Hanwha Techwin DIGIMAXL55W Digital Camera User Manual L55W en c V04

Download:
Mirror Download [FCC.gov]
Document ID	585774
Application ID	TkeVlYOASz7aGW7WBzE3Qw==
Document Description	Users Manual 3 of 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	227.1kB (2838702 bits)
Date Submitted	2005-09-26 00:00:00
Date Available	2005-09-26 00:00:00
Creation Date	2005-09-22 16:40:28
Producing Software	Acrobat Distiller 5.00 for Macintosh
Document Lastmod	2005-09-22 16:40:41
Document Title	L55W_en_c_V04
Document Creator	QuarkXPress(MAC): LaserWriter 8 8.3fc2
Document Author:	samyoung

Setting up the application software
ſ The QuickTime program folder will appear. 13. The QuickTime Settings – Introduction
window appears. Click [Next >].
Click on the Close button to close the folder.
[Click !]
[Click !]
14. Set the transfer rate for downloading
content from the Internet, and then click
[Next >].
[Click !]
16. Specify the file types you want to
associate with QuickTime. Click [Finish].
[Click !]
15. Set up your browser for QuickTime plug-in.
Click [Next >].
[Click !]
17. Installation is complete. Click [Close].
[Click !]
ŝ121Ş
Setting up the application software
* The QuickTime Player will launch, the readme file will open, and the Step 18 window will open.
Click on the Close 1 and Close 2 buttons to exit the program.
[Close 1 button]
[Close 2 button]
18. A window where you can choose the program you
want to install will appear. Click [Install].
For information on application software, please refer
to page 117.
[Click !]
INFORMATION
ƃ If you select [Exit] at step 18, the application program installation will be cancelled.
19. The Digimax Master installation window will be
displayed as shown alongside.
Click the [Next >] button.
[Click !]
ŝ122Ş
Setting up the application software
20. A window will open. Click the [Next >] button.
[Click !]
INFORMATION
ƃ If you select [Cancel] at step 20, a window for installing Digimax Reader will be displayed.
21. A destination selection window will open.
Click [Next >].
To copy the files to another folder, click [Browse..] and
choose a folder you want.
[Click !]
22. A window will open, asking you to choose a folder to
which program icons will be added.
Click [Next >] button. If you want to choose another
folder, click [Browse..] and choose a folder you want.
[Click !]
23. Click [Install] button and Digimax Master starts installing.
[Click !]
ŝ123Ş
Setting up the application software
24. Digimax Master installation is successfully
completed.
Click the [Finish] button to install Digimax Reader.
* The screen shot of step 24 can be different from
the illustration depending on the system
requirements.
[Click !]
25. A window will be displayed as shown alongside.
Click the [INSTALL] button.
- If you click the [MANUAL] button instructions,
instructions for using Digimax reader will be
displayed.
- Click the [EXIT] button and the Digimax reader
installation will be cancelled and a window for
restarting the computer will appear.
[Click !]
26. A window will open. Click the [Next >] button.
[Click !]
27. The Software License Agreement window will be
displayed. If you agree to this, click [Yes],
the window will then move to the next step.
If you disagree, click [No] and the installation
program will be cancelled.
[Click !]
ŝ124Ş
Setting up the application software
28. A destination selection window will open.
Click the [Next >] button.
To copy the files to another folder, click
[Browse...] and choose a folder you want.
[Click !]
29. Digimax Reader Installation is completed.
The system will not reboot even if the [Yes, I
want to restart the computer now] option is
selected.
[Click !]
30. To apply changes, you must restart the computer.
Select [Yes, I want to restart my computer now], and
then click the [OK] button.
[Click !]
31. After restarting the computer, connect the PC to the camera with the USB cable.
32. Turn the camera power on.
The [Found New Hardware Wizard] will open and
the computer will recognise the camera.
* If your OS is Windows XP, an image viewer
program will open.
If the download window of Digmax Master opens
after starting Digimax Master, the camera driver was
setup successfully.
ŝ125Ş
Setting up the application software
33. If you can see [Removable Disk] under [My computer],
the camera driver installation was successful.
Now you can transfer image files from the camera to
PC via the USB cable.
INFORMATION
ƃ If you have installed the camera driver, The [Found New Hardware Wizard] may not open.
ƃ On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify "USB
Driver" in the CD supplied. (for Windows 98 and 98 SE).
