Hansol LCD B17BF-2 LCD Monitor User Manual ENG 700F

Hansol LCD Inc. LCD Monitor ENG 700F

Contents

users manual 2

1110Power SwitchPower switch is located in the lower center of the monitor stand.You can push the switch to turn on/off the power.Power Saving LEDIf the green LED around the power switch turns into blinking amber, it indicates the monitor is in power saving mode.If the amber LED keeps blinking and input signal LED is blinking, it indicatesthe monitor does not support input video signal.Signal Source LEDEach of the five LEDs (from left; PC1, DVI, TV, V1 and V2) over the powerswitch indicates the source of the signal which the monitor displays. On Screen Display (OSD) Function ButtonOSD buttons on the front of the monitor perform the following functions.MUTE : Cut off soundSELECT : Press this button, when OSD is displayed, to select the function the cursor locates. If you press this button when OSD is not displayed, monitor displays source of the signal in order.(PC1 DVI TV V1(Video V2(S-VHS))AUTO/EXIT : Press this button, when OSD is not displayed, to perform automaticsetting. If you press this button when OSD is displayed, you can switch the display to the previous OSD status. MENU : Press this button to display menus.POWER : Power switch.CHANNEL : Press this button to select TV channel in TV mode when OSD is not displayed. Or press the button, when OSD is displayed, to move the cursor into the menus which you want. You can also display information with this button when OSD is not displayed in PC mode.VOLUME : Press this button to adjust volume of audio when OSD is not displayed.By pressing this button when OSD is displayed, you can adjust gauge or select item. FunctionsName and Function of Front Keys Front panelMUTE KEYSELECT KEYAUTO/EXIT KEYMENU KEYVOL+KEYVOL-KEYCH+KEYCH -KEYPOWER KEY
Move to 'PIXEL FREQ'Move to 'PHASE'Move to 'Ajust'Move to 'Ajust'1312AdjustColorSetupSoundADJUSTMENTBRIGHTNESS 1005050454050CONTRASTH-POSITIONV-POSITIONPHASEPIXEL FREQ.AUTO ADJ. OFFPIPAdjusting OSD While Using the PCAdjusting BrightnessAdjusting ContrastAdjusting Horizontal PositionMove to 'Ajust'Move to 'Ajust'Move to 'Ajust'Move to 'BRIGHTNESS'Use to have the monitor darker, or to brighter.AdjustColorSetupSoundADJUSTMENTBRIGHTNESS 1005050504540CONTRASTH-POSITIONV-POSITIONPHASEPIXEL FREQ.AUTO ADJ. OFFPIPMove to 'CONTRAST'Use or to adjust contrast.AdjustColorSetupSoundADJUSTMENTBRIGHTNESS 1005050454050CONTRASTH-POSITIONV-POSITIONPHASEPIXEL FREQ.AUTO ADJ. OFFPIPUse or to adjust display left or right.AdjustColorSetupSoundADJUSTMENTBRIGHTNESS 1005050454050CONTRASTH-POSITIONV-POSITIONPHASEPIXEL FREQ.AUTO ADJ. OFFPIPAdjusting Vertical PositionAdjusting PhaseAdjusting Pixel FrequencyMove to 'V-POSITION'Use or to adjust display upward or downward.AdjustColorSetupSoundADJUSTMENTBRIGHTNESS 1005050504045CONTRASTH-POSITIONV-POSITIONPHASEPIXEL FREQ.AUTO ADJ. OFFPIPUse or to correct fine trembling or video noise. BRIGHTNESS 1005050504045CONTRASTH-POSITIONV-POSITIONPHASEAdjustColorSetupSoundADJUSTMENTPIXEL FREQ.AUTO ADJ. OFFPIPIf Auto Adjustment function fails to remove video noise, Use or to remove vertical noise. (Adjusting phase is required after the adjustment of Pixel Frequency.) Move to 'H-POSITION'Move to 'Ajust'
