HUBSAN INTELLIGENT 507DRX X4 STAR FPV User Manual 2 of 2
SHENZHEN HUBSAN INTELLIGENT COMPANY LIMITED X4 STAR FPV 2 of 2
Contents
- 1. User Manual (1 of 2)
- 2. User Manual (2 of 2)
User Manual (2 of 2)
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3263870 |
| Application ID | lHKS8EVbv3NnSk28oqrgWg== |
| Document Description | User Manual (2 of 2) |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 256.41kB (3205141 bits) |
| Date Submitted | 2017-01-18 00:00:00 |
| Date Available | 2017-01-18 00:00:00 |
| Creation Date | 2016-09-12 15:59:04 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2017-01-16 09:19:08 |
| Document Title | PP1000715_01-说明书-H502Dä¸æ–‡ç‰ˆè¯´æ˜Žä¹¦ |
| Document Creator | Adobe Illustrator CS6 (Windows) |
CONDITIONS WHICH ACTIVATE THE FAILSAFE MODE (1) Transmitter is powered off. (2) The flight distance is beyond the range of the transmitter’s signal transmission. (3) The transmitter’s signal was interrupted by some other strong electronic interference. Home Point: It is recorded when armed the motors with no less than 6 GPS satellites. To ensure that the X4 can return safely to its home point when signal is lost, fly the X4 in safe flight area. If the quantity of GPS satellites drops below six for more than 20 seconds while the X4 is returning home, the X4 will descend automatically. The X4 can not avoid obstacles automatically while in failsafe mode. When the power is low, please land the quadcopter in case of any damges RTH only works when the quadcopter and tranmitter have more than 6 GPS satellites. 16 ©2016 Hubsan 哈博森科技 版权所有 7. TRANSMITTER Quad copter’s battery capacity Recording time Transmitter’s Record/Camera SD Card battery capacity status X4 7.3V Voltage Tilt Angle Pitch Angle Nose Orientation 00:23:59 0.3m/s 1.5m 0m R 0 P 0 H 247 Speed Height Distance GPS Signal Quad copter’s GPS Transmitter’s GPS X4 GPS 6 GPS 6 N22.7914931 E:114.0479740 N:22.7914650 E:114.0479983 Altitude Trimming Latitude&Longitude The display keep updating according to different functions (eg:GPS Hold,Return Home,Follow me, Expert） LCD 11 GPS SW HOME 8 Photo 4 Elevator Trim (2) Elevator/Rudder Stick 9 Video 12 RTH SW 6 Throttle Trim (1) Throttle /Aileron Stick 7 Power SW 3 Aileron Trim 5 Rudder Trim 14 LED SW (MODE 1) 10 Video glasses socket No function 13 USB Plug LCD 11 GPS SW HOME 8 Photo 6 Throttle Trim 9 Video 12 RTH SW 4 Elevator Trim 2 Elevator/Aileron Stick 7 Power SW 3 Aileron Trim 1 Throttle /Rudder Stick 5 Rudder Trim 14 LED SW (MODE 2) 17 ©2016 Hubsan 哈博森科技 版权所有 7.1 INPUT KEY FUNCTION S/N (1) (2) Mode/ Control MODE 1 Throttle/Aileron Stick Function Push the stick forward or backward and the quadcopter will ascend or decend; Push the stick left or right and the quadcopter will fly left or right. Push the stick forward or backward and the quadcopter will fly MODE 1 Elevator/Rudder Stick forward or backward;Push the stick left or right and the quadcopter will rotate counter clockwise or clockwise. MODE 2 Throttle/ Rudder Stick Push the stick forward or backward and the quadcopter will ascend or decend; Push the stick left or right and the quadcopter will rotate counter clockwise or clockwise. Push the stick forward or backward and the quadcopter will fly forward or backward;Push the stick left or right and the quadcopter Elevator /Aileron Stick will fly left or right. MODE 2 Aileron Trim Aileron trim adjusts for left and right drift. Elevator Trim Elevator trim adjusts for forward and backward drift. Rudder Trim Rudder trim adjusts for drift of left and right rotation or yaw. Throttle Trim Throttle trim is normally left at neutral. Power Switch Push to turn on the transmitter. Push again to turn off. Photo Press the photo button to shoot photos. Video Press video button to start recording and press again to stop. 10 Video glasses socket 11 GPS SW