Hanwha Techwin DIGIMAXS500 Digital Camera User Manual S500 en c v04

Samsung Techwin Co Ltd Digital Camera S500 en c v04

Contents

Users Manual 2

ŝ40ŞDelete ( ) button Printer buttonƈIf you selectd [Computer] sub menu in the [USB]setup menu, [Connecting Computer] message willdisplay when you connect the camera to yourprinter and the conncection will not be established.In this case, press the Printer button. [ConnectingPrinter] message will display and the Easy printingmode will be selected. * In some instances the camera may not connect to the printer, this will depend onthe make of the printer.- After the connection, the Easy printing menuwill display on the LCD monitor. To display the PictBridge menu, press theMenu button. For more information about thePictBridge menu, refer to page 49. ƈThis deletes images stored on the memory.ƃDeleting Images in Play Mode1. Select an image that you want to delete bypressing the LEFT / RIGHT button and press theDELETE( ) button.2. A message will display as shown alongside on the LCD monitor.3. Select the submenu values by pressing the LEFT / RIGHT button and then press the OK button.If [Yes] is selected : deletes the selected images.If [No] is selected : cancels "Delete Image".ƃBefore deleting images from the camera, you should protect or downloadimages to your computer that you wish to keep.INFORMATION ƃDeleting Images in Thumbnail Display Mode1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you wantto delete, and then press the DELETE ( ) button.2. The following message will be displayed on the LCD monitor.3. Select the submenu values by pressing the LEFT / RIGHT button and thenpress the OK button.If [Yes] is selected : deletes the selected images.If [No] is selected : cancels "Delete Image".Delete?Yes NoConfirm:OKDelete?Yes NoConfirm:OKPress the delete button.IMAGESOne PicAll PicsExit:MENU Move: 
ŝ41ŞƈPLAY mode functions can be changed by using the LCD monitor. In the PLAYmode, pressing the MENU button displays the menu on the LCD monitor. Themenus you can set up in Play mode are as follows. To capture an image aftersetting up the play menu, press the PLAY mode button or shutter button.Menu tab Main menu Sub menu Secondary menu PageShow Play / Repeat PlayInterval 1, 3, 5, 10 secOFFSelectAll PicsSelect -All Pics -2272 X 1704 -2048 X 1536 -1600 X 1200 -1024 X 768 -640 X 480 -User Image 1, 2 -SLIDEPROTECTDELETERESIZEp.43~44p.44p.45p.45EffectUnlock / LockLeft / Right / Menu / OK buttonSetting up the play back function using the LCD monitorƈLEFT / RIGHT/ MENU/ OK buttons activate the following.- LEFT button : While the menu is showing, press the LEFT button to selectthe menu tab to the left of the cursor. While the menu is notshowing, press the LEFT button to select the previousimage. - RIGHT button : While the menu is showing, press the RIGHT button to selectthe menu tab to the right of the cursor, or to move ansecondary menu. While the menu is not showing, press theRIGHT button to select the next image. - MENU button : When you press the MENU button, the play mode menu willbe displayed on the LCD monitor. Pressing it again will returnthe LCD to the initial display.- OK button : When the menu is displayed on the LCD monitor, the OKbutton is used for confirming data that is changed by usingthe 5 function button.
ŝ42ŞSetting up the play back function using the LCD monitorMenu tab Main menu Sub menu Secondary menu PageOne Pic -All Pics -No -Yes -AutoPostcardCard4X6L2LLetterA4A3AutoFull1248916IndexIMAGESAUTO SETCUSTOMSETSizep.50p.50p.51ƈThis menu is available while the camera is connected to a PictBridge supportingprinter (direct connection to the camera, sold separately) with a USB cable.LayoutMenu tab Main menu Sub menu Secondary menu PageRight 90º -Left 90º -180º -Horizontal -Vertical -StandardSelect / All Pics / CancelDPOF Index No / Yes p.46SizeSelect / All Pics / CancelNo -Yes -Full -Basic -OSD Off -p.49p.48p.46ROTATECOPY TO CARDOSDINFORMATION
ŝ43ŞƃStart the slide show : The slide show can start only in the [Show] menu.1. Use the Up / Down buttons to select the [Show]menu and press the Right button. 2. Select a desired sub menu by pressing the Up /Down button. [Play] : The slide show is closed after onecycle. [Repeat Play] : The slide show is repeated untilcancelled. 3. Press the OK button to save the configuration. ƃSetting play interval: Set the slide show play interval.1. Select the [Interval] sub menu by pressing the UP /DOWN button and press the RIGHT button.2. Use the Up / Down buttons to select the desiredinterval.3. Press the OK button to save the configuration.ƃThe loading time depends on the image size and quality.ƃWhile the slide show is playing, only the first frame of a MOVIE file isdisplayed.ƃWhile the slide show is playing, the voice recording file will not display. INFORMATIONƈImages can be displayed continuously at pre-set intervals.You can view the slide show by connecting the camera to an external monitor.1. Press the play mode button and press the menu button.2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab.Setting up the play back function using the LCD monitorStarting the slide showSLIDEShowIntervalEffectBack:Set:OKPlayRepeat PlaySLIDEShowIntervalEffectBack:Set:OK1 sec3 sec5 sec10 secMenu tab Main menu Sub menu Secondary menu PageAutoPlainPhotoFastphotoAutoDraftNormalFineAuto Date OffOnAuto File name OffOnStandard -Index - No -Yes -No -Yes -Typep.51ſMenus are subject to change without prior notice.QualityCUSTOMSETp.51p.52p.52PRINTDPOF PRINTRESET
ŝ44ŞStarting the slide show Protecting imagesƈThis is used to protect specific shots from being accidentally erased (Lock).It also unprotects images that have been previously protected (Unlock).ƃProtecting Images1. Press the play mode button and press the menubutton.2. Press the LEFT / RIGHT button and select the[PROTECT] menu tab.3. Select a desired sub menu by pressing the UP /DOWN button and press the OK button.[Select ] : Selection window for an image to beprotected/released is displayed.- Up / Down / Left / Right : Select an image- Zoom W / T Button : Protect / release the image- OK button : Your changes will be savedand the menu willdisappear.[All Pics] : Protect / release all saved images- Zoom W / T Button : Protect / release the images- OK button : Your changes will be savedand the menu will disappear.- If you protect an image, the protect icon will bedisplayed on the LCD monitor. (An unprotectedimage has no indicator)- An image in LOCK mode will be protected fromthe delete function or [Delete] functions, but willNOT be protected from the [Format] function.PROTECTSelect All PicsExit:MENU Move: Set:OKWUnlock TSet:OKWUnlock TƃConfigure slide show effects : Unique screen effects can be used for the slideshow.1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button.2. Use the Up / Down button to select the type ofeffect.: Normal display.: Image is displayed slowly.: Image is displayed slowly from the centreoutwards.: Image moves from the top left.: The image slides diagonally from top left tobottom right. : The image slides irregularly.3. Press the OK button to confirm the setting.SLIDEShowIntervalEffectBack:Set:OKOFF
