Hanwha Techwin DIGIMAXS500 Digital Camera User Manual S500 en c v04

Samsung Techwin Co Ltd Digital Camera S500 en c v04

Contents

Users Manual 2

Download: Hanwha Techwin DIGIMAXS500 Digital Camera User Manual S500 en c v04
Mirror Download [FCC.gov]Hanwha Techwin DIGIMAXS500 Digital Camera User Manual S500 en c v04
Document ID615924
Application IDaRlPoECKZPkO57cU2XxX7Q==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize229.89kB (2873616 bits)
Date Submitted2005-12-29 00:00:00
Date Available2005-12-29 00:00:00
Creation Date2005-12-07 20:03:59
Producing SoftwareAcrobat Distiller 5.00 for Macintosh
Document Lastmod2005-12-16 17:59:27
Document TitleS500_en_c_v04
Document CreatorQuarkXPress(MAC): LaserWriter 8 8.3fc2
Document Author: samyoung

Delete (
) button
Printer button
ƈThis deletes images stored on the memory.
ƈ If you selectd [Computer] sub menu in the [USB]
setup menu, [Connecting Computer] message will
display when you connect the camera to your
printer and the conncection will not be established.
In this case, press the Printer button. [Connecting
Printer] message will display and the Easy printing
mode will be selected.
ƃDeleting Images in Play Mode
1. Select an image that you want to delete by
pressing the LEFT / RIGHT button and press the
DELETE(
) button.
2. A message will display as shown alongside on
the LCD monitor.
3. Select the submenu values by pressing
the LEFT / RIGHT button and then press
the OK button.
If [Yes] is selected : deletes the selected images.
If [No] is selected : cancels "Delete Image".
Delete?
Yes
No
Confirm:OK
ƃDeleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want
to delete, and then press the DELETE (
) button.
2. The following message will be displayed on the LCD monitor.
3. Select the submenu values by pressing the LEFT / RIGHT button and then
press the OK button.
If [Yes] is selected : deletes the selected images.
If [No] is selected
: cancels "Delete Image".
Press the
delete button.
Delete?
Yes
No
Confirm:OK
INFORMATION
ƃBefore deleting images from the camera, you should protect or download
images to your computer that you wish to keep.
ŝ40Ş
* In some instances the camera may not connect to the printer, this will depend on
the make of the printer.
- After the connection, the Easy printing menu
will display on the LCD monitor.
To display the PictBridge menu, press the
Menu button. For more information about the
PictBridge menu, refer to page 49.
IMAGES
One Pic
All Pics
Exit:MENU
Move:
Left / Right / Menu / OK button
ƈ LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button
: While the menu is showing, press the LEFT button to select
the menu tab to the left of the cursor. While the menu is not
showing, press the LEFT button to select the previous
image.
- RIGHT button : While the menu is showing, press the RIGHT button to select
the menu tab to the right of the cursor, or to move an
secondary menu. While the menu is not showing, press the
RIGHT button to select the next image.
- MENU button : When you press the MENU button, the play mode menu will
be displayed on the LCD monitor. Pressing it again will return
the LCD to the initial display.
- OK button
: When the menu is displayed on the LCD monitor, the OK
button is used for confirming data that is changed by using
the 5 function button.
Setting up the play back function using the LCD monitor
ƈ PLAY mode functions can be changed by using the LCD monitor. In the PLAY
mode, pressing the MENU button displays the menu on the LCD monitor. The
menus you can set up in Play mode are as follows. To capture an image after
setting up the play menu, press the PLAY mode button or shutter button.
Menu tab
Main menu
SLIDE
Sub menu
Secondary menu
Show
Play / Repeat Play
Interval
1, 3, 5, 10 sec
Effect
PROTECT
DELETE
RESIZE
Select
All Pics
OFF
Unlock / Lock
Select
All Pics
2272 X 1704
2048 X 1536
1600 X 1200
1024 X 768
640 X 480
User Image 1, 2
Page
p.43~44
p.44
p.45
p.45
ŝ41Ş
Setting up the play back function using the LCD monitor
Menu tab
Main menu
ROTATE
DPOF
COPY TO CARD
OSD
INFORMATION
Sub menu
Secondary menu
Right 90º
Left 90º
180º
Horizontal
Vertical
Standard
Select / All Pics / Cancel
Index
No / Yes
Size
Select / All Pics / Cancel
No