Push the switch up, the bulit-in GPS will calculate the quad copter’s position and height and help to keep the quad copter in a stable hover (ONLY FOR OUTDOORS) 12 RTH SW Push the switch up, the quad copter will return to the home point automatically ( ONLY FOR OUTDOORS) 13 USB plug For upgrading the software 14 LED SW To turn on/off LED motor indicators 18 ©2016 Hubsan 哈博森科技 版权所有 Connect Hubsan video glasses (The video glass is not included) 7.2 INSTALL THE TX BATTERY PUSH PUSH Remove the cover Install 4 x AA batteries according to the correct polarities ● Do not mix old and new batteries ● Do not charge non-rechargeable battery. Close the cover ● Do not mix different types of batteries 7.3 REVERSING CHANNEL SETUP If you would like to reverse any of the stick functions due to personal preference then follow the instructions below. Be aware that it will change the controls back to front. Pull the throttle stick to the lowest position and long press the Pitch stick simultaneously to enter into MAIN MENU interface. Push the Elevator stick up/down to select “Set Reverse”. Select “Exit” to exit. 0:08:49 M2 MAIN MENU Set Reverse Set Sensitivity 5.8G Frequency Set Manual Fly When no GPS Show Version Exit 0:08:49 M2 SET REVERSE Exit Elevator Normal Aileron Normal Rudder Normal 7.4 SENSITIVITY SETUP If you would like to change the sensitivity of any of the stick functions then follow the instructions below. Pull the throttle stick to the lowest position and long press the Elevator stick to enter into the MAIN MENU interface. Push the Elevator stick up/down to select “Set Sensitivity”, push the stick right to enter into the “ set sensitivity” interface, select “Expert mode” or “ Normal mode”. Select” Exit” to exit. 19 ©2016 Hubsan 哈博森科技 版权所有 0:08:49 M2 0:08:49 MAIN MENU Set Reverse Set Sensitivity 5.8G Frequency Set Manual Fly When no GPS Show Version Exit M2 SET SENSITIVE Exit Expert mode Elevator : 100 Aileron : 100 Rudder : 100 Sensitivity default setting is in Expert Mode. 7.5 MANUAL MODE SETUP If you would like to make acrobatic flights, such as throwing, please switch off the GPS function and follow the instruction below to enter into the Manual mode Pull the throttle stick to the lowest position and long press the Elevator stick to enter into the MAIN MENU interface. Push the Elevator stick up/down to select “Set Manual”, push the stick right to enter into the “ SET MANUAL” interface, select “ON” (without altitude function) or “OFF” (with altitude function).Select” Exit” to exit. 0:08:49 M2 MAIN MENU Set Reverse Set Sensitivity 5.8G Frequency Set Manual Fly When no GPS Show Version Exit 0:08:49 M2 SET MANUAL Exit OFF Manual Mode default setting is OFF. Notice： 1. When the power on the transmitter runs low, the red LED will blink quickly and the LCD screen will turn black, also the transmitter and X4 may disconnect. Please replace with new batteries. 2. If the batteries in the transmitter runs low while flying the X4, you can still control the X4, please land the X4 and then replace batteries. 3. The Transmitter can only use 2S Lipo batteries, 4XAA batteries or NI-MH AA batteries, other batteries will damage the Transmitter. 20 ©2016 Hubsan 哈博森科技 版权所有 8. TRANSMITTER CALIBRATION Mode 2: Push both sticks to the upper left corner and power on the transmitter simultaneously until “Calibrate Stick Mode 2” displays on LCD, rotate both sticks in circles for three times, then release both sticks, press any trim for 1.5 seconds until the LED on the transmitter turns into solid green which indicates a successful calibration. Mode 1: Push the left stick to the upper left corner and the right stick to the upper right corner and power on the transmitter simultaneously until “Calibrate Stick Mode 1” displays on LCD, rotate both sticks in circles for three times, then release both sticks, press any trim for 1.5 seconds until the LED on the transmitter turns into solid green which indicates a successful calibration. The transmitter mode can be shifted according to the above operation. 