Hanwha Techwin DIGIMAXS500 Digital Camera User Manual S500 en c v04

Samsung Techwin Co Ltd Digital Camera S500 en c v04

Contents

Users Manual 2

ŝ40Ş
Delete ( ) button Printer button
ƈIf you selectd [Computer] sub menu in the [USB]
setup menu, [Connecting Computer] message will
display when you connect the camera to your
printer and the conncection will not be established.
In this case, press the Printer button. [Connecting
Printer] message will display and the Easy printing
mode will be selected.
* In some instances the camera may not connect to the printer, this will depend on
the make of the printer.
- After the connection, the Easy printing menu
will display on the LCD monitor.
To display the PictBridge menu, press the
Menu button. For more information about the
PictBridge menu, refer to page 49.
ƈThis deletes images stored on the memory.
ƃDeleting Images in Play Mode
1. Select an image that you want to delete by
pressing the LEFT / RIGHT button and press the
DELETE( ) button.
2. A message will display as shown alongside on
the LCD monitor.
3. Select the submenu values by pressing
the LEFT / RIGHT button and then press
the OK button.
If [Yes] is selected : deletes the selected images.
If [No] is selected : cancels "Delete Image".
ƃBefore deleting images from the camera, you should protect or download
images to your computer that you wish to keep.
INFORMATION
ƃDeleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want
to delete, and then press the DELETE ( ) button.
2. The following message will be displayed on the LCD monitor.
3. Select the submenu values by pressing the LEFT / RIGHT button and then
press the OK button.
If [Yes] is selected : deletes the selected images.
If [No] is selected : cancels "Delete Image".
Delete?
Yes No
Confirm:OK
Delete?
Yes No
Confirm:OK
Press the
delete button.
IMAGES
One Pic
All Pics
Exit:MENU Move:
ŝ41Ş
ƈPLAY mode functions can be changed by using the LCD monitor. In the PLAY
mode, pressing the MENU button displays the menu on the LCD monitor. The
menus you can set up in Play mode are as follows. To capture an image after
setting up the play menu, press the PLAY mode button or shutter button.
Menu tab Main menu Sub menu Secondary menu Page
Show Play / Repeat Play
Interval 1, 3, 5, 10 sec
OFF
Select
All Pics
Select -
All Pics -
2272 X 1704 -
2048 X 1536 -
1600 X 1200 -
1024 X 768 -
640 X 480 -
User Image 1, 2 -
SLIDE
PROTECT
DELETE
RESIZE
p.43~44
p.44
p.45
p.45
Effect
Unlock / Lock
Left / Right / Menu / OK button
Setting up the play back function using the LCD monitor
ƈLEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select
the menu tab to the left of the cursor. While the menu is not
showing, press the LEFT button to select the previous
image.
- RIGHT button : While the menu is showing, press the RIGHT button to select
the menu tab to the right of the cursor, or to move an
secondary menu. While the menu is not showing, press the
RIGHT button to select the next image.
- MENU button : When you press the MENU button, the play mode menu will
be displayed on the LCD monitor. Pressing it again will return
the LCD to the initial display.
- OK button : When the menu is displayed on the LCD monitor, the OK
button is used for confirming data that is changed by using
the 5 function button.
ŝ42Ş
Setting up the play back function using the LCD monitor
Menu tab Main menu Sub menu Secondary menu Page
One Pic -
All Pics -
No -
Yes -
Auto
Postcard
Card
4X6
L
2L
Letter
A4
A3
Auto
Full
1
2
4
8
9
16
Index
IMAGES
AUTO SET
CUSTOM
SET
Size
p.50
p.50
p.51
ƈThis menu is available while the camera is connected to a PictBridge supporting
printer (direct connection to the camera, sold separately) with a USB cable.
Layout
Menu tab Main menu Sub menu Secondary menu Page
Right 90º -
Left 90º -
180º -
Horizontal -
Vertical -
Standard
Select / All Pics / Cancel
DPOF Index No / Yes p.46
Size
Select / All Pics / Cancel
No -
Yes -
Full -
Basic -
OSD Off -
p.49
p.48
p.46
ROTATE
COPY TO CARD
OSD
INFORMATION
ŝ43Ş
ƃStart the slide show : The slide show can start only in the [Show] menu.
1. Use the Up / Down buttons to select the [Show]
menu and press the Right button.
2. Select a desired sub menu by pressing the Up /
Down button.
[Play] : The slide show is closed after one
cycle.
[Repeat Play] : The slide show is repeated until
cancelled.
3. Press the OK button to save the configuration.
ƃSetting play interval: Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the UP /
DOWN button and press the RIGHT button.
2. Use the Up / Down buttons to select the desired
interval.
3. Press the OK button to save the configuration.
ƃThe loading time depends on the image size and quality.
ƃWhile the slide show is playing, only the first frame of a MOVIE file is
displayed.
ƃWhile the slide show is playing, the voice recording file will not display.
INFORMATION
ƈImages can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab.
Setting up the play back function using the LCD monitor
Starting the slide show
SLIDE
Show
Interval
Effect
Back:
Set:OK
Play
Repeat Play
SLIDE
Show
Interval
Effect
Back:
Set:OK
1 sec
3 sec
5 sec
10 sec
Menu tab Main menu Sub menu Secondary menu Page
Auto
Plain
Photo
Fastphoto
Auto
Draft
Normal
Fine
Auto
Date Off
On
Auto
File name Off
On
Standard -
Index -
No -
Yes -
No -
Yes -
Type
p.51
ſMenus are subject to change without prior notice.
Quality
CUSTOM
SET
p.51
p.52
p.52
PRINT
DPOF PRINT
RESET
ŝ44Ş
Starting the slide show Protecting images
ƈThis is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
ƃProtecting Images
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[PROTECT] menu tab.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select ] : Selection window for an image to be
protected/released is displayed.
- Up / Down / Left / Right : Select an image
- Zoom W / T Button : Protect / release the image
- OK button : Your changes will be saved
and the menu will
disappear.
[All Pics] : Protect / release all saved images
- Zoom W / T Button : Protect / release the images
- OK button : Your changes will be saved
and the menu will disappear.
- If you protect an image, the protect icon will be
displayed on the LCD monitor. (An unprotected
image has no indicator)
- An image in LOCK mode will be protected from
the delete function or [Delete] functions, but will
NOT be protected from the [Format] function.
