Hansol LCD B17BF-2 LCD Monitor User Manual ENG 700F
Hansol LCD Inc. LCD Monitor ENG 700F
Contents
- 1. users manual 1
- 2. users manual 2
users manual 2
1110
Power Switch
Power switch is located in the lower center of the monitor stand.
You can push the switch to turn on/off the power.
Power Saving LED
If the green LED around the power switch turns into blinking amber,
it indicates the monitor is in power saving mode.
If the amber LED keeps blinking and input signal LED is blinking, it indicates
the monitor does not support input video signal.
Signal Source LED
Each of the five LEDs (from left; PC1, DVI, TV, V1 and V2) over the power
switch indicates the source of the signal which the monitor displays.
On Screen Display (OSD) Function Button
OSD buttons on the front of the monitor perform the following functions.
MUTE : Cut off sound
SELECT : Press this button, when OSD is displayed, to select the function the
cursor locates. If you press this button when OSD is not displayed,
monitor displays source of the signal in order.
(PC1 DVI TV V1(Video V2(S-VHS
))
AUTO/EXIT : Press this button, when OSD is not displayed, to perform automatic
setting. If you press this button when OSD is displayed, you can
switch the display to the previous OSD status.
MENU : Press this button to display menus.
POWER : Power switch.
CHANNEL : Press this button to select TV channel in TV mode when OSD is not
displayed. Or press the button, when OSD is displayed, to move the
cursor into the menus which you want. You can also display
information with this button when OSD is not displayed in PC mode.
VOLUME : Press this button to adjust volume of audio when OSD is not
displayed.
By pressing this button when OSD is displayed, you can adjust
gauge or select item.
Functions
Name and Function of Front Keys
Front panel
MUTE KEY
SELECT
KEY
AUTO/EXIT KEY
MENU KEY
VOL
+
KEY
VOL
-
KEY
CH
+
KEY
CH
-
KEY
POWER KEY
Move to 'PIXEL FREQ'
Move to 'PHASE'
Move to 'Ajust'
Move to 'Ajust'
1312
Adjust
Color
Setup
Sound
ADJUSTMENT
BRIGHTNESS 100
50
50
45
40
50
CONTRAST
H-POSITION
V-POSITION
PHASE
PIXEL FREQ.
AUTO ADJ. OFF
PIP
Adjusting OSD While Using the PC
Adjusting Brightness
Adjusting Contrast
Adjusting Horizontal Position
Move to 'Ajust'
Move to 'Ajust'
Move to 'Ajust'
Move to 'BRIGHTNESS'
Use to have the monitor darker, or to brighter.
Adjust
Color
Setup
Sound
ADJUSTMENT
BRIGHTNESS 100
50
50
50
45
40
CONTRAST
H-POSITION
V-POSITION
PHASE
PIXEL FREQ.
AUTO ADJ. OFF
PIP
Move to 'CONTRAST'
Use or to adjust contrast.
Adjust
Color
Setup
Sound
ADJUSTMENT
BRIGHTNESS 100
50
50
45
40
50
CONTRAST
H-POSITION
V-POSITION
PHASE
PIXEL FREQ.
AUTO ADJ. OFF
PIP
Use or to adjust display left or right.
Adjust
Color
Setup
Sound
ADJUSTMENT
BRIGHTNESS 100
50
50
45
40
50
CONTRAST
H-POSITION
V-POSITION
PHASE
PIXEL FREQ.
AUTO ADJ. OFF
PIP
Adjusting Vertical Position
Adjusting Phase
Adjusting Pixel Frequency
Move to 'V-POSITION'
Use or to adjust display upward or downward.
Adjust
Color
Setup
Sound
ADJUSTMENT
BRIGHTNESS 100
50
50
50
40
45
CONTRAST
H-POSITION
V-POSITION
PHASE
PIXEL FREQ.
AUTO ADJ. OFF
PIP
Use or to correct fine trembling or video noise.
BRIGHTNESS 100
50
50
50
40
45
CONTRAST
H-POSITION
V-POSITION
PHASE
Adjust
Color
Setup
Sound
ADJUSTMENT
PIXEL FREQ.