1514BRIGHTNESS 1005050504045CONTRASTH-POSITIONV-POSITIONPHASEPIXEL FREQ.AdjustColorSetupSoundADJUSTMENTAUTO ADJ. ONPIPMove to 'AUTO ADJ'Use to switch 'ON' the AUTO ADJ, and press SELECT button. In most cases, AUTO ADJUSTMENT adjusts display appropriately. Use PHASE or adjust PIXELFREQ. in accordance with graphic card to fine tune the display.Auto AdjustmentAdjusting Color TintAdjustColorSetupSoundCOLORRED 504349GREENBLUEPIPUSER 9300K 6500KMove to 'COLOR'Move to 'COLOR'Move to 'RED, GREEN, BLUE'Use to select mode in order.USER : Adjusting ColorMode 1 : Default colorMode 2 : Blue toneAdjusting RGB ColorAdjustColorSetupSoundCOLORRED 504349GREENBLUEPIPUSER 9300K 6500KUse or to increase or decrease each color.AdjustColorSetupSoundSETUPLANGUAGE5050MODE RECALLSIGNAL SOURCEOSD TURN OFF TIMEOSD TRANSPARENCE - 7 STEP-10 SECNOOSD H-POSOSD V-POSPIPSelecting LanguageResetSelecting Signal SourceMove to 'Setup'Move to 'Setup'Move to 'Setup'Move to 'SIGNAL SOURCE'Move to 'LANGUAGE'Use to select language in order.5050- 7 STEP-10 SECAdjustColorSetupSoundSETUPLANGUAGEMODE RECALLSIGNAL SOURCEOSD TURN OFF TIMEOSD TRANSPARENCENOOSD H-POSOSD V-POSPIPUse select 'YES' and then press SELECT button to return to default setting.5050- 7 STEP-10 SECAdjustColorSetupSoundSETUPLANGUAGEMODE RECALLSIGNAL SOURCEOSD TURN OFF TIMEOSD TRANSPARENCENOOSD H-POSOSD V-POSPIPUse to select signal source in order.Move to 'Ajust'Move to 'MODE RECALL'
17165050- 7 STEP-10 SECAdjustColorSetupSoundSETUPLANGUAGEMODE RECALLSIGNAL SOURCEOSD TURN OFF TIMEOSD TRANSPARENCENOOSD H-POSOSD V-POSPIPSetting OSD Turn Off TimeUse to adjust OSD transparence.5050- 7 STEP-10 SECAdjustColorSetupSoundSETUPLANGUAGEMODE RECALLSIGNAL SOURCEOSD TURN OFF TIMEOSD TRANSPARENCENOOSD H-POSOSD V-POS PIPMove to 'OSD TURN OFF TIME'Use increase OSD Turn Off Time by second. The function is used to set up the time to take to have OSD disappeared after the adjustment.5050- 7 STEP-10 SECAdjustColorSetupSoundSETUPLANGUAGEMODE RECALLSIGNAL SOURCEOSD TURN OFF TIMEOSD TRANSPARENCENOOSD H-POSOSD V-POSPIP5050- 7 STEP-10 SECAdjustColorSetupSoundSETUPLANGUAGEMODE RECALLSIGNAL SOURCEOSD TURN OFF TIMEOSD TRANSPARENCENOOSD H-POSOSD V-POSPIPAdjustColorSetupSoundSOUNDMUTE505050VOLUMEBASSTREBLEBILINGUALPIPOFFAdjustColorSetupSoundSOUNDMUTE505050VOLUMEBASSTREBLEBILINGUALPIPOFFSetting OSD TransparenceUse or to adjust OSD position left or right.Selecting OSD Horizontal PositionSelecting OSD Vertical PositionMUTEUse or to adjust OSD position upward or downward.Move to 'MUTE'Use to select On/Off.Adjusting VolumeUse or to increase or decrease volume.Move to 'Setup'Move to 'OSD V-POS'Move to 'Setup'Move to 'Setup'Move to 'OSD TRANSPARENCE'Move to 'Setup'Move to 'OSD H-POS'Move to 'Sound'Move to 'Sound'Move to 'VOLUME'
Move to 'Sound'Move to 'Sound'Move to 'TREBLE'Move to 'BILINGUAL'1918AdjustColorSetupSoundSOUNDMUTE505050VOLUMEBASSTREBLEBILINGUALPIPOFFSelecting BilingualAdjustColorSetupSoundSOUNDMUTE505050VOLUMEBASSTREBLEBILINGUALPIPOFFAdjustColorSetupSoundSOUNDMUTE505050VOLUMEBASSTREBLEBILINGUALPIPOFFUse to select MONO, STEREO, or FOREIGN.Adjusting BassAdjusting TrebleUse or to adjust treble.Use or to adjust bass.AdjustColorSetupSoundPICTRUE IN PICTUREPIP ON/OFF15PIP SOURCEPIP SIZEPIP H-POSPIP V-POSPIP SOUND80PIP IMAGEPIPONOFFTVSetting PIP Size1580AdjustColorSetupSoundPICTRUE IN PICTUREPIP ON/OFFPIP SOURCEPIP SIZEPIP H-POSPIP V-POSPIP SOUNDPIP IMAGEPIPONOFFTVAdjustColorSetupSoundPICTRUE IN PICTUREPIP ON/OFFPIP SOURCEPIP SIZEPIP H-POSPIP V-POSPIP SOUNDPIP IMAGEPIP1580ONOFFTVMove to 'PIP SIZE'You can set up PIP size to 'Small', 'Medium' or 'Large'.PIP On/OffSetting PIP Signal SourceYou can display TV, VIDEO or SVIDEO for PIP signal source.Move to 'PIP'Move to 'PIP'Move to 'PIP'Move to 'PIP ON/OFF'Move to 'PIP SOURCE'Use to select 'On' and then press SELECT button.Move to 'Sound'Move to 'BASS'Optional FunctionsPicture In Picture (PIP) function is not applied to some models.
