HID Global 609XA Proximity Reader User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	259474
Application ID	dQ0VCEt9mhav/eQtuiN2Cg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	66.72kB (834049 bits)
Date Submitted	2002-07-29 00:00:00
Date Available	2002-07-29 00:00:00
Creation Date	2002-07-29 14:07:41
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2002-07-29 14:07:43
Document Title	Manual

Installation Guide
iCLASS™ Reader Models R10, R30, R40, RW300, RW400
PARTS INCLUDED
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
1 - iCLASS Reader
1 - Installation Manual
2 - 3.5mm x .6 pitch x 12mm Phillips machine screws
3 - #6-32 x .375” Phillips self-tapping machine screws
2 - #6 x 1.5” Phillips sheet metal screws
1 - #6 x .375” Spanner security screw, anti-tamper
Recommended:
•
•
•
•
•
•
Up to 9 wire splices
Cable, 5-9 conductor (Wieg. or RS232), 22awg shielded
Linear DC Power supply
Metal or plastic junction box
Magnetic switch - Ademco 945T, Sentrol 1038T, GRI 100T
or 110T or Aleph DC-2531
Security Tool (for anti-tamper screw) HID 04-0001-03
•
•
R10 (Mullion)……………..10 - 16VDC / 65-225mA
R30/RW300 (Euro)………10 - 16VDC / 80-260mA
R40/RW400 (US)………...10 - 16VDC / 80-260mA
Cable distance to Host…..Wiegand - 500 feet (152m) max
RS-232 - 50 ft (15m)
Temperature………………-35° C to 65°C
Open collector output…….sink - 40mA, source - 1mA
Standards:
•
•
•
Read/Write* capability in ISO 15693-2 mode with HID
iCLASS credentials
Read/Write* capability in ISO 14443-B2 mode with HID
rd
iCLASS 16Ks and other 3 party credentials
CSN read capability for ISO 14443-A1 with HID Mifare
rd
and other 3 party Mifare credentials
* R10, R30, R40 are read-only
INSTALLATION
1- Disassemble
1- Remove Screw
2 - Lift Bottom of Bezel
3 - Slide Bezel up and remove
4 - Lift top of Reader Assembly
5 - Slide down and remove
2- Install Tamper Switch
An internal magnet provides tamper indication when used with a magnetic reed switch connected to an external alarm
system. (Except R10). Locate Switch behind the left side of the mounting plate, centered between the mounting holes.
Electrical Back Box
Wall Surface
An ASSA ABLOY Group company
ASSA ABLOY
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – tech@hidcorp.com iClass™ Reader Installation Manual 6090-900 Rev 8 Page 1 of 3
Installation Guide
iCLASS™ Reader Models R10, R30, R40, RW300, RW400
3- Preparing/Mounting
Install Mounting Plate to wall surface or back box, then reassemble reader (reverse Step 1 procedure).
Dimensions are in inches (centimeters).
R10 Mounting Plate
R30/RW300 Mounting Plate
4- Connecting
Yellow
*Speaker
Blue
*Hold
Violet
***Open Collector
White
Data 1
Green
Data 0
Orange
*Green LED
Brown
*Red LED
Red
+DC (10-16 VDC)
Black
Ground
Gray
***RX (Serial Receive)
Red/Green
***DSR (Not Used)
Pink
***TX (Serial Transmit)
R40/RW400 Mounting Plate
5- Testing
•
Turn Power On - watch the sign-on LED and hear the
speaker tones sequence.
•
Use a Test Card - watch for the LED flash and hear the
Speaker tone for each card read.
6- Optional Features
•
RS232 interface/Host Mode - for applications requiring a
serial link. See Protocol Document 6090-902 for information
•
Open Collector Output – controls an external device
(13.8VDC Max) operating in Host Mode only. See iCLASS
Application Note for details
•
Configuration Options - Configure LED, Speaker, and other
features. See How To Order Guide or iCLASS Application
Note for details
An ASSA ABLOY Group company
ASSA ABLOY
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – tech@hidcorp.com iClass™ Reader Installation Manual 6090-900 Rev 8 Page 2 of 3
Installation Guide
iCLASS™ Reader Models R10, R30, R40, RW300, RW400
Red/Yellow
***DTR (Not Used)
Drain
**Shield Ground
* Optional Connections.
•
Hold Input – when asserted, this line either buffers a card
read or disables a card read until released, as configured.
** Drain wire can be data return line when a separate power supply is used.
*** Not used on R10, R30, R40
FCC WARNING:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. For proper regulatory compliance, the drain wire should not be connected to ground at the power supply
end of the cable. The reader is intended to be powered from a limited power source output of a previously certified power supply.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
An ASSA ABLOY Group company
ASSA ABLOY
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – tech@hidcorp.com iClass™ Reader Installation Manual 6090-900 Rev 8 Page 3 of 3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2002:07:29 14:07:41
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2002:07:29 14:07:43-04:00
Page Count                      : 3

EXIF Metadata provided by EXIF.tools