PROTECT
Select
All Pics
Exit:MENU Move:
Set:OK
W
Unlock
T
Set:OK
W
Unlock
T
ƃConfigure slide show effects : Unique screen effects can be used for the slide
show.
1. Select the [Effect] sub menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Use the Up / Down button to select the type of
effect.
: Normal display.
: Image is displayed slowly.
: Image is displayed slowly from the centre
outwards.
: Image moves from the top left.
: The image slides diagonally from top left to
bottom right.
: The image slides irregularly.
3. Press the OK button to confirm the setting.
SLIDE
Show
Interval
Effect
Back:
Set:OK
OFF
ŝ45Ş
ƈChange the resolution (size) of pictures taken. Select the [User Image] to save
an image to be the start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[RESIZE] menu tab.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
ƃA large sized image can be resized to a smaller sized image, but not vice versa.
ƃOnly JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files
can’t be resized.
ƃYou can change the resolution of only those files compressed in the JPEG 4:2:2
format.
ƃThe resized image will have a new file name. The [User Image] image is stored
not on the memory card but on the internal memory.
ƃOnly two [User Image] images can be saved.
ƃIf the memory capacity is insufficient to store the resized image, a [Memory Full!]
message will display on the LCD monitor and the resized image will not be
stored.
ƃImage Resize Types
5M O O O O O O
4M X O O O O O
3M X X O O O O
2M X X X O O O
1M X X X X O O
VGA X X X X X O
Resize
2272 X
1704
2048 X
1536
1600 X
1200
1024 X
768
640 X
480
User
Image
Deleting images Resize
RESIZE
Exit:MENU Move:
2272X1704
2048X1536
1600X1200
1024X768
640X480
ƈOf all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted. Remember that this will permanently delete
unprotected images. Important shots should be stored on a computer before
deletion takes place. The startup image is stored in the camera's internal
memory (i.e., not on the memory card) and it will not be deleted even if you
delete all files on the memory card.
ƃDeleting images
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[Delete] menu tab.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select] : Selection window for an image to delete
is displayed.
- Up / Down / Left / Right : Select an image
- Zoom T Button : Select the image for deletion.
( mark)
- OK Button : Press the OK Button to display
the confirmation message.
Select the [Yes] menu and press
the OK button to delete
marked images.
[All Pics] : Displays confirmation window. Select the
[Yes] menu and press the OK button to
delete all unprotected images. If there aren’t protected images, all
the images are deleted and a [No Image!] message will display.
4. After deletion, the screen will be changed to the play mode screen.
DELETE
Select
All Pics
Exit:MENU Move:
Del:OK
Select:T
Del:OK
Delete?
Yes No
Confirm:OK
ŝ46Ş
Rotating an image DPOF
ƈYou can rotate the stored images by various degrees. Once the playback of the
rotated picture is finished, it will switch back to the original state.
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[ROTATE] menu tab.
3. Select a desired sub menu by pressing the UP /
DOWN button.
[Right 90˚] :
Rotate picture in a
clock-wise direction
[Left 90˚] :
Rotate picture in a counter-
clock-wise direction
[Horizontal] :
Rotate picture horizontally
[Vertical] :
Rotate picture vertically
[180˚] :
Rotate picture 180
degrees
4. Press the OK button and the rotated image will be displayed.
If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
ƈDPOF(Digital Print Order Format) allows you to embed printing information on
your memory card’s MISC folder. Select the pictures to be printed and how
many prints to make.
ƈThe DPOF indicator will display on the LCD monitor when an image that has
DPOF information plays back. Images can then be printed on DPOF printers,
or at an increasing number of photo labs.
ƈThis function is not available for Movie clips and Voice recording files.
ƈWhen this menu is selected without inserting a memory card, you can select
the[DPOF] menu but yhe menu can't be run.
ROTATE
Exit:MENU Move:
Right 90
Left 90
180
Horizontal
Vertical
ŝ47Ş
DPOF : Standard DPOF : Index
ƈThis function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[DPOF] menu tab.
3. Select the [Standard] menu by pressing the UP /
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select] : Selection window for an image to print is
displayed.
-
Up / Down / Left / Right :
Select an image to print.
- Zoom W / T Button : Select the number of prints.
[All Pics] : Configure number of prints for all
pictures except movie and voice files.
- W / T button : Select a number of prints
[Cancel] : Cancel the print setup.
5. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF
indicator ( ) will show.
ƈImages (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[DPOF] menu tab.
3. Select the [Index] menu by pressing the UP /
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP /
DOWN button.
If [No] is selected : Cancel the index print setting.
If [Yes] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
DPOF
Standard
Index
Size
Back:
Set:OK
Select
All Pics
Cancel
Set:OK
W
00Print
T
DPOF
Standard
Index
Size
Back:
Set:OK
No
Yes
Set:OK
?
8:16<
<
ŝ48Ş
DPOF : Print size Copy To Card
ƈThis enables you to copy image files, movie clips and voice recording files to the
memory card.
ƃCopying to the Memory Card
1. Press the play mode button and press the menu
button.
2. Select the [COPY TO CARD] menu tab by
pressing the LEFT / RIGHT button.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
- [No] : Cancels "Copy to Card".
- [Yes] : All images, movie clips and voice recording files saved in the internal
memory are copied to the memory card after the [Processing!]
message is displayed. After copying has been completed, the
screen will return to play mode.
ƃWhen this menu is selected without inserting a memory card, you can select
the [COPY TO CARD] menu but the menu can’t be run.
ƃIf there is not enough space available in the memory card to copy saved
images in the internal memory (20MB), the [COPY TO CARD] command
will copy only some of the images and display [Card Full!] message. Then
the system will return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory card into the
camera.
ƃWhen you move the images that are stored in the internal memory by doing
[COPY TO CARD] to the card, the next number of file names will be created
in the card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu was set : The copied file names
start from after the last stored file name.
- When the [Series] of the [File] setup menu was set : The copied file names
start from after the last captured file name. After completing [COPY TO
CARD], the last stored image of the last copied folder is displayed on the
LCD monitor.
INFORMATION
COPY TO CARD
Exit:MENU Move:
No
Yes
ƈYou can specify the print size when printing images stored on the memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.
ſDPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10
ƃSetting the Print Size
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[DPOF] menu tab.
3. Select the [Size] menu by pressing the UP /
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select] : Selection window for an image to be
changed printed size is displayed.
-
Up / Down / Left / Right :
Select an image.
- Zoom W / T Button : Change the print size.
- OK button : Your changes will be saved
and the menu will
disappear.
[All Pics] : Change print size of all saved images.
- W / T button : Select a print size
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
ƃDepending on the manufacturer and print model, canceling the printing may
take a little longer for the printer to process.
INFORMATION
Set:OK
W
Cancel
T
DPOF
Standard
Index
Size
Back:
Set:OK
Select
All Pics
Cancel
Set:OK
W
Cancel
T
ŝ49Ş
On Screen Display information PictBridge
ƈYou can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
ƃSetting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT / RIGHT button and select
[SETUP] menu tab.
3. Select [USB] menu by pressing the UP / DOWN
button and press the RIGHT button.
4. Select [Printer] menu by pressing the UP / DOWN
button and press the OK button.
SETUP
Format
Date&Time
Imprint
Sound
USB
Back:
Set:OK
Computer
Printer
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
ƈYou can check shooting information about the displayed image.
ƃHow to select the type of information you want to see
1. Press the play mode button and press the menu
button.
2. Select the [OSD INFORMATION] menu tab by
pressing the LEFT / RIGHT button.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
OSD INFORMATION
Exit:MENU Move:
Full
Basic
OSD Off
ƈConnecting the Camera to a Printer
ƃUsing the USB cable with Cradle (Optional) :
Connect the camera and the cradle. Connect the cradle to a printer’s USB
port with the supplied USB cable.
ƃUsing the USB cable with Camera :
Connect the camera to a printer’s USB port with the supplied USB cable.
[Full] [Basic]
[OSD Off]
ISO : 50
Av : F 2.8
Tv : 1/30
Flash : On
1024ŦŦ768
2005/12/01
Presssing the playmode
button for over 1sec.
Presssing the playmode
button for over 1sec.
ŝ50Ş
PictBridge : Picture Selection
PictBridge : Print Setting
Exit:Shutter Set:OK
ƃSetting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies
to print will appear as shown below.
PREV

NEXT
0
Exit:Shutter Set:OK
0
AUTO SET
No
Yes
Exit:MENU Move:
ƈAUTO SET
1. Use the LEFT and RIGHT buttons to select the
[AUTO SET] menu tab.
2. Use the UP and DOWN buttons to select the
desired submenu value, and then press the OK
button.
[No] : [CUSTOM SET] values are kept.
[Yes] : All values in the [CUSTOM SET] are
automatically changed.
ƈEasy printing
When you connect the camera to printer in the Play
back mode, you can print a picture easily.
- Pressing the printer( ) button :
Currently displayed image will be printed with the
printer’s default setting.
- Pressing the Left / Right button :
Selects a previous / next image.
ƈSelect pictures to print
1. Press the Menu button.
2. The [IMAGES] menu will appear.
3. Use the UP and DOWN buttons to select the
desired submenu value, and then press the OK
button.
When [One Pic] is selected : The PictBridge
function will be
applied only to the picture currently displayed.
When [All Pics] is selected : The PictBridge function will be applied to all
pictures, excluding movie clips and voice files.
ſIf you selected [Computer] in Step 4, when you connect the camera to your
printer, the [Connecting Computer] message will display and the connection will
not be established. In this case, disconnect the USB cable, and then follow the
procedure from Step 2 and onward. Or, press the Printer button and the camera
is connected to the printer displaying the [Connecting Computer] message. But,
the camera may not connect to the printer and turn off according to the printer
manufacturer.
IMAGES
One Pic
All Pics
Exit:MENU Move:
Print: Menu:OK
[When [One Pic] is selected] [When [All Pics] is selected]
- Press the Up / Down button to select the number of prints.
- When [One Pic] is selected : Use the Left / Right button to select another
picture. After selecting another picture, select select the number of prints for
another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of
prints.
ŝ51Ş
PictBridge : Print Setting PictBridge : Printing
ƈPrinting Pictures
1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.
2. Use the UP and DOWN buttons to select the desired submenu value, and
then press the OK button.
[Standard] : Print the pictures stored in the
memory card in set numbers.
One picture is printed on one
piece of paper.
[Index] : Print multiple images on one
sheet of paper.
3. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the
[No Image!] message will be displayed. Press the
LEFT button while printing to cancel the printing
and the [PRINT] menu is displayed.
ſNumber of pictures in an index print varies
depends on the printer used.
001 / 001
PRINT
Standard
Index
Exit:MENU Move:
Cancel:
Now Printing
ƈCustom Set : You can select the Paper Size, Print Format, Paper Type, Print
Quality, Date Print, and File Name Print menus for printed pictures.
1. Use the LEFT and RIGHT buttons to select the
[CUSTOM SET] menu tab.
2. Use the UP and DOWN buttons to select the
desired submenu value, and then press the RIGHT
button.
3. Use the UP and DOWN buttons to select the
desired submenu value, and then press the OK
button.
ſSome menu options are not supported in all manufacturer and printer models.
If not supported, the menus are still displayed in the LCD, but are not selectable.
ſIf the setting values are not changed in the automatic / manual setting, the
setting values are automatically kept.
Menu
Setting the size of the printing
paper
Setting the number of pictures to
be printed on a sheet of paper
Setting the quality of the printing
paper
Setting the quality of the picture
to be printed
Setting whether to print the date
Setting whether to print the file
name
Size
Layout
Type
Quality
Date
File Name
Auto, PostCard, Card, 4x6, L, 2L,
Letter, A4, A3
Auto, Full, 1, 2, 4, 8, 9, 16, Index
Auto, Plain, Photo, FastPhoto
Auto, Draft, Normal, Fine
Auto, Off, On
Auto, Off, On
Function Sub menu
CUSTOM SET
Size
Layout
Type
Quality
Date
Auto
Auto
Auto
Auto
Auto
Exit:MENU Move:
ŝ52Ş
PictBridge : DPOF print Setup menu
PictBridge : RESET
1. Use the LEFT and RIGHT buttons to select the
[RESET] menu tab.