Move to 'PIP V-POS'2120AdjustColorSetupSoundPICTRUE IN PICTUREPIP ON/OFFPIP SOURCEPIP SIZEPIP H-POSPIP V-POSPIP SOUNDPIP IMAGEPIP1580ONOFFTVAdjusting PIP SoundAdjustColorSetupSoundPICTRUE IN PICTUREPIP ON/OFFPIP SOURCEPIP SIZEPIP H-POSPIP V-POSPIP SOUNDPIP IMAGEPIP1580ONOFFTVAdjustColorSetupSoundPICTRUE IN PICTUREPIP ON/OFFPIP SOURCEPIP SIZEPIP H-POSPIP V-POSPIP SOUNDPIP IMAGEPIP1580ONOFFTVUse to switch On/Off the PIP sound.Adjusting PIP Horizontal PositionAdjusting PIP Vertical PositionUse or to adjust PIP upward or downward.Use or to adjust PIP left or right. AdjustColorSetupSoundPICTRUE IN PICTUREPIP ON/OFF15PIP SOURCEPIP SIZEPIP H-POSPIP V-POSPIP SOUND80PIP IMAGEPIPONOFFTVAdjustColorSetupSoundPICTRUE IN PICTUREPIP ON/OFF15PIP SOURCEPIP SIZEPIP H-POSPIP V-POSPIP SOUND80PIP IMAGEPIPONOFFTVAdjusting PIP Contrast805005050AdjustColorSetupSoundPIP IMAGEPIPBRIGHTNESSCONTRASTSHARPNESSCOLOR TINTCOLOR TONE805005050AdjustColorSetupSoundPIP IMAGEPIPBRIGHTNESSCONTRASTSHARPNESSCOLOR TINTCOLOR TONEAdjusting PIP ImageAdjusting PIP BrightnessMove to 'BRIGHTNESS'Use or to adjust PIP Brightness.Use or to adjust PIP Contrast.Move to 'PIP IMAGE'Move to 'PIP IMAGE'Move to 'PIP H-POS'Move to 'PIP SOUND' Move to 'CONTRAST'Move to 'PIP IMAGE'Move to 'PIP' Move to 'PIP'Move to 'PIP'Move to 'PIP'Move to 'PIP'Move to 'PIP'
Move to 'CHANNEL'Move to 'CHANNEL'Move to 'FINE TUNE'Move to 'ADD / DEL SELECT'2322Adjusting PIP Color Tone805005050AdjustColorSetupSoundPIP IMAGEPIPBRIGHTNESSCONTRASTSHARPNESSCOLOR TINTCOLOR TONE805005050AdjustColorSetupSoundPIP IMAGEPIPBRIGHTNESSCONTRASTSHARPNESSCOLOR TINTCOLOR TONEUse or to adjust PIP Color Tone.(This will not affect the color quality of PC signal.)Adjusting PIP SharpnessAdjusting PIP Color TintUse or to adjust PIP Color Tint.(This will not affect the color quality of PC signal.)805005050AdjustColorSetupSoundPIP IMAGEPIPBRIGHTNESSCONTRASTSHARPNESSCOLOR TINTCOLOR TONEUse or to adjust PIP Sharpness.Fine Tuning50AdjustSetupSoundCHANNELCHANNELADD/DEL SELECTFLNE TUNEAUTO SERCH OFF1TYPE501AdjustSetupSoundCHANNELCHANNELADD/DEL SELECTFLNE TUNEAUTO SERCH OFFTYPEThis function is used when some channels are not tuned due to weak TV signal or a poor antenna receiver.Adjusting ChannelAdding / Deleting ChannelUse or to add/delete channel. AdjustSetupSoundCHANNELCHANNELADD/DEL SELECTFLNE TUNEAUTO SERCH OFF501TYPEMove to 'CHANNEL'Move to 'CHANNEL'Use or to select channel. Adjusting OSD While Using the TV & VideoWhen signal is weak or the channel is not used for broadcasting, it is available to add or delete the channel.Move to 'SHARPNESS'Move to 'PIP IMAGE'Move to 'COLOR TINT'Move to 'PIP IMAGE'Move to 'COLOR TONE'Move to 'PIP IMAGE'Move to 'PIP'Move to 'PIP'Move to 'PIP'