ŝ45ŞƈChange the resolution (size) of pictures taken. Select the [User Image] to savean image to be the start-up image. The resized image will have a new file name.1. Press the play mode button and press the menubutton.2. Press the LEFT / RIGHT button and select the[RESIZE] menu tab.3. Select a desired sub menu by pressing the UP /DOWN button and press the OK button.ƃA large sized image can be resized to a smaller sized image, but not vice versa.ƃOnly JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) filescan’t be resized. ƃYou can change the resolution of only those files compressed in the JPEG 4:2:2format.ƃThe resized image will have a new file name. The [User Image] image is storednot on the memory card but on the internal memory.ƃOnly two [User Image] images can be saved. ƃIf the memory capacity is insufficient to store the resized image, a [Memory Full!]message will display on the LCD monitor and the resized image will not bestored.ƃImage Resize Types5M O O O O O O4M X O O O O O3M X X O O O O2M X X X O O O1M X X X X O OVGA X X X X X OResize2272 X17042048 X15361600 X12001024 X768640 X 480UserImageDeleting images ResizeRESIZEExit:MENU Move: 2272X17042048X15361600X12001024X768640X480ƈOf all the files stored in the memory card, the unprotected files in the DCIMsubfolder will be deleted. Remember that this will permanently deleteunprotected images. Important shots should be stored on a computer beforedeletion takes place. The startup image is stored in the camera's internalmemory (i.e., not on the memory card) and it will not be deleted even if youdelete all files on the memory card.ƃDeleting images1. Press the play mode button and press the menubutton.2. Press the LEFT / RIGHT button and select the[Delete] menu tab.3. Select a desired sub menu by pressing the UP /DOWN button and press the OK button.[Select] : Selection window for an image to deleteis displayed.- Up / Down / Left / Right : Select an image- Zoom T Button : Select the image for deletion.( mark)- OK Button : Press the OK Button to displaythe confirmation message.Select the [Yes] menu and pressthe OK button to deletemarked images. [All Pics] : Displays confirmation window. Select the[Yes] menu and press the OK button todelete all unprotected images. If there aren’t protected images, allthe images are deleted and a [No Image!] message will display. 4. After deletion, the screen will be changed to the play mode screen.DELETESelect All PicsExit:MENU Move: Del:OKSelect:TDel:OKDelete?Yes NoConfirm:OK
ŝ46ŞRotating an image DPOFƈYou can rotate the stored images by various degrees. Once the playback of therotated picture is finished, it will switch back to the original state.1. Press the play mode button and press the menubutton.2. Press the LEFT / RIGHT button and select the[ROTATE] menu tab.3. Select a desired sub menu by pressing the UP /DOWN button.[Right 90˚] : Rotate picture in a clock-wise direction[Left 90˚] : Rotate picture in a counter-clock-wise direction[Horizontal] : Rotate picture horizontally[Vertical] : Rotate picture vertically [180˚] : Rotate picture 180degrees4. Press the OK button and the rotated image will be displayed. If you display the rotated image on the LCD monitor, empty spaces mayappear to the left and right of the image.ƈDPOF(Digital Print Order Format) allows you to embed printing information onyour memory card’s MISC folder. Select the pictures to be printed and howmany prints to make.ƈThe DPOF indicator will display on the LCD monitor when an image that hasDPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs.ƈThis function is not available for Movie clips and Voice recording files.ƈWhen this menu is selected without inserting a memory card, you can selectthe[DPOF] menu but yhe menu can't be run.ROTATEExit:MENU Move: Right 90Left 90180HorizontalVertical
ŝ47ŞDPOF : Standard DPOF : IndexƈThis function allows you to embed print quantity information on a stored image.1. Press the play mode button and press the menubutton.2. Press the LEFT / RIGHT button and select the[DPOF] menu tab.3. Select the [Standard] menu by pressing the UP /DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP /DOWN button and press the OK button.[Select] : Selection window for an image to print isdisplayed.- Up / Down / Left / Right : Select an image to print.- Zoom W / T Button : Select the number of prints.[All Pics] : Configure number of prints for allpictures except movie and voice files.- W / T button : Select a number of prints[Cancel] : Cancel the print setup.5. Press the OK button to confirm the setting.If an image carries DPOF instructions, the DPOFindicator ( ) will show.ƈImages (except for movie clips and voice file) are printed as index type.1. Press the play mode button and press the menubutton.2. Press the LEFT / RIGHT button and select the[DPOF] menu tab.3. Select the [Index] menu by pressing the UP /DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP /DOWN button.If [No] is selected : Cancel the index print setting.If [Yes] is selected : The image will be printed in index format.5. Press the OK button to confirm the setting.DPOFStandardIndexSizeBack:Set:OKSelectAll PicsCancelSet:OKW00Print TDPOFStandardIndexSizeBack:Set:OKNoYesSet:OK?8:16<<
ŝ48ŞDPOF : Print size Copy To CardƈThis enables you to copy image files, movie clips and voice recording files to thememory card.ƃCopying to the Memory Card1. Press the play mode button and press the menubutton.2. Select the [COPY TO CARD] menu tab bypressing the LEFT / RIGHT button.3. Select a desired sub menu by pressing the UP /DOWN button and press the OK button.- [No] : Cancels "Copy to Card".- [Yes] : All images, movie clips and voice recording files saved in the internalmemory are copied to the memory card after the [Processing!]message is displayed. After copying has been completed, thescreen will return to play mode.ƃWhen this menu is selected without inserting a memory card, you can selectthe [COPY TO CARD] menu but the menu can’t be run.ƃIf there is not enough space available in the memory card to copy savedimages in the internal memory (20MB), the [COPY TO CARD] commandwill copy only some of the images and display [Card Full!] message. Thenthe system will return to the playback mode. Please be sure to delete anyunnecessary files to free up space before inserting the memory card into thecamera.ƃWhen you move the images that are stored in the internal memory by doing[COPY TO CARD] to the card, the next number of file names will be createdin the card to avoid duplication of the file name. - When the [Reset] of the [File] setup menu was set : The copied file namesstart from after the last stored file name. - When the [Series] of the [File] setup menu was set : The copied file namesstart from after the last captured file name. After completing [COPY TOCARD], the last stored image of the last copied folder is displayed on theLCD monitor.INFORMATIONCOPY TO CARDExit:MENU Move: NoYesƈYou can specify the print size when printing images stored on the memory card.The [Size] menu is available only for DPOF 1.1 compatible printers.ſDPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10ƃSetting the Print Size1. Press the play mode button and press the menubutton.2. Press the LEFT / RIGHT button and select the[DPOF] menu tab.3. Select the [Size] menu by pressing the UP /DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP /DOWN button and press the OK button.[Select] : Selection window for an image to bechanged printed size is displayed.- Up / Down / Left / Right : Select an image.- Zoom W / T Button : Change the print size.- OK button : Your changes will be savedand the menu willdisappear.[All Pics] : Change print size of all saved images.- W / T button : Select a print size- OK button : Confirm the changed setting.[Cancel] : Cancel all of the print size settings.ƃDepending on the manufacturer and print model, canceling the printing maytake a little longer for the printer to process.INFORMATION Set:OKWCancel TDPOFStandardIndexSizeBack:Set:OKSelectAll PicsCancelSet:OKWCancel T
ŝ49ŞOn Screen Display information PictBridgeƈYou can use the USB cable to connect this camera to a printer that supportsPictBridge (sold separately) and print the stored images directly. Movie clips andvoice files cannot be printed.ƃSetting up the camera for connection with the printer1. In any mode with the exception of Voice Recordingmode, press the MENU button.2. Press the LEFT / RIGHT button and select[SETUP] menu tab.3. Select [USB] menu by pressing the UP / DOWNbutton and press the RIGHT button.4. Select [Printer] menu by pressing the UP / DOWNbutton and press the OK button.SETUPFormatDate&TimeImprintSoundUSB Back:Set:OKComputerPrinter[Using the USB cable with Cradle][Using the USB cable with Camera]ƈYou can check shooting information about the displayed image.ƃHow to select the type of information you want to see1. Press the play mode button and press the menubutton.2. Select the [OSD INFORMATION] menu tab bypressing the LEFT / RIGHT button.3. Select a desired sub menu by pressing the UP /DOWN button and press the OK button.OSD INFORMATIONExit:MENU Move: FullBasicOSD OffƈConnecting the Camera to a PrinterƃUsing the USB cable with Cradle (Optional) : Connect the camera and the cradle. Connect the cradle to a printer’s USBport with the supplied USB cable. ƃUsing the USB cable with Camera : Connect the camera to a printer’s USB port with the supplied USB cable.[Full] [Basic][OSD Off]ISO : 50Av : F 2.8Tv : 1/30Flash : On1024ŦŦ7682005/12/01Presssing the playmodebutton for over 1sec.Presssing the playmodebutton for over 1sec.