2. Use the UP and DOWN buttons to select the
desired submenu value, and then press the OK
button.
If [No] is selected : Settings will not be reset.
If [Yes is selected : All print and image settings
will be reset.
ſDefault print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your
printer.
RESET
No
Yes
Exit:MENU Move:
ƈDPOF Print : This allows you to directly print the files with DPOF information.
ƈInitialises user-changed configurations.
1. Use the LEFT and RIGHT buttons to select the
[DPOF PRINT] menu tab.
2. Use the UP and DOWN buttons to select the
desired submenu value, and then press the
OK button.
[No] : Cancel the printing
[Yes] : Directly print the file with the DPOF
information
ſDepending on the manufacturer and printer model, some menus may not be
available.
With a printer without supporting the DPOF, the menu is still displayed but not
available.
DPOF PRINT
No
Yes
Exit:MENU Move:
Menu tab Main menu Sub menu Secondary menu Page
Series -
Reset -
Off, 1, 3, 5, 10 min - p.54
No -
Yes -
05/12/01 13:00 -
yy/mm/dd -
dd/mm/yy -
mm/dd/yy -
Off -
Off -
Date -
Date&Time -
Off -
Low -
Medium -
High -
ENGLISH FRANÇAIS
DEUTSCH ESPAÑOL ITALIANO
P”CCK»…
PORTUGUÊS
DUTCH
DANSK SVENSKA SUOMI
BAHASA
POLSKI Magyar
--
File
Power Off
Language
Format
Date&Time
Imprint
Sound
p.53
p.54
p.55
p.56
p.55
p.55
ƈIn this mode, you can set up basic settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
The items indicated by are default settings.
ŝ53Ş
Setup menu
ſMenus are subject to change without prior notice.
Menu tab Main menu Sub menu Secondary menu Page
Computer
-
Printer
-
Off
-
On
-
Dark
-
Normal
-
Bright
-
NTSC -
PAL -
Quick View Off / 0.5, 1, 3 sec - p.57
No
-
Yes
-
Alkaline -
Ni-MH -
AF Lamp
LCD
Video Out
Reset
Battery type
p.56
p.56
p.57
p.58
p.58
USB p.56
ƃAssigning File Names
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT / RIGHT button and select the
[SETUP] menu tab.
3. Select the [File ] menu by pressing the UP / DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Series] : New files are named using numbers that follow the previous
sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures.
[Reset] : After using the reset function, the next file name will be set from
0001 even after formatting, deleting all or inserting a new memory
card.
5. Press the menu button twice and the menu will disappear.
- The first stored folder name is 100SSCAM, and the first file name is
S5000001.
- File names are assigned sequentially from S5000001 ƍS5000002 ƍ~ ƍ
S5009999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM ƍ101SSCAM ƍ~ ƍ999SSCAM.
- The files used with the memory card conform to the DCF(Design rule for
Camera File systems) format.
[ File name ]
ƈThis function allows the user to select the file naming format.
SETUP
File
Power Off
Language
Format
Date&Time
Series
Reset
Back:
Set:OK
ŝ54Ş
Setup menu
[ Auto power off ]
ƈThis function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
ƃSub menus
[Off] : The power off function will not
operate.
[1, 3, 5, 10 min] : The power will turn off automatically
if not used for the period of time
specified.
- After replacing the battery, the power off setting will
be preserved.
- Note that the automatic power off function will not operate if the camera is in
PC mode, slide show, playing back a voice recording, playing back a movie clip
and taking a composite shot.
SETUP
File
Power Off
Language
Format
Date&Time
Off
1 min
3 min
5 min
10 min
Back:
Set:OK
[ Language ]
ƈThere is a choice of languages that can be displayed on the LCD monitor.
Even if the battery is removed and inserted again, the language setting will be
preserved.
- LANGUAGE sub menu : English, Korean, French,
German, Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai, BAHASA(MALAY /
INDONESIAN), Arabic, Hungarian, Czech, Polish
and Turkish.
SETUP
File
Power Off
Language
Format
Date&Time
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
Back:
Set:OK
ŝ55Ş
[ Formatting a memory ]
ƈThis is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
ƃSub menus
[No] : The memory will not be formatted. Press the
menu button three times and the menu display
will disappear.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you ran FORMAT
in Play mode, a [No Image!] message will
appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
Setup menu
SETUP
File
Power Off
Language
Format
Date&Time
No
Yes
Back:
Set:OK
[ Setting up the Date / Time / Date type ]
ƈYou can change the date and time that will be displayed on the captured images
and set up the date type.
ƃSetting Date / Time & Selecting Date Format
RIGHT button : Selects the year/ month/ day/ hour/
minute date type.
LEFT button : Moves the cursor to the
[Date&Time] main menu if the
cursor is at the first item of the date
and time setup. In all other cases,
the cursor will be shifted to the left of its current position.
UP and DOWN buttons : Changes the setting value
- Date type : [yy/mm/dd], [dd/mm/yy], [mm/dd/yy], [Off]
[ Imprinting the recording date ]
ƈThere is an option to include DATE / TIME on still images.
ƃSub menus
[Off] : The DATE & TIME will not be
imprinted on the image file.
[Date] : Only the DATE will be imprinted on
the image file.
[Date&Time] : The DATE & TIME will be imprinted
on the image file.
SETUP
Power Off
Language
Format
Date&Time
Imprint
Off
Date
Date&Time
Back:
Set:OK
SETUP
File
Power Off
Language
Format
Date&Time
Back:
Set:OK
05/12/01
07:35
yy/mm/dd
ŝ56Ş
Setup menu
[ Sound ]
ƈIf you set the operation sound to ON, various sounds will be activated for camera
startup, when button are pressed, so that you can be aware of the camera
operation status.
ƃ[Sound] sub menu : Off / Low / Medium / High
[ Connecting an External Device (USB) ]
ƈYou can select an external device to which you want to connect the camera
using the USB cable.
ƃSub menus
- [Computer] : Select this if you want to connect the
camera to your PC.
Refer to page 68 for instructions on
how to connect the camera to your
PC.
- [Printer] : Select this if you want to connect the
camera to your printer.
Refer to page 49 for instructions on
how to connect the camera to your
printer.
