. The connector type is a standard DC plug for 0.65mm centre pin configured as centre positive. 3.4 Battery Contact J3 The module provides board contacts to allow an external battery pack to be used, connection to these contact is made using spring fingers. The recommended battery is a lithium ion pack nominal voltage 3.7VDC, capacity 650mAh. 3.5 SIM Holder Socket 2 The IPWireless P1D Broadband module supports SIM authentication if required. 21 March 2001 Proprietary Information Page 9 of 11 P1D Broadband Module Integration Mechanical The IPWireless P1D Broadband module is provided with 3 designated mounting points, the board should be rigidly mounted using stand-offs with a minimum clearance of 10mm from any other components. Figure 1: P1D Module 21 March 2001 Proprietary Information Page 10 of 11 P1D Broadband Module Integration 5.1 Regulatory Information Compliance with FCC Rules and Regulations The IPWireless P1D Broadband module is certified against FCC Part 27 for operation in the 24962690MHz frequency allocation. The module is certified under FCC ID: PKTP1DKF2 and is only certified for use with either an integral or external antenna, the maximum antenna gain allowed is defined on the FCC Grant of Certification. If the FCC ID is not visible from outside of the host device, then an additional label is required on outside of the host device stating ‘Contains FCC ID: PKTP1DKF2’ IMPORTANT: Manufacturers of devices containing the IPWireless P1D Broadband module are advised to 1. Clarify any regulatory questions. 2. Have their final product tested and approved for FCC compliance. 3. Include instructions with the final product regarding meeting RF Exposure requirements of the FCC rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not covered in this manual must be approved in writing by the Manufacturer. Changes or modifications made without written approval may void the user’s authority to operate this equipment. 5.2 Exposure to Radio Frequency Signals To comply with the FCC RF exposure rules, the UE P1D wireless broadband modem has been evaluated against the Maximum Permissible Exposure (MPE) limits defined in Section 1.1310 of the FCC rules for the uncontrolled environment. During normal operation, all persons should maintain a distance of at least 20cm from the antenna to ensure compliance with the MPE limits. 21 March 2001 Proprietary Information Page 11 of 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:02:05 14:07:09Z Create Date : 2008:02:05 14:07:09Z Format : application/pdf Title : Microsoft Word - FCC UE P1D Module Integration Instructions.doc Creator : pwarburg Document ID : uuid:9d897cd8-4a5d-4db8-9977-db1218d0cbf0 Instance ID : uuid:c6df4024-51e5-4988-b444-80518a2f3511 Page Count : 11 Author : pwarburgEXIF Metadata provided by EXIF.tools