Move to 'AUTO SEARCH'Move to 'TYPE'2524501AdjustSetupSoundCHANNELCHANNELADD/DEL SELECTFLNE TUNEAUTO SERCH OFFTYPETypeAuto SearchUse to select Cable/Air.501AdjustSetupSoundCHANNELCHANNELADD/DEL SELECTFLNE TUNEAUTO SERCH OFFTYPEUse to select 'ON' button and then press SELECT button, and the channel is searched automatically and saved. Hot KeyPC ModeTV & Video Mode1) Hot key on the monitorInformation DisplayPress CH button on the monitor to display information(resolution, frequency and others).Auto AdjustmentPress AUTO/EXIT on the monitor front when OSD is not displayed to perform Auto Adjustment.2) Hot key on remote controllerInformation DisplayPress ENTER key on the remote controller to display information.Zoom function in PC mode (controlled with remote controller only)Press ZOOM button on the remote controller in PC mode to display gauge in the lower center of the monitor. Use and to adjust ZOOM size.Press ZOOM button again to adjust ZOOM location.Press ZOOM button again to exit ZOOM OSD.1) Hot Key on the monitorPress CH button in TV mode when OSD is not displayed, so that channel number can be changed.Press VOL button in TV or Video mode when OSD is not displayed, so that volume may increase or decrease.AUTO/EXIT button.2) Hot Key on remote controllerDisplaying information on TV modePress ENTER key on remote controller to display information (current channel information).Displaying information on Video modePress ENTER key on remote controller to display information (current video input information).Refer to 'OSD function for PC' for 'Adjustment', 'Setup' and 'Sound' during TV and video operation.Move to 'CHANNEL'Move to 'CHANNEL'
2726Installing VESA and USBInstalling VESA StandSupporter for VESAArrange the VESA stand on supporter and fix with four screws.Installing TUNER (Optional)Install TUNER in the designated location in the rear side of the stand. (Use dedicated TUNER from Hansol Electronics only.)Remote ControllerPIP function is optional.PIP function is applied to some models.WarningTo avoid exposition, replace the batteries correctly.Use the batteries designated by a manufacturer or equivalent.Dispose the batteries as the instruction of a manufacturer.ConversionButtonUsed to switch from PC, V1, V2 or TV.Mute ButtonZoom ButtonPower ButtonMenu ButtonUsed to adjust OSD.Also used to exit fromOSD menu.Channel ButtonUsed to change thechannel.PIP (Optional function)PIP OnPIP Size AdjustPIP OffUsed to adjustsize and locationof zoom screen.