ŝ50ŞPictBridge : Picture SelectionPictBridge : Print SettingExit:Shutter Set:OKƃSetting the Number of Copies to Print- Select [One Pic] or [All Pics]. A screen where you can set the number of copiesto print will appear as shown below.PREVNEXT0Exit:Shutter Set:OK0AUTO SETNoYesExit:MENU Move: ƈAUTO SET1. Use the LEFT and RIGHT buttons to select the [AUTO SET] menu tab.2. Use the UP and DOWN buttons to select thedesired submenu value, and then press the OKbutton.[No] : [CUSTOM SET] values are kept.[Yes] : All values in the [CUSTOM SET] areautomatically changed.ƈEasy printingWhen you connect the camera to printer in the Playback mode, you can print a picture easily. - Pressing the printer( ) button :Currently displayed image will be printed with theprinter’s default setting. - Pressing the Left / Right button : Selects a previous / next image.ƈSelect pictures to print1. Press the Menu button. 2. The [IMAGES] menu will appear.3. Use the UP and DOWN buttons to select thedesired submenu value, and then press the OKbutton.When [One Pic] is selected : The PictBridgefunction will beapplied only to the picture currently displayed.When [All Pics] is selected : The PictBridge function will be applied to allpictures, excluding movie clips and voice files.ſIf you selected [Computer] in Step 4, when you connect the camera to yourprinter, the [Connecting Computer] message will display and the connection willnot be established. In this case, disconnect the USB cable, and then follow theprocedure from Step 2 and onward. Or, press the Printer button and the camerais connected to the printer displaying the [Connecting Computer] message. But,the camera may not connect to the printer and turn off according to the printermanufacturer.IMAGESOne PicAll PicsExit:MENU Move: Print: Menu:OK[When [One Pic] is selected] [When [All Pics] is selected]- Press the Up / Down button to select the number of prints. - When [One Pic] is selected : Use the Left / Right button to select anotherpicture. After selecting another picture, select select the number of prints foranother picture.- After setting the number of prints, press the OK button to save.- Press the Shutter button to return to the menu without setting the number ofprints.
ŝ51ŞPictBridge : Print Setting PictBridge : PrintingƈPrinting Pictures1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.2. Use the UP and DOWN buttons to select the desired submenu value, andthen press the OK button.[Standard] : Print the pictures stored in thememory card in set numbers. One picture is printed on onepiece of paper.[Index] : Print multiple images on onesheet of paper.3. The screen shown on the right will appear and thepicture will be printed. If no picture is selected, the[No Image!] message will be displayed. Press theLEFT button while printing to cancel the printingand the [PRINT] menu is displayed.ſNumber of pictures in an index print variesdepends on the printer used.001 / 001PRINTStandardIndexExit:MENU Move: Cancel:Now PrintingƈCustom Set : You can select the Paper Size, Print Format, Paper Type, PrintQuality, Date Print, and File Name Print menus for printed pictures.1. Use the LEFT and RIGHT buttons to select the [CUSTOM SET] menu tab.2. Use the UP and DOWN buttons to select thedesired submenu value, and then press the RIGHTbutton.3. Use the UP and DOWN buttons to select thedesired submenu value, and then press the OKbutton. ſSome menu options are not supported in all manufacturer and printer models. If not supported, the menus are still displayed in the LCD, but are not selectable.ſIf the setting values are not changed in the automatic / manual setting, thesetting values are automatically kept.MenuSetting the size of the printingpaperSetting the number of pictures tobe printed on a sheet of paperSetting the quality of the printingpaperSetting the quality of the pictureto be printedSetting whether to print the dateSetting whether to print the filenameSizeLayoutTypeQualityDateFile NameAuto, PostCard, Card, 4x6, L, 2L,Letter, A4, A3Auto, Full, 1, 2, 4, 8, 9, 16, IndexAuto, Plain, Photo, FastPhotoAuto, Draft, Normal, FineAuto, Off, OnAuto, Off, OnFunction Sub menuCUSTOM SETSizeLayoutTypeQualityDateAutoAutoAutoAutoAutoExit:MENU Move: 
ŝ52ŞPictBridge : DPOF print Setup menuPictBridge : RESET1. Use the LEFT and RIGHT buttons to select the[RESET] menu tab.2. Use the UP and DOWN buttons to select thedesired submenu value, and then press the OKbutton.If [No] is selected : Settings will not be reset.If [Yes is selected : All print and image settingswill be reset.ſDefault print setting varies depending on the printer manufacturer.For your printer’s default setting, refer to the user’s guide that came with yourprinter.RESETNoYesExit:MENU Move: ƈDPOF Print : This allows you to directly print the files with DPOF information.ƈInitialises user-changed configurations.1. Use the LEFT and RIGHT buttons to select the [DPOF PRINT] menu tab.2. Use the UP and DOWN buttons to select thedesired submenu value, and then press the OK button.[No] : Cancel the printing[Yes] : Directly print the file with the DPOFinformationſDepending on the manufacturer and printer model, some menus may not beavailable. With a printer without supporting the DPOF, the menu is still displayed but notavailable.DPOF PRINTNoYesExit:MENU Move: Menu tab Main menu Sub menu Secondary menu PageSeries -Reset -Off, 1, 3, 5, 10 min - p.54No -Yes -05/12/01 13:00 -yy/mm/dd -dd/mm/yy -mm/dd/yy -Off -Off -Date -Date&Time -Off -Low -Medium -High -ENGLISH FRANÇAISDEUTSCH ESPAÑOL ITALIANOP”CCK»…PORTUGUÊSDUTCHDANSK SVENSKA SUOMIBAHASAPOLSKI Magyar--FilePower OffLanguageFormatDate&TimeImprintSoundp.53p.54p.55p.56p.55p.55ƈIn this mode, you can set up basic settings. You can use the setup menu in allcamera modes, except Voice Recording mode. The items indicated by are default settings.