ƃ Before connecting the camera to the PC, You should first install the camera driver.
ƃ After installing the camera driver, you have to restart your PC.
ƃ If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.
Install the camera driver and connect the camera to the PC again.
ƃ Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.130), and re-install the driver.
2. Refer to FAQ (p.142) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
ŝ126Ş
Starting PC mode
Ү If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to "computer connection mode".
Ү In this mode, you can download stored images to your PC through the USB cable.
Ү The LCD monitor is always turned off in PC mode.
Ү The camera status lamp will blink when the files are transferring via the USB connection.
ƈ Connecting the camera to a PC
1. In any mode with the exception of Voice Recording
mode, press the Menu button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[COMPUTER], and then press the OK button.
SETUP
DATE&TIME
COMPUTER
IMPRINT
PRINTER
AF LAMP
SOUND
USB
BACK:
SET:OK
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
ſ If you selected [PRINTER] in Step 4, when you connect the camera to your printer, the
[CONNECTING PRINTER] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
ŝ127Ş
Starting PC mode
ƈ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable Disk
ƍ DCIM ƍ 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right mouse button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
ŝ128Ş
Starting PC mode
6. Press the right mouse button and a pop-up menu
will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Master], you can see the stored images in the memory directly on the
PC monitor and you can copy or move the image files.
ŝ129Ş
Removing the USB Driver for Windows 98SE
ƈ To remove the USB driver, refer to the process shown below.
1. Click [Start ƍ Settings] and click [Control Panel].
2. Double-click [System].
3. Select [Device manager ƍ Hard Disk Controller ƍ
Samsung DSC] and click the [Remove] button.
[Click !]
4. Click the [OK] button.
The camera is removed from the system.
ŝ130Ş
Removing the USB Driver for Windows 98SE
5. Click [Start ƍ Settings ƍ Control Panel] and double
click [Add/Remove programs].
6. The [Add/Remove Programs Properties] window
will open. Click [Digimax L55W] and click the
[Add/Remove] button.
[Click !]
7. Uninstallation is complete. Click the [Finish]
button and the window will disappear.
[Click !]
ŝ131Ş
Removable Disk
ƈ To use this camera as a Removable Disk, install (p.118) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM ƍ 100SSCAM) can be transferred to the PC.
INFORMATION
Important information whilst using the Removable Disk
ƃ The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
ƃ We recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
ƃ When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory.
ƃ When you upload a file that is not taken by this camera to the Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and nothing
is displayed in THUMBNAIL mode.
ƃ The camera status lamp will blink, when a file is
transferred (copy or deletion) between the PC and
the camera. Do not remove the USB cable until the
lamp stops blinking.
To remove the USB cable in Windows 2000/ME/XP,
use the [Unplug or Eject Hardware] icon on the task
bar.
ŝ132Ş
Removing the removable disk
ƈ Windows 98 / 98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, you have to wait until the lamp illuminates.
2. Unplug the USB cable.
ƈ Windows 2000 / ME / XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, you have to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
[Click !]
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage Device]
and click the [OK] button.
[Click !]
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
[Click !]
ŝ133Ş
Removing the removable disk
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk
will be removed safely.
7. Unplug the USB cable.
[Click !]
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the
camera driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up.
This camera is compatible with MAC OS 10.0 or later.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
CAUTION
ƃ For Mac OS 10.0 or later : First complete uploading from computer to camera and then
remove the removable disk with the Extract command.
ŝ134Ş
Digimax Master
ƈ You can download, view, edit and save your images and movies with this software. This
software is only compatible with Windows except for the Windows 98.
ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master].
ƃ Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display after
connecting the camera and your PC.
- To download the captured images, select the
[Select All(A)] button.
- Select desired folder in the window and click the
[Select All(A)] button. You can save captured
images and selected folder.
- If you click the [Cancel] button, downloading will be
cancelled.
[Click !]
3. Click [Next(N) >] button.
[Click !]
ŝ135Ş
Digimax Master
4. Select a destination and make a folder to save
downloaded images and folders.
- Folder names can be made in order of date and
images will be downloaded.
- Folder name will be made as you want and images
will be downloaded.
- After selecting a folder that was made before,
images will be downloaded.
5. Click [Next(N) >] button.
[Click !]
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the images.
[Click !]