AUTO ADJ. OFF
PIP
If Auto Adjustment function fails to remove video noise,
Use or to remove vertical noise.
(Adjusting phase is required after the adjustment of
Pixel Frequency.)
Move to 'H-POSITION'
Move to 'Ajust'
1514
BRIGHTNESS 100
50
50
50
40
45
CONTRAST
H-POSITION
V-POSITION
PHASE
PIXEL FREQ.
Adjust
Color
Setup
Sound
ADJUSTMENT
AUTO ADJ. ON
PIP
Move to 'AUTO ADJ'
Use to switch 'ON' the AUTO ADJ, and press SELECT
button.
In most cases, AUTO ADJUSTMENT adjusts display appropriately. Use PHASE or adjust PIXEL
FREQ. in accordance with graphic card to fine tune the display.
Auto Adjustment
Adjusting Color Tint
Adjust
Color
Setup
Sound
COLOR
RED 50
43
49
GREEN
BLUE
PIP
USER 9300K 6500K
Move to 'COLOR'
Move to 'COLOR'
Move to 'RED, GREEN, BLUE'
Use to select mode in order.
USER : Adjusting Color
Mode 1 : Default color
Mode 2 : Blue tone
Adjusting RGB Color
Adjust
Color
Setup
Sound
COLOR
RED 50
43
49
GREEN
BLUE
PIP
USER 9300K 6500K
Use or to increase or decrease each color.
Adjust
Color
Setup
Sound
SETUP
LANGUAGE
50
50
MODE RECALL
SIGNAL SOURCE
OSD TURN OFF TIME
OSD TRANSPARENCE - 7 STEP
-10 SEC
NO
OSD H-POS
OSD V-POS
PIP
Selecting Language
Reset
Selecting Signal Source
Move to 'Setup'
Move to 'Setup'
Move to 'Setup'
Move to 'SIGNAL SOURCE'
Move to 'LANGUAGE'
Use to select language in order.
50
50
- 7 STEP
-10 SEC
Adjust
Color
Setup
Sound
SETUP
LANGUAGE
MODE RECALL
SIGNAL SOURCE
OSD TURN OFF TIME
OSD TRANSPARENCE
NO
OSD H-POS
OSD V-POS
PIP
Use select 'YES' and then press SELECT button to
return to default setting.
50
50
- 7 STEP
-10 SEC
Adjust
Color
Setup
Sound
SETUP
LANGUAGE
MODE RECALL
SIGNAL SOURCE
OSD TURN OFF TIME
OSD TRANSPARENCE
NO
OSD H-POS
OSD V-POS
PIP
Use to select signal source in order.
Move to 'Ajust'
Move to 'MODE RECALL'
1716
50
50
- 7 STEP
-10 SEC
Adjust
Color
Setup
Sound
SETUP
LANGUAGE
MODE RECALL
SIGNAL SOURCE
OSD TURN OFF TIME
OSD TRANSPARENCE
NO
OSD H-POS
OSD V-POS
PIP
Setting OSD Turn Off Time
Use to adjust OSD transparence.
50
50
- 7 STEP
-10 SEC
Adjust
Color
Setup
Sound
SETUP
LANGUAGE
MODE RECALL
SIGNAL SOURCE
OSD TURN OFF TIME
OSD TRANSPARENCE
NO
OSD H-POS
OSD V-POS
PIP
Move to 'OSD TURN OFF TIME'
Use increase OSD Turn Off Time by second.
The function is used to set up the time to take to have
OSD disappeared after the adjustment.