ŝ53ŞSetup menuſMenus are subject to change without prior notice.Menu tab Main menu Sub menu Secondary menu PageComputer-Printer-Off-On-Dark-Normal-Bright-NTSC -PAL -Quick View Off / 0.5, 1, 3 sec - p.57No-Yes-Alkaline -Ni-MH -AF LampLCDVideo OutResetBattery typep.56p.56p.57p.58p.58USB p.56ƃAssigning File Names1. In any mode with the exception of Voice Recordingmode, press the MENU button.2. Press the LEFT / RIGHT button and select the[SETUP] menu tab.3. Select the [File ] menu by pressing the UP / DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP /DOWN button and press the OK button.[Series] : New files are named using numbers that follow the previoussequence, even when a new memory card is used, or afterformatting, or after deleting all pictures. [Reset] : After using the reset function, the next file name will be set from0001 even after formatting, deleting all or inserting a new memorycard.5. Press the menu button twice and the menu will disappear.- The first stored folder name is 100SSCAM, and the first file name isS5000001.- File names are assigned sequentially from S5000001 ƍS5000002 ƍ~ ƍS5009999.- The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM ƍ101SSCAM ƍ~ ƍ999SSCAM.- The files used with the memory card conform to the DCF(Design rule forCamera File systems) format.[ File name ]ƈThis function allows the user to select the file naming format.SETUPFile Power OffLanguageFormatDate&TimeSeriesResetBack:Set:OK
ŝ54ŞSetup menu[ Auto power off ]ƈThis function switches the camera off after a set amount of time in order toprevent unnecessary battery drainage.ƃSub menus[Off] : The power off function will notoperate.[1, 3, 5, 10 min] : The power will turn off automaticallyif not used for the period of timespecified.- After replacing the battery, the power off setting willbe preserved. - Note that the automatic power off function will not operate if the camera is inPC mode, slide show, playing back a voice recording, playing back a movie clipand taking a composite shot.SETUPFile Power OffLanguageFormatDate&TimeOff1 min3 min5 min10 minBack:Set:OK[ Language ]ƈThere is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will bepreserved.- LANGUAGE sub menu : English, Korean, French,German, Spanish, Italian, S.Chinese, T.Chinese,Japanese, Russian, Portuguese, Dutch, Danish,Swedish, Finnish, Thai, BAHASA(MALAY /INDONESIAN), Arabic, Hungarian, Czech, Polishand Turkish.SETUPFile Power OffLanguageFormatDate&TimeENGLISHFRANÇAISDEUTSCHESPAÑOLBack:Set:OK
ŝ55Ş[ Formatting a memory ]ƈThis is used for formatting the memory. If you run [Format] on the memory, allimages, including the protected images, will be deleted. Be sure to downloadimportant images to your PC before formatting the memory.ƃSub menus[No] : The memory will not be formatted. Press themenu button three times and the menu displaywill disappear.[Yes] : A [Processing!] message appears and thememory will be formatted. If you ran FORMATin Play mode, a [No Image!] message willappear.Be sure to run [Format] on the following types of memory card.- A new memory card, or an unformatted memory card- A memory card that has a file this camera can't recognise or one that has beentaken from another camera.- Always format the memory card using this camera. If you insert a memory cardthat has been formatted using other cameras, memory card readers, or PCs,you will get a [Card Error!] message.Setup menuSETUPFile Power OffLanguageFormatDate&TimeNoYesBack:Set:OK[ Setting up the Date / Time / Date type ]ƈYou can change the date and time that will be displayed on the captured imagesand set up the date type.ƃSetting Date / Time & Selecting Date FormatRIGHT button : Selects the year/ month/ day/ hour/minute date type.LEFT button : Moves the cursor to the[Date&Time] main menu if thecursor is at the first item of the dateand time setup. In all other cases,the cursor will be shifted to the left of its current position.UP and DOWN buttons : Changes the setting value- Date type : [yy/mm/dd], [dd/mm/yy], [mm/dd/yy], [Off][ Imprinting the recording date ]ƈThere is an option to include DATE / TIME on still images.ƃSub menus[Off] : The DATE & TIME will not beimprinted on the image file.[Date] : Only the DATE will be imprinted onthe image file.[Date&Time] : The DATE & TIME will be imprintedon the image file.SETUPPower OffLanguageFormatDate&TimeImprintOffDateDate&TimeBack:Set:OKSETUPFile Power OffLanguageFormatDate&TimeBack:Set:OK05/12/01 07:35yy/mm/dd
ŝ56ŞSetup menu[ Sound ]ƈIf you set the operation sound to ON, various sounds will be activated for camerastartup, when button are pressed, so that you can be aware of the cameraoperation status.ƃ[Sound] sub menu : Off / Low / Medium / High[ Connecting an External Device (USB) ]ƈYou can select an external device to which you want to connect the camerausing the USB cable.ƃSub menus- [Computer] : Select this if you want to connect thecamera to your PC.Refer to page 68 for instructions onhow to connect the camera to yourPC.- [Printer] : Select this if you want to connect thecamera to your printer.Refer to page 49 for instructions onhow to connect the camera to yourprinter.SETUPLanguageFormatDate&TimeImprintSoundBack:Set:OKOffLowMediumHighSETUPFormatDate&TimeImprintSoundUSBBack:Set:OKComputerPrinter[ Auto Focus lamp ]ƈYou can turn on and off the Auto Focus lamp.ƃSub menus[Off] : The AF lamp will not light up in a low lightcondition. [On] : The AF lamp will light up in a low lightcondition. [ LCD brightness ]ƈYou can adjust the LCD brightness.ƃ[LCD] sub menu : Dark, Normal, BrightSETUPDate&TimeImprintSoundUSB AF LampBack:Set:OKOffOnSETUPImprintSoundUSB AF LampLCDBack:Set:OKDarkNormalBright
ŝ57Ş[ Selecting Video out type ]ƈThe Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV, etc.)to which the camera is connected. PAL mode can support only BDGHI.ƈConnecting to an external monitorƃUsing the AV cable with Cradle : Connect the cameraand the cradle. Connect the cradle to an externalmonitor with the supplied AV cable.ƃUsing the AV cable with Camera : Connect thecamera to an external monitor with the supplied AVcable.Yellow - VideoWhite - soundSetup menuSETUPSoundUSB AF LampLCDVideo OutBack:Set:OKNTSCPAL[Using the AV cable with Cradle][Using the AV cable with Camera]- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,Spain, Sweden, Switzerland, Thailand, Norway.- When using a TV as an external monitor, you will need to select the external orAV channel of the TV.- There will be a digital noise on the external monitor, but it is not a malfunction.- If the image is not in the centre of the screen, use the TV controls to centre it.- When the camera is connected to an external monitor, the menu will be visibleon the external monitor and the menu functions are the same as thoseindicated on the LCD monitor.- When selecting the PAL video out type, the TV monitor turns off and the LCDmonitor of the camera turns on when you record a movie. After completing therecording, the TV monitor turns on and the LCD monitor of the camera turnsoff.[ Quick view ]ƈIf you enable Quick View before capturing an image, you can view the imageyou just captured on the LCD monitor for the duration set in the [Quick View]setup. Quick view is possible only with still images.ƃSub menus[Off] : The quick view function can’t beactivated.[0.5, 1, 3 sec] : The captured image is brieflydisplayed during the selected time.SETUPUSB AF LampLCDVideo OutQuick ViewBack:Set:OKoff0.5 sec1 sec3 sec