Yes
Full
Basic
OSD Off
Page
ƈ This menu is available while the camera is connected to a PictBridge supporting
printer (direct connection to the camera, sold separately) with a USB cable.
Menu tab
p.46
Main menu
IMAGES
AUTO SET
Sub menu
Secondary menu
One Pic
All Pics
No
Yes
p.50
p.50
Auto
p.46
Postcard
Card
4X6
p.48
Size
2L
Letter
p.49
A4
CUSTOM
A3
SET
Auto
Full
Layout
16
Index
ŝ42Ş
Page
p.51
Setting up the play back function using the LCD monitor
Menu tab
Main menu
Sub menu
Secondary menu
Page
Auto
Type
Plain
Auto
Quality
SET
Draft
Normal
Fine
p.51
Auto
Date
Off
On
Auto
File name
Off
On
PRINT
DPOF PRINT
RESET
Standard
Index
No
Yes
No
Yes
ſ Menus are subject to change without prior notice.
ƈ Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab.
Photo
Fastphoto
CUSTOM
Starting the slide show
p.51
p.52
ƃ Start the slide show : The slide show can start only in the [Show] menu.
1. Use the Up / Down buttons to select the [Show]
SLIDE
menu and press the Right button.
Show
Play
2. Select a desired sub menu by pressing the Up /
Interval
Repeat Play
Effect
Down button.
[Play]
: The slide show is closed after one
Back:
Set:OK
cycle.
[Repeat Play] : The slide show is repeated until
cancelled.
3. Press the OK button to save the configuration.
ƃ Setting play interval: Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the UP /
DOWN button and press the RIGHT button.
2. Use the Up / Down buttons to select the desired
interval.
3. Press the OK button to save the configuration.
SLIDE
Show
Interval
Effect
1 sec
3 sec
5 sec
10 sec
Back:
Set:OK
p.52
INFORMATION
ƃ The loading time depends on the image size and quality.
ƃ While the slide show is playing, only the first frame of a MOVIE file is
displayed.
ƃ While the slide show is playing, the voice recording file will not display.
ŝ43Ş
Starting the slide show
ƃ Configure slide show effects : Unique screen effects can be used for the slide
show.
1. Select the [Effect] sub menu by pressing the
SLIDE
UP / DOWN button and press the RIGHT button.
Show
OFF
2. Use the Up / Down button to select the type of
Interval
Effect
effect.
: Normal display.
Back:
Set:OK
: Image is displayed slowly.
: Image is displayed slowly from the centre
outwards.
: Image moves from the top left.
: The image slides diagonally from top left to
bottom right.
: The image slides irregularly.
3. Press the OK button to confirm the setting.
Protecting images
ƈ This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
ƃ Protecting Images
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[PROTECT] menu tab.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select ] : Selection window for an image to be
protected/released is displayed.
- Up / Down / Left / Right : Select an image
- Zoom W / T Button : Protect / release the image
- OK button
: Your changes will be saved
and the menu will
disappear.
[All Pics] : Protect / release all saved images
- Zoom W / T Button : Protect / release the images
- OK button
: Your changes will be saved
and the menu will disappear.
- If you protect an image, the protect icon will be
displayed on the LCD monitor. (An unprotected
image has no indicator)
- An image in LOCK mode will be protected from
the delete function or [Delete] functions, but will
NOT be protected from the [Format] function.
ŝ44Ş
PROTECT
Select
All Pics
Exit:MENU
Move:
Unlock
Set:OK
Unlock
Set:OK
Deleting images
ƈ Of all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted. Remember that this will permanently delete
unprotected images. Important shots should be stored on a computer before
deletion takes place. The startup image is stored in the camera's internal
memory (i.e., not on the memory card) and it will not be deleted even if you
delete all files on the memory card.
ƃ Deleting images
1. Press the play mode button and press the menu
DELETE
button.
Select
2. Press the LEFT / RIGHT button and select the
All Pics
[Delete] menu tab.
3. Select a desired sub menu by pressing the UP /
Exit:MENU
Move:
DOWN button and press the OK button.
[Select] : Selection window for an image to delete
is displayed.
- Up / Down / Left / Right : Select an image
- Zoom T Button : Select the image for deletion.
Select:T
mark)
Del:OK
- OK Button
: Press the OK Button to display
the confirmation message.
Select the [Yes] menu and press
Delete?
the OK button to delete
Yes
No
marked images.
Confirm:OK
[All Pics] : Displays confirmation window. Select the
Del:OK
[Yes] menu and press the OK button to
delete all unprotected images. If there aren’t protected images, all
the images are deleted and a [No Image!] message will display.
4. After deletion, the screen will be changed to the play mode screen.
Resize
ƈ Change the resolution (size) of pictures taken. Select the [User Image] to save
an image to be the start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[RESIZE] menu tab.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
RESIZE
2272X1704
2048X1536
1600X1200
1024X768
640X480
Exit:MENU
Move:
ƃ Image Resize Types
Resize
2272 X
1704
2048 X
1536
1600 X
1200
1024 X
768
640 X
480
User
Image
5M
4M
3M
2M
1M
VGA
ƃ A large sized image can be resized to a smaller sized image, but not vice versa.
ƃ Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files
can’t be resized.
ƃ You can change the resolution of only those files compressed in the JPEG 4:2:2
format.
ƃ The resized image will have a new file name. The [User Image] image is stored
not on the memory card but on the internal memory.
ƃ Only two [User Image] images can be saved.
ƃ If the memory capacity is insufficient to store the resized image, a [Memory Full!]
message will display on the LCD monitor and the resized image will not be
stored.
ŝ45Ş
Rotating an image
DPOF
ƈ You can rotate the stored images by various degrees. Once the playback of the
rotated picture is finished, it will switch back to the original state.
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[ROTATE] menu tab.
3. Select a desired sub menu by pressing the UP /
DOWN button.
[Right 90˚] :
Rotate picture in a
clock-wise direction
[Left 90˚] :
Rotate picture in a counterclock-wise direction
[Horizontal] :
Rotate picture horizontally
ƈ The DPOF indicator will display on the LCD monitor when an image that has
DPOF information plays back. Images can then be printed on DPOF printers,
or at an increasing number of photo labs.
ROTATE
Right 90
Left 90
180
Horizontal
Vertical
?W2@@?he
?7] button.
2. A window for downloading images will
display after connecting the camera and
your PC.
- To download the captured images, select
the [Select All(A)] button.
- Select desired folder in the window and
click the [Select All(A)] button. You can
save captured images and selected folder.
- If you click the [Cancel] button, downloading will be
cancelled.
[Click!]
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
[Click !]
[Click !]
3. Click [Next(N) >] button.
7. Downloaded images will be displayed.
[Click !]
ŝ71Ş
Digimax Master
ƃ Image viewer : You can view the stored images.
‫ڹ‬
ƃ Image edit : You can edit the still image.
‫ڽ‬
‫ھ‬
‫ڹ‬
‫ڿ‬
‫ں‬
‫ڼ‬
‫ڻ‬
‫ڼ‬
‫ں‬
‫ڻ‬
- Image viewer functions are listed below.
‫ ڹ‬Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
‫ ں‬Image selection window : You can select the desired images in this window.
‫ ڻ‬Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
‫ ڼ‬Preview window : You can preview a image or a movie clip and check the
multi media information.
‫ ڽ‬Zoom bar : You can change preview size.
‫ ھ‬Folder display window : You can see the folder location of the selected
image.
‫ ڿ‬Image display window : Images of the selected folder are displayed.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ72Ş
- Image edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the
[Help] menu.
‫ ں‬Drawing tools : Tools for editing an image.
‫ ڻ‬Image display window : a selected image displays in this window.
‫ ڼ‬Preview window : You can preview the changed image.
ſ A still image edited with Digimax Master can’t be played back on the camera.
ſ Refer to the [Help] menu in Digimax Master for further information.
Digimax Master
FAQ
ƃ Movie edit : You can get the still image, movie clip, narration, music files together
in a movie clip.
‫ڹ‬
ƈ Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
ƍ Connect the supplied USB cable.
Case 2
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
ƍ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
ƍ Turn the camera power off and on again. Transfer the file again.
Case 4
When using the USB hub.
ƍ There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
Case 5
Are other USB cables connected to the PC?
ƍ The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
‫ں‬
- Movie clip edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
Frame display window : You can insert multi media in this
window. You can select AVI, Windows media (wmv), Windows
media (asf) and movie clip for this camera (avi, MPEG-4) file
types.
‫ ں‬Frame display window : You can insert multi media in this window.
ſ Some movie clips that was compressed with a codec that is not compatible with
the Digimax Master can’t play back in the Digimax Master.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ73Ş
FAQ
Case 6
Case 7
When I open the Device Manager (by clicking Start ƍ (Settings) ƍ
Control Panel ƍ (Performance and Maintenance) ƍ System ƍ
(Hardware) ƍ Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
ƍ Right-click on the entry with the question (?) or exclamation (!) mark
and select "Remove". Restart the PC and connect the camera the
again. For Windows 98 PC, remove the camera driver also, restart the
PC, and then reinstall the camera driver.
In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
ƍ Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to stop the
program.
ƈ When the movie clip doesn’t play back on the PC
ſ When the movie clip recorded by the camera doesn’t play back on the PC,
the causes are mostly due to the codec installed on the PC.
ƃ When the DirectX 9.0 or later is not installed
ƍ Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be
installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx
ƃ If a PC (Windows 98) stops responding while the camera and PC are connected
repeatedly
ƍ If a PC (Windows 98) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera. In this case, restart the PC.
ƃ If a PC connected with the camera stops responding while Windows is starting.
ƍ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
ƃ If the movie clip can’t be deleted, removable disk can’t be extracted or an error
message displays during the file transfer.
ƍ If you install only the Digimax Master, the problems mentioned above
occasionally happen.
- Close the Digimax Master program by clicking the Digimax Master icon on
the Taskbar.
- Install all the application programs included in the software CD.
(You must install the Movie clip codec)
ŝ74Ş
MEMO
MEMO
ŝ75Ş
MEMO
ŝ76Ş
MEMO
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
An FCC warning
ҮThis device has been tested in accordance with the limits of a class B digital
device under item 15 of the FCC rules. These limits are designed to provide
protection against harmful interference in commercial installation. This
equipment generates, absorbs and can emit radio frequency energy. If it is not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communication.
There is however, no guarantee that interference will not occur in some
situations. Should any interference occur when this device is in operation,
please try one or more of the following measures.
ƈ Change the location and direction of any aerial.
ƈ Increase distance between the camera and the affected device.
ƈ Use a different socket away from the affected device.
ƈ Please contact a Samsung agent or a radio/TV engineer.
ҮThis device complies with part 15 of the FCC Rules.
ҮChanges or modifications not expressly approved by the party responsible for
compliance could void user's authority to operate the equipment.
ŝ77Ş


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:12:07 20:03:59+09:00
Modify Date                     : 2005:12:16 17:59:27+09:00
Page Count                      : 39
Creation Date                   : 2005:12:07 20:03:59+09:00
Mod Date                        : 2005:12:16 17:59:27+09:00
Producer                        : Acrobat Distiller 5.00 for Macintosh
Author                          : samyoung
Metadata Date                   : 2005:12:16 17:59:27+09:00
Creator                         : samyoung
Title                           : S500_en_c_v04
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NLMDIGIMAXS500

Navigation menu