Hansol LCD B17BF-2 LCD Monitor User Manual ENG 700F

Hansol LCD Inc. LCD Monitor ENG 700F

Contents

users manual 1

Hansol Electronics Inc.VOLPrinted in KoreaPart No. 942217020001-01www.hansolel.co.kr17" TFT -LCD Color MonitorUSER'S MANUAL17"Printed on the recyclable paper H700TD(B17BF)
Parts 3Connection to Signal Source 4the range of control Angle 5Installing Monitor Driver 6Name and Function of Front 8Power Management Feature 10Adjusting OSD 11Standard Signal Table 18Specification 19Troubleshooting 20Warning 22Table of ContentsINFORMATION TO USER :This equipment has been tested and found to comply with the limits of a ClassB digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses and canradiate radio frequency energy and,if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation; if this equipment does cause harmful interference to radio ortelevision reception, which can be determined by determined by turning theequipment off and on, the user is encouraged to try to crrent the interference byone or more of the fllowing measures:1. Reorient/Relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit differencefrom that to which the recerver is connected.4. Consult the dealer or an experienced radio/TV technician for help.CAUTIONChanges or modifications not expressly approved by themanufacturer responsible for compliance could void the user's authority to operate the equipmentENERGY STARAs an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets energy Star guidelines for energy efficiency.
32PartsPartsLCD MonitorPlace the monitor to face the user and then adjust the monitor angle.Take a break (for about 10 minutes) at every hour during the work withmonitor. Refer to the following figure to take the correct posture. about 50cmClass-B EquipmentThis unit is registered to Class-B Equipment (allowable electromagnetic wave)and is suitable for use in all areas including residential area.Look down the monitorbelow the horizon.Relax shoulders and arms, and sit back on the chair.Adjust the monitor to prevent reflection.Adjust the monitor stand to acquire required angle.Keep feet flat on the ground.Maintain the arms horizontallyand place hands softly on the keyboard.Good Posture GuideRCA Cable (Pair) Stereo Cable S-VHS Cable12V-DC Adapter RemoteController/Battery User's Manual /Warranty Card CDSignal Cable Antenna Cable AC Power CableArm and Option Stand are optional.
54Applied ConnectionConnection to ComputerBasic Connection1. Use 220 V or 110 V. (Free Voltage)2. Connect monitor and computer via computer cable (See figure )3. Switch on power to monitor and computer.4. Installation is finished.1. Connect the adapter to "12V DC" input terminal.2. Connect the computer cable to PC1 and DVI3. Connect video (V1) connection cable or SVHS (V2) connection cable to DVD, VCR or camcorder.4. Connect audio output (computer, DVD, VCR or camcorder) to Audio In (L), Audio In (R) or Audio In (Stereo).5. Connect external audio system to Audio Out (Line).6. Connect headphone or earphone to H-Phone terminal. 7. Connect antenna or CATV connection cable to "Antenna" terminal.12V DC connection terminal Computer cableFor PCFor MacintoshUse adapter.Adapter for Macintosh (Optional)Refer to the table on the rear side ofthe optional Macintosh adapter andadjust DIP switch by the resolution ofthe monitor.
76Installing Monitor Driver1. Insert the CD in the CD-ROM driver. 2. "Installation Manager" window appears.(Or, double-click Install.exe in the CD-ROM driver folder using search function.) 3. Click "Driver Installation" icon.4. Select the model and click "OK".5. Select icm file of the model in the icm folder in CD-ROM driver, and then click "OK" button.6. Click "Exit" to close the installation.Automatic InstallationManual Installation1. Insert the CD in the CD-ROM driver.2. Click 'My Computer' and follow the procedure below.How to Adjust Monitor AngleHow to Default StandHow to Option StandRefer to page 28 for installation of VESA stand.Click 'Control Panel'. Click 'Display'. Click 'Settings'.Run (Click) Install at CD-ROM driver and select the product model to set the optimumdisplay in Window 95 or 98.Use the Driver CD provided.Download the latest driver from home page of Hansol Electronics Inc. (http://www.hansolel.co.kr).
Click 'Finish'.Click 'Next>'.98 9No image is displayed with LED blinking.Monitor is in power saving mode.Use mouse or keyboard to release power saving mode.No image is displayed without LED on.Power cable plug must be pulled out.Check the power plugs on monitor and on the wall.Power Management FeatureWhen not in use for a long period of time, the monitor automatically reduces its power consumption, meeting powersaving standards of EPA and NUTEK. The monitor is equipped with a power saving circuit that conforms to the world-standard Display Power ManagerSignalling (DPMS) mode of Video Electronics StandardAssociation (VESA).The power management feature requires that the video cardof the computer should support DPMS function. Status Color of LED Power ConsumptionNormal Green Normal PowerPause Amber/Blinking( 1 second interval )Power Cut Off Amber/Blinking( 2 second interval )Click 'Advanced..'. Click 'Next>'.Click 'Monitor'.Click 'Display a list of all...'.Click 'Next>'. Click 'Have Disk..'.Select the driver and click 'OK'. Click 'Next>'.3. Select Exit if the monitor model is changed, and then reboot Windows.10 W or Below5 W or Below

Navigation menu