ŝ58ŞSetup menu Setting up the Mycam menu[ Initialisation ]ƈAll camera menu and function settings will be restored to their default values.However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not bechanged.ƃSub menus[No] : Settings will not be restored to their defaults.[Yes] : All settings will be restored to their defaults.SETUPAF LampLCDVideo OutQuick ViewResetBack:Set:OKNoYes[ Selecting a battery type ]ƈIf a battery type is selected, the camera will beoptimized according to the selected battery type. ƃ[Battery Type] sub Menu: Alkaline / Ni-MH SETUPLCDVideo OutQuick ViewResetBattery TypeBack:Set:OKAlkalineNi-MHStart up imageƈYou can set up a start up image, start up sound and shutter sound. Everycamera working mode (with the exception of Voice recording mode) has theMyCAM menu. The items indicated by are default settings.Menu tab Main menu Sub menu PageOff LOGOUser Image 1 User Image 2Off Sound 1Sound 2 Sound 3Off Sound 1Sound 2 Sound 3Start ImageStart SoundShutter Soundp.58p.59p.59ſMenus are subject to change without prior notice.ƈYou can select the image that is first displayed on the LCD monitor wheneverthe camera is turned on.ƃStart up image : [Off], [LOGO], [User Image1], [User Image2]- Use a saved image for the start-up image with the[User Image] in the [RESIZE] menu in the playmode.- The start-up image will not be deleted by [DELETE]or [Format] menu.- The User images will be deleted by [Reset] menu.MYCAMStart ImageStart SoundShutter SoundBack:Set:OK
ŝ59ŞStart up soundShutter soundImportant notesƈYou can select the sound that is activated whenever the camera is turned on.ƃStart up sound : [Off], [Sound 1], [Sound 2], [Sound 3]- If the start up image is set to [Off], the start up soundwill not activate, even though you may have setthese to on. ƈYou can select the shutter sound.ƃShutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]MYCAMStart ImageStart SoundShutter SoundOffSound 1Sound 2Sound 3Back:Set:OKMYCAMStart ImageStart SoundShutter SoundOffSound 1Sound 2Sound 3Back:Set:OKBe sure to observe the following precautions!ƈThis unit contains precision electronic components. Do not use or store this unitin the following locations.- Areas exposed to severe changes in temperature and humidity.- Areas exposed to dust and dirt.- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.- Environments where there is high magnetism or excessive vibration.- Areas with high explosives or highly flammable materials.ƈDo not leave this camera in places subject to dust, chemicals (like naphthaleneand mothball), high temperature and high humidity.Keep this camera with silica gel in a hermetically sealed box when not planningto use the camera for a long period of timeƈSand can be particularly troublesome to cameras.- Do not let sand get inside the unit when using it on beaches, coastal dunes, orother areas where there is lots of sand.- Doing so may result in failure or may permanently render the unit unusable.ƈHandling the camera- Never drop the camera or subject it to severe shocks or vibrations.- Prevent the large size LCD monitor from an impact. When this camera is notused, keep this camera in the camera case. - Avoid obstructing the lens or the flash when you capture an image.- This camera is not waterproof.To avoid dangerous electrical shocks, never hold or operate the camera withwet hands.- If you use this camera in wet places, such as beach or pool, do not let water orsand get inside the camera. Doing so may result in failure or may permanentlydamage the unit.
ŝ60ŞImportant notesƈExtremes in temperature may cause problems.- If the camera is transferred from a cold to a warm and humid environment,condensation can form on the delicate electronic circuitry. If this occurs, turnthe camera off and wait for at least 1 hour until all moisture is dispersed.Moisture build up can also occur in the memory card. If this happens, turn offthe camera and remove the memory card. Wait until the moisture hasdispersed.ƈCaution on Using the Lens- If the lens is subjected to direct sunlight, it could result in discoloration anddeterioration of the image sensor.- Pay attention not to get fingerprints or foreign substances on the surface of thelens.- When the lens cover opens, the outer lens that you can see is for auto focus.When using or cleaning this camera, handle the outer lens with care.ƈIf the digital camera is not used for a long period, an electric discharge canoccur. It is a good idea to remove the battery and the memory card if you do not intendusing the camera for an extended period of time.ƈIf the camera is exposed to an electronic interference, it will turn itself off toprotect the memory card.ƈCamera Maintenance- Use a soft brush (available from photo stores) to gently clean the lens and LCDassemblies. If this does not work, lens-cleaning paper with lens cleaning fluidcan be used.Clean the camera body with a soft cloth. Do not allow this camera to come intocontact with solvent materials such as benzol, insecticide, thinners etc. Thismay damage the body shell of the camera and also affect its performance.Rough handling can damage the LCD monitor. Take care to avoid damageand keep the camera in its protective carry case at all times when not in use.ƈDo not attempt to disassemble or modify the camera.ƈUnder certain conditions, static electricity can cause the flash unit to fire. This isnot harmful to the camera and is not a malfunction.ƈWhen images are uploaded or downloaded (when the charger and USB cableare inserted into the cradle at the same time), the data transfer may be affectedby static electricity.In this case, disconnect and re-connect the USB cable before trying the transferagain.ƈBefore an important event or going on a trip, you should check the cameracondition. - Take a picture for testing the camera condition and prepare extra battery.- Samsung cannot be held responsible for camera malfunctions.
