HUBSAN INTELLIGENT 501ARX HUBSAN X4 CAM BRUSHLESS WITH APP User Manual pt 2

Download:
Mirror Download [FCC.gov]
Document ID	3083057
Application ID	vIg/k+mWATRjMqoBqXqzxg==
Document Description	User Manual pt 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	275.99kB (3449840 bits)
Date Submitted	2016-08-01 00:00:00
Date Available	2016-08-01 00:00:00
Creation Date	2015-03-18 14:22:53
Producing Software	Adobe PDF library 10.01
Document Lastmod	2016-07-18 17:39:38
Document Title	说明书-低配版H109S公司标准英文版（16－25页）
Document Creator	Adobe Illustrator CS6 (Windows)

9. CALIBRATION
9.1 COMPASS CALIBRATION
Compass calibration is required before the first time flight, otherwise the system may not work
properly. The compass is very sensitive to electromagnetic interference which can cause
abnormal compass data and lead to poor flight performance or even flight failure. Regular
calibration enables the compass is in optimum performance.
Do not calibrate the compass in a strong magnetic field
Do not carry ferromagnetic materials with you while calibrating the compass,
such as keys, cell phones, etc.
COMPASS CALIBRATION PROCEDURES
Please follow the calibrating procedures before the first flight.
1) Push the left stick to the most left side, and move the right stick left to right quickly until the
transmitter displays "Calib compass 1"
2) Rotate the X4 horizontally clock-wise until the LCD screen displays " Calib compass 2"
3) Put the X4 nose down and rotate it vertically clock-wise until the " Calib compass 2" on screen
disappears.
4) Calibration done.
Move the right stick left to right
quickly, the LCD
screen displays “Calib compass 1”
Calibration done
START
Push the left stick to the
most left side
Put the X4 nose down and rotate
it counter clock-wise until
the ‘Calib compass 2” disappears
Rotate the X4 clock-wise
until the LCD screen displays
“Calib compass 2”
16
©2016
Hubsan
9.2 HORIZONTAL CALIBRATION
Horizontal calibration is required when the X4 is drift during flight.
Please follow the calibrating procedures:
1) Push the left stick to the most right side, and move the right stick left to right quickly until the 4
LED indicators blink in yellow slowly.
Move the right stick left to right
quickly
START
Push the left stick to the
most right side
Calibration done
2) Calibration succeeded when the 4 LED indicators stop blinking slowly.
9.3 ROTATION CALIBRATION
Rotation calibration is required when the X4 is yaw during flight.
Please follow the calibrating procedures and be sured that the X4 always on horizontal surface:
1) Push the left stick to the top side, and move the right stick up and down quickly until the 4 LED
indicators blink in yellow slowly
2) When the 4 LED indicators turns into red and blink circularly, rotate the X4 horizontally
clock-wise until the 4 LED indicators remain lighted in green
3) When the 4 LED indicators turns into red again, rotate the X4 horizontally clock-wise until the 4
LED indicators explosion-flashing simultaneously
4) Calibration done
Move the right stick up and down
quickly
START
Push the left stick to the top
side
Calibration done
Rotate the X4 clock-wise until
LED indicators explosion-flashing
simultaneously
17
©2016
Hubsan
Rotate the X4 clock-wise until LED
indicators remain lighted in green
10. TRANSMITTER STICK CALIBRATION
Mode 2: Push both sticks to the upper left corner and power on the transmitter simultaneously, the
LCD will display “Calibrate Stick Mode 2”, rotate both sticks in circles for three times, release both
sticks, then press any trim for 1.5 seconds until one “beep” heard which indicates a successful
calibration.
Mode 1: Push the left stick to the upper left corner and the right stick to the upper right corner and
power on the transmitter simultaneously, the LCD will display “Calibrate Stick Mode 1”, rotate both
sticks in circles for three times, release both sticks, then press any trim for 1.5 seconds until one
“beep” heard which indicates a successful calibration.
The transmitter mode can be shifted according to the above operation.
11. FREQUENCY SELECTABLE 5.8GHZ
The transmitter will automatically find the best frequency to ensure a live video with good
quality of transmission. Please re-select the frequency from 5730MHZ to 5845MHZ to get a
better video transmission when necessary.
Pull the throttle stick to the lowest position and press the Elevator stick for 1.5 second to enter
into the MAIN MENU interface. Push the Elevator stick up/down to select “5.8G Frequency”,
push the stick to the right to enter into the “ 5.8G frequency” interface, select a matched
frequency.
0:08:49 M2
MAIN MENU
Set Reverse
Set Sensitivity
5.8G Frequency
Set Manual
Fly When no GPS
Show Version
Exit
0:08:49
M2
5.8G FREQUENCY
Exit
5730MHZ
18
2016 Hubsan
12. X-HUBSAN APP
Download X-Hubsan APP in App Store or in Google Play.
12.1 APP HOME PAGE
Camera
Album
Map
【1】
【2】
【3】
Feedback
【4】
【1】Camera
: Click the icon to enter into camera interface.
【2】Album
: To view HD videos and pictures.
【3】Map
: Click the icon to enter into the map interface.
【4】Feedback
: For users to submit suggestions.
12.2 CAMERA
In the camera interface，you can take and view all pictures/ videos you took with the HD
camera.
【1】
【2】
【3】
【4】 【5】【6】【7】 【8】
Connected
Battery
capacity
【14】
【10】
【11】
【12】
【13】
19
©2016
Hubsan
【9】
【1】HOME PAGE
: Click the icon to go back to home page.
【2】FLIGHT DATA
Pitch: Pitch angle during flight.
Roll: Roll angle during flight.
Yaw: Yaw angle during filght.
Altitude: Vertical height from the ground.
Distance: Horizontal distance between quadcopter and control device.
Speed: Current flight speed.
: Display the longitude and latitude of the quadcopter.
: Display the longitude and latitude of the control device.
【3】X4 STATUS BAR
Connected
: Display status of quadcopter and warnings. Quadcopter is connected when this
icon is in blue.
【4】GPS SINGAL
: Display the current GPS signal.
【5】VIDEO SIGNAL
: Display the signal of FPV transmission.
【6】TRANSMITTER SIGNAL
: Display the connection signal between quadcopter and control device.
【7】POWER
: Display the quadcopter battery level. For safety, please land the quadcopter when the battery is low.
【8】SETTINGS
: Click the icon to adjust flight settings according to personal preferences.
【9】CAMERA
: Tap the icon to view pictures and videos.
: Tap the icon to take pictures and videos.
: Tap the icon to shift between picture mode and video mode.
【10】TRANSMITTER MODE
Default setup is stick mode, tap the screen, the sticks will show on the screen and use the
sticks to control quadcopter.
: Click the icon, it will shift to
is not available.
, and enter into waypoint mode. The tansmitter mode
【11】HEADLESS MODE
: Click the icon to enter/exit headless mode.
【12】RETURN TO HOME
: Click the icon to turn on/off RTH mode.When RTH mode is activated, the quadcopter
will fly back to the takeoff point automatically.
【13】ARM/DISARM MOTORS
: Click the icon and slide the screen as instructed to arm the motors.
After quadcopter took off, click the icon again and slide the screen as instructed to
disarm the motors and land the quadcopter.
©2016 Hubsan
20
【14】Map Thumbnail Window
: Tap the thumbnail window to enter into map interface.
12.3 WAYPOINT MODE
Waypoint mode can be activated/deactivated in the map interface, which allows user to define
waypoints and make the quoadcopter to fly according to the user defined waypoints.
【4】
【5】
【6】
Connected
Battery
capacity
【7】
History
【3】
【1】
【2】
【1】Waypoint Mode
: Click the icon to set up user location as the center point of map.
Click the icon again, it will shift to
, and exit waypoint mode.
【2】Waypoint Setup
: Tap the icon to set the flight path.
: Tap the icon to set waypoint, and the flight path will be composed of waypoints in sequence.
: Tap the icon to delete all waypoint data.
: Tap the icon and then click one waypoint, you can detele it.
: Tap the icon to set the nose direction.
: Tap the icon to submit waypoint data to quadcopter.
: Click the icon, the quadcopter will fly according to waypoints.
Make sure to submit waypoints data after finished.
【3】History
History
: Click the icon to check flight record.
【4】Map Center
: Click the icon to set up user location as the center point of map.
【5】Map Mode
Normal Mode; Satellite Mode; Mixed Mode.
【6】Map Calibration
: Tap the icon, then long press the map to make calibration automatically.
【7】Camera Thumbnail Window
: Tap the thumbnail window to enter into camera interface.
21
©2016
Hubsan
EXPLODED VIEW
16
26
25
26
25
20
34
34
17
30
30
19
31
31
13
28
29
12
31
31
10
18
31
11
31
33
32
31
10
35
31
31
33
11
35
31
32
15
23
32
31
33
32
32
14
32
32
32
35
21
15
31
33
33
15
32
32
15
22
22
23
34
24
32
33
32
32
32
27
34
35
32
27
27
32
27
22
©2016
Hubsan
NO. PART NAME
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
23
QTY
Lower Body Shell
Main Control Board
Power Board
5.8 GHz Transmission PCBA
Compass PCBA
GPS Module
USB PCBA
Camera Module
ESC
Motor A
Motor B
Li-Po Battery
2.4G Attenna
5.8G Attenna
LED PCBA
Upper Body Shell
2.4GHz Shielding Case
Sponge
©2016
Hubsan
NO. PART NAME
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
QTY
Battery Cover
Canopy
Eye Lampshade
Motor A Lampshade
Motor B Lampshade
Lens Holder
Propeller A
Propeller B
Rubber Feet
Shielding Case
Sponge
Screw
Screw
10
Screw
16
Screw
Screw
Screw
16
H501S SPARE PART CHART
H109-04
H501S-01
H501S-22
H501S-02B
Battery
Cover- Black
H501S-02
Battery
Cover- White
H501S-03
Canopy
Rubber Feet
H501S-04
H501S-05
H501S-06
H501S-05B
H501S-06B
H501S-07
H501S-10
H501S-11
H501S-12
H501S-13
Body Shell
Set- White
Screw Set
H501S-08
Body Shell
Set- Black
Propeller
A- Gold
H501S-09
Propeller
B- Gold
Brushless
Motor B
PCB Module
H501S-14
H501S-15
H301S-11
H501S-18
H501S-19
H501S-20
Lipo Battery
2700MAh
Motor LED
Lampshade
Remote
ESC
Propeller
A- Black
Flight Control 5.8G Transmission
PCB Module
Module
Adapter
LED PCBA
H301S-12
Balance Charger
Propeller
B- Black
Brushless
Motor A
GPS Module Compass Module
H501S-16
U Wrench
H501S-17
Eye Lampshade
H501S-21
2.4G Receiver
Module
24
©2016
Hubsan
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the local dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
ENVIRONMENTALLY FRIENDLY DISPOSAL
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of
separately. The disposal at the communal collecting point via private persons is for free.
The owner of old appliances is responsible to bring the appliances to thise collecting
points or to similar collection points. With this little personal effort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
25
©2016
Hubsan
User manual is subject to change without prior notice due to
unforseen product upgrades.
Download the latest user manual from
WWW.HUBSAN.COM
VERSION 1.0 EN

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Create Date                     : 2015:03:18 14:22:53+09:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2016:07:18 17:39:38+08:00
Producer                        : Adobe PDF library 10.01
Title                           : 说明书-低配版H109S公司标准英文版（16－25页）

EXIF Metadata provided by EXIF.tools