SETUP
Language
Format
Date&Time
Imprint
Sound
Back:
Set:OK
Off
Low
Medium
High
SETUP
Format
Date&Time
Imprint
Sound
USB
Back:
Set:OK
Computer
Printer
[ Auto Focus lamp ]
ƈYou can turn on and off the Auto Focus lamp.
ƃSub menus
[Off] : The AF lamp will not light up in a low light
condition.
[On] : The AF lamp will light up in a low light
condition.
[ LCD brightness ]
ƈYou can adjust the LCD brightness.
ƃ[LCD] sub menu : Dark, Normal, Bright
SETUP
Date&Time
Imprint
Sound
USB
AF Lamp
Back:
Set:OK
Off
On
SETUP
Imprint
Sound
USB
AF Lamp
LCD
Back:
Set:OK
Dark
Normal
Bright
ŝ57Ş
[ Selecting Video out type ]
ƈThe Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
ƈConnecting to an external monitor
ƃUsing the AV cable with Cradle : Connect the camera
and the cradle. Connect the cradle to an external
monitor with the supplied AV cable.
ƃUsing the AV cable with Camera : Connect the
camera to an external monitor with the supplied AV
cable.
Yellow - Video
White - sound
Setup menu
SETUP
Sound
USB
AF Lamp
LCD
Video Out
Back:
Set:OK
NTSC
PAL
[Using the AV cable with Cradle]
[Using the AV cable with Camera]
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway.
- When using a TV as an external monitor, you will need to select the external or
AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre it.
- When the camera is connected to an external monitor, the menu will be visible
on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.
- When selecting the PAL video out type, the TV monitor turns off and the LCD
monitor of the camera turns on when you record a movie. After completing the
recording, the TV monitor turns on and the LCD monitor of the camera turns
off.
[ Quick view ]
ƈIf you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
ƃSub menus
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
SETUP
USB
AF Lamp
LCD
Video Out
Quick View
Back:
Set:OK
off
0.5 sec
1 sec
3 sec
ŝ58Ş
Setup menu Setting up the Mycam menu
[ Initialisation ]
ƈAll camera menu and function settings will be restored to their default values.
However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be
changed.
ƃSub menus
[No] : Settings will not be restored to their defaults.
[Yes] : All settings will be restored to their defaults.
SETUP
AF Lamp
LCD
Video Out
Quick View
Reset
Back:
Set:OK
No
Yes
[ Selecting a battery type ]
ƈIf a battery type is selected, the camera will be
optimized according to the selected battery type.
ƃ[Battery Type] sub Menu: Alkaline / Ni-MH
SETUP
LCD
Video Out
Quick View
Reset
Battery Type
Back:
Set:OK
Alkaline
Ni-MH
Start up image
ƈYou can set up a start up image, start up sound and shutter sound. Every
camera working mode (with the exception of Voice recording mode) has the
MyCAM menu. The items indicated by are default settings.
Menu tab Main menu Sub menu Page
Off LOGO
User Image 1 User Image 2
Off Sound 1
Sound 2 Sound 3
Off Sound 1
Sound 2 Sound 3
Start Image
Start Sound
Shutter Sound
p.58
p.59
p.59
ſMenus are subject to change without prior notice.
ƈYou can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
ƃStart up image : [Off], [LOGO], [User Image1],
[User Image2]
- Use a saved image for the start-up image with the
[User Image] in the [RESIZE] menu in the play
mode.
- The start-up image will not be deleted by [DELETE]
or [Format] menu.
- The User images will be deleted by [Reset] menu.
MYCAM
Start Image
Start Sound
Shutter Sound
Back:
Set:OK
ŝ59Ş
Start up sound
Shutter sound
Important notes
ƈYou can select the sound that is activated whenever the camera is turned on.
ƃStart up sound : [Off], [Sound 1], [Sound 2], [Sound 3]
- If the start up image is set to [Off], the start up sound
will not activate, even though you may have set
these to on.
ƈYou can select the shutter sound.
ƃShutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]
MYCAM
Start Image
Start Sound
Shutter Sound
Off
Sound 1
Sound 2
Sound 3
Back:
Set:OK
MYCAM
Start Image
Start Sound
Shutter Sound
Off
Sound 1
Sound 2
Sound 3
Back:
Set:OK
Be sure to observe the following precautions!
ƈThis unit contains precision electronic components. Do not use or store this unit
in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
ƈDo not leave this camera in places subject to dust, chemicals (like naphthalene
and mothball), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning
to use the camera for a long period of time
ƈSand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or
other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
ƈHandling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Prevent the large size LCD monitor from an impact. When this camera is not
used, keep this camera in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with
wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or
sand get inside the camera. Doing so may result in failure or may permanently
damage the unit.
ŝ60Ş
Important notes
ƈExtremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this occurs, turn
the camera off and wait for at least 1 hour until all moisture is dispersed.
Moisture build up can also occur in the memory card. If this happens, turn off
the camera and remove the memory card. Wait until the moisture has
dispersed.
ƈCaution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and
deterioration of the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the
lens.
- When the lens cover opens, the outer lens that you can see is for auto focus.
When using or cleaning this camera, handle the outer lens with care.
ƈIf the digital camera is not used for a long period, an electric discharge can
occur.
It is a good idea to remove the battery and the memory card if you do not intend
using the camera for an extended period of time.
ƈIf the camera is exposed to an electronic interference, it will turn itself off to
protect the memory card.
ƈCamera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid
can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into
contact with solvent materials such as benzol, insecticide, thinners etc. This
may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage
and keep the camera in its protective carry case at all times when not in use.
ƈDo not attempt to disassemble or modify the camera.
ƈUnder certain conditions, static electricity can cause the flash unit to fire. This is
not harmful to the camera and is not a malfunction.
ƈWhen images are uploaded or downloaded (when the charger and USB cable
are inserted into the cradle at the same time), the data transfer may be affected
by static electricity.
In this case, disconnect and re-connect the USB cable before trying the transfer
again.
ƈBefore an important event or going on a trip, you should check the camera
condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
ŝ61Ş
Warning indicator
Before contacting a service centre
ƈThere are several warnings that may appear on the LCD display
Card Error!
ϛMemory card error
ƍTurn off the camera power and turn it on again
ƍInsert the memory card again
ƍInsert the memory card and format the memory card. (p.55)
Card Locked!