29281.ANALOG Standard Signal Table"Out of range" displayed on the screen.This message is displayed when the signal from video card exceedsthe maximum frequency of the monitor. Readjust resolution and fre-quency in accordance with the monitor capacity. (Refer to StandardSignal Table)VGA (720 400)VGA (640 480)VGA (640 480)SVGA (800 600)XGA (1024 768)XGA (1024 768)SXGA (1280 1024)SXGA (1280 1024)MAC (640 480)MAC (832 624)MAC (1152 870)31.46931.46937.50046.87548.36360.02363.98179.97635.00049.72668.68170.08759.94075.00075.00060.00475.02960.02075.02566.66774.55175.06228.32225.17531.50049.50065.00078.750108.000135.00030.24057.284100.000Installing Option StandThe monitor is available for various VESA standard stands.Follow the following instruction for VESA stand.1. Place the monitor with its LCDpanel on the flat ground coveredwith cushion or soft cloth. 2. Unscrew six screws.3. Disassemble the stand. 4. Locate the option stand on thesupporter.5. Tighten four screws. 6. Stand the monitor and spread outthe stand bar.ResolutionHorizontal Frequency (KHz)Vertical Frequency(Hz)Clock Frequency(MHz)
VGA (720 400)VGA (640 480)VGA (640 480)SVGA (800 600)XGA (1024 768)XGA (1024 768)SXGA (1280 1024)MAC (640 480)MAC (832 624)MAC (1152 870)31.46931.46937.50046.87548.36360.02363.98135.00049.72668.68170.08759.94075.00075.00060.00475.02960.02066.66774.55175.06228.32225.17531.50049.50065.00078.750108.00030.24057.284100.000ResolutionHorizontal Frequency (KHz)Vertical Frequency(Hz)Clock Frequency(MHz)2. DVI Standard Signal Table"Out of range" displayed on the screen.This message is displayed when the signal from video card exceedsthe maximum frequency of the monitor. Readjust resolution and fre-quency in accordance with the monitor capacity. (Refer to StandardSignal Table)
3130TroubleshootingCheck the power connection. (Refer to page 4)Power LED is off.No picture.Check the signal cable between monitor and computer. (Refer to page 4)Perform AUTO ADJUSTMENT.Check the computer connection cable. (Refer to page 4)Check if computer power is on.Message, "CABLEDISCONNETED."is displayed on thescreen.Screen looks to be rundown.Perform FREQUENCY ADJUSTMENT and Adjust PHASE.Switch off/on the monitor.Remove accessories (Video extension cable and others) and switch on.Screen is not clear.Check the resolution and frequency of computer and video card, and set up the again in reference to the current monitor mode and standard signal mode table.Display is unstable andtrembling.Type Amorphous active matrix super TFT LCDScreen Size 17" (Diagonal)Maximum ResolutionA nalog : 1280 X 1024@75 Hz , DVI: 1280 * 1024@60HzPixel Range0.264 mm X 0.264 mmMaximum Colors 16.7 MContrast Rate 200 : 1Visual Angle 80° / 80° / 80° / 80° (Left / Right / Up / Down)Response Speed 60 msBrightness 200 cd/m2Horizontal Frequency 80 kHz (Max.)Vertical Frequency75 Hz (Min.)Video Signal Analog RGB (0.714 Vpp)Synchronous Signal Mode H, V Separate TTL Sync, SOG, COMPOSITEMaximum 47 WPower Saving Mode Under 5 WFront Part MUTE, SELECT, AUTO/EXIT, MENU,CH, VOL SWITCHInput: 85/265V (50~60 Hz), Output: 12V, 4.5A, 54WTV NTSCAudio 3 Watt Speaker X 2 (Max.)Video CVBS, S-VHSWall Mount VESA StandardSafety Standard UL, CE, CB, TUVEMI FCC-BLow Radiation MPR-IISize and Weight 435 X 448 X 197 / 6.0 KgSpecificationLCDPanelSynchronizationModel(B17BF)VideoInputPower ConsumptionControl keyMulti-MediaSafetyStandard& EMIDimensionPower AdapterAdjust COLOR at User Mode in OSD Color Menu.Color is irregular.
Check the resolution and frequency of computer and video card, and set up again in reference to the current monitor mode and standard signal mode table.Double images or'ghosts'.3332WarningTo prevent damage or loss, please read this warning carefully.When connecting/disconnecting the plug, pull out the plug itself, and never pull the plug to prevent fire caused by short.To prevent electric shock, do notconnect/disconnect the plug with wet hand.To prevent fire, do not connect a large number ofequipment in a single line.To prevent fire and electric shock, pull out the plugin case of thunder and lightening.To prevent fire and electric shock, do not try to takethe monitor apart or repair it yourself. Contact yourlocal service station or customer service center forinspection, modification or repair.AUTO / EXIT VOLAUTO / EXIT VOLAUTO / EXIT VOLIf you see smoke or smell something burning, stopusing the unit, switch off the power, pull out the plug,and then contact your local service station.Perform OSD ADJUSTMENT. Perform AUTO ADJUSTMENT.Adjust COLOR at User Mode in OSD Color Menu.Picture is dark.Picture is biased or cutor too wide.Check the voice signal connection code or adjust volume.No sound.Adjust BASS and TREBLE.Dead sound.Check if the selected channel mode is in accordance with the channel mode of the area.Select AUTO SEARCH to set up the channel automatically.TV signal is notreceived.Monitor is in power saving mode.Power LED turns intoamber or blinkingamber.

Navigation menu