ŝ61ŞWarning indicatorBefore contacting a service centreƈThere are several warnings that may appear on the LCD displayCard Error!ϛMemory card errorƍTurn off the camera power and turn it on againƍInsert the memory card againƍInsert the memory card and format the memory card. (p.55)Card Locked!ϛThe memory card is lockedƍSD memory card : Slide the write protect switch to the top of the memory cardMemory Full! / Card Full!ϛThere is insufficient memory capacity to take an imageƍInsert a new memory cardƍDelete unnecessary image files to free up some memoryNo Image!ϛThere are no images stored on the memoryƍTake imagesƍInsert a memory card that is holding some imagesFile Error!ϛFile errorƍFormat the memory cardϛMemory card errorƍContact a camera service centreLow Battery!ϛThere is low battery capacityƍInsert fresh batteries.Low Light!ϛWhen taking pictures in dark placesƍTake pictures in Flash Photography mode.Out Of NumberϛWhen selecting too many printing pages in the PictBridge menu. ƍSelect printing page within the limitation. The camera doesn’t switch onϛThere is low battery capacityƍInsert fresh batteries. (p.9)ϛBattery are inserted incorrectly with the polarities reversedƍInsert the battery according to the polarity marks (+, -)ϛThe battery is not insertedƍInsert the battery and turn on the cameraƈPlease check the following
ŝ62ŞBefore contacting a service centreCamera does not take images when pressing the Shutter buttonϛThere is insufficient memory capacityƍDelete unnecessary image filesϛThe memory card has not been formattedƍFormat the memory card (p.55)ϛThe memory card is exhaustedƍInsert a new memory cardϛThe memory card is lockedƍRefer to [Card Locked!] error messageϛThe camera’s power is offƍTurn the camera power onϛThe battery are exhaustedƍInsert fresh batteries.ϛBattery is inserted incorrectly with the polarities reversedƍInsert the battery according to the polarity marks (+, -)The camera suddenly stops working while in use ϛThe camera was stopped due to a malfunctionƍRemove /re-insert battery and switch the camera onThe images are unclearϛA picture was taken the subject without setting an appropriate macro modeƍSelect an appropriate macro mode to take a clear image.ϛThe picture was taken with the subject beyond the flash rangeƍTake a picture within the flash rangeϛThe lens is smudged or dirtyƍClean the lensThe flash does not fireϛFlash off mode has been selectedƍDis-engage flash off modeϛThe camera mode can’t use the flashƍRefer to the FLASH instruction (p.21)Incorrect date and time is displayedϛThe date and time have been set incorrectly or the camera has adopted thedefault settingsƍReset the date and time correctlyThe camera buttons do not operateϛCamera malfunctionƍRemove /re-insert battery and switch the camera onA card error has occurred while the memory card is in the camera.ϛIncorrect memory card formatƍRe-format the memory card The images don't play backϛIncorrect file name (Violation of DCF format)ƍDo not change the image file nameColour of image is different to the original scene ϛWhite balance or effect setting is incorrectƍSelect appropriate White balance and effectImages are too brightϛExposure is excessiveƍReset exposure compensation
ŝ63ŞBefore contacting a service centre SpecificationsNo image on external monitorϛThe external monitor has not been connected properly with the cameraƍCheck the connection cablesϛThere are incorrect files in the memory cardƍInsert a memory card that has correct filesWhen using the PC’s explorer, the [Removable Disk] file does not showϛCable connection is incorrectƍCheck the connectionϛThe camera is offƍTurn the camera onϛThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~10.3. Alternatively the PC does not support USB.ƍInstall Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3 to PC thatsupports USB.ϛThe camera driver is not installedƍInstall a [USB Storage Driver]ƈImage Sensor- Type : 1/2.5" CCD- Effective Pixel : Approx. 5.1 Mega-pixel - Total Pixel : Approx. 5.3 Mega-pixelƈLens- Focal Length : SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35~105mm)- F No. : F2.8 ~ F7.1 (Wide), F4.9~F12.4 (Tele)- Digital Zoom :ŋStill Image mode : 1.0X ~ 5.0X ŋPlay mode : 1.0X ~ 10.1X (depends on image size)ƈLCD Monitor : 2.4" color TFT LCD (112,000 dots)ƈFocusing- Type : TTL auto focus- Range : ŋNormal : 80cm ~ infinityŋMacro : 5cm ~ 80cm (Wide), 40cm ~ 80cm (Tele)ŋAuto Macro : 5cm ~ Infinity (Wide), 40cm ~ Infinity (Tele)ƈShutter- Type : Mechanical and Electronic shutter - Speed : 1 ~ 1/5,000 sec. (Manual : 8 ~ 1/5,000 sec.)ƈExposure- Control : Program AE- Metering : Multi, Spot - Compensation : ±2EV (0.5EV steps)- ISO Equivalent : Auto, 50,100, 200, 400ƈFlash- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off- Range : Wide : 0.2m~3.0m, Tele : 0.4m ~ 2.5m (ISO AUTO) - Recharging Time : Approx. 6 sec.ƈSharpness : Soft, Normal, VividƈEffect : Normal, B&W, Sepia, Red, Blue, Green, Negative, RGB
ŝ64ŞSpecificationsƈWhite Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,Tungsten, Custom ƈVoice Recording : Voice Recording (max.1 hour), Voice Memo in Still Image (max. 10 sec.)ƈDate Imprinting : Date, Date&Time, Off (user selectable)ƈShooting- Still Image: ŋModes : Auto, Program, SceneſScene : Night, Portrait, Children (in Mode Dial), Landscape, Close-up, Sunset, Dawn, Backlight, Fireworks, Beach & SnowſMode Dial : Auto, Program, Manual, Movie, Scene, Portrait,Night, ChildrenŋContinuous : Single, Continuous, AEBŋSelf-timer : 10 sec., 2 sec., Double (10 sec., 2 sec.)- Movie Clip :ŋWith Audio or without Audio (user selectable, recording time : memory capacity dependent)ŋSize : 640x480, 320x240, 160x120 (3X Optical Zoom, Mute during Zoom Operation)ŋFrame rate : 30 fps, 15 fpsŋMovie Editing (Embedded): Pause during recording, Still Image CaptureƈStorage- Media :ŋInternal memory : Approx.20MB flash memory ŋExternal memory : MMC/SD card (Up to 1GB Guaranteed)- File Format :ŋStill Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0ŋMovie Clip : AVI (MJPEG)ŋAudio : WAV- Image Size5M 4M 3M 2M 1M VGA2592x1944 2272x1704 2048x1536 1600x1200 1024x768 640x480- Capacity (20 MB)* These figures are measured under SamsungŖs standard conditions and mayvary depending on shooting conditions and camera settingsƈImage Play- Type : Single image, Thumbnails, Slide show, Movie Clip- Editing : Trimming, Resizing, Rotate, EffectƈInterface- Digital output connector : USB 2.0 - Audio : Mono- Video output : NTSC, PAL (user selectable) - Cradle InterfaceƈPower Source- Primary Battery : 2x AA Alkaline(High Capacity)- Rechargeable battery(Optional) : SNB-2512 (Ni-MH)SBP-2524 (Ni-MH)ſIncluded battery may vary depending on sales region.ƈDimensions (WxHxD) : 97 X 62 X 28mm ƈWeight : Approx. 136.2gg (without batteries and card)ƈOperating Temperature : 0 ~ 40ŭCƈOperating Humidity : 5 ~ 85%ƈSoftware- Camera Driver : Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.2 ~ 10.3)- Application : Digimax Master ƈSpecial Features : User-friendly ŗEffect” button, Easy Grip, 2.4” Large LCD,Convenient Mode DialſSpecifications are subject to change without prior notice.ſAll trademarks are the property of their respective owners.5M 4M 3M 2M 1M VGASuper Fine 7Fine 14Normal 21Super Fine 10Fine18Normal 24Super Fine12Fine22Normal 32Super Fine19Fine34Normal 43Super Fine52Fine83Normal 89Super Fine114Fine125Normal 157
ŝ65ŞSoftware Notes About the softwareSystem RequirementsPlease ensure that you read the instruction manual carefully before use.ϛThe attached software is a camera driver and image editing software tool forWindows.ϛUnder no circumstances should all or part of either the software or the usermanual be reproduced.ϛCopyrights for software are licensed only for use with a camera.ϛIn the unlikely event of a manufacturing fault, we will repair or exchange yourcamera. We cannot, however, be held responsible in any way for damage caused byinappropriate use.ϛUsing a Hand-made PC or a PC and OS that has not been guaranteed by themanufacturer is not covered by the Samsung warranty.ϛBefore reading this manual, you should have a basic knowledge of computersand O/S (Operating Systems).After inserting the CD-ROM provided with this camera into the CD-ROM drive, thefollowing window should automatically run.Before connecting the camera to the PC, youshould first install the camera driver.ƃBe sure to check the system requirements before installing the driver.ƃYou should allow 5 ~ 10 seconds for running the automatic setup programaccording to the capability of your computer. If the frame does not show, runthe [Windows Explorer] and select [Samsung.exe] in the CD-ROM Driveroot directory.INFORMATIONFor Windows For MacintoshWindows 98/98SE/2000/ME/XP Mac OS 9.2 ~ 10.35QVQU]U5*:)5 5QVQU]U5*:)5200MB of available hard disk space110MB of available hard-disk spaceUSB port USB portCD-ROM drive CD-ROM drivePC with processor better than Pentium II 450MHz(Pentium 700MHz recommended)1024x768 pixels, 16bit color displaycompatible monitor(24bit color display recommended)Power Mac G3 or laterƈCamera driver : This enables images to transfer between the camera and PC.This camera uses the USB Storage Driver as the camera driver. You can usethe camera as a USB card reader. After installing the driver and connecting thiscamera to the PC, you can find [Removable Disk] in [Windows Explorer] or [Mycomputer]. A USB Storage Driver is provided only for Windows. A USB Driverfor MAC is not included with the Application CD. You can use the camera withMac OS 9.2 ~ 10.3.ƈDigimax Master : This is the all-in-on multi media software solution.You can download, view, edit and save your digital images and movie clips clipwith this software. This software is only compatible with Windows.