ϛThe memory card is locked
ƍSD memory card : Slide the write protect switch to the top of the memory card
Memory Full! / Card Full!
ϛThere is insufficient memory capacity to take an image
ƍInsert a new memory card
ƍDelete unnecessary image files to free up some memory
No Image!
ϛThere are no images stored on the memory
ƍTake images
ƍInsert a memory card that is holding some images
File Error!
ϛFile error
ƍFormat the memory card
ϛMemory card error
ƍContact a camera service centre
Low Battery!
ϛThere is low battery capacity
ƍInsert fresh batteries.
Low Light!
ϛWhen taking pictures in dark places
ƍTake pictures in Flash Photography mode.
Out Of Number
ϛWhen selecting too many printing pages in the PictBridge menu.
ƍSelect printing page within the limitation.
The camera doesn’t switch on
ϛThere is low battery capacity
ƍInsert fresh batteries. (p.9)
ϛBattery are inserted incorrectly with the polarities reversed
ƍInsert the battery according to the polarity marks (+, -)
ϛThe battery is not inserted
ƍInsert the battery and turn on the camera
ƈPlease check the following
ŝ62Ş
Before contacting a service centre
Camera does not take images when pressing the Shutter button
ϛThere is insufficient memory capacity
ƍDelete unnecessary image files
ϛThe memory card has not been formatted
ƍFormat the memory card (p.55)
ϛThe memory card is exhausted
ƍInsert a new memory card
ϛThe memory card is locked
ƍRefer to [Card Locked!] error message
ϛThe camera’s power is off
ƍTurn the camera power on
ϛThe battery are exhausted
ƍInsert fresh batteries.
ϛBattery is inserted incorrectly with the polarities reversed
ƍInsert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ϛThe camera was stopped due to a malfunction
ƍRemove /re-insert battery and switch the camera on
The images are unclear
ϛA picture was taken the subject without setting an appropriate macro mode
ƍSelect an appropriate macro mode to take a clear image.
ϛThe picture was taken with the subject beyond the flash range
ƍTake a picture within the flash range
ϛThe lens is smudged or dirty
ƍClean the lens
The flash does not fire
ϛFlash off mode has been selected
ƍDis-engage flash off mode
ϛThe camera mode can’t use the flash
ƍRefer to the FLASH instruction (p.21)
Incorrect date and time is displayed
ϛThe date and time have been set incorrectly or the camera has adopted the
default settings
ƍReset the date and time correctly
The camera buttons do not operate
ϛCamera malfunction
ƍRemove /re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ϛIncorrect memory card format
ƍRe-format the memory card
The images don't play back
ϛIncorrect file name (Violation of DCF format)
ƍDo not change the image file name
Colour of image is different to the original scene
ϛWhite balance or effect setting is incorrect
ƍSelect appropriate White balance and effect
Images are too bright
ϛExposure is excessive
ƍReset exposure compensation
ŝ63Ş
Before contacting a service centre Specifications
No image on external monitor
ϛThe external monitor has not been connected properly with the camera
ƍCheck the connection cables
ϛThere are incorrect files in the memory card
ƍInsert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
ϛCable connection is incorrect
ƍCheck the connection
ϛThe camera is off
ƍTurn the camera on
ϛThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~
10.3. Alternatively the PC does not support USB.
ƍInstall Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3 to PC that
supports USB.
ϛThe camera driver is not installed
ƍInstall a [USB Storage Driver]
ƈImage Sensor
- Type : 1/2.5" CCD
- Effective Pixel : Approx. 5.1 Mega-pixel
- Total Pixel : Approx. 5.3 Mega-pixel
ƈLens
-
Focal Length : SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35~105mm)
- F No. : F2.8 ~ F7.1 (Wide), F4.9~F12.4 (Tele)
- Digital Zoom :ŋStill Image mode : 1.0X ~ 5.0X
ŋPlay mode : 1.0X ~ 10.1X (depends on image size)
ƈLCD Monitor : 2.4" color TFT LCD (112,000 dots)
ƈFocusing
- Type : TTL auto focus
- Range : ŋNormal : 80cm ~ infinity
ŋMacro : 5cm ~ 80cm (Wide), 40cm ~ 80cm (Tele)
ŋAuto Macro : 5cm ~ Infinity (Wide), 40cm ~ Infinity (Tele)
ƈShutter
- Type : Mechanical and Electronic shutter
- Speed : 1 ~ 1/5,000 sec. (Manual : 8 ~ 1/5,000 sec.)
ƈExposure
- Control : Program AE
- Metering : Multi, Spot
- Compensation : ±2EV (0.5EV steps)
- ISO Equivalent : Auto, 50,100, 200, 400
ƈFlash
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
- Range : Wide : 0.2m~3.0m, Tele : 0.4m ~ 2.5m (ISO AUTO)
- Recharging Time : Approx. 6 sec.
ƈSharpness : Soft, Normal, Vivid
ƈEffect : Normal, B&W, Sepia, Red, Blue, Green, Negative, RGB
ŝ64Ş
Specifications
ƈWhite Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
ƈVoice Recording : Voice Recording (max.1 hour),
Voice Memo in Still Image (max. 10 sec.)
ƈDate Imprinting : Date, Date&Time, Off (user selectable)
ƈShooting
- Still Image: ŋModes : Auto, Program, Scene
ſ
Scene : Night, Portrait, Children (in Mode Dial), Landscape, Close-
up, Sunset, Dawn, Backlight, Fireworks, Beach & Snow
ſMode Dial : Auto, Program, Manual, Movie, Scene, Portrait,
Night, Children
ŋContinuous : Single, Continuous, AEB
ŋSelf-timer : 10 sec., 2 sec., Double (10 sec., 2 sec.)
- Movie Clip :ŋWith Audio or without Audio
(user selectable, recording time : memory capacity dependent)
ŋSize : 640x480, 320x240, 160x120
(3X Optical Zoom, Mute during Zoom Operation)
ŋFrame rate : 30 fps, 15 fps
ŋ
Movie Editing (Embedded): Pause during recording, Still Image Capture
ƈStorage
- Media :ŋInternal memory : Approx.20MB flash memory
ŋExternal memory : MMC/SD card (Up to 1GB Guaranteed)
- File Format :ŋStill Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
ŋMovie Clip : AVI (MJPEG)
ŋAudio : WAV
- Image Size
5M 4M 3M 2M 1M VGA
2592x1944 2272x1704 2048x1536 1600x1200 1024x768 640x480
- Capacity (20 MB)
* These figures are measured under SamsungŖs standard conditions and may
vary depending on shooting conditions and camera settings
ƈImage Play
- Type : Single image, Thumbnails, Slide show, Movie Clip
- Editing : Trimming, Resizing, Rotate, Effect
ƈInterface
- Digital output connector : USB 2.0 - Audio : Mono
- Video output : NTSC, PAL (user selectable) - Cradle Interface
ƈPower Source
- Primary Battery : 2x AA Alkaline(High Capacity)
- Rechargeable battery(Optional) : SNB-2512 (Ni-MH)
SBP-2524 (Ni-MH)
ſIncluded battery may vary depending on sales region.
ƈDimensions (WxHxD) : 97 X 62 X 28mm
ƈWeight : Approx. 136.2gg (without batteries and card)
ƈOperating Temperature : 0 ~ 40ŭC
ƈOperating Humidity : 5 ~ 85%
ƈSoftware
-
Camera Driver : Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.2 ~ 10.3)
- Application : Digimax Master
ƈSpecial Features : User-friendly ŗEffect” button, Easy Grip, 2.4” Large LCD,
Convenient Mode Dial
ſSpecifications are subject to change without prior notice.
ſAll trademarks are the property of their respective owners.
5M 4M 3M 2M 1M VGA
Super Fine
7
Fine 14
Normal 21
Super Fine
10
Fine
18
Normal
24
Super Fine
12
Fine
22
Normal
32
Super Fine
19
Fine
34
Normal
43
Super Fine
52
Fine
83
Normal
89
Super Fine
114
Fine
125
Normal
157
ŝ65Ş
Software Notes About the software
System Requirements
Please ensure that you read the instruction manual carefully before use.
ϛThe attached software is a camera driver and image editing software tool for
Windows.
ϛUnder no circumstances should all or part of either the software or the user
manual be reproduced.
ϛCopyrights for software are licensed only for use with a camera.
ϛIn the unlikely event of a manufacturing fault, we will repair or exchange your
camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
ϛUsing a Hand-made PC or a PC and OS that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
ϛBefore reading this manual, you should have a basic knowledge of computers
and O/S (Operating Systems).
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
ƃBe sure to check the system requirements before installing the driver.
ƃYou should allow 5 ~ 10 seconds for running the automatic setup program
according to the capability of your computer. If the frame does not show, run
the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive
root directory.
INFORMATION
For Windows For Macintosh
Windows 98/98SE/2000/ME/XP Mac OS 9.2 ~ 10.3
5QVQU]U5*:)5 5QVQU]U5*:)5
200MB of available hard disk space
110MB of available hard-disk space
USB port USB port
CD-ROM drive CD-ROM drive
PC with processor better than Pentium II 450MHz
(Pentium 700MHz recommended)
1024x768 pixels, 16bit color display
compatible monitor
(24bit color display recommended)
Power Mac G3 or later
ƈCamera driver : This enables images to transfer between the camera
and PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver
for MAC is not included with the Application CD. You can use the camera with
Mac OS 9.2 ~ 10.3.
ƈDigimax Master : This is the all-in-on multi media software solution.
You can download, view, edit and save your digital images and movie clips clip
with this software. This software is only compatible with Windows.
ŝ66Ş
Setting up the application software
ƈTo use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
ƈYou can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
1. The auto run frame will display. Click the
[Install] menu in the Auto run frame.
1588-7276
___KIUMZI[MZ^QKMKWSZ
2. Install the DirectX, Digimax Master by selecting a button shown on the
monitor.
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
[Click!]
ŝ67Ş
Setting up the application software Starting PC mode
4. Turn the camera power on.
The [Found New Hardware Wizard] will
open and the computer will recognize the
camera.
ſIf your OS is Windows XP, an image
viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was setup successfully.
3. After restarting the computer, connect the PC to the camera with the USB
cable.
ҮIf you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
ҮIn this mode, you can download stored images to your PC through the USB
cable.
ҮThe LCD monitor is always turned off in PC mode.
ƃIf you have installed the camera driver, The [Found New Hardware Wizard]
may not open.
ƃOn a Windows 98 or 98 SE system, the Found New Hardware Wizard
dialog box opens and a window asking you to select a driver file may
appear. In this case, specify "USB Driver" in the CD supplied. (for Windows
98 and 98 SE).
INFORMATION
SETUP
Format
Date&time
Imprint
Sound
USB
Back:
Set:OK
Computer
Printer
ƈConnecting the camera to a PC
1. In any mode with the exception of Voice Recording
mode, press the Menu button.
2. Press the LEFT/ RIGHT button and select the
[SETUP] menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[Computer], and then press the OK button.
5. Press the menu button twice and the menu will
disappear.
6. Connect the PC to the camera with the USB cable.
ŝ68Ş
Starting PC mode Removable disk
ƈDownloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk ƍDCIM ƍ100SSCAM].
The image files will then be displayed.
3. Select an image and press the right
mouse button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
ƈConnecting the camera to a PC
ƈDisconnecting the camera and PC : Refer to page 69
(Removing the removable disk).
ſIf you selected [Printer] in Step 4, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.
ƃTo save battery power, it is recommended that you use the cradle when
connecting the camera to a computer.
INFORMATION
ŝ69Ş
Removing the removable diskRemovable disk
ƃWe recommend that you should copy the images to the PC to view them.
Opening images directly from the removable disk may be subject to
unexpected disconnection.
ƃWhen you upload a file that is not taken by this camera to the Removable
Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.
CAUTION
7. An image file is transferred from the camera
to your PC.
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
- By using [Digimax Master], you can see the stored images in the memory
directly on the PC monitor and you can copy or move the image files.
ƈWindows 98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, you have to wait until the lamp illuminates.
2. Unplug the USB cable.
ƈWindows 2000/ME/XP
(The illustrations may be different from the real display in accordance with the
Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, you have to wait until the lamp illuminates.
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
4. The [Stop a Hardware device] window will open.
Select the [USB Mass Storage Device] and click
the [OK] button.
