Hansol LCD B17BF-2 LCD Monitor User Manual ENG 700F

Download:
Mirror Download [FCC.gov]
Document ID	299046
Application ID	Et0fhuxPxDPE9bMEcL1FDQ==
Document Description	users manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	111.14kB (1389220 bits)
Date Submitted	2003-01-27 00:00:00
Date Available	2003-01-27 00:00:00
Creation Date	2003-01-22 16:47:35
Producing Software	Acrobat Distiller 4.0.5 for Macintosh
Document Lastmod	2003-01-22 16:47:49
Document Title	ENG 700F
Document Creator	QuarkXPress: PSPrinter 8.3.1
Document Author:	¹ÌÇö

17" TFT-LCD Color Monitor
17"
VOL
Printed on the recyclable paper
www.hansolel.co.kr
Printed in Korea
Part No. 942217020001-01
Hansol Electronics Inc.
USER'S MANUAL
H700TD(B17BF)
INFORMATION TO USER :
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and can
radiate radio frequency energy and,if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by determined by turning the
equipment off and on, the user is encouraged to try to crrent the interference by
one or more of the fllowing measures:
1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
Table of Contents
Parts
Connection to Signal Source
the range of control Angle
Installing Monitor Driver
Name and Function of Front
Power Management Feature
10
Adjusting OSD
11
Standard Signal Table
18
Specification
19
Troubleshooting
20
Warning
22
3. Connect the equipment into an outlet on a circuit difference
from that to which the recerver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment
ENERGY STAR
As an ENERGY STAR partner, Hansol Electronics Inc.
has determined that this product meets energy Star guidelines
for energy efficiency.
Parts
Good Posture Guide
Parts
Place the monitor to face the user and then adjust the monitor angle.
Take a break (for about 10 minutes) at every hour during the work with
monitor.
Refer to the following figure to take the correct posture.
about 50cm
Look down the monitor
below the horizon.
Adjust the monitor to
prevent reflection.
LCD Monitor
Relax shoulders and arms,
and sit back on the chair.
Adjust the monitor stand
to acquire required angle.
Maintain the arms horizontally
and place hands softly on
the keyboard.
RCA Cable (Pair)
Signal Cable
Stereo Cable
Antenna Cable
S-VHS Cable
AC Power Cable
Keep feet flat on the ground.
12V-DC Adapter
Remote
Controller/Battery
User's Manual /
Warranty Card
CD
Class-B Equipment
This unit is registered to Class-B Equipment (allowable electromagnetic wave)
and is suitable for use in all areas including residential area.
Arm and Option Stand
are optional.
Connection to Computer
Basic Connection
12V DC connection
terminal
Computer cable
For PC
1. Connect the adapter to "12V DC" input terminal.
2. Connect the computer cable to PC1 and DVI
For Macintosh
3. Connect video (V1) connection cable or SVHS (V2) connection cable to
DVD, VCR or camcorder.
4. Connect audio output (computer, DVD, VCR or camcorder) to Audio In (L),
Audio In (R) or Audio In (Stereo).
5. Connect external audio system to Audio Out (Line).
6. Connect headphone or earphone to H-Phone terminal.
7. Connect antenna or CATV connection cable to "Antenna" terminal.
Use adapter.
Adapter for Macintosh (Optional)
Refer to the table on the rear side of
the optional Macintosh adapter and
adjust DIP switch by the resolution of
the monitor.
1. Use 220 V or 110 V. (Free Voltage)
2. Connect monitor and computer via computer cable (See figure
3. Switch on power to monitor and computer.
4. Installation is finished.
Applied Connection
How to Adjust Monitor Angle
How to Default Stand
Installing Monitor Driver
Run (Click) Install at CD-ROM driver and select the product model to set the optimum
display in Window 95 or 98.
Use the Driver CD provided.
Download the latest driver from home page of Hansol Electronics Inc.
(http://www.hansolel.co.kr).
Automatic Installation
1. Insert the CD in the CD-ROM driver.
2. "Installation Manager" window appears.
(Or, double-click Install.exe in the CD-ROM driver folder using search function.)
3. Click "Driver Installation" icon.
4. Select the model and click "OK".
5. Select icm file of the model in the icm folder in CD-ROM driver, and then click
"OK" button.
6. Click "Exit" to close the installation.
How to Option Stand
Manual Installation
Refer to page 28 for installation of VESA stand.
1. Insert the CD in the CD-ROM driver.
2. Click 'My Computer' and follow the procedure below.
Click 'Control Panel'.
Click 'Display'.
Click 'Settings'.
Power Management Feature
Click 'Advanced..'.
Click 'Next>'.
Click 'Monitor'.
Click 'Display a list of all...'.
Click 'Next>'.
Click 'Have Disk..'.
When not in use for a long period of time, the monitor
automatically reduces its power consumption, meeting power
saving standards of EPA and NUTEK.
The monitor is equipped with a power saving circuit that
conforms to the world-standard Display Power Manager
Signalling (DPMS) mode of Video Electronics Standard
Association (VESA).
The power management feature requires that the video card
of the computer should support DPMS function.
Status
Color of LED
Power Consumption
Normal
Pause
Green
Amber/Blinking
Normal Power
10 W or Below
( 1 second interval )
Power Cut Off
Amber/Blinking
5 W or Below
( 2 second interval )
Select the driver and click 'OK'.
Click 'Next>'.
No image is displayed with LED blinking.
Monitor is in power saving mode.
Use mouse or keyboard to release power saving mode.
No image is displayed without LED on.
Power cable plug must be pulled out.
Check the power plugs on monitor and on the wall.
Click 'Next>'.
Click 'Finish'.
3. Select Exit if the monitor model is changed, and then reboot Windows.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:01:22 16:47:49+09:00
Create Date                     : 2003:01:22 16:47:35+09:00
Title                           : ENG 700F
Author                          : ¹ÌÇö
Creator                         : QuarkXPress: PSPrinter 8.3.1
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Page Count                      : 6

EXIF Metadata provided by EXIF.tools