ŝ66ŞSetting up the application softwareƈTo use this camera with a PC, install the application software first.After this has been done, the stored images in the camera can be moved to thePC and can be edited by an image editing program.ƈYou can visit the Samsung web-site through the internet.http://www.samsungcamera.com : English1. The auto run frame will display. Click the[Install] menu in the Auto run frame.1588-7276___KIUMZI[MZ^QKMKWSZ2. Install the DirectX, Digimax Master by selecting a button shown on themonitor. [Click!][Click!][Click!][Click!][Click!][Click!][Click!][Click!][Click!][Click!][Click!][Click!][Click!]
ŝ67ŞSetting up the application software Starting PC mode4. Turn the camera power on. The [Found New Hardware Wizard] willopen and the computer will recognize thecamera. ſIf your OS is Windows XP, an imageviewer program will open.If the download window of Digmax Masteropens after starting Digimax Master, thecamera driver was setup successfully.3. After restarting the computer, connect the PC to the camera with the USBcable. ҮIf you connect the USB cable to a USB port on your PC and then turn on thepower, the camera will automatically switch to "computer connection mode".ҮIn this mode, you can download stored images to your PC through the USBcable.ҮThe LCD monitor is always turned off in PC mode.ƃIf you have installed the camera driver, The [Found New Hardware Wizard]may not open.ƃOn a Windows 98 or 98 SE system, the Found New Hardware Wizarddialog box opens and a window asking you to select a driver file mayappear. In this case, specify "USB Driver" in the CD supplied. (for Windows98 and 98 SE).INFORMATIONSETUPFormatDate&timeImprintSoundUSBBack:Set:OKComputerPrinterƈConnecting the camera to a PC1. In any mode with the exception of Voice Recordingmode, press the Menu button.2. Press the LEFT/ RIGHT button and select the[SETUP] menu tab.3. Select the [USB] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Use the UP and DOWN buttons to select[Computer], and then press the OK button.5. Press the menu button twice and the menu willdisappear. 6. Connect the PC to the camera with the USB cable.
ŝ68ŞStarting PC mode Removable diskƈDownloading stored imagesYou can download the still images stored on the camera to your PC's hard diskand print them or use a photo editing software to edit them.1. Connect the camera to your PC with the USB cable.2. On your computer's desktop display, select[My computer] and double click [RemovableDisk ƍDCIM ƍ100SSCAM].The image files will then be displayed.3. Select an image and press the rightmouse button.4. A pop-up menu will open.Click the [Cut] or [Copy] menu.- [Cut] : cuts a selected file.- [Copy] : copies files.5. Click a folder where you want to paste the file.[Using the USB cable with Cradle][Using the USB cable with Camera]ƈConnecting the camera to a PCƈDisconnecting the camera and PC : Refer to page 69(Removing the removable disk).ſIf you selected [Printer] in Step 4, when you connect the camera to yourprinter, the [Connecting Printer] message will display and the connection willnot be established.In this case, disconnect the USB cable, and then follow the procedure fromStep 2 and onward.ƃTo save battery power, it is recommended that you use the cradle whenconnecting the camera to a computer.INFORMATION
ŝ69ŞRemoving the removable diskRemovable disk ƃWe recommend that you should copy the images to the PC to view them.Opening images directly from the removable disk may be subject tounexpected disconnection.ƃWhen you upload a file that is not taken by this camera to the RemovableDisk, the [File Error!] message will be displayed on the LCD monitor in thePLAY mode, and nothing is displayed in THUMBNAIL mode.CAUTION7. An image file is transferred from the camerato your PC.6. Press the right mouse button and a pop-upmenu will open. Click [Paste].- By using [Digimax Master], you can see the stored images in the memorydirectly on the PC monitor and you can copy or move the image files.ƈWindows 98SE1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, you have to wait until the lamp illuminates.2. Unplug the USB cable.ƈWindows 2000/ME/XP(The illustrations may be different from the real display in accordance with theWindows O/S.)1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, you have to wait until the lamp illuminates.3. The [Unplug or Eject Hardware] window willopen. Select the [USB Mass Storage Device]and click the [Stop] button.4. The [Stop a Hardware device] window will open.Select the [USB Mass Storage Device] and clickthe [OK] button.2. Double-click the [Unplug or Eject Hardware] iconon the task bar.5. A [Safe to Remove Hardware] window willopen. Click the [OK] button.[Double-click!][Click!][Click!][Click!]
ŝ70ŞRemoving the USB Driver for Windows 98SERemoving the removable disk6. A [Unplug or Eject Hardware] window willopen. Click the [Close] button and theremovable disk will be removed safely.7. Unplug the USB cable.1. A USB Driver for MAC is not included with the software CD as MAC OSsupports the camera driver.2. Check the MAC OS. You can check the MAC OS version during MAC OSstart-up. This camera is compatible with MAC OS 9.2 ~ 10.3.3. Connect the camera to the Macintosh and turn the camera power on.4. A new icon will be displayed on the desktop after connecting the camera tothe MAC.1. Double click a new icon on the desktop and the folder in the memory will bedisplayed.2. Select an image file and copy or move it to MAC.ƃFor Mac OS 10.0 or later : First complete uploading from computer tocamera and then remove the removable diskwith the Extract command.CAUTIONSetting up the USB Driver for MACUsing the USB Driver for MAC[Click !]ƈTo remove the USB driver, refer to the process shown below.1. Connect the camera and your PC, turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 6. Uninstallation is complete. [Click !][Click !][Click !][Click !]4. Disconnect the USB cable. 5. Remove the [Digimax S500] on the Add/Remove Programs Properties.
ŝ71ŞDigimax MasterƈYou can download, view, edit and save your images and movies with thissoftware. This software is only compatible with Windows except for the Windows 98.ƈTo start the program, click [Start ƍPrograms ƍSamsung ƍDigimax Master].3. Click [Next(N) >] button.[Click !]ƃDownloading images1. Connect the camera to your PC.2. A window for downloading images willdisplay after connecting the camera andyour PC.- To download the captured images, selectthe [Select All(A)] button.- Select desired folder in the window andclick the [Select All(A)] button. You cansave captured images and selected folder.- If you click the [Cancel] button, downloading will becancelled.[Click !]4. Select a destination and make a folder tosave downloaded images and folders.- Folder names can be made in order of dateand images will be downloaded.- Folder name will be made as you want andimages will be downloaded.- After selecting a folder that was madebefore, images will be downloaded.5. Click [Next(N) >] button.6. A window will open as shown alongside.The destination of the selected folder will bedisplayed on the upper side of the window.Click the [Start] button to download theimages.[Click !]7. Downloaded images will be displayed.[Click!]
ŝ72ŞDigimax MasterƃImage viewer : You can view the stored images.ڹڽھڿںڻڼ- Image viewer functions are listed below.ڹMenu bar : You can select menus.File, Edit, View, Tools, Change functions, Auto download, help, etc.ںImage selection window : You can select the desired images in this window.ڻMedia type selection menu : You can select image viewer, image edit andmovie edit functions in this menu.ڼPreview window : You can preview a image or a movie clip and check themulti media information.ڽZoom bar : You can change preview size.ھFolder display window : You can see the folder location of the selectedimage.ڿImage display window : Images of the selected folder are displayed.ſRefer to the [Help] menu in Digimax Master for further information.ƃImage edit : You can edit the still image.ڹںڻڼ- Image edit functions are listed below.ڹEdit menu : You can select the following menus.[Tools] : You can resize or crop the selected image. See the [Help] menu.Adjust] : You can modify image quality. See the [Help] menu.[Retouch] : You can change image or insert effects on the image. See the[Help] menu.ںDrawing tools : Tools for editing an image.ڻImage display window : a selected image displays in this window.ڼPreview window : You can preview the changed image.ſA still image edited with Digimax Master can’t be played back on the camera.ſRefer to the [Help] menu in Digimax Master for further information.
ŝ73ŞFAQDigimax MasterƃMovie edit : You can get the still image, movie clip, narration, music files togetherin a movie clip. ڹں- Movie clip edit functions are listed below.ڹEdit menu : You can select the following menus.[Add Media] : You can add other media elements to a movie.[Edit Clip] : You can change the brightness, contrast, colour and saturation.[Effects] : You can insert an effect.[Set Text] : You can insert texts.[Narrate] : You can insert a narration.[Produce] : You can save the edited multi media as a new file name.Frame display window : You can insert multi media in thiswindow. You can select AVI, Windows media (wmv), Windowsmedia (asf) and movie clip for this camera (avi, MPEG-4) filetypes.ںFrame display window : You can insert multi media in this window.ſSome movie clips that was compressed with a codec that is not compatible withthe Digimax Master can’t play back in the Digimax Master.ſRefer to the [Help] menu in Digimax Master for further information.ƈPlease check the following if the USB connection malfunctions.Case 1 USB cable is not connected or it is not the supplied USB cable. ƍConnect the supplied USB cable. Case 2 The camera is not recognized by your PC.Sometimes, the camera may appear under [Unknown Devices] inDevice Manager. ƍInstall the camera driver correctly.Turn off the camera, remove the USB cable, plug in the USB cableagain, and then turn on the camera.Case 3 There is an unexpected error during file transfer.ƍTurn the camera power off and on again. Transfer the file again.Case 4 When using the USB hub.ƍThere may be a problem in connecting the camera to the PC throughthe USB hub if the PC and the hub are not compatible. Whereverpossible, connect the camera to the PC directly.Case 5 Are other USB cables connected to the PC?ƍThe camera may malfunction when it is connected to the PC at thesame time as another USB cable. In this case, disconnect the otherUSB cable, and connect only one USB cable to the camera.
ŝ74ŞFAQCase 6 When I open the Device Manager (by clicking Start ƍ(Settings) ƍControl Panel ƍ(Performance and Maintenance) ƍSystem ƍ(Hardware) ƍDevice Manager), there are Unknown Devices or OtherDevices entries with a yellow question mark(?) beside them or deviceswith an exclamation mark(!) beside them.ƍRight-click on the entry with the question (?) or exclamation (!) markand select "Remove". Restart the PC and connect the camera theagain. For Windows 98 PC, remove the camera driver also, restart thePC, and then reinstall the camera driver.Case 7 In some security programs (Norton Anti Virus, V3, etc.), the computermay not recognise the camera as a removable disk.ƍStop the security programs and connect the camera to the computer.Refer to the security program instructions about how to stop theprogram.ƈWhen the movie clip doesn’t play back on the PCſWhen the movie clip recorded by the camera doesn’t play back on the PC,the causes are mostly due to the codec installed on the PC.ƃWhen the DirectX 9.0 or later is not installedƍInstall the DirectX 9.0 or later1) Insert the CD provided with the camera2) Run the windows explorer and select the [CD-ROM drive:\ USBDriver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will beinstalled. Visit the following site for downloading theDirectX.http://www.microsoft.com/directxƃIf a PC (Windows 98) stops responding while the camera and PC are connectedrepeatedlyƍIf a PC (Windows 98) is turned on for a long time and the camera isconnected repeatedly, the PC may not recognise the camera. In this case, re-start the PC. ƃIf a PC connected with the camera stops responding while Windows is starting. ƍIn this case, disconnect the PC and the camera and Windows will start.If the problem happens continuously, set the Legacy USB Support to disableand re-start the PC. The Legacy USB Support is in the BIOS setup menu.(The BIOS setup menu differs from the PC manufacturers and some BIOSmenus don’t have Legacy USB Support) If you can’t change the menu byyourself, contact to the PC manufacturer or BIOS manufacturer. ƃIf the movie clip can’t be deleted, removable disk can’t be extracted or an errormessage displays during the file transfer. ƍIf you install only the Digimax Master, the problems mentioned aboveoccasionally happen. - Close the Digimax Master program by clicking the Digimax Master icon onthe Taskbar.- Install all the application programs included in the software CD. (You must install the Movie clip codec)
ŝ75ŞMEMO MEMO
ŝ76ŞMEMO MEMO
ŝ77ŞAn FCC warningCorrect Disposal of This ProductCorrect Disposal of This Product (Waste Electrical & ElectronicEquipment)(Applicable in the European Union and other European countries withseparate collection systems) This marking shown on the product or itsliterature, indicates that it should not be disposed with other householdwastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolledwaste disposal, please separate this from other types of wastes and recycle itresponsibly to promote the sustainable reuse of material resources. Householdusers should contact either the retailer where they purchased this product, or theirlocal government office, for details of where and how they can take this item forenvironmentally safe recycling. Business users should contact their supplier andcheck the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.ҮThis device has been tested in accordance with the limits of a class B digitaldevice under item 15 of the FCC rules. These limits are designed to provideprotection against harmful interference in commercial installation. Thisequipment generates, absorbs and can emit radio frequency energy. If it is notinstalled and used in accordance with the instructions, it may cause harmfulinterference to radio communication. There is however, no guarantee that interference will not occur in somesituations. Should any interference occur when this device is in operation,please try one or more of the following measures. ƈChange the location and direction of any aerial.ƈIncrease distance between the camera and the affected device.ƈUse a different socket away from the affected device.ƈPlease contact a Samsung agent or a radio/TV engineer.ҮThis device complies with part 15 of the FCC Rules.ҮChanges or modifications not expressly approved by the party responsible forcompliance could void user's authority to operate the equipment.

Navigation menu