2. Double-click the [Unplug or Eject Hardware] icon
on the task bar.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
[Double-click!]
[Click!]
[Click!]
[Click!]
ŝ70Ş
Removing the USB Driver for Windows 98SE
Removing the removable disk
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.
7. Unplug the USB cable.
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS
start-up.
This camera is compatible with MAC OS 9.2 ~ 10.3.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to
the MAC.
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
2. Select an image file and copy or move it to MAC.
ƃFor Mac OS 10.0 or later : First complete uploading from computer to
camera and then remove the removable disk
with the Extract command.
CAUTION
Setting up the USB Driver for MAC
Using the USB Driver for MAC
[Click !]
ƈTo remove the USB driver, refer to the process shown below.
1. Connect the camera and your PC, turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
6. Uninstallation is complete.
[Click !]
[Click !]
[Click !]
[Click !]
4. Disconnect the USB cable.
5. Remove the [Digimax S500] on the Add/Remove Programs Properties.
ŝ71Ş
Digimax Master
ƈYou can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows except for
the Windows 98.
ƈTo start the program, click [Start ƍPrograms ƍSamsung ƍDigimax Master].
3. Click [Next(N) >] button.
[Click !]
ƃDownloading images
1. Connect the camera to your PC.
2. A window for downloading images will
display after connecting the camera and
your PC.
- To download the captured images, select
the [Select All(A)] button.
- Select desired folder in the window and
click the [Select All(A)] button. You can
save captured images and selected folder.
- If you click the [Cancel] button, downloading will be
cancelled.
[Click !]
4. Select a destination and make a folder to
save downloaded images and folders.
- Folder names can be made in order of date
and images will be downloaded.
- Folder name will be made as you want and
images will be downloaded.
- After selecting a folder that was made
before, images will be downloaded.
5. Click [Next(N) >] button.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
[Click !]
7. Downloaded images will be displayed.
[Click!]
ŝ72Ş
Digimax Master
ƃImage viewer : You can view the stored images.
ڹڽ
ھ
ڿ
ں
ڻ
ڼ
- Image viewer functions are listed below.
ڹMenu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
ںImage selection window : You can select the desired images in this window.
ڻMedia type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
ڼPreview window : You can preview a image or a movie clip and check the
multi media information.
ڽZoom bar : You can change preview size.
ھFolder display window : You can see the folder location of the selected
image.
ڿImage display window : Images of the selected folder are displayed.
ſRefer to the [Help] menu in Digimax Master for further information.
ƃImage edit : You can edit the still image.
ڹ
ں
ڻ
ڼ
- Image edit functions are listed below.
ڹEdit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the
[Help] menu.
ںDrawing tools : Tools for editing an image.
ڻImage display window : a selected image displays in this window.
ڼPreview window : You can preview the changed image.
ſA still image edited with Digimax Master can’t be played back on the camera.
ſRefer to the [Help] menu in Digimax Master for further information.
ŝ73Ş
FAQDigimax Master
ƃMovie edit : You can get the still image, movie clip, narration, music files together
in a movie clip.
ڹ
ں
- Movie clip edit functions are listed below.
ڹEdit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects] : You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
Frame display window : You can insert multi media in this
window. You can select AVI, Windows media (wmv), Windows
media (asf) and movie clip for this camera (avi, MPEG-4) file
types.
ںFrame display window : You can insert multi media in this window.
ſSome movie clips that was compressed with a codec that is not compatible with
the Digimax Master can’t play back in the Digimax Master.
ſRefer to the [Help] menu in Digimax Master for further information.
ƈPlease check the following if the USB connection malfunctions.
Case 1 USB cable is not connected or it is not the supplied USB cable.
ƍConnect the supplied USB cable.
Case 2 The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
ƍInstall the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
Case 3 There is an unexpected error during file transfer.
ƍTurn the camera power off and on again. Transfer the file again.
Case 4 When using the USB hub.
ƍThere may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
Case 5 Are other USB cables connected to the PC?
ƍThe camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
ŝ74Ş
FAQ
Case 6 When I open the Device Manager (by clicking Start ƍ(Settings) ƍ
Control Panel ƍ(Performance and Maintenance) ƍSystem ƍ
(Hardware) ƍDevice Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
ƍRight-click on the entry with the question (?) or exclamation (!) mark
and select "Remove". Restart the PC and connect the camera the
again. For Windows 98 PC, remove the camera driver also, restart the
PC, and then reinstall the camera driver.
Case 7 In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
ƍStop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to stop the
program.
ƈWhen the movie clip doesn’t play back on the PC
ſWhen the movie clip recorded by the camera doesn’t play back on the PC,
the causes are mostly due to the codec installed on the PC.
ƃWhen the DirectX 9.0 or later is not installed
ƍInstall the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be
installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx
ƃIf a PC (Windows 98) stops responding while the camera and PC are connected
repeatedly
ƍIf a PC (Windows 98) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera. In this case, re-
start the PC.
ƃIf a PC connected with the camera stops responding while Windows is starting.
ƍIn this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
ƃIf the movie clip can’t be deleted, removable disk can’t be extracted or an error
message displays during the file transfer.
ƍIf you install only the Digimax Master, the problems mentioned above
occasionally happen.
- Close the Digimax Master program by clicking the Digimax Master icon on
the Taskbar.
- Install all the application programs included in the software CD.
(You must install the Movie clip codec)
ŝ75Ş
MEMO MEMO
ŝ76Ş
MEMO MEMO
ŝ77Ş
An FCC warningCorrect Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
ҮThis device has been tested in accordance with the limits of a class B digital
device under item 15 of the FCC rules. These limits are designed to provide
protection against harmful interference in commercial installation. This
equipment generates, absorbs and can emit radio frequency energy. If it is not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communication.
There is however, no guarantee that interference will not occur in some
situations. Should any interference occur when this device is in operation,
please try one or more of the following measures.
ƈChange the location and direction of any aerial.
ƈIncrease distance between the camera and the affected device.
ƈUse a different socket away from the affected device.
ƈPlease contact a Samsung agent or a radio/TV engineer.
ҮThis device complies with part 15 of the FCC Rules.
ҮChanges or modifications not expressly approved by the party responsible for
compliance could void user's authority to operate the equipment.

Navigation menu