50
50
- 7 STEP
-10 SEC
Adjust
Color
Setup
Sound
SETUP
LANGUAGE
MODE RECALL
SIGNAL SOURCE
OSD TURN OFF TIME
OSD TRANSPARENCE
NO
OSD H-POS
OSD V-POS
PIP
50
50
- 7 STEP
-10 SEC
Adjust
Color
Setup
Sound
SETUP
LANGUAGE
MODE RECALL
SIGNAL SOURCE
OSD TURN OFF TIME
OSD TRANSPARENCE
NO
OSD H-POS
OSD V-POS
PIP
Adjust
Color
Setup
Sound
SOUND
MUTE
50
50
50
VOLUME
BASS
TREBLE
BILINGUAL
PIP
OFF
Adjust
Color
Setup
Sound
SOUND
MUTE
50
50
50
VOLUME
BASS
TREBLE
BILINGUAL
PIP
OFF
Setting OSD Transparence
Use or to adjust OSD position left or right.
Selecting OSD Horizontal Position
Selecting OSD Vertical Position
MUTE
Use or to adjust OSD position upward or downward.
Move to 'MUTE'
Use to select On/Off.
Adjusting Volume
Use or to increase or decrease volume.
Move to 'Setup'
Move to 'OSD V-POS'
Move to 'Setup'
Move to 'Setup'
Move to 'OSD TRANSPARENCE'
Move to 'Setup'
Move to 'OSD H-POS'
Move to 'Sound'
Move to 'Sound'
Move to 'VOLUME'
Move to 'Sound'
Move to 'Sound'
Move to 'TREBLE'
Move to 'BILINGUAL'
1918
Adjust
Color
Setup
Sound
SOUND
MUTE
50
50
50
VOLUME
BASS
TREBLE
BILINGUAL
PIP
OFF
Selecting Bilingual
Adjust
Color
Setup
Sound
SOUND
MUTE
50
50
50
VOLUME
BASS
TREBLE
BILINGUAL
PIP
OFF
Adjust
Color
Setup
Sound
SOUND
MUTE
50
50
50
VOLUME
BASS
TREBLE
BILINGUAL
PIP
OFF
Use to select MONO, STEREO, or FOREIGN.
Adjusting Bass
Adjusting Treble
Use or to adjust treble.
Use or to adjust bass.
Adjust
Color
Setup
Sound
PICTRUE IN PICTURE
PIP ON/OFF
15
PIP SOURCE
PIP SIZE
PIP H-POS
PIP V-POS
PIP SOUND
80
PIP IMAGE
PIP
ON
OFF
TV
Setting PIP Size
15
80
Adjust
Color
Setup
Sound
PICTRUE IN PICTURE
PIP ON/OFF
PIP SOURCE
PIP SIZE
PIP H-POS
PIP V-POS
PIP SOUND
PIP IMAGE
PIP
ON
OFF
TV
Adjust
Color
Setup
Sound
PICTRUE IN PICTURE
PIP ON/OFF
PIP SOURCE
PIP SIZE
PIP H-POS
PIP V-POS
PIP SOUND
PIP IMAGE
PIP
15
80
ON
OFF
TV
Move to 'PIP SIZE'
You can set up PIP size to 'Small', 'Medium' or 'Large'.
PIP On/Off
Setting PIP Signal Source
You can display TV, VIDEO or SVIDEO for PIP signal source.
Move to 'PIP'
Move to 'PIP'
Move to 'PIP'
Move to 'PIP ON/OFF'
Move to 'PIP SOURCE'
Use to select 'On' and then press SELECT button.
Move to 'Sound'
Move to 'BASS'
Optional Functions
Picture In Picture (PIP) function is not applied to some models.
Move to 'PIP V-POS'
2120
Adjust
Color
Setup
Sound
PICTRUE IN PICTURE
PIP ON/OFF
PIP SOURCE
PIP SIZE
PIP H-POS
PIP V-POS
PIP SOUND
PIP IMAGE
PIP
15
80
ON
OFF
TV
Adjusting PIP Sound
Adjust
Color
Setup
Sound
PICTRUE IN PICTURE
PIP ON/OFF
PIP SOURCE
PIP SIZE
PIP H-POS
PIP V-POS
PIP SOUND
PIP IMAGE
PIP
15
80
ON
OFF
TV
Adjust
Color
Setup
Sound
PICTRUE IN PICTURE
PIP ON/OFF
PIP SOURCE
PIP SIZE
PIP H-POS
PIP V-POS
PIP SOUND
PIP IMAGE
PIP
15
80
ON
OFF
TV
Use to switch On/Off the PIP sound.
Adjusting PIP Horizontal Position
Adjusting PIP Vertical Position
Use or to adjust PIP upward or downward.
Use or to adjust PIP left or right.
Adjust
Color
Setup
Sound
PICTRUE IN PICTURE
PIP ON/OFF
15
PIP SOURCE
PIP SIZE
PIP H-POS
PIP V-POS
PIP SOUND
80
PIP IMAGE
PIP
ON
OFF
TV
Adjust
Color
Setup
Sound
PICTRUE IN PICTURE
PIP ON/OFF
15
PIP SOURCE
PIP SIZE
PIP H-POS
PIP V-POS
PIP SOUND
80
PIP IMAGE
PIP
ON
OFF
TV
Adjusting PIP Contrast
80
50
0
50
50
Adjust
Color
Setup
Sound
PIP IMAGE
PIP
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TINT
COLOR TONE
80
50
0
50
50
Adjust
Color
Setup
Sound
PIP IMAGE
PIP
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TINT
COLOR TONE
Adjusting PIP Image
Adjusting PIP Brightness
Move to 'BRIGHTNESS'
Use or to adjust PIP Brightness.
Use or to adjust PIP Contrast.
Move to 'PIP IMAGE'
Move to
'PIP IMAGE'
Move to 'PIP H-POS'
Move to 'PIP SOUND' Move to 'CONTRAST'
Move to
'PIP IMAGE'
Move to 'PIP' Move to 'PIP'
Move to 'PIP'
Move to 'PIP'
Move to 'PIP'
Move to 'PIP'
Move to 'CHANNEL'
Move to 'CHANNEL'
Move to 'FINE TUNE'
Move to 'ADD / DEL SELECT'
2322
Adjusting PIP Color Tone
80
50
0
50
50
Adjust
Color
Setup
Sound
PIP IMAGE
PIP
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TINT
COLOR TONE
80
50
0
50
50
Adjust
Color
Setup
Sound
PIP IMAGE
PIP
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TINT
COLOR TONE
Use or to adjust PIP Color Tone.
(This will not affect the color quality of PC signal.)
Adjusting PIP Sharpness
Adjusting PIP Color Tint
Use or to adjust PIP Color Tint.
(This will not affect the color quality of PC signal.)
80
50
0
50
50
Adjust
Color
Setup
Sound
PIP IMAGE
PIP
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TINT
COLOR TONE
Use or to adjust PIP Sharpness.
Fine Tuning
50
Adjust
Setup
Sound
CHANNEL
CHANNEL
ADD/DEL SELECT
FLNE TUNE
AUTO SERCH OFF
1
TYPE
50
1
Adjust
Setup
Sound
CHANNEL
CHANNEL
ADD/DEL SELECT
FLNE TUNE
AUTO SERCH OFF
TYPE
This function is used when some channels are not tuned due to
weak TV signal or a poor antenna receiver.
Adjusting Channel
Adding / Deleting Channel
Use or to add/delete channel.
Adjust
Setup
Sound
CHANNEL
CHANNEL
ADD/DEL SELECT
FLNE TUNE
AUTO SERCH OFF
50
1
TYPE
Move to 'CHANNEL'
Move to 'CHANNEL'
Use or to select channel.
Adjusting OSD While Using
the TV & Video
When signal is weak or the channel is not used for broadcasting, it is available to add or delete the channel.
Move to 'SHARPNESS'
Move to
'PIP IMAGE'
Move to 'COLOR TINT'
Move to
'PIP IMAGE'
Move to 'COLOR TONE'
Move to
'PIP IMAGE'
Move to 'PIP'
Move to 'PIP'
Move to 'PIP'
Move to 'AUTO SEARCH'
Move to 'TYPE'
2524
50
1
Adjust
Setup
Sound
CHANNEL
CHANNEL
ADD/DEL SELECT
FLNE TUNE
AUTO SERCH OFF
TYPE
Type
Auto Search
Use to select Cable/Air.
50
1
Adjust
Setup
Sound
CHANNEL
CHANNEL
ADD/DEL SELECT
FLNE TUNE
AUTO SERCH OFF
TYPE
Use to select 'ON' button and then press SELECT
button, and the channel is searched automatically and saved.
Hot Key
PC Mode
TV & Video Mode
1) Hot key on the monitor
Information Display
Press CH button on the monitor to display information
(resolution, frequency and others).
Auto Adjustment
Press AUTO/EXIT on the monitor front when OSD is not displayed to
perform Auto Adjustment.
2) Hot key on remote controller
Information Display
Press ENTER key on the remote controller to display information.
Zoom function in PC mode (controlled with remote controller only)
Press ZOOM button on the remote controller in PC mode to display
gauge in the lower center of the monitor.
Use and to adjust ZOOM size.
Press ZOOM button again to adjust ZOOM location.
Press ZOOM button again to exit ZOOM OSD.
1) Hot Key on the monitor
Press CH button in TV mode when OSD is not displayed, so that channel
number can be changed.
Press VOL button in TV or Video mode when OSD is not displayed, so
that volume may increase or decrease.
AUTO/EXIT button.
2) Hot Key on remote controller
Displaying information on TV mode
Press ENTER key on remote controller to display information
(current channel information).
Displaying information on Video mode
Press ENTER key on remote controller to display information
(current video input information).
Refer to 'OSD function for PC' for 'Adjustment', 'Setup' and 'Sound' during TV and video
operation.
Move to 'CHANNEL'
Move to 'CHANNEL'
2726
Installing VESA and USB
Installing VESA Stand
Supporter for VESA
Arrange the VESA stand on supporter and fix with four screws.
Installing TUNER (Optional)
Install TUNER in the designated location in the rear side of the stand.
(Use dedicated TUNER from Hansol Electronics only.)
Remote Controller
PIP function is optional.
PIP function is applied to some models.
Warning
To avoid exposition, replace the batteries correctly.
Use the batteries designated by a manufacturer or equivalent.
Dispose the batteries as the instruction of a manufacturer.
Conversion
Button
Used to switch from
PC, V1, V2 or TV.
Mute Button
Zoom Button
Power Button
Menu Button
Used to adjust OSD.
Also used to exit from
OSD menu.
Channel Button
Used to change the
channel.
PIP (Optional function)
PIP On
PIP Size Adjust
PIP Off
Used to adjust
size and location
of zoom screen.
2928
1.ANALOG Standard Signal Table
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds
the maximum frequency of the monitor. Readjust resolution and fre-
quency in accordance with the monitor capacity. (Refer to Standard
Signal Table)
VGA (720 400)
VGA (640 480)
VGA (640 480)
SVGA (800 600)
XGA (1024 768)
XGA (1024 768)
SXGA (1280 1024)
SXGA (1280 1024)
MAC (640 480)
MAC (832 624)
MAC (1152 870)
31.469
31.469
37.500
46.875
48.363
60.023
63.981
79.976
35.000
49.726
68.681
70.087
59.940
75.000
75.000
60.004
75.029
60.020
75.025
66.667
74.551
75.062
28.322
25.175
31.500
49.500
65.000
78.750
108.000
135.000
30.240
57.284
100.000
Installing Option Stand
The monitor is available for various VESA standard stands.
Follow the following instruction for VESA stand.
1. Place the monitor with its LCD
panel on the flat ground covered
with cushion or soft cloth.
2. Unscrew six screws.
3. Disassemble the stand. 4. Locate the option stand on the
supporter.
5. Tighten four screws. 6. Stand the monitor and spread out
the stand bar.
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)
VGA (720 400)
VGA (640 480)
VGA (640 480)
SVGA (800 600)
XGA (1024 768)
XGA (1024 768)
SXGA (1280 1024)
MAC (640 480)
MAC (832 624)
MAC (1152 870)
31.469
31.469
37.500
46.875
48.363
60.023
63.981
35.000
49.726
68.681
70.087
59.940
75.000
75.000
60.004
75.029
60.020
66.667
74.551
75.062
28.322
25.175
31.500
49.500
65.000
78.750
108.000
30.240
57.284
100.000
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)
2. DVI Standard Signal Table
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds
the maximum frequency of the monitor. Readjust resolution and fre-
quency in accordance with the monitor capacity. (Refer to Standard
Signal Table)
3130
Troubleshooting
Check the power connection.
(Refer to page 4)
Power LED is off.
No picture.
Check the signal cable between monitor
and computer. (Refer to page 4)
Perform AUTO ADJUSTMENT.
Check the computer connection cable.
(Refer to page 4)
Check if computer power is on.
Message, "CABLE
DISCONNETED."
is displayed on the
screen.
Screen looks to be run
down.
Perform FREQUENCY ADJUSTMENT and
Adjust PHASE.
Switch off/on the monitor.
Remove accessories (Video extension
cable and others) and switch on.
Screen is not clear.
Check the resolution and frequency of
computer and video card, and set up the
again in reference to the current monitor
mode and standard signal mode table.
Display is unstable and
trembling.
Type Amorphous active matrix super TFT LCD
Screen Size 17" (Diagonal)
Maximum ResolutionA
nalog : 1280 X 1024@75 Hz , DVI: 1280 * 1024@60Hz
Pixel Range
0.264 mm X 0.264 mm
Maximum Colors 16.7 M
Contrast Rate 200 : 1
Visual Angle 80° / 80° / 80° / 80° (Left / Right / Up / Down)
Response Speed 60 ms
Brightness 200 cd/m2
Horizontal Frequency 80 kHz (Max.)
Vertical Frequency75 Hz (Min.)
Video Signal Analog RGB (0.714 Vpp)
Synchronous Signal Mode H, V Separate TTL Sync, SOG, COMPOSITE
Maximum 47 W
Power Saving Mode Under 5 W
Front Part MUTE, SELECT, AUTO/EXIT, MENU,CH,
VOL SWITCH
Input
: 85/265V (50~60 Hz),
Output
: 12V, 4.5A, 54W
TV NTSC
Audio 3 Watt Speaker X 2 (Max.)
Video CVBS, S-VHS
Wall Mount VESA Standard
Safety Standard UL, CE, CB, TUV
EMI FCC-B
Low Radiation MPR-II
Size and Weight 435 X 448 X 197 / 6.0 Kg
Specification
LCD
Panel
Synchro
nization
Model(B17BF)
Video
Input
Power Consumption
Control key
Multi-
Media
Safety
Standard
& EMI
Dimension
Power Adapter
Adjust COLOR at User Mode in OSD Color
Menu.
Color is irregular.
Check the resolution and frequency of
computer and video card, and set up a
gain in reference to the current monitor
mode and standard signal mode table.
Double images or
'ghosts'.
3332
Warning
To prevent damage or loss, please read this warning carefully.
When connecting/disconnecting the plug, pull out
the plug itself, and never pull the plug to prevent fire
caused by short.
To prevent electric shock, do not
connect/disconnect the plug with wet hand.
To prevent fire, do not connect a large number of
equipment in a single line.
To prevent fire and electric shock, pull out the plug
in case of thunder and lightening.
To prevent fire and electric shock, do not try to take
the monitor apart or repair it yourself. Contact your
local service station or customer service center for
inspection, modification or repair.
AUTO / EXIT VOL
AUTO / EXIT VOL
AUTO / EXIT VOL
If you see smoke or smell something burning, stop
using the unit, switch off the power, pull out the plug,
and then contact your local service station.
Perform OSD ADJUSTMENT.
Perform AUTO ADJUSTMENT.
Adjust COLOR at User Mode in OSD Color
Menu.
Picture is dark.
Picture is biased or cut
or too wide.
Check the voice signal connection code or
adjust volume.
No sound.
Adjust BASS and TREBLE.
Dead sound.
Check if the selected channel mode is in
accordance with the channel mode of the
area.
Select AUTO SEARCH to set up the
channel automatically.
TV signal is not
received.
Monitor is in power saving mode.
Power LED turns into
amber or blinking
amber.