7. Downloaded images will be displayed.
ŝ136Ş
Digimax Master
ƃ Image viewer : You can view the stored images.
‫ڹ‬
‫ڽ‬
‫ھ‬
‫ڿ‬
‫ں‬
‫ڻ‬
‫ڼ‬
- Image viewer functions are listed below.
‫ ڹ‬Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
‫ ں‬Image selection window : You can select the desired images in this window.
‫ ڻ‬Media type selection menu : You can select image viewer, image edit and movie edit
functions in this menu.
‫ ڼ‬Preview window : You can preview a image or a movie clip and check the multi media
information.
‫ ڽ‬Zoom bar : You can change preview size.
‫ ھ‬Folder display window : You can see the folder location of the selected image.
‫ ڿ‬Image display window : Images of the selected folder are displayed.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ137Ş
Digimax Master
ƃ Image edit : You can edit the still image.
‫ڹ‬
‫ڼ‬
‫ں‬
‫ڻ‬
- Image edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Tools]
: You can resize or crop the selected image. See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the [Help] menu.
‫ ں‬Drawing tools : Tools for editing an image.
‫ ڻ‬Image display window : a selected image displays in this window.
‫ ڼ‬Preview window : You can preview the changed image.
ſ A still image edited with Digimax Master can’t be played back on the camera.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ138Ş
Digimax Master
ƃ Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip.
‫ڹ‬
‫ں‬
- Movie clip edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
You can insert multi media in this window. You can select AVI, Windows
media (wmv), Windows media (asf) and movie clip for this camera (AVI,
MPEG-4) file types.
‫ ں‬Frame display window : You can insert multi media in this window.
ſ Some movie clips that was compressed with a codec that is not compatible with the Digimax
Master can’t play back in the Digimax Master.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ139Ş
Digimax Reader
ƈ Digimax Reader is a Text recognition program. You can save an image file that is captured in
the Text mode, as a text file with this program.
This software is only compatible with Windows.
ƈ To start the program, click [Start ƍ Programs ƍ Digimax Reader Eng].
The following screen will appear.
ƈ How to use the Digimax Reader
1. Connect the camera and the PC with a USB cable and download the images that were
stored in the camera to the PC.
* Please see page 127~129 for details on Connecting a camera and PC, Downloading
images.
2. Run the Digimax Reader.
3. Click the Open (
ŝ140Ş
) icon as shown alongside.
Digimax Reader
4. Select the image you want to save as a text file.
* Only an image that was taken with a SAMSUNG
camera can be opened.
5. Click the Area Analysis (
) icon to scan the image.
6. Part of the image you selected will be displayed as
shown.
7. Click the Character Recognition (
) icon.
The part selected in the previous step will be
recognized as text.
8. To save the section as a text, click the Save (
icon. A window as shown alongside will be displayed.
ŝ141Ş
Digimax Reader
9. Select the file type that you want.
Selectable file types : *.TXT, *.HWP, *.DOC, *.RTF
INFORMATION
ƃ To get an image that can be recognized as a text :
- Keep a distance that you can capture the image clearly between the subject and the camera.
- The subject need to be centered.
- Avoid camera shake to get a good image.
ƃ Refer to the [Help] menu in Digimax Reader for further information.
FAQ
ƈ Please check the following if the USB connection malfunctions.
[Case 1]
The camera power is off.
ƍ Turn the camera power on.
[Case 2]
USB Driver is not installed correctly.
ƍ Install the USB Driver correctly. Refer to page 118.
[Case 3]
The USB cable is not connected or you are using a cable with an incorrect
specification.
ƍ Use a USB cable with the correct specification.
[Case 4]
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
ƍ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and
then turn on the camera.
ŝ142Ş
FAQ
Case 5]
There is an unexpected error during file transfer
ƍ Turn the camera power off and on again. Transfer the file again.
[Case 6]
How do I know my computer supports a USB Interface?
ƍ Check the USB port in your computer or keyboard.
ƍ Check the OS version. A USB Interface is available in Windows 98, 98SE,
2000, ME, XP.
ƍ Check [Universal Serial Bus controllers] in Device Manager. Do the following to
checks [Universal Serial Bus controllers].
Win 98/ME
: Follow [Start ƍ Settings ƍ Control Panel ƍ System ƍ
Device Manager ƍ Universal Serial Bus controllers].