9. FREQUENCY SELECTABLE 5.8GHZ The transmitter will automatically find the best frequency to ensure a live video with good quality of transmission. Please re-select the frequency from 5730MHZ to 5845MHZ to get a better video transmission when necessary. Pull the throttle stick to the lowest position and press the Elevator stick for 1.5 second to enter into the MAIN MENU interface. Push the Elevator stick up/down to select “5.8G Frequency”, push the stick to the right to enter into the “ 5.8G frequency” interface, select a matched frequency. 0:08:49 M2 0:08:49 M2 MAIN MENU Set Reverse Set Sensitivity 5.8G Frequency Set Manual Fly When no GPS Show Version Exit 5.8G FREQUENCY Exit 5730MHZ 21 ©2016 Hubsan 哈博森科技 版权所有 EXPLODED VIEW 22 ©2016 Hubsan 哈博森科技 版权所有 Motor B Motor A GPS Module 5.8 GHz Transmission Module Screw（PB1.4*3) Signal Isolation Membrane Upper Body Shell Lower Body Shell Battery Compartment Lampshade Li-Po Battery Camera Module Motor Shaft B Motor Shaft A Shaft Sleeve Motor Holder Rotary Gear Propeller A Propeller B Blue LED Red LED Compass Module Main Control Board Screw（PA1.4*4) Screw（PA1.4*5) Screw（PA1.4*6) Screw（PA2.0*5) Screw（PM1.4*5) Screw（PM1.4*5) 5.8G Attenna 2.4G Attenna 23 ©2016 Hubsan 哈博森科技 版权所有 H507D TROUBLESHOOTING 1. Cannot bind！ ① Check if the quadcopter and transmitter are powered on or not. ② Rebind the quadcopter and transmitter, please refer to the procedures instructed by point 5.3 in the manual. 2. Cannot arm the motors！ ① Check if the compass calibration is completed or not. ② Make sure the Home switch on transmitter is off. ③ Calibrate the transmitter. 3. No GPS Signal！ Make sure it’s for outdoors flight, and the flight environment should be open without tall buildings. 4. Altitude Hold do not work！ ① Check if the barameter parameters on transmitter are OK or not; ② Clibrate the transmitter. 5. Positioning do not work！ ① Check if the quadcopter is with more than 6 GPS satellites or not. ② Calibrate the transmitter. 6. Cannot take pictures or videos! ① Check if the Micro-SD card is inserted or not. ② Check if the Micro-SD card is formatted correctly or not (Format the Mirco-SD card before use, if the Micro-SD card is with FAT32, the card should be Class 4 or Class 4+) 7. Cannot fly back to Home Point! Be sure the GPS satellites are more than 6 before flying. 8. GPS signal lost! Check if there is any interference to quad or not, for example: high-tension cables, radio tower. 9. The quad or video shakes while flying ① Check the propellers, replace propellers if there is any broken or deformed; ② Check the screws on quadcopter are fixed in place or not; ③ Check the motor shaft is broken or not. 24 ©2016 Hubsan 哈博森科技 版权所有 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the local dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE, DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to thise collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. 25 ©2016 Hubsan 哈博森科技 版权所有 H507A TROUBLESHOOTING User manual is subject to change without prior notice due to unforseen product upgrades. WWW.HUBSAN.COM VERSION 1.0 EN 26 ©2016 Hubsan 哈博森科技 版权所有
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2016:09:12 15:59:04+09:00 Creator Tool : Adobe Illustrator CS6 (Windows) Modify Date : 2017:01:16 09:19:08+08:00 Metadata Date : 2017:01:16 09:19:08+08:00 Producer : Adobe PDF library 10.01 Format : application/pdf Title : PP1000715_01-说明书-H502D中文版说明书 Document ID : uuid:0268223b-cc0b-4953-8b2f-6ca0b9d8e266 Instance ID : uuid:58fbf5ea-9aa2-4f04-9469-79e8a8ad8a0b Has XFA : No Page Count : 11 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools