Hansol LCD B17BF-2 LCD Monitor User Manual ENG 700F

Download:
Mirror Download [FCC.gov]
Document ID	299047
Application ID	Et0fhuxPxDPE9bMEcL1FDQ==
Document Description	users manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	167.66kB (2095717 bits)
Date Submitted	2003-01-27 00:00:00
Date Available	2003-01-27 00:00:00
Creation Date	2003-01-22 16:48:14
Producing Software	Acrobat Distiller 4.0.5 for Macintosh
Document Lastmod	2003-01-22 16:48:27
Document Title	ENG 700F
Document Creator	QuarkXPress: PSPrinter 8.3.1
Document Author:	¹ÌÇö

Name and Function of Front Keys
Front panel
Functions
Power Switch
Power switch is located in the lower center of the monitor stand.
You can push the switch to turn on/off the power.
Power Saving LED
If the green LED around the power switch turns into blinking amber,
it indicates the monitor is in power saving mode.
If the amber LED keeps blinking and input signal LED is blinking, it indicates
the monitor does not support input video signal.
Signal Source LED
Each of the five LEDs (from left; PC1, DVI, TV, V1 and V2) over the power
switch indicates the source of the signal which the monitor displays.
On Screen Display (OSD) Function Button
OSD buttons on the front of the monitor perform the following functions.
VOL + KEY
MUTE KEY
SELECT KEY
VOL - KEY
AUTO/EXIT KEY
CH + KEY
MENU KEY
CH - KEY
POWER KEY
10
MUTE : Cut off sound
SELECT : Press this button, when OSD is displayed, to select the function the
cursor locates. If you press this button when OSD is not displayed,
monitor displays source of the signal in order.
DVI
TV
V1(Video
V2(S-VHS))
(PC1
AUTO/EXIT : Press this button, when OSD is not displayed, to perform automatic
setting. If you press this button when OSD is displayed, you can
switch the display to the previous OSD status.
MENU : Press this button to display menus.
POWER : Power switch.
CHANNEL : Press this button to select TV channel in TV mode when OSD is not
displayed. Or press the button, when OSD is displayed, to move the
cursor into the menus which you want. You can also display
information with this button when OSD is not displayed in PC mode.
VOLUME : Press this button to adjust volume of audio when OSD is not
displayed.
By pressing this button when OSD is displayed, you can adjust
gauge or select item.
11
Adjusting OSD While Using the PC
Adjusting Vertical Position
Adjusting Brightness
ADJUSTMENT
Adjust
BRIGHTNESS
ADJUSTMENT
100
CONTRAST
50
H-POSITION
50
V-POSITION
45
PHASE
40
Move to 'Ajust'
Color
Adjust
BRIGHTNESS
100
CONTRAST
50
H-POSITION
50
Setup
V-POSITION
45
PHASE
40
PIXEL FREQ.
50
Setup
Move to 'Ajust'
Color
Sound
PIXEL FREQ.
AUTO ADJ.
Use
PIP
Sound
AUTO ADJ.
Move to 'V-POSITION'
50
OFF
or
to adjust display upward or downward.
Move to 'BRIGHTNESS'
OFF
PIP
Use
to have the monitor darker, or
to brighter.
Adjusting Phase
Adjusting Contrast
ADJUSTMENT
Adjust
BRIGHTNESS
ADJUSTMENT
Adjust
BRIGHTNESS
100
CONTRAST
50
H-POSITION
50
V-POSITION
45
PHASE
40
Move to 'Ajust'
Color
Setup
Sound
100
CONTRAST
50
H-POSITION
50
V-POSITION
45
PHASE
40
Move to 'Ajust'
Color
Setup
Sound
PIXEL FREQ.
AUTO ADJ.
PIP
PIXEL FREQ.
AUTO ADJ.
Use
Move to 'CONTRAST'
50
Move to 'PHASE'
50
OFF
or
to correct fine trembling or video noise.
OFF
Use
PIP
or
to adjust contrast.
Adjusting Pixel Frequency
Adjusting Horizontal Position
ADJUSTMENT
Adjust
BRIGHTNESS
100
ADJUSTMENT
Adjust
BRIGHTNESS
50
H-POSITION
50
Setup
V-POSITION
45
PHASE
Sound
PIP
12
V-POSITION
45
PHASE
Sound
40
PIXEL FREQ.
50
Move to 'Ajust'
Move to 'PIXEL FREQ'
40
PIXEL FREQ.
AUTO ADJ.
50
Move to 'Ajust'
Color
Setup
50
H-POSITION
Color
100
CONTRAST
CONTRAST
Move to 'H-POSITION'
50
OFF
Use
or
to adjust display left or right.
AUTO ADJ.
PIP
OFF
If Auto Adjustment function fails to remove video noise,
or to remove vertical noise.
Use
(Adjusting phase is required after the adjustment of
Pixel Frequency.)
13
Auto Adjustment
Selecting Language
ADJUSTMENT
Adjust
SETUP
100
BRIGHTNESS
CONTRAST
50
H-POSITION
50
Adjust
LANGUAGE
Move to 'Ajust'
Color
Color
MODE RECALL
Move to 'Setup'
NO
SIGNAL SOURCE
Setup
V-POSITION
45
PHASE
40
Setup
Sound
PIXEL FREQ.
Move to 'AUTO ADJ'
50
AUTO ADJ.
ON
Use
to switch 'ON' the AUTO ADJ, and press SELECT
button.
PIP
OSD TURN OFF TIME
-10 SEC
OSD TRANSPARENCE
- 7 STEP
Sound
OSD H-POS
50
OSD V-POS
50
PIP
Move to 'LANGUAGE'
Use
In most cases, AUTO ADJUSTMENT adjusts display appropriately. Use PHASE or adjust PIXEL
FREQ. in accordance with graphic card to fine tune the display.
to select language in order.
Reset
Adjusting Color Tint
SETUP
Adjust
Move to 'Setup'
LANGUAGE
COLOR
Color
NO
SIGNAL SOURCE
Adjust
USER
9300K
6500K
Setup
Color
MODE RECALL
RED
GREEN
BLUE
43
-10 SEC
OSD TRANSPARENCE
- 7 STEP
Move to 'MODE RECALL'
Sound
49
Setup
OSD TURN OFF TIME
Move to 'COLOR'
50
Use
to select mode in order.
OSD H-POS
50
OSD V-POS
50
PIP
USER : Adjusting Color
Mode 1 : Default color
Mode 2 : Blue tone
Sound
PIP
Use
select 'YES' and then press SELECT button to
return to default setting.
Selecting Signal Source
Adjusting RGB Color
SETUP
Adjust
LANGUAGE
COLOR
Color
Adjust
USER
9300K
6500K
RED
50
GREEN
49
BLUE
43
Setup
Sound
14
OSD TURN OFF TIME
-10 SEC
OSD TRANSPARENCE
- 7 STEP
Sound
Setup
PIP
Move to 'Setup'
NO
SIGNAL SOURCE
Move to 'COLOR'
Color
MODE RECALL
Move to 'RED, GREEN, BLUE'
Use
or
PIP
OSD H-POS
50
OSD V-POS
50
Move to 'SIGNAL SOURCE'
Use
to select signal source in order.
to increase or decrease each color.
15
Setting OSD Turn Off Time
Selecting OSD Vertical Position
SETUP
Adjust
SETUP
LANGUAGE
Adjust
LANGUAGE
Color
Move to 'Setup'
MODE RECALL
Setup
OSD TURN OFF TIME
-10 SEC
OSD TRANSPARENCE
- 7 STEP
MODE RECALL
NO
Move to 'Setup'
SIGNAL SOURCE
SIGNAL SOURCE
Setup
Color
NO
OSD TURN OFF TIME
-10 SEC
OSD TRANSPARENCE
- 7 STEP
Sound
Move to 'OSD TURN OFF TIME'
Sound
OSD H-POS
50
OSD V-POS
50
PIP
OSD H-POS
50
OSD V-POS
50
PIP
Use
increase OSD Turn Off Time by second.
The function is used to set up the time to take to have
OSD disappeared after the adjustment.
Move to 'OSD V-POS'
Use
or
to adjust OSD position upward or downward.
Setting OSD Transparence
MUTE
SETUP
SOUND
Adjust
LANGUAGE
Adjust
OFF
MUTE
Color
MODE RECALL
Move to 'Setup'
NO
50
BASS
50
TREBLE
50
Move to 'Sound'
Color
SIGNAL SOURCE
Setup
VOLUME
OSD TURN OFF TIME
-10 SEC
OSD TRANSPARENCE
- 7 STEP
Setup
BILINGUAL
Sound
OSD H-POS
50
OSD V-POS
50
PIP
Move to 'OSD TRANSPARENCE'
Use
to adjust OSD transparence.
Move to 'MUTE'
Sound
Use
PIP
Selecting OSD Horizontal Position
to select On/Off.
Adjusting Volume
SOUND
SETUP
Adjust
MUTE
Adjust
OFF
LANGUAGE
Color
MODE RECALL
Move to 'Setup'
NO
Setup
OSD TURN OFF TIME
OSD TRANSPARENCE
-10 SEC
16
50
TREBLE
50
Move to 'Sound'
BILINGUAL
- 7 STEP
Sound
Move to 'OSD H-POS'
Sound
PIP
50
BASS
Color
SIGNAL SOURCE
Setup
VOLUME
OSD H-POS
50
OSD V-POS
50
Use
or
to adjust OSD position left or right.
Move to 'VOLUME'
PIP
Use
or
to increase or decrease volume.
17
Adjusting Bass
Optional Functions
Picture In Picture (PIP) function is not applied to some models.
PIP On/Off
SOUND
Adjust
OFF
MUTE
VOLUME
50
BASS
50
Move to 'Sound'
Color
PICTRUE IN PICTURE
Adjust
Setup
TREBLE
50
BILINGUAL
Color
Sound
Setup
Use
or
ON
PIP SOURCE
TV
Move to 'PIP'
PIP SIZE
Move to 'BASS'
PIP
PIP ON/OFF
to adjust bass.
PIP H-POS
15
PIP V-POS
80
Move to 'PIP ON/OFF'
Sound
PIP SOUND
OFF
PIP IMAGE
Adjusting Treble
Use
PIP
to select 'On' and then press SELECT button.
Setting PIP Signal Source
SOUND
Adjust
OFF
MUTE
VOLUME
50
BASS
50
TREBLE
50
Move to 'Sound'
Color
Setup
PICTRUE IN PICTURE
Adjust
Color
BILINGUAL
PIP ON/OFF
ON
PIP SOURCE
TV
Move to 'PIP'
PIP SIZE
Sound
Move to 'TREBLE'
Use
PIP
or
to adjust treble.
Setup
PIP H-POS
15
80
PIP V-POS
Sound
PIP SOUND
Move to 'PIP SOURCE'
OFF
PIP IMAGE
Selecting Bilingual
PIP
You can display TV, VIDEO or SVIDEO for PIP signal source.
Setting PIP Size
SOUND
Adjust
MUTE
OFF
VOLUME
50
BASS
50
Move to 'Sound'
Color
Setup
TREBLE
50
PICTRUE IN PICTURE
Adjust
Color
PIP ON/OFF
ON
PIP SOURCE
TV
Sound
Setup
Move to 'BILINGUAL'
PIP
PIP H-POS
15
80
PIP V-POS
Sound
PIP SOUND
Use
18
Move to 'PIP'
PIP SIZE
BILINGUAL
to select MONO, STEREO, or FOREIGN.
OFF
Move to 'PIP SIZE'
PIP IMAGE
PIP
You can set up PIP size to 'Small', 'Medium' or 'Large'.
19
Adjusting PIP Horizontal Position
Adjusting PIP Image
PICTRUE IN PICTURE
Adjust
Color
PIP ON/OFF
ON
PIP SOURCE
TV
Move to 'PIP'
Move to 'PIP'
Move to 'PIP IMAGE'
PIP SIZE
Setup
PIP H-POS
15
PIP V-POS
80
PICTRUE IN PICTURE
PICTRUE IN PICTURE
Adjust
Sound
PIP SOUND
Color
Move to 'PIP H-POS'
OFF
Setup
Use
or
ON
PIP SOURCE
TV
Adjust
Color
PIP SIZE
PIP IMAGE
PIP
PIP ON/OFF
to adjust PIP left or right.
ON
PIP SOURCE
TV
PIP SIZE
PIP H-POS
15
PIP V-POS
80
Setup
PIP H-POS
15
80
PIP V-POS
Sound
PIP SOUND
PIP ON/OFF
Sound
OFF
PIP SOUND
PIP IMAGE
OFF
PIP IMAGE
PIP
PIP
Adjusting PIP Vertical Position
Adjusting PIP Brightness
PICTRUE IN PICTURE
PIP IMAGE
Adjust
PIP ON/OFF
Color
PIP SOURCE
ON
Adjust
Move to 'PIP'
TV
Color
PIP SIZE
Setup
80
CONTRAST
50
SHARPNESS
COLOR TINT
50
COLOR TONE
50
Move to 'PIP'
Setup
80
PIP V-POS
Sound
Move to 'PIP V-POS'
OFF
Sound
Move to 'BRIGHTNESS'
PIP IMAGE
PIP
Use
or
to adjust PIP upward or downward.
Use
PIP
Adjusting PIP Sound
to adjust PIP Brightness.
PIP IMAGE
Adjust
PIP ON/OFF
ON
PIP SOURCE
TV
Move to 'PIP'
Color
PIP SIZE
Setup
or
Adjusting PIP Contrast
PICTRUE IN PICTURE
Adjust
Color
Move to
'PIP IMAGE'
15
PIP H-POS
PIP SOUND
BRIGHTNESS
PIP H-POS
15
PIP V-POS
80
Setup
BRIGHTNESS
80
CONTRAST
50
SHARPNESS
COLOR TINT
50
COLOR TONE
50
Move to 'PIP'
Move to
'PIP IMAGE'
Sound
Sound
PIP SOUND
Move to 'PIP SOUND'
OFF
Move to 'CONTRAST'
PIP IMAGE
PIP
20
Use
to switch On/Off the PIP sound.
PIP
Use
or
to adjust PIP Contrast.
21
Adjusting PIP Sharpness
Adjusting OSD While Using
the TV & Video
PIP IMAGE
Adjust
Color
Setup
BRIGHTNESS
80
CONTRAST
50
SHARPNESS
COLOR TINT
50
COLOR TONE
50
Move to 'PIP'
Adjusting Channel
Move to
'PIP IMAGE'
CHANNEL
CHANNEL
Move to 'CHANNEL'
Sound
Move to 'SHARPNESS'
Adjust
ADD/DEL SELECT
FLNE TUNE
PIP
Use
or
to adjust PIP Sharpness.
Setup
50
AUTO SERCH
OFF
TYPE
Adjusting PIP Color Tint
Move to 'CHANNEL'
Sound
Use
Setup
to select channel.
Adding / Deleting Channel
PIP IMAGE
Adjust
Color
or
BRIGHTNESS
80
CONTRAST
50
SHARPNESS
COLOR TINT
50
COLOR TONE
50
Sound
Move to 'PIP'
Move to
'PIP IMAGE'
CHANNEL
CHANNEL
Adjust
FLNE TUNE
Move to 'COLOR TINT'
Setup
PIP
Use
or to adjust PIP Color Tint.
(This will not affect the color quality of PC signal.)
Move to 'CHANNEL'
ADD/DEL SELECT
AUTO SERCH
50
OFF
Move to 'ADD / DEL SELECT'
TYPE
Sound
Use
Adjusting PIP Color Tone
or
to add/delete channel.
When signal is weak or the channel is not used for broadcasting, it is available to add or delete the channel.
Fine Tuning
PIP IMAGE
Adjust
Color
Setup
BRIGHTNESS
80
CONTRAST
50
SHARPNESS
COLOR TINT
50
Move to 'PIP'
Move to
'PIP IMAGE'
CHANNEL
CHANNEL
Adjust
COLOR TONE
Sound
PIP
22
50
FLNE TUNE
Move to 'COLOR TONE'
Use
or to adjust PIP Color Tone.
(This will not affect the color quality of PC signal.)
Setup
AUTO SERCH
TYPE
Sound
Move to 'CHANNEL'
ADD/DEL SELECT
50
OFF
Move to 'FINE TUNE'
This function is used when some channels are not tuned due to
weak TV signal or a poor antenna receiver.
23
Auto Search
Hot Key
PC Mode
CHANNEL
CHANNEL
Adjust
FLNE TUNE
Setup
Move to 'CHANNEL'
ADD/DEL SELECT
AUTO SERCH
Information Display
50
Press CH button on the monitor to display information
(resolution, frequency and others).
OFF
Move to 'AUTO SEARCH'
TYPE
1) Hot key on the monitor
Sound
Use to select 'ON' button and then press SELECT
button, and the channel is searched automatically and saved.
Type
Auto Adjustment
Press AUTO/EXIT on the monitor front when OSD is not displayed to
perform Auto Adjustment.
2) Hot key on remote controller
Information Display
Press ENTER key on the remote controller to display information.
Zoom function in PC mode (controlled with remote controller only)
CHANNEL
CHANNEL
Adjust
FLNE TUNE
Setup
Move to 'CHANNEL'
ADD/DEL SELECT
AUTO SERCH
50
OFF
TYPE
Move to 'TYPE'
Sound
Use
Press ZOOM button again to adjust ZOOM location.
Press ZOOM button again to exit ZOOM OSD.
to select Cable/Air.
Refer to 'OSD function for PC' for 'Adjustment', 'Setup' and 'Sound' during TV and video
operation.
Press ZOOM button on the remote controller in PC mode to display
gauge in the lower center of the monitor.
Use and to adjust ZOOM size.
TV & Video Mode
1) Hot Key on the monitor
Press CH button in TV mode when OSD is not displayed, so that channel
number can be changed.
Press VOL button in TV or Video mode when OSD is not displayed, so
that volume may increase or decrease.
AUTO/EXIT button.
2) Hot Key on remote controller
Displaying information on TV mode
Press ENTER key on remote controller to display information
(current channel information).
Displaying information on Video mode
Press ENTER key on remote controller to display information
(current video input information).
24
25
Installing VESA and USB
Remote Controller
Installing VESA Stand
Conversion
Button
Power Button
Used to switch from
PC, V1, V2 or TV.
Mute Button
Menu Button
Used to adjust OSD.
Also used to exit from
OSD menu.
Channel Button
Used to change the
channel.
Zoom Button
Used to adjust
size and location
of zoom screen.
PIP (Optional function)
PIP On
PIP Size Adjust
PIP Off
Supporter for VESA
Arrange the VESA stand on supporter and fix with four screws.
Installing TUNER (Optional)
PIP function is optional.
PIP function is applied to some models.
Warning
To avoid exposition, replace the batteries correctly.
Use the batteries designated by a manufacturer or equivalent.
Dispose the batteries as the instruction of a manufacturer.
26
Install TUNER in the designated location in the rear side of the stand.
(Use dedicated TUNER from Hansol Electronics only.)
27
Installing Option Stand
1.ANALOG Standard Signal Table
The monitor is available for various VESA standard stands.
Follow the following instruction for VESA stand.
1. Place the monitor with its LCD
panel on the flat ground covered
with cushion or soft cloth.
3. Disassemble the stand.
2. Unscrew six screws.
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)
VGA
(720 400)
31.469
70.087
28.322
VGA
(640 480)
31.469
59.940
25.175
VGA
(640 480)
37.500
75.000
31.500
SVGA (800 600)
46.875
75.000
49.500
XGA (1024 768)
48.363
60.004
65.000
XGA (1024 768)
60.023
75.029
78.750
SXGA (1280 1024)
63.981
60.020
108.000
SXGA (1280 1024)
79.976
75.025
135.000
30.240
MAC
(640 480)
35.000
66.667
MAC
(832 624)
49.726
74.551
57.284
MAC (1152 870)
68.681
75.062
100.000
4. Locate the option stand on the
supporter.
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds
the maximum frequency of the monitor. Readjust resolution and frequency in accordance with the monitor capacity. (Refer to Standard
Signal Table)
5. Tighten four screws.
28
6. Stand the monitor and spread out
the stand bar.
29
2. DVI Standard Signal Table
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)
VGA
(720 400)
31.469
70.087
28.322
VGA
(640 480)
31.469
59.940
25.175
VGA
(640 480)
37.500
75.000
31.500
SVGA (800 600)
46.875
75.000
49.500
XGA (1024 768)
48.363
60.004
65.000
XGA (1024 768)
60.023
75.029
78.750
SXGA (1280 1024)
63.981
60.020
108.000
MAC
(640 480)
35.000
66.667
30.240
MAC
(832 624)
49.726
74.551
57.284
MAC (1152 870)
68.681
75.062
100.000
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds
the maximum frequency of the monitor. Readjust resolution and frequency in accordance with the monitor capacity. (Refer to Standard
Signal Table)
Specification
Model
LCD
Panel
(B17BF)
Type
Amorphous active matrix super TFT LCD
Screen Size
17" (Diagonal)
Maximum Resolution
A nalog : 1280 X 1024@75 Hz , DVI: 1280 * 1024@60Hz
Pixel Range
0.264 mm X 0.264 mm
Maximum Colors
16.7 M
Contrast Rate
200 : 1
Visual Angle
80째 / 80째 / 80째 / 80째 (Left / Right / Up / Down)
Response Speed
60 ms
Brightness
200 cd/m 2
Synchro Horizontal Frequency
nization Vertical Frequency
Video
Input
Power Consumption
Control key
Troubleshooting
Video Signal
Power LED is off.
No picture.
Message, "CABLE
DISCONNETED."
is displayed on the
screen.
Check if computer power is on.
80 kHz (Max.)
75 Hz (Min.)
Analog RGB (0.714 Vpp)
Screen looks to be run
down.
Maximum
47 W
Power Saving Mode
Under 5 W
Check the signal cable between monitor
and computer. (Refer to page 4)
Perform AUTO ADJUSTMENT.
Front Part
MUTE, SELECT, AUTO/EXIT, MENU,CH,
Screen is not clear.
Perform FREQUENCY ADJUSTMENT and
Adjust PHASE.
Switch off/on the monitor.
Remove accessories (Video extension
cable and others) and switch on.
Display is unstable and
trembling.
Check the resolution and frequency of
computer and video card, and set up the
again in reference to the current monitor
mode and standard signal mode table.
VOL SWITCH
Input: 85/265V (50~60 Hz), Output: 12V, 4.5A, 54W
TV
NTSC
Audio
3 Watt Speaker X 2 (Max.)
Video
CVBS, S-VHS
Wall Mount
VESA Standard
Safety Standard
Safety
Standard EMI
& EMI
FCC-B
Dimension Size and Weight
435 X 448 X 197 / 6.0 Kg
Low Radiation
30
Check the computer connection cable.
(Refer to page 4)
Synchronous Signal Mode H, V Separate TTL Sync, SOG, COMPOSITE
Power Adapter
MultiMedia
Check the power connection.
(Refer to page 4)
UL, CE, CB, TUV
MPR-II
Color is irregular.
Adjust COLOR at User Mode in OSD Color
Menu.
31
Warning
Double images or
'ghosts'.
Check the resolution and frequency of
computer and video card, and set up a
gain in reference to the current monitor
mode and standard signal mode table.
To prevent damage or loss, please read this warning carefully.
When connecting/disconnecting the plug, pull out
the plug itself, and never pull the plug to prevent fire
caused by short.
Picture is dark.
Adjust COLOR at User Mode in OSD Color
Menu.
To prevent electric shock, do not
connect/disconnect the plug with wet hand.
Picture is biased or cut
or too wide.
Power LED turns into
amber or blinking
amber.
Perform OSD ADJUSTMENT.
Perform AUTO ADJUSTMENT.
If you see smoke or smell something burning, stop
using the unit, switch off the power, pull out the plug,
and then contact your local service station.
AUTO / EXIT
VOL
Monitor is in power saving mode.
To prevent fire, do not connect a large number of
equipment in a single line.
No sound.
Dead sound.
Check the voice signal connection code or
adjust volume.
To prevent fire and electric shock, pull out the plug
in case of thunder and lightening.
Adjust BASS and TREBLE.
AUTO / EXIT
TV signal is not
received.
Check if the selected channel mode is in
accordance with the channel mode of the
area.
Select AUTO SEARCH to set up the
channel automatically.
32
VOL
AUTO / EXIT
VOL
To prevent fire and electric shock, do not try to take
the monitor apart or repair it yourself. Contact your
local service station or customer service center for
inspection, modification or repair.
33

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:01:22 16:48:27+09:00
Create Date                     : 2003:01:22 16:48:14+09:00
Title                           : ENG 700F
Author                          : ¹ÌÇö
Creator                         : QuarkXPress: PSPrinter 8.3.1
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Page Count                      : 13

EXIF Metadata provided by EXIF.tools