Win 2000
: Follow [Start ƍ Settings ƍ Control Panel ƍ System ƍ
Hardware ƍ Device Manager ƍ Universal Serial Bus
controllers].
Win XP
: Follow [Start ƍ Control Panel ƍ Performance and
Maintenance ƍ System ƍ Hardware ƍ Device Manager
ƍ Universal Serial Bus controllers].
There must be USB Host Controller and USB root hub under [Universal Serial
Bus controllers].
In addition, double-click on the USB Universal Host Controller and the USB
Root Hub to check if the Device Status states "This device is working properly".
If the Device Status says the device is "not working properly", click the "Driver"
tab and then click [Update Driver] or [Reinstall Driver].
ƍ When all the conditions mentioned above are met, the computer can support
the USB interface.
[Case 7]
When using the USB hub.
ƍ There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible. Wherever possible, connect the
camera to the PC directly.
[Case 8]
Are other USB cables connected to the PC?
ƍ The camera may malfunction when it is connected to the PC at the same time
as another USB cable. In this case, disconnect the other USB cable, and
connect only one USB cable to the camera.
ŝ143Ş
FAQ
[Case 9]
When I open the Device Manager (by clicking Start ƍ (Settings) ƍ Control
Panel ƍ (Performance and Maintenance) ƍ System ƍ (Hardware) ƍ Device
Manager), there areèUnknown DeviceséorèOther Deviceséentries with a
yellow question mark (?) beside them or devices with an exclamation mark (!)
beside them.
ƍ Right-click on the entry with the question (?) or exclamation (!) mark and select
"Remove". Restart the PC and connect the camera the again. For Windows 98
PC, remove the camera driver also, restart the PC, and then reinstall the
camera driver.
ƍ Double-click on the entry with the question (?) or exclamation (!) mark, click the
"Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears
asking you to specify the location of the appropriate device driver, specify "USB
Driver" in the CD supplied.
[Case 10]
In some security programs (Norton Anti Virus, V3, etc.), the computer may not
recognise the camera as a removable disk.
ƍ Stop the security programs and connect the camera to the computer. Refer to
the security program instructions about how to stop the program.
ƈ When the movie clip doesn’t play back on the PC
ſ When the movie clip recorded by the camera doesn’t play back on the PC, the causes are
mostly due to the codec installed on the PC.
ƃ When the DirectX 9.0 or later is not installed
ƍ Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select [CD-ROM drive:\USB Driver\DirectX 9.0] folder and
click the DXSETUP.exe file.The DirectX will be installed. Visit the following site for
downloading the DirectX.http://www.microsoft.com/directx
ŝ144Ş
FAQ
ƈ If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly
ƍ If a PC (Windows 98) is turned on for a long time and the camera is connected repeatedly
the PC may not recognise the camera. In this case, re-start the PC.
ƈ If a PC connected with the camera stops responding while Windows is starting.
ƍ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to disable and re-start
the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don’t have Legacy USB
Support) If you can’t change the menu by yourself, contact to the PC manufacturer or
BIOS manufacturer.
ƈ If the movie clip can’t be deleted, removable disk can’t be extracted or an error message
displays during the file transfer.
ƍ If you install only the Digimax Master, the problems mentioned above occasionally
happen.
- Close the Digimax Master, program by clicking the Digimax Viewer icon on the Taskbar.
- Install all the application programs included in the software CD.
ŝ145Ş
MEMO
ŝ146Ş
MEMO
ŝ147Ş
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
www.samsungcamera.com
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
www.samsungcamerausa.com
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : 49 (0) 6196 66 53 03
FAX : 49 (0) 6196 66 53 66
www.samsungcameras.de
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2200
FAX : (33) 1-4538-6858
www.samsungphoto.fr
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-4599
FAX : (86) 22-2769-7558
www.samsungcamera.com.cn
ҧ Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-2930

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:09:22 16:40:41+09:00
Create Date                     : 2005:09:22 16:40:28+09:00
Title                           : L55W_en_c_V04
Author                          : samyoung
Creator                         : QuarkXPress(MAC): LaserWriter 8 8.3fc2
Producer                        : Acrobat Distiller 5.00 for Macintosh
Page Count                      : 28
Mod Date                        : 2005:09:22 16:40:41+09:00
Creation Date                   : 2005:09:22 16:40:28+09:00
Metadata Date                   : 2005:09:22 